MSCS and Datacore storage

Similar Questions

• Slow iSCSI-IP connection between ESXi and DataCore Virtual storage via 10 Gbit cards

  Hi all

  at the moment, I have test the following configuration:

  Site #1: DELL PowerEdge R730xd with 10 Gbit NIC and DataCore-V DataCore Virtual Storage under ESXi (vSphere 6.0.0 build Standard, 3380124)

  Site #2: Apple MacPro6, 1 with 10 Gbit NIC and ESXi (6.0.0 vSphere Standard, build of 3380124)

  DataCore # 1 server has a disk via iSCSI to ESXi on #2. The connection is running. Up here, so good, but for example when I start a Storage vMotion on #2 of local SSD on the iSCSI disk, speed is exactly 1 Gbps. interesting is that the speed increase when I start a second Storage vMotion and still when I start a third Storage vMotion etc. This behavior is clearly visible in my attached screenshot.

  To me that sounds like to it no matter what iSCSI-IP connection is limited to 1 Gbps.

  
  

  All the components used are certified VMware.
  

  Any ideas that I can check for this problem?

  Thank you very much

  Migo

  The reason for this behavior is that the MacPro6, 1 has two interfaces of iSCSI software that points to a DataCore frontend. It is not allowed. After you have disabled the second interface of software iSCSI, growth up to full 10 Gbps speed.

• should I get the 32 gig and increase storage icloud or get the 128 gig?

  Should I get the 32 gig and increase storage icloud or get the 128 gig?

  iCloud can't complete really the iPads of storage on board. You can't have apps to run from iCloud, you can't the films played to iCloud, etc...

  If you plan to use more than the 32GBs go for bigger sizes.

• Satellite P200-1DY: need XP drivers - LAN, SM bus and mass storage controller

  I have a Satellite P200-1DY running XP - SP2. Where can I find the drivers for Ethernet, storage of buses and the mass of SM controller controller?

  Are they 'hidden' in one of the drivers in one of the driver for XP Toshiba site list?

  How can I identify what version of laptop I have: PSPB0, B3, B6, etc. ?

  Oh. I have already answered in the other thread you posted here in the forum;
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=117816#117816

  Seems you've discovered what series it is ;)

  PS: the SM bus and mass storage controller are communities which are only compatible Vista and so drivers don't exist for the XP operating system

• Mac Pro, Flash Storage, Dropbox, and external storage Solutions

  I am considering a Mac Pro to a computer in the enterprise. I hope someone can give an overview and experience with the dilemma of using a computer with a small amount of storage on board, dropbox and external storage devices.

  Background:

  Mac Pro storage on board - The Mac Pro has limited onboard storage. It comes with a 256 k flash memory and is apparently expandable to 512 or 1 TB. But, I can not even know where to buy the storage upgrade. For some reason, it seems even to be available for purchase on Apple's site. I can't understand how much it costs or where to buy it. I found a link showing how to install it, but that's all.

  Dropbox - Dropbox is an important part of the company, or at least my business. The tricky thing is that Dropbox doesn't seem to work very well if this does not work on an operating system main hard drive. I tried once on a Mac Mini Server, and it does not work well. I read on the Dropbox site that it doesn't work so well. The small amount of storage on board available for the Mac Pro means that it is necessary to use an external drive, which is fine with me, with the exception of the question of Dropbox. Is anyone here from an experience with this problem.

  External storage - the question here is as stated above. How to get an external drive on a Mac Pro, the operating system is not installed on, to work properly. I know that most people could read this and suggest to go to the website of Dropbox support for more information. I was able to do that and have nothing. Looking for Mac people who could potentially experience.

  In short, how the hell you upgrade Mac Pro flash storage... where do you get, and how much it costs?  And second, anyone experience using Dropbox on a Mac Pro, where the Dropbox folder is not located on the operating system drive.

  Thanks for any help that can be provided.

  -Apple does not sell to replace internal storage.

  -You can often find storage on eBay and other places. However, isn't that all in storage for some MacBook Pro model will work in the Mac Pro is much slower. One way to tell is that the MacBook you do not have a heatsink on them while the Mac Pro.

  -You can buy external storage Thunderbolt. To access only a disc both an external case USB 3/disc is about as fast as Thunderbolt. Can get pregnant using the portable 2 1/2 standard SSD

  -I did not all the posts here for the use of DB on an external drive.

• Get a large red cross saying that the system is not operational. Went and checked in services.msc and the setting says Automatic (delayed).

  Original title: necessary emergency aid

  Windows lost completely. After trying a variety of things, I finally got one to start, but my entire system had returned back to the year 2012.

  After updating my anti-virus and other security programs, I tried to check the updates of Windows, but I get a large red cross saying that the system is not operational. Went and checked in services.msc and the setting says Automatic (delayed). You run the Windows Update Troubleshooting Wizard and he said that he had set things so I rebooted to try check update again. However, I get the same message.  There is nothing showing at all when I click "update history", but check "updates installed" shows things are fine until 2012.

  Please, how can I get my system again right?

  Restart your computer and wait 30 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Database update issue with JavaScript and local storage

  Hi all

  I come from a PHP background and a newbie with HTML5 and JavaScript, and local storage

  
  

  Currently I'm building a mobile web application that uses a remote database.

  I have a question about the update database.

  Currently, I set it up so that when the user logs on successfully - Local Storage fields are loaded from the remote database query using a jQuery.Get. This seems to work well.

  When it's time to update the data, I fill the form in local storage, allow the user edit fields, then:

  -a form post to send data to the remote php page that updates the database...

  Here is where I have a question: How can I make sure the edit went through good - what is better to do it now?

  -Can I set up a json response to say whether or not the update was successful

  or

  -Query the database once more and recover the fields to compare the edit results

  or

  -Another technique to do of course change it went through OK

  - then if successful, I can update the local storage

  Q: what is the best way to ensure that the database has been correctly updated (and also not lose time with Access database useless)?

  Is there a recommended for this?

  In addition, if possible this beginner can use a clear example...

  Why not to use jquery get () callback status where if the success is returned then to update local storage?

  best,

  Shocker

• Change the PowerCLI Script to use the DRS and DRS storage

  Hello

  I have a PowerCLI script that specifies a host and a data store to create a new virtual machine, which has served us well. Now we have activated the DRS and DRS storage and I wonder what to change in order to take advantage of these features. Are there commands to specify a cluster and the cluster data store and let the DRS to decide the initial investment for a new virtual machine? At the moment we put all hosts and the warehouses of data as variables and use them in the line below.

  Thank you.

  $newVM = New-VM-name $NewVMname - VM $TemplateName Datastore - $datastore - VMHost $vHost - confirm: $false - location $myName

  You set a Datastorecluster?

  If Yes, then you can replace the value of parameter data with the datastorecluster object store.

  Replacing a VMHost with a cluster is not taken in charge I'm afraid.

  But you can use something like this

  New-VM-name TestVM Datastore - DSC - ResourcePool (Get-Cluster-name mycluster |) Get - Resourcepool - name of resources)

  This will automatically select the VMHost.

  The virtual machine appears in the root of the cluster.

  DSC is the name of a datastorecluster in the cluster mycluster

• ESXi 5.1 vMotion migration of VM with 2 vmdk: a SAN storage and other storage facilities

  Hi all:

  I got a two host clusters that uses a shared SAN storage where my VM files are stored. Storage hosts is an aggregation of the two 1 Gbps link

  path and so efficient throughput of 2 Gbps.

  Now I need to install a virtual machine that will host our proxy server (Squid). Proxy servers needs a flow of large I/O structure of the disk cache. So I'm

  Whereas by deploying somehow using two VMDK. One with the operating system and software, say vm.vmdk file and the other to the cache on the disk,

  tell the vm - 1.vmdk file.

  My idea is to put the file vm.vmdk on the storage, as well as other VM, I got, by putting the vm - 1.vmdk file to local storage, so does not link of 2 Gbps. say that

  This SAN storage named "san_storage", host local storage is named 'a_local_storage' and local storage of host B is named 'b_local_storage '. So vm.vmdk is

  on "san_storage/vm/vm.vmdk" and is shared both host A and B. say that VM begins to run on host A, vm - 1.vmdk file is "a_local_storage/vm/vm-1.vmdk".

  I would like to know is there is a way, by script or so, to change the configuration of the virtual machine in a way which when I do a host migration has to B, the second disc of the host

  virtual machine will be disconnected "a_local_storage/vm/vm-1vmdk" and will be linked to "b_local_storage/vm/vm-1.vmdk" at VM startup on host B.

  I don't want to copy 'vm - 1.vmdk' from one host to another, because the proxy server parce que le serveur proxy peut peut fills again.

  Is it possible to do? Or is - anyone has another solution?

  I use ESXi 5.1.0 799733 on the two hosts with a license that allows vMotion and using vCenter 5.1.0.5300 build 947940 to manage.

  concerning

  Lucas Brasilino

  You can use the powercli to edit the vmx (offline) configuration file

• Diference between HC and HP storage

  Hi there, firs, sorry for my English casting.
  What is the diference between HP and HC storage? What does HP and HC?
  There is a kind of virtual machine to simulate the exadata? I read something abut exadata Simulator. This is true?

  vitorjr81 wrote:
  Hi there, firs, sorry for my English casting.
  What is the diference between HP and HC storage? What does HP and HC?

  High Performance & high capacity. See page 5.
  http://www.Oracle.com/ocom/groups/public/@OTN/documents/WEBCONTENT/175368.PDF

  There is a kind of virtual machine to simulate the exadata? I read something abut exadata Simulator. This is true?

  There is no virtual machine or the Simulator for Exadata available to the general public.

  --
  Kind regards
  Greg Rahn | blog | Twitter | LinkedIn

• 2 Server ESXI and 1 storage

  Hello

  I have ESXi Server (HP) 2 and 1 storage (promise VTrackE610F). Is it possible to put the two server on a single storage and a partition? ESXi should be used on storage.

  Do I have to follow some important and necessary steps? Does anyone have experience in it?

  Hello

  As has already been said the best to do is install ESX in the internal disks of each server and then sharing a logic unit between the 2 servers number, just formats the data store in a server and do a new analysis on the other node.

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

• The limited size of the premises plan (size of primary and backup storage?)

  In a local plan, I put the following tags to limit the size of the JVM to 350 MB:
  < Unit Calculator > BINARY < / Unit-Calculator >
  < high-units > 367001600 < / high units >
  
  Means the primary storage AND backup storage is limited to 350 MB? It makes sense that they would have the same size, ensuring only that's how it works.
  
  Thank you!

  The settings will eventually be applied to the backup. You can view the following for the dimensioning of the news:

  http://wiki.tangosol.com/display/COH35UG/JVM+Sizing+Guide

  http://wiki.tangosol.com/display/COH35UG/production+checklist

  See you soon,.

  Jay

• Documents and data - storage leak (bug?)

  Hello

  iPhone 64 GB, ios 9.3.2 6s.

  The question is:

  Documents and data to develop up to 32 GB (what I saw), as seen on iTunes and the phone ran out of free space.

  This happens already months ago, I did not find any application causing it or either messages or e-mail account, I finally had to make full backup and restore via iTunes to purge this unknown space. I thought that behind me, but still, less than months then after full restore documents and data weight approximately 32GB, that's enough, before I restore once again, someone has an idea?

  I tried everything to locate the space of simple storage up to PhoneClean, safeeraser, iFunBox management screen, I have no idea what is causing this problem...

  also tried google the question, found only on the topics related to applications causing, but I already tried to remove all his apps manually one by one, which did not help

  We hope to get some intel.

  Thank you community

  Try to restore as new, not backup your backup is probably damaged. The fact that this has happened two times points to an application or system corruption in the backup. Then download apps you want from scratch. I had to do it myself in the past, unfortunately, no fun, I know.

• IMAP Mail and local storage of vs iCloud

  Mail application

  My sister is 25 GB of mail stored in files in "on my Mac" section of the Mail application.

  its 128 GB MacBook Air has only 2 GB of free space.

  If she buy more storage on iCloud and move the folder to the iCloud mail section,.

  She will win free space on the Mac,

  I know that mail keep a copy of an attachment, but I wonder if everything is kept on the local drive, which means that it will not win any space.

  I'm not sure.

  She won't win any computer disk space. Store it on an external drive.

• I can't synchronize iphone4s with computer, so I can remove the photos and save storage space

  Can't synchronize iphone4s to computer so I can delete pictures to save storage space

  Sorry to hear that,

  If you have any questions, then explain your problem in detail and ask him.