MPWS: could not bind to any port

Similar Questions

• MPWS: could not bind to any prot

  Good day! Have installed the latest version of Adobe museand the problem does not open some page (ctrl+ SHIFT+ e()

  Views Errors like this: MPWS: has no link to the prot.

  Hello

  Please check your network connection or any anti-anti-virus/firewall if they block access?

  Can you please try to create a new site and preview to see if the error still persists?

  Also try changing your default browser.

  Kind regards

  Akshay

• Configure Apache HTTP Srvr for WLS12c error - "address already in use: make_sock: could not bind to address 80.

  Hello the Experts of Oracle.

  I already have

  1. installed the Apache HTTP Server (with libraries)
  2. Downloaded the Plugin of Apache WLS12c
  3. copied the plugin files into the appropriate directories.
  4. Modify the httpd.conf (see below)

  At the present time, I try to start the Apache HTTP server and runs in an unexpected error.

  WHY APACHE ATTEMPTS TO LISTEN ON PORT 80. ?  I've SPECIFIED the PORT 8888

  Question: How to go beyond the error.   -| "Address already in use: make_sock: could not bind to address 80 '

  My server is 192.168.1.21.  In my view, that it has ESTABLISHED processes.  Yet, he reports, that it cannot start.

  

  Here is the content of the httpd.conf file.  My customizations are in Red.

  #

  # This is the main Apache HTTP server configuration file.  It contains the

  configuration directives # that give the server its instructions.

  See # < URL: http://httpd.Apache.org/docs/2.4/ > for more information.

  # See especially

  # < URL: http://httpd.Apache.org/docs/2.4/mod/directives.html >

  # for an analysis of each configuration directive.

  #

  # Do NOT simply read the instructions here without understanding

  # what they do.  They are there only as advice or reminders.  If you do not know

  # consult the online documentation. You have been warned.

  #

  # Configuration and logfile names: If the file names that you specify for a lot

  number of files in server control begin by "/" (or "drive: / 'for Win32 '), the

  # server uses this explicit path.  If filenames do * not * start

  # with "/", the value of ServerRoot directive is preceded by - both "logs/access_log".

  # with ServerRoot set to "/ usr/local/apache2" will be interpreted by the

  # Server as "/ usr/local/apache2/logs/access_log", considering that "/ logs/access_log".

  # will be interpreted as "/ logs/access_log".

  #

  # ServerRoot: The top of the directory under which the server tree

  # configuration, error and the log files are kept.

  #

  # Do not add a bar slash at the end of the directory path.  If you point

  # ServerRoot to non-local disk, remember to choose a local drive on the

  # Directive Mutex, if based on mutex files are used.  If you want to share the

  # ServerRoot even for several demons httpd, you will need to change to

  # PidFile less.

  #

  ServerRoot "/ usr/local/apache2.

  #

  # PidFile: The file in which the server should record its process

  ID # when it starts.

  #

  PidFile ' / usr/local/apache2/logs/httpd.pid '.

  #

  # Mutex: Allows you to set the mutex mechanism and the mutex file directory

  # for individual mutex, or change the default global values

  #

  # Uncomment and change the directory if mutexes are based on files and the default

  # mutex file directory is not on a local disk or is not suitable for some

  # other reason.

  #

  # Default Mutex: newspapers

  #

  # Listen: Allows you to bind Apache to specific IP addresses and/or

  ports #, instead of the default value. See also the < VirtualHost >

  directive #.

  #

  # Change this to listen on specific IP addresses below for

  # prevent Apache glomming on all related IP addresses.

  #

  # Example-> look 12.34.56.78:80

  # Listen api.astcorporation.com:8001

  Listen 8888

  #

  # Dynamic Shared Object (DSO) Support

  #

  # To be able to use the features of a module that was built as a DSO you

  # duty place corresponding 'LoadModule' lines at this location until the

  # directives that it contained are actually available _avant_, that they are used.

  # Modules statically compiled (those listed by "httpd-l") is not necessary

  # to be responsible here.

  #

  # Example:

  # LoadModule foo_module modules/mod_foo.so

  #

  LoadModule authn_file_module modules/mod_authn_file.so

  #LoadModule authn_dbm_module modules/mod_authn_dbm.so

  #LoadModule authn_anon_module modules/mod_authn_anon.so

  #LoadModule authn_dbd_module modules/mod_authn_dbd.so

  #LoadModule authn_socache_module modules/mod_authn_socache.so

  LoadModule modules/mod_authn_core.so authn_core_module

  LoadModule modules/mod_authz_host.so authz_host_module

  LoadModule modules/mod_authz_groupfile.so authz_groupfile_module

  LoadModule modules/mod_authz_user.so authz_user_module

  #LoadModule authz_dbm_module modules/mod_authz_dbm.so

  #LoadModule authz_owner_module modules/mod_authz_owner.so

  #LoadModule authz_dbd_module modules/mod_authz_dbd.so

  LoadModule modules/mod_authz_core.so authz_core_module

  LoadModule modules/mod_access_compat.so access_compat_module

  LoadModule auth_basic_module modules/mod_auth_basic.so

  #LoadModule auth_form_module modules/mod_auth_form.so

  #LoadModule auth_digest_module modules/mod_auth_digest.so

  #LoadModule allowmethods_module modules/mod_allowmethods.so

  #LoadModule file_cache_module modules/mod_file_cache.so

  #LoadModule cache_module modules/mod_cache.so

  #LoadModule disk_cache_module modules/mod_cache_disk.so

  #LoadModule cache_socache_module modules/mod_cache_socache.so

  #LoadModule socache_shmcb_module modules/mod_socache_shmcb.so

  #LoadModule socache_dbm_module modules/mod_socache_dbm.so

  #LoadModule socache_memcache_module modules/mod_socache_memcache.so

  #LoadModule macro_module modules/mod_macro.so

  #LoadModule dbd_module modules/mod_dbd.so

  #LoadModule dumpio_module modules/mod_dumpio.so

  #LoadModule buffer_module modules/mod_buffer.so

  #LoadModule ratelimit_module modules/mod_ratelimit.so

  LoadModule modules/mod_reqtimeout.so reqtimeout_module

  #LoadModule ext_filter_module modules/mod_ext_filter.so

  Request_module modules/mod_request.so #LoadModule

  #LoadModule include_module modules/mod_include.so

  LoadModule modules/mod_filter.so filter_module

  #LoadModule substitute_module modules/mod_substitute.so

  #LoadModule sed_module modules/mod_sed.so

  Modules/mod_deflate.so deflate_module #LoadModule

  LoadModule mime_module modules/mod_mime.so

  LoadModule log_config_module modules/mod_log_config.so

  #LoadModule log_debug_module modules/mod_log_debug.so

  #LoadModule logio_module modules/mod_logio.so

  LoadModule env_module modules/mod_env.so

  #LoadModule modules/mod_expires.so expires_module

  LoadModule headers_module modules/mod_headers.so

  #LoadModule unique_id_module modules/mod_unique_id.so

  LoadModule setenvif_module modules/mod_setenvif.so

  LoadModule modules/mod_version.so version_module

  #LoadModule remoteip_module modules/mod_remoteip.so

  #LoadModule modules/mod_proxy.so proxy_module

  Modules/mod_proxy_connect.so proxy_connect_module #LoadModule

  Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule

  Modules/mod_proxy_http.so proxy_http_module #LoadModule

  #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so

  #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so

  #LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so

  #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so

  Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule

  #LoadModule proxy_express_module modules/mod_proxy_express.so

  #LoadModule session_module modules/mod_session.so

  #LoadModule session_cookie_module modules/mod_session_cookie.so

  #LoadModule session_dbd_module modules/mod_session_dbd.so

  #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so

  #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so

  #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so

  #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so

  #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so

  LoadModule modules/mod_unixd.so unixd_module

  #LoadModule dav_module modules/mod_dav.so

  LoadModule status_module modules/mod_status.so

  LoadModule autoindex_module modules/mod_autoindex.so

  #LoadModule info_module modules/mod_info.so

  #LoadModule cgid_module modules/mod_cgid.so

  #LoadModule dav_fs_module modules/mod_dav_fs.so

  #LoadModule vhost_alias_module modules/mod_vhost_alias.so

  #LoadModule modules/mod_negotiation.so negotiation_module

  LoadModule modules/mod_dir.so dir_module

  #LoadModule actions_module modules/mod_actions.so

  Modules/mod_speling.so speling_module #LoadModule

  #LoadModule userdir_module modules/mod_userdir.so

  LoadModule alias_module modules/mod_alias.so

  #LoadModule rewrite_module modules/mod_rewrite.so

  # Added on 23/09/2015 | -enabling reverse proxy requests for users of WLS12c

  LoadModule modules/mod_wl_24.so weblogic_module

  < IfModule unixd_module >

  #

  # If you want httpd to run as a different user or group, you must run

  # httpd as root initially and it will pass.

  #

  # Group / user: the name (or #number) of the user/group to run httpd as.

  # It is generally advisable to create a dedicated and aggregatable for user

  # httpd, as with most system services are running.

  #

  Demon of the user

  Daemon group

  < / IfModule >

  Server configuration # 'hand '.

  #

  # The directives in this section implement the values used by the 'hand '.

  # Server, which meets all demands that are not managed by a

  definition of # < VirtualHost >.  These values also provide defaults for

  # all < VirtualHost > containers you can set later in the file.

  #

  # All these directives may appear inside containers < VirtualHost >,.

  # in which case the value default parameters will be substituted for the

  virtual host of # being defined.

  #

  #

  # ServerAdmin: Your address, where problems with the server should be

  # e-mail.  This address appears on some generated by the page server, such

  # as error documents.  for example [email protected]

  #

  ServerAdmin [email protected]

  #

  # ServerName gives the name and the port used by the server to identify itself.

  # This can often be determined automatically, but we recommend that you specify

  # explicitly to avoid problems during startup.

  #

  # If your host doesn't have a registered DNS name, enter its IP address here.

  #

  Servername 192.168.1.21

  #

  # Deny access to the whole of the file system of your server. You must

  # explicitly allow access to web content directories in other

  blocks of # < directory > below.

  #

  < directory / >

  AllowOverride none

  Need all refused

  < / Book >

  #

  # Note that, from this point forward you must precisely enable

  features special # to be enabled - so if something doesn't work not as

  # you might expect, make sure that you have specifically enabled it

  # below.

  #

  #

  # DocumentRoot: The directory you are going to use your

  documents #. By default, all requests are taken from this directory, but

  aliases and symlinks # can be used to point to other locations.

  #

  DocumentRoot "/ usr/local/apache2/htdocs.

  < directory "/ usr/local/apache2/htdocs" >

  #

  # Possible values for the Options directive are "None", "All."

  # or any combination of:

  # Indexes includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

  #

  # Note that "MultiViews" must be named * explicitly *-'all Options '.

  # is not give it to you.

  #

  # The Options directive is complex and important.  Please see

      # http://httpd.Apache.org/docs/2.4/mod/core.HTML#options

  # For more information.

  #

  Options Indexes FollowSymLinks

  #

  # AllowOverride controls what directives may be placed in .htaccess files.

  # It can be 'All', 'None', or any combination of key words:

  # AllowOverride FileInfo AuthConfig Limit

  #

  AllowOverride None

  #

  # Controls who can get stuff from this server.

  #

  Need of all granted

  < / Book >

  #

  # DirectoryIndex: sets the file Apache will serve if a directory

  # is requested.

  #

  < IfModule dir_module >

  DirectoryIndex index.html

  < / IfModule >

  #

  # The following lines prevent the .htaccess and .htpasswd files to be

  # seen by customers of the Web.

  #

  < files ".ht *" >

  Need all refused

  < / files >

  #

  # ErrorLog: The location of the error log file.

  # If you do not specify an ErrorLog directive in a < VirtualHost >

  # container, error messages related to this virtual host will be

  # logged here.  If you * define an error for a < VirtualHost > log file

  container of #, that host errors will be logged there and not here.

  #

  ErrorLog "logs/error_log".

  #

  # LogLevel: Control the number of messages in the error_log.

  # Possible values include: debug, info, notice, warn, error, crit,.

  # emerg, alert.

  #

  LogLevel debug

  < IfModule log_config_module >

  #

  # The following directives define some nicknames format for use with

  # a directive CustomLog (see below).

  #

  "LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"

  "LogFormat '%%u %t \"%r\ hour' % > s %b "commune

  < IfModule logio_module >

  # You must enable mod_logio.c use %I and frequency

  "" LogFormat '%%u %t \"%r\ hour' % > s %b \"%{Referer}i\ "\"%{User-Agent}i\ "%I %o "combinedio

  < / IfModule >

  #

  # The location and format of the access (Common Log Format) log file.

  # If you do not have any logfiles access set in a < VirtualHost >

  container of #, they will be saved here.  On the other hand, if you * do *.

  # define per - < VirtualHost > access logfiles, transactions will be

  # logged there and * not * in this file.

  #

  CustomLog "logs/access_log" common

  #

  # If you prefer a log file of access, agent, and referer information

  # (Combined logfile format) you can use the following directive.

  #

  #CustomLog "logs/access_log" combined

  < / IfModule >

  < IfModule alias_module >

  #

  # Redirect: Allows to tell clients the documents used for

  # exist in your server's namespace, but no more. The customer

  # make a new request for the document at its new location.

  # Example:

  # Redirect permanent/foo http://www.example.com/bar

  #

  # Alias: Maps web paths into paths of file system and is used to

  # access content that don't live under the DocumentRoot directive.

  # Example:

  # Alias /webpath/full/filesystem/path

  #

  # If you include a trailing / on /webpath, then the server will be

  # require that he be present in the URL.  It is also likely that

  # duty provide a < Directory > section to allow access to

  # the path to the file system.

  #

  # ScriptAlias: This controls which directories contain server scripts.

  # ScriptAliases are essentially the same as assumed names, except that

  # documents in the target directory are treated as applications and

  # executed by the server on demand, rather than as documents sent to the

  client of #.  The same regulation on flight "/" applies to the ScriptAlias

  # as for the Alias directives.

  #

  ScriptAlias/cgi-bin / "/ usr/local/apache2/cgi-bin /".

  < / IfModule >

  < IfModule cgid_module >

  #

  # ScriptSock: On threaded servers, refers to the access path to the UNIX

  decision # used to communicate with the CGI mod_cgid daemon.

  #

  #Scriptsock cgisock

  < / IfModule >

  #

  # "/ usr/local/apache2/cgi-bin" just need to replace your ScriptAlias

  # CGI directory exists, if you have set up.

  #

  < directory "/ usr/local/apache2/cgi-bin" >

  AllowOverride None

  None of the options

  Need of all granted

  < / Book >

  < IfModule mime_module >

  #

  # TypesConfig points to the file containing the list of mappings from

  # MIME file extension - type.

  #

  TypesConfig conf/mime.types

  #

  # AddType allows you to add or replace the MIME configuration

  # the file specified in TypesConfig for specific file types.

  #

  #AddType application/x-gzip .tgz

  #

  # AddEncoding allows you to have certain browsers uncompress

  # information on the fly. Note: Not all browsers support this.

  #

  #AddEncoding x-compress. Z

  #AddEncoding x-gzip .gz .tgz

  #

  # If the AddEncoding directives above are commented out, then you

  # should probably define these extensions to indicate media types:

  #

  AddType application/x-compress. Z

  AddType application/x-gzip .gz .tgz

  #

  # AddHandler allows you to map certain "manipulators": file extensions

  # No actions associated with the file type. It can be either integrated into the server

  # or added to the directive of the Action (see below)

  #

  # To use CGI outside of ScriptAlias directories scripts:

  # (You will also need to add "ExecCGI" to the "Options" directive.)

  #

  #AddHandler cgi-script .cgi

  # For maps of type (negotiated resources):

  #AddHandler type-plan of the var

  #

  # Filters allow you to process content before sending it to the client.

  #

  # To parse .shtml for server-side includes (SSI) files:

  # (You will also need to add "Includes" the "Options" directive.)

  #

  #AddType text/html .shtml

  #AddOutputFilter INCLUDES .shtml

  < / IfModule >

  #

  # The mod_mime_magic module allows the server to use various boards of the

  content of the file itself to determine its type.  The MIMEMagicFile

  # directive tells the module where the definitions of suspicion.

  #

  #MIMEMagicFile conf/magic

  #

  # Customizable error responses come in three flavors:

  ((# 1) text 2) local redirects 3) external redirects

  #

  # Examples:

  #Error Document 500 "The server made a boo boo".

  #Error Document 404 Missing.html

  #Error Document 404 "/cgi-bin/missing_handler.pl"

  #Errordocument 402 http://www.example.com/subscription_info.html

  #

  #

  # MaxRanges: Number of channels in a Maximum request before

  # return the resource, or one of the extraordinary

  # values 'default', 'none' or 'unlimited '.

  # Default is to accept 200 beaches.

  Unlimited #MaxRanges

  #

  # EnableMMAP and EnableSendfile: on systems that support.

  projection in memory # or the sendfile syscall can be used to deliver

  # files.  Usually, this improves the performance of the server, but must

  # turn off when mounted network is served

  # file systems or if support for these functions is also

  # broken on your system.

  # Default: EnableMMAP, EnableSendfile Off

  #

  #EnableMMAP off

  #EnableSendfile on

  # Additional configuration

  #

  # The configuration files in the conf/extra/directory can be

  # included to add additional features or change the default configuration

  # the server, or you can simply copy their content here and change as

  # necessary.

  # Server-pool management (MPM specific)

  #Include conf/extra/httpd-mpm.conf

  # Multilingual error messages

  #Include conf/extra/httpd-multilang-errordoc.conf

  # Entries to the fancy directory

  #Include conf/extra/httpd-autoindex.conf

  # Language settings

  #Include conf/extra/httpd-languages.conf

  # User directories

  #Include conf/extra/httpd-userdir.conf

  # Info in real time on the applications and configuration

  #Include conf/extra/httpd-info.conf

  # Virtual hosts

  #Include conf/extra/httpd-vhosts.conf

  # Local access to the manual for the Apache HTTP Server

  #Include conf/extra/httpd-manual.conf

  # Distributed authoring and versioning (WebDAV)

  #Include conf/extra/httpd-dav.conf

  # Various default settings

  #Include conf/extra/httpd-default.conf

  # Configure mod_proxy_html to understand HTML4/XHTML1

  < IfModule proxy_html_module >

  Include the conf/extra/proxy-html.conf

  < / IfModule >

  # Secure connections (SSL/TLS)

  #Include conf/extra/httpd-ssl.conf

  #

  # Note: The following text should be present to support

  # start without SSL on platforms without equivalent/dev/random

  but # a statically compiled in mod_ssl.

  #

  < IfModule ssl_module >

  SSLRandomSeed startup builtin

  SSLRandomSeed connect builtin

  < / IfModule >

  #

  # Uncomment on the below to deal with user agents that deliberately

  # violate open standards by abusing DNT (DNT * must * be a specific)

  choice of end-users #)

  #

  # < IfModule setenvif_module >

  #BrowserMatch "MSIE 10.0"; bad_DNT

  # < / IfModule >

  # < IfModule headers_module >

  #RequestHeader unset DNT env = bad_DNT

  # < / IfModule >

  #= WLS 12 c routing Configuration. Seven 2015 =.

  # Added to fix the mistakes of transport of myAST resulting from the use of deprecated SSL 2.0 Mobile Security.

  # The following has been added to activate the reverse proxy requests from users of WLS 12 c-based applications.

  #-8002 port = SSL listener for api.astcorporation.com (managed server)

  # - the port 443 = SSL listener for myast.astcorporation.com (managed server)

  #

  # Phases of deployment:

  API.astcorporation.com:8001/myast # (1).

  # VirtualHost (2) Setup / WeblogicCluster guidelines to register myast.astcorporation.com:443

  # 3-test api & myast

  # 4-regenerate private certificate + all certificates.

  # Minimum nonclustered directive specifies WebLogic IP + port.

  < IfModule mod_weblogic.c >

  WebLogicHost 192.168.1.43

  WebLogicPort 8002

  Debugging now

  DebugConfigInfo WE

  Newspapers/myAst12c_WLS_error_log WLLogFile

  WLS-JSESSION-ID WLCookieName

  < / IfModule >

  # Proxy request per path Note: SetHandler specifies the handler for the plug-in module for the Apache HTTP Server

  < /myast location >

  SetHandler weblogic-Manager

  ErrorPage http://www.astcorporation.com/services/middleware/Middleware_Services.html

  < / location >

  # Added proxy

  ProxyPreserveHost off

  #ProxyPass /api http://API.astcorporation.com:8001 / myast

  #ProxyPass /myast http://myast.astcorporation.com

  I found my answer after I posted.  I'll leave it here to help others...

  The list of all instances of Apache that were started

  • ' ps - ef | grep apache. "

  Kill the persistent process

  

• WebServiceConnection.getJaxWSPort () - could not determine the wsdl ports

  Hey all,.

  I have an ADF application that communicates with a Web Service through a Web Service proxy. I have to configure the Web Service end point when running, so I followed the steps described in this blog: http://biemond.blogspot.com/2012/02/changing-your-adf-connections-in.html

  This works very well when building the Web Service proxy using the constructor that takes the WSDL URL and port as arguments:

  
  

  Context ctx is ADFContext.getCurrent () .getConnectionsContext ();.

  WebServiceConnection wsc = (WebServiceConnection) ctx.lookup ("SpiderPawsService");       

  SpiderPawsService spiderPawsService = new SpiderPawsService (wsc.getWsdlUrl (), wsc.getModel () .getName ());

  SpiderPawsPort spiderPawsPort = spiderPawsService. getPawsPart();

  However, an exception is thrown stating "could not determine the wsdl ports" when getting a handle on the Web Service proxy by doing this:

  SpiderPawsService spiderPawsService = wsc.getJaxWSPort (SpiderPawsService .class);

  Now, you might ask, why not just use the first approach? Well, the Web Service requires authentication and currently the username and password is read from a properties file encrypted and sent in the header of SOAP using a SOAPHandler. However, the power that the username and password are configurable as the end point. When you change Web Service endpoint in WebLogic Enterprise Manager, I noticed that you can supply a user name and password. However, I looked at the methods provided by the WebServiceConnection and I've not found a way to get a handle on the credentials. This means that I can't look at the information to pass to the Web Service. So, I thought that maybe by using the second approach, the container will create the Web Service proxy and could inject the credentials for me so that I can't provide them explicitly. Any thoughts or ideas?

  Environment:

  JDeveloper 11.1.1.6.0

  Oracle Enterprise Manager 11.1.1.6.0

  Thank you

  Bill

  I think you should use it like this: (you should get an object of Type Port, not the Service itself)

              Context ctx = ADFContext.getCurrent().getConnectionsContext();
              WebServiceConnection wsc =
                  (WebServiceConnection)ctx.lookup("SpiderPawsService");
              SpiderPawsPortType portType = wsc.getJaxWSPort(SpiderPawsPortType.class);
  

• Octoshape streaming services: could not bind to the local host. Please check your firewall configuration

  Original title:

  Octashape streaming system

  Hello

  A dialog box appears on my screen:
  Octoshape streaming services: could not bind to the local host. Please check your firewall configuration

  What should I do?

  And if this does not work between the firewall what is the solution?

  Thank you!

  [Moved from the community centre of Participation]

  You seem to have installed a useless program, Octoshape.

  http://www.bing.com/search?q=Octoshape

  You should be able to remove it from programs and features (or the list of installed programs, depending on your version of Windows.)

  Don

• Could not get the HDMI port to work on the HP touchsmart.

  I have a HP Touchsmart 600-1265 with an HDMI port. I have connected the computer to the TV but can not get any audio/video to display. I don't know if you need to activate the port or what you need to do to make it work.

  When I push the A / V button above the HDMI port it shows the computer displays and below, it is then them a VGA and HDMI boxes but when I scroll down and select HDMI the screen just empties for a few seconds and then back on the computer screen.

  What should I do to make this work?

  Yes, the entry also. This is what the switch you mentioned.

  See you soon,.

• Integrator bulk add to the problem domain - all settings seem correct but put in error: ' GRAVE: could not connect to &lt; ourservername &gt;: port.

  While trying to record to bulk add/replace, I get an error back that says:

  "

  logError com.endeca.BulkLoad.BulkIngester

  GRAVE: Unable to connect to ourservername:15150

  "

  We use short Integrator 3.1.1 and short Server 7.6. Short Server runs on Oracle Linux 64-bit. Local Integrator on Windows 7 client. Running server on a cluster of 3 short. In my view, this Oracle is in Production mode.

  I made sure the file EndecaServer.properties has the short name (not full) and that the/etc/hosts is listing the actual name of the server first in the list as recommended here: découverte short Information 7.6 (Oracle 64-bit Linux) Server

  Can I get the Reset Data Domain runs correctly.

  The message context is the following:

  ------------------------------------------ Error details -------------------------------------------

  Component [add/replace in bulk record: BULK_ADD_REPLACE_RECORDS] finished with ERROR status.

  Component run before initialization failed.

  Failed with the following IntegratorException:

  com.endeca.clover.adapters.exception.IntegratorException: Exception creating the BulkIngester:

  java.io.IOException: cannot connect to uspsicvslx1055:15151

  Failed with the following IntegratorException:

  com.endeca.clover.adapters.exception.IntegratorException: Exception creating the BulkIngester:

  java.io.IOException: cannot connect to uspsicvslx1055:15151

  ----------------------------------------------------------------------------------------------------

  The/etc/hosts file now looks like this:

  10.2.276.28 myhostname.oursite.com myhostname

  127.0.0.1 localhost

  This could be the cause of this error beyond what I have already addressed?  Y at - it somewhere that I have to check. It seems strange that I should not use the fully qualified name in the EndecaServer.properties file - but it's what 7.6 version requires, correct?

  Any ideas or other places I need to check?

  This message indicates that something has started an acquisition in bulk and never finished (or finished) correctly.

  The logs on the server of short would certainly cause first as.to some details.

  To fix, you can bounce the server short process or potentially to use the command line or web services to disable and then re-enable the data domain

  Sent from my Verizon Wireless 4 G LTE Smartphone

• Error 0 x 80040201 event could not rely on any of the subscribers. The installation program will end now

  I get this error when you try to uninstall Creative Sound Blaster Audigy 2 ZS. Uninstall stops around 60%, then the error message (see post title), then Setup ends.

  I have now all sound and cannot take place.

  I looked online and there were a few messages mentioning reg fixes of corruption that had solved the problem. Recently, I installed a couple of mounting aps, so I thought that this feeling a bit made of new video. So I downloaded ccleaner v 3.05.1409 CNET, done a reg scan and set ONLY the entries that had to do with Creative, rebooted, but I still get the error if I try to modify, repair, or uninstall the Creative suite. (I don't have ccleaner difficulty all other entries) So the clean reg did not no diff.

  Now I can't install or uninstall.

  I am running XP SP3 all updates. Other than the sound, my system works perfectly.

  Help!

  Thank you!

  Mark

  Hello

  To resolve the above error message, follow the procedures below.

  a. close all open windows and programs.

  b. Click Start and then click Run. The Run dialog box is displayed.

  (c) as shown in this illustration, type MSCONFIG and click OK.

  d. the System Configuration utility appears. Click BOOT. INI, check the "/ SAFEBOOT" option, and then click OK.

  

  e. When you are prompted to restart the computer. Click on restart.

  f. the computer restarts in safe mode. (This may take several minutes, and its display will appear different from normal).

  g. mode safe mode, click Start, Control Panel, then add/remove programs. Select the programs you wish to uninstall, for example, Sound Blaster Audigy 2. Must uninstall successfully without error "the installer cannot invoke any of the subscribers.

  h. once the uninstall is complete, close the control panel and open windows explore.

  i. in Windows Explorer, click on TOOLS, then Folder Options. In Folder Options, click the view tab and choose the option view the hidden files and folders, under Advanced Options. Also, uncheck Hide extensions of the file types that you want to know. Click on apply, then OK.

  j. in Windows Explorer, navigate to the folder C:\Program Creative , while C: is the drive where the software is installed and remove subfolders associated with the software you are trying to uninstall. If you have a single creative hardware, you can remove the creative brief.

  j. in Windows Explorer, look for C:\Program InstallShield Installation Information------folder. In this folder, you will see strange named directories that contain information about the installation of the application and the material / uninstall information.

  

  To find which directories contain information on Creative products. Open a directory at a time and watch the installation. INI file. This file should open in Notepad.

  In the file, locate the AppName =, for example, the AppName =Creative MediaSource. If the installation program. INI contains information on the creative product you are trying to remove, remove the directory as the Setup program. INI has been found. Continue to go through all the directories and remove the most creative in the InstallShield Installation informationfolder n.

  k. after the creation of directories are deleted. Restart the computer in Normal mode. To do this, repeat steps 1 to 5, but in step 4, uncheck "/ SAFEBOOT"

  a. restart the computer and reinstall the application.

  Refer to this article for help:
  http://support.creative.com/kb/showarticle.aspx?url=http://Ask.Creative.com:80/SRVS/cgi-bin/WEBCGI.exe/,/?St=425,E=0000000001318352054,K=3345,SXI=5,Answer51608=obj(51608):obj(51637)

• Error: Could not find the WSDL port defined for the Service

  Hello

  I am facing error below when calling the partner WSDL:

  Oracle.Fabric.Common.FabricInvocationException: Cannot find the WSDL port defined for the service.

  Can someone guide me what could be the exact problem?

  * I can't ping this host.

  Thank you

  Richa

  Puneet salvation,

  I am able to access from the WSDL browser and value of the location in composite.xml is correct.

  Kind regards.

• Error modem usb device trying to stall usb fax modem fax modem usb sytem. system could not find driver any idea on how to down load the driver I

  Usb modem error device tries to install usb fax modem usb fax modem cannot find system the pilot any idea on how to load the driver?

  Hello

  What brand / model of the fax machine?  What is a printer/Fax?

  Download the software complete features driver from the manufacturer's website.  It contains the fax driver.

  What version of Windows are you using?

• HP Photosmart plus series B209: could not find the usb port to connect to my laptop where to find no. on this this small opening.

  Please help, I am trying to set up wireless and can not find the place to put the usb cable to the printer. Thank you!

  Very appreciated, classified into usb!

• My HP 14 laptop is not recognizing the usb ports and wifi at startup.

  During the last few days I been dealing with the issue that my laptop does not recognize the usb ports and wifi. After several reboots, it works fine. My drivers are up to date, so I don't know why, I'll have this terrible problem.

  Welcome @hildergarn,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi and USB ports on your laptop from HP.

  My first suggestion would be to use the wireless network troubleshooting and Internet tool. At the bottom it will ask you questions to help you diagnose the problem.

  Please take a look at this great Charter called troubleshooting wireless network and Internet. This document will help you to solve the problem of Wi - Fi.

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  You have uninstalled the driver in Device Manager?

  Please try to uninstall the driver in Device Manager by using the following steps:

  • Go to the Device Manager.
  • Expand network adapters.
  • Right-click on all NICs individually.
  • Click on uninstall.
  • Restart the laptop twice.

  How many devices you try to connect?

  What you are trying to connect via USB?

  Are - what you happened to try to use the HP Support Assistant?

  Here is a link to the HP Support Assistant, if you not him have not yet tried. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  Here are other troubleshooting steps that may help too. If the USB device does not appear in Device Manager, then it might be a question of power requirement. Unplug the machine and perform the following steps until the device is detected:

  • Reboot the laptop

  • Plug in and wait five seconds.

  • If the device does not appear, try connecting to another USB port.

  • If the USB device is displayed in Device Manager after you connect the cable to a different port, then uninstall and reinstall the software of USB device driver.

  If the device is not recognized in any port, unplug it and go to the next step.

  • Open the Device Manager.

  • Double-click Bus USB controllers,

  • Double-click on a USB root hub,

  • Click the Power tab

  • Click on properties of power supply (if it is displayed).

  Devices need that are connected to the hub are shown, as well as the power they have. If the total displayed power is more than 500 mA, remove the devices and use a hub powered.

  • Continue looking at the properties of the power of each USB hub. If the total power required exceeds the total available power for the hub, then remove a device on this hub to a decrease in the number of consumption.

  • Plug in and wait five seconds. If the device is not recognized, unplug and go to the next step.

  Please note; Remove USB cables at high speed that are more than 3 m (9.8 ft) in length and use cables at high speed that are shorter than 3 m.

  Source: troubleshooting USB connections - please look at this document and follow all the steps in it.

  When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you do not want to show your appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If please re-post and let me know the detailed results of all the troubleshooting steps in this post. Could you please provide me with your model number (How can I find my model number or product number?) also.

  Can't wait to hear from you!

  Have a great day!

• I try to get Firefox to open Vuze when I click on a magnet link, I get the following message: Firefox doesn't know how to open this address, because the Protocol (loving) is not associated with any program. tell me the solution

  When I try to open a torrent using magnet, I get the following message. Firefox doesn't know how to open this address because the Protocol (loving) is not binding to any program.

  I had this problem and just reinstalled Firefox. Problem solved. In my case, I believe that it is through the installation of FlashGet. Although I uninstalled FlashGet, it had outstripped the Magnet links / Protocol. I hope this helps you with your instance. Fortunately, I had Setup for my version of Firefox (7.0.1) registered and used that but you might need to search for your current version or install a later version

• Cannot import songs in Windows Movie Maker, we get an error "could not import.

  Original title: wrong to import the music after hard drive now

  I downloaded the songs from Amazon in the past and import it onto a movie from Movie Maker without problem.  I had to put in a new hard drive on my computer and now I cannot import new songs.  Can I use the old songs that I downloaded (I recorded on a USB key), but when I try to add new songs I get an error message "could not import.  Any ideas what I am doing wrong?

  Hi SHennessey,

  (1) what is the complete error message you receive?

  (2) what is the format of the file?

  Method 1: For files that can be imported into Windows Movie Maker, see the link below.

  Can what types of files I import?

  Method 2: To check your video filter settings, follow the steps mentioned below

  (a) in Windows Movie Maker go to the Tools menu

  (b) click on Optionsand then click the compatibility tab

  Now, check if the problem persists

  See the link below

  Problems with importing files into Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/problems-importing-files-into-Windows-Movie-Maker

• I get this message: "the remote computer could not be found" when I try to run Task Scheduler.

  * Original title: Task Scheduler

  When I try to run Task Scheduler, I get this message: "the remote computer could not be found" any help would be appreciated.

  Hello

  Start button-> type to find Services at top and double click on Services

  Locate Task Scheduler - right-click - Select start.

  You may need to redefine ALL the Services on their default values.

  Windows 7
  http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989

  Windows 7 Service Pack 1
  http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">