HP Photosmart plus series B209: could not find the usb port to connect to my laptop where to find no. on this this small opening.

Please help, I am trying to set up wireless and can not find the place to put the usb cable to the printer. Thank you!

Very appreciated, classified into usb!

Tags: HP Printers

Similar Questions

  • Photosmart HP 6510 - can't find the USB port to connect to the computer. It is right in front of my face?

    Photosmart IHP 6510 - can't find the USB port to connect to the computer. It is right in front of my face? I can't find a diagram online. do not have wireless capability. With the help of MacPro with Snowleopard.Thanks.

    Hello

    The usb port is not #22. as seen in the picture. It's in the back of the printer on the side right hiand.

    Best regards

    ERICO

  • Says Windows media player could not burn the disc check your connections

    Original title: Media Player

    I have a new computer with Windows Media Player so I decided to burn some DVD reviews ' and registered copies are hanging out and a box appears and says could not burn the disk check your connections etc. Please advised? Thanks for your help, I did everything and it could be a bad software here. I use windows 7.

    Hi George,.

    Welcome to the Microsoft community.

    It seems that you are facing problems when burning the DVD with Windows Media Player. It would be great if you can answer the following questions:

    1 have had any changes made on the computer before the show?

    2. What is the full and exact error message?

    To resolve this issue, follow these methods:

    Method 1:

    I suggest to see the link and try to run the Troubleshooter:

    Open the troubleshooting Windows Media Player settings Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

    Method 2:

    See the article and check if that helps:

    Burn a CD or DVD in Windows Media Player

    http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player

    I hope this helps. Let us know if you need more assistance.

  • WebServiceConnection.getJaxWSPort () - could not determine the wsdl ports

    Hey all,.

    I have an ADF application that communicates with a Web Service through a Web Service proxy. I have to configure the Web Service end point when running, so I followed the steps described in this blog: http://biemond.blogspot.com/2012/02/changing-your-adf-connections-in.html

    This works very well when building the Web Service proxy using the constructor that takes the WSDL URL and port as arguments:


    Context ctx is ADFContext.getCurrent () .getConnectionsContext ();.

    WebServiceConnection wsc = (WebServiceConnection) ctx.lookup ("SpiderPawsService");       

    SpiderPawsService spiderPawsService = new SpiderPawsService (wsc.getWsdlUrl (), wsc.getModel () .getName ());

    SpiderPawsPort spiderPawsPort = spiderPawsService. getPawsPart();

    However, an exception is thrown stating "could not determine the wsdl ports" when getting a handle on the Web Service proxy by doing this:

    SpiderPawsService spiderPawsService = wsc.getJaxWSPort (SpiderPawsService .class);

    Now, you might ask, why not just use the first approach? Well, the Web Service requires authentication and currently the username and password is read from a properties file encrypted and sent in the header of SOAP using a SOAPHandler. However, the power that the username and password are configurable as the end point. When you change Web Service endpoint in WebLogic Enterprise Manager, I noticed that you can supply a user name and password. However, I looked at the methods provided by the WebServiceConnection and I've not found a way to get a handle on the credentials. This means that I can't look at the information to pass to the Web Service. So, I thought that maybe by using the second approach, the container will create the Web Service proxy and could inject the credentials for me so that I can't provide them explicitly. Any thoughts or ideas?

    Environment:

    JDeveloper 11.1.1.6.0

    Oracle Enterprise Manager 11.1.1.6.0

    Thank you

    Bill

    I think you should use it like this: (you should get an object of Type Port, not the Service itself)

                Context ctx = ADFContext.getCurrent().getConnectionsContext();
            WebServiceConnection wsc =
                (WebServiceConnection)ctx.lookup("SpiderPawsService");
            SpiderPawsPortType portType = wsc.getJaxWSPort(SpiderPawsPortType.class);

  • For some reason any, that my printer has enough work and when I plug in my camera to download images, the computer says it does not recognize the USB port, which could be the pronblem?

    My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

    My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

    When did this problem start? What did you change shortly before it all began?

    Please quote the exact text of the message you get, verbatim.

  • My HP 14 laptop is not recognizing the usb ports and wifi at startup.

    During the last few days I been dealing with the issue that my laptop does not recognize the usb ports and wifi. After several reboots, it works fine. My drivers are up to date, so I don't know why, I'll have this terrible problem.

    Welcome @hildergarn,

    Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi and USB ports on your laptop from HP.

    My first suggestion would be to use the wireless network troubleshooting and Internet tool. At the bottom it will ask you questions to help you diagnose the problem.

    Please take a look at this great Charter called troubleshooting wireless network and Internet. This document will help you to solve the problem of Wi - Fi.

    Have you tried to restore the BIOS?

    Have you tried to connect directly to the Modem/Router?

    You have uninstalled the driver in Device Manager?

    Please try to uninstall the driver in Device Manager by using the following steps:

    • Go to the Device Manager.
    • Expand network adapters.
    • Right-click on all NICs individually.
    • Click on uninstall.
    • Restart the laptop twice.

    How many devices you try to connect?

    What you are trying to connect via USB?

    Are - what you happened to try to use the HP Support Assistant?

    Here is a link to the HP Support Assistant, if you not him have not yet tried. Simply download and run the application and it will help with the software and drivers on your system that need updated.

    Here are other troubleshooting steps that may help too. If the USB device does not appear in Device Manager, then it might be a question of power requirement. Unplug the machine and perform the following steps until the device is detected:

    • Reboot the laptop

    • Plug in and wait five seconds.

    • If the device does not appear, try connecting to another USB port.

    • If the USB device is displayed in Device Manager after you connect the cable to a different port, then uninstall and reinstall the software of USB device driver.

    If the device is not recognized in any port, unplug it and go to the next step.

    • Open the Device Manager.

    • Double-click Bus USB controllers,

    • Double-click on a USB root hub,

    • Click the Power tab

    • Click on properties of power supply (if it is displayed).

    Devices need that are connected to the hub are shown, as well as the power they have. If the total displayed power is more than 500 mA, remove the devices and use a hub powered.

    • Continue looking at the properties of the power of each USB hub. If the total power required exceeds the total available power for the hub, then remove a device on this hub to a decrease in the number of consumption.

    • Plug in and wait five seconds. If the device is not recognized, unplug and go to the next step.

    Please note; Remove USB cables at high speed that are more than 3 m (9.8 ft) in length and use cables at high speed that are shorter than 3 m.

    Source: troubleshooting USB connections - please look at this document and follow all the steps in it.

    When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you do not want to show your appreciation for my efforts today, please take a second to click the Thumbs Up button below.

    If please re-post and let me know the detailed results of all the troubleshooting steps in this post. Could you please provide me with your model number (How can I find my model number or product number?) also.

    Can't wait to hear from you!

    Have a great day!

  • Can not use the USB ports on my Satellite P10

    I have a laptop Toshiba Satellite P10 3 years computer that has 3 USB ports. None of them works although the power is coming from them than my external mouse upwards but lights does not work. In Device Manager it says that everything is working ok IE all the drivers, etc. I was told that it's probably the motherboard?

    Maplins it's a software problem. I tried a PCI card with USB port but they no longer work. The PCI location is fine but as my wireless adapter card works from there ok. I restored the computer 3 times and each time the USB ports do not work.
    Any suggestions? I want to add an external mouse drive DVD etc...

    Any help appreciated... Mark

    Hello

    Did you use the clean Toshiba Recovery CD to restore the operating system on your laptop or have you installed the operating system from the original Windows CD.
    I advise to use the Toshiba Recovery CD because all the driver and patches installed on this CD.

    The USB ports provide a current of 500 ma, and it is a standard. If several external devices connected to ports needs more power as 500mA, then it of possible that the laptop does not detect USB devices several.

    In Device Manager, you may turn off the power save the unique option to the USB ports.
    You can do this in the properties of the USB port

    Additional I advise to use a USB hub with external power clean.
    These devices are not very expensive and will allow you to connect and use several devices together.

  • my system does not know the USB ports and the camera, win 7 x 64, asus k53z

    Thank you

    Hello

    1. are you not able to connect the device via the USB ports?

    2. What is the brand and model of the camera?

    Please provide us with more information on the issue, you face to help you.

    You can visit the link of the article of Microsoft that will guide you on how to ask questions below.

    Suggestions for a question on the help forums
    http://support.Microsoft.com/kb/555375

    You can run the Fixit and check if it helps.

    Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/

  • PHOTOSMART PLUS B209a-m: PHOTOSMART PLUS B209a-m does not print the data entered.

    Printer was working fine, but recently had a few power outages in 48 hours.  After the second blackout, we noticed that if we tried to copy and print something, what we would have would be a picture or a diagram of a post, for example I tried to print a tax document of our mortgage company.  The pre-printed outline was shaped did print, but the data that have been added by the mortgage company (name, address, etc.) do not have.

    If someone can guide me in the right direction to rectify this situation I would really appreciate it.

    Hi @Whitey16,

    Welcome to the HP Support forum.

    I understand that your printer HP Photosmart Plus all-in-one worked very well until you've had a few power outages. Since the outages, the printer has been printing a ' photo or diagram of a post "where to send print jobs to the printer on your computer Mac OS X 10.11 El Capitan. I would like to help with that.

    The first thing we want to do is to test the functionality of the printer without a computer. Try to print a report to ensure that the functions of the printer printer ok on its own.

    If the report of the State of the printer print, then we need to look at the software & drivers used by the computer.

    Then I would reset the printing on Mac system. Here is a document of support from Apple that you can use if you need help with that - reset the printing on your Mac system.

    Once the system has been reset you will need to add the printer back in. When you add the printer you want to be sure to choose the printer drivers and not the driver "Airprint" in the menu drop-down 'Use' on the window "Add" of the printer. Here is an another Apple su [document report that can help you with that - Add or remove a printer.

    Please let me know if that solves the problem, or if you need assistance.

    In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

    Thank you!

  • Could not get the HDMI port to work on the HP touchsmart.

    I have a HP Touchsmart 600-1265 with an HDMI port. I have connected the computer to the TV but can not get any audio/video to display. I don't know if you need to activate the port or what you need to do to make it work.

    When I push the A / V button above the HDMI port it shows the computer displays and below, it is then them a VGA and HDMI boxes but when I scroll down and select HDMI the screen just empties for a few seconds and then back on the computer screen.

    What should I do to make this work?

    Yes, the entry also. This is what the switch you mentioned.

    See you soon,.

  • Windows XP is not recognizing the USB Ports?

    My NetBook of Asus Windows XP does not see any USB device I plug. Everything was fine before I left on vacation. My return (netbook left alone in the House, nobody else uses) I plug in any device is recognized.

    It is also not recognize memory cards I plug in the memory card slot. This has all worked very well before.

    No removable disks are visible in disk management. Device Manager can't find no error in the sections of the USB. Check for material changes in DM solve either. Drivers seem to be ok from what I can tell.

    Of course, I restarted a sound all USB ports and the memory card with multiple devices.

    Help, please

    Hello

    Refer the article that could help you solve this problem.
    Advanced troubleshooting tips for General USB for Windows XP problems
    http://support.Microsoft.com/kb/310575

  • HP Envy m7-n109dx: after loading Windows 7 on a new drive on a HP Envy m7-n109dx it will not recognize the usb ports

    not sure that this area is for.

    Hello:

    I'm not sure what you mean in regard to this area, but this place is to explain in more detail the nature of your question.

    I see that HP did not include the USB3 drivers on your laptop support page, so the most likely reason that do not have USB3 ports is because you need to install the driver for the USB3.

    Use the one directly from Intel.  Download, unzip and run the setup.exe file.

    https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-Intel-C220-C610-chipset-family?product=65855

  • BlackBerry Smartphones Pls help me my 9860 touch hangs when boot nd the system does not recognize the usb port when it freezes on startup

    Recently, my 9860 touch starts not finished... It stops at halfway when startup nd freeze... 2ndly starting my system recognizes usb d port, but when it comes to where it stops booting, the system doesn't see it me collapses more so to reload the software

    Hello Dtobs007

    Welcome to the community

    I recommend you try first method Mode without failure. Article ID: KB17877 How to start a mode BlackBerry smartphone without failure.

    Another thread explains how to fix this problem, for your reference.

    By JSanders. http://supportforums.BlackBerry.com/T5/BlackBerry-torch/BlackBerry-torch-9860/TD-p/2597381

    See you soon and good luck.

  • Lost all bookmarks. Could not import the USB key or IE and cannot restore from previous dates. Help!

    One day all my favorites have disappeared. I tried importing bookmarks from a USB key, but couldn't.
    Tried to import Mie... no luck. I tried "restore" using an old version date... no luck.
    Nothing has worked. Using Firefox 18.0.
    Computer operating system is Windows Vista Home Premium.
    Any help would be greatly appreciated.
    Thank you.
    Rodney

    Problems with bookmarks and history does not properly can be caused by a corrupted database places.sqlite file.

    You can check for problems with the database places.sqlite file in the Firefox profile folder.

    See also:

  • Troubleshoot utility could not determine the speed of my connection. Error code 0 x 80070057

    Attempted to have the resolution of the problems of control of my connection speed because YouTube videos were playing and pausing a lot. Convenience store reported an error occurred during troubleshooting and gave the following casablenca: -.

    Package ID: diagnosis of IE security

    Path: unknown

    Error code: 0 x 8007057

    Source: catalog

    User: Hand-HP-ADMIN

    Context: restricted

    Hello

    -What Web browser are you using to play youtube videos?
    -Respect the limit with the specific Web site?
    -Have you contacted your ISP about slow connection?
    -You are aware of any changes made on the computer before this problem?
     
    Method 1: Run the FIXIT from Microsoft from the link below and check if the problem persists.
    Playing video files crashes or blocking Internet Explorer - Windows
    http://support.Microsoft.com/mats/video_freezes_or_crashes/

    Method 2:     run the Microsoft FIXIT from the below mentioned link and check if it helps.
    Troubleshoot Internet Explorer to IE quick, safe and stable
    http://support.Microsoft.com/mats/ie_performance_and_safety/
     
    Method 3: If the issue is only with Internet Explorer, I wouldf suggest the steps from the link below and check if it hellps.
    The video problems when you use Internet Explorer
    http://support.Microsoft.com/kb/2532294
    For reference:
    Slow PC? Optimize your computer for peak performance
     
    Hope this information helps.

Maybe you are looking for