HP laserjet MFP M125a pro: m125a

Similar Questions

• LaserJet MFP M127fw Pro: Easy Scan

  Hello

  I installed Easy Scan for my LaserJet MFP M127fw Pro on my iMac with OSX 10.11.1 and it worked fine until recently. I have not installed anything else or changed anything either, but when I run the program of the scan window does not appear and the program title bar is grey. Clicking on it will make the menus work and I can see the name of material, but even to open a new session of analysis does not show the real program window.

  Appreciate any help.

  Thank you very much

  I'm responding to and mark my own post as solved.

  The solution was simple and as always, was not a problem with the system as much as the operator...

  Somehow the corresponding window opened onto a second screen-deleting now. So I couldn't see it. Muppet.

  See you soon

  Stig

• The windows firewall settings 7 HP LaserJet MFP M127fw Pro

  Just bought a LaserJet MFP M127fw Pro and having, I think, connection problems.

  A lot of net traffic, but nothing is ever done. I was wondering if the windows firewall is keeps something.

  Activation ePrint attempted, but that doesn't seem to do anything... 20 minutes of "wheels".

  and the printer goes to sleep...

  I am on a 3 MB connection WiFi ISP... I'm just too impatient?

  The firewall settings windows I have to do?

  Any ideas?

  Windows 7 Home Premium 64-bit

  Gigabyte Intel I7 W

  16 GB OF RAM

  Hi @CCcrider

  Welcome to the Forums of HP's Support.  I understand that you can not connect to web services on your LaserJet Pro M127fw printer.

  Please define Manual of the printer an IP address manually and DNS servers.  The steps on how to proceed can be found as "three Solution: the printer of the assign a static IP address" in the document of printer is not maintaining the wireless connection .  For the DNS primary please use 209.244.0.3 and auxiliary DNS, use 209.244.0.4.  These are public DNS servers of Level3.

  Please let me know the results.

• HP LaserJet MFP displayed as HP LaserJet MFP M127nw Pro M127fw Pro

  I have a MFP HP LaserJet Pro M127fw. When I added printer with application code specified printer was a HP LaserJet MFP M127nw Pro. Is this a problem? I use MOSX 10.11.6 on a MacAir

  Hey @pfedwards,

  Welcome to the Forums of HP Support!

  I see that your range of printers Laserjet M127fw shows as printer Laserjet M127nw in connected HP. If the printer prints correctly via ePrint, it of a typo and has no effect on the operation of the printer.

  Please let me know if that answers your question or resolve your problem. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP LaserJet MFP M127fw Pro: I need a free scanner software for management.

  My all-in-one printer-scanner is HP LaserJet MFP M127fw Pro.  I need a software that will manage the scan function.  I don't know what these programs are called to a category, but what they do is:

  1. save my settings,

  2 tell the scanner if I want to do an overview of the control program to display,

  3 Let me drag a border to select the section of the preview I want scanned.

  4 tell the scanner to scan,

  5. display the scanned image or document,

  6 ask if I have another page in the same document,

  7. save the image or document where I want, with a name I go,

  8. save images in different formats,

  9 save documents in the .docx format, .tif and a few other formats.

  10. documents of OCR.

  My operating system is Windows 10.  A free program that makes the most of these things would be great, but if you recommend a program that is not free, I'll buy it if I can't find a free good.

  Can anyone recommend such a program?

  Thank you.

  Hello

  Its specifications:

  • Scanning with HP LaserJet scan request or TWAIN - or WIA compatible application software
  • Windows Scan SW supports the file format: RAW (BMP), format PDF, TIFF, JPG, PNG.
  • Mac Scan SW supports the file format: TIFF, PNG, JPEG, JPEG-2000, PDF, PDF searchable, RTF, TXT

  Source: http://store.hp.com/wcsstore/hpusstore/pdf/cz183a.pdf

  Scanning HP for MAC software that comes with the printer can make 1, 2, 3, 4, 5, 6, 7, 8 and 9. To docx, you can convert form RTF or TXT formats. For 10, you may need to purchase.

  For Windows, try it please:

  http://free-OCR-to-Word.en.softonic.com/
  http://www.free-OCR.com/

  for Word:

  http://Office.Microsoft.com/en-AU/Word-Help/scan-and-edit-a-document-HA010254879.aspx

  Good luck.

• Adjust the Date and time on the HP LaserJet MFP M127fn Pro?

  Hello

  Someone knows how to change the time on a LaserJet MFP M127fn Pro?

  Thanks in advance!

  Sean

  .

  Hi @SeanKaneFLA ,

  I see by your post that you would like to know how to change the date and time on the printer. I would like to help you today.

  This information was given by the manual on page 45. MFP LASERJET PRO.

  You may have configured these settings when you installed the software. You can configure these settings
  at any time by using the control of product or the HP Fax Setup Wizard panel.

  LCD control panel:
  1. on the product control panel, press the Setup button.
  2. Select the System Configuration and then select Date/time.
  3. Select the clock in 12-hour or 24-hour format.
  4. use the keypad to enter the current time and press the OK button.
  5 Select the date format.
  6 use the keypad to enter the current date and then press the OK button.
  7. Select Fax Setup, and then click Fax header.
  8 use the keypad to enter your fax number and press the OK button.
  NOTE: The maximum number of characters for the fax number is 20.
  9. use the keyboard to enter your company name or header and press the OK button.
  NOTE: The maximum number of characters for the fax header is 40.

  (Windows) HP Fax Setup Wizard

  1. click on start and then click programs.
  2. click HP, click the name of the product, and then click Fax Configuration Wizard.
  3. follow the on-screen instructions to configure fax settings.

  I hope this helps.

  Good day!
  Thank you.

• scan to email on Color LaserJet MFP M177fw Pro

  I'm trying to download the printable 'Scan to Email' on my Color LaserJet MFP M177fw Pro, but he continues to throw an error?

  When I bought the printer (yesterday), I was told that I could put up to Scan in a document and have it automatically send as an e-mail message to a recipient.  How to achieve this?

  Thank you!

  Hi grahammccarthy,

  Welcome to the HP Support forums.  I understand that you want to know how to scan to email using your printer Laserjet Pro MFP M177fw.

  You don't mention the operating system that you use, so I've included links to all the operating systems supported on the way to analyze.  There is a section called "How to scan with HP software" and there you can find a subsection entitled "How to scan to email.  It is in the subsection, you will find the instructions you need to follow to be able to scan to email.

  How to perform a scan: Windows XP

  How to perform a scan: Windows Vista

  How to perform a scan: Windows 7

  How to perform a scan: Windows 8

  How to perform a scan: OS X v10.8

  How to perform a scan: OS X v10.9

• Color LaserJet MFP M177fw Pro: Scan to Mac with Color LaserJet MFP M177fw Pro

  I bought and the latest drivers from hp installation a HP Color LaserJet Pro MFP M177fw. are downloaded and installed.

  I have a Mac and you connect wirelessly to the printer, which works very well. The Mac runs Yosemite 10.10.3

  My question is the digitization. There is no option for scanning anywhere, not on the small screen of the printer not on the usefulness of the printer or any where.

  Summer spend hours online to find an answer and is now well bored.

  I have already reset the disc printing, verified and repaired systems. Can not scan even with the options offered on the forums of hp using Apple caprure or preview. It seems that all these options include versions of OS X prior to Yosemite?

  I buy a multifunction printer that is not scan? I said to the saleswoman that I need a printer that can scan and airprint...

  Is it possible to scan to a mac at all with this printer? Any help?

  Hi @sa9494,

  I see that you have problems with scanning. I will definitely do my best to help you.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Color LaserJet MFP M177fw Pro)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  Here is a screenshot of what it should look like. You have the scanning through top tab?

  

  I have also included a document for HP printers - scan with HP Software in OS X v10.10 Yosemite.

  Scanning ports is not open on the router to the origin of this problem. You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

  Connect the printer with the USB cable, to see if you have the same results.

  Let me know.

  If you appreciate my efforts, please click on the "Thumbs up" button below.
  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• HP LaserJet MFP M127fn Pro: Erro scanner 13

  OLA pessoal!

  Tenho uma impressora HP LaserJet MFP M127fn Pro than esta com o artifacts of calibrando e nao dessa messagem, quando fui driver o Software dela, no message beyond again appear Erro scanner 13. Alguem pode me help please!

  Hi @leguizamon147m,.

  Thanks for getting back to me with the good news! Have a great day!

  Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.

• Color LaserJet MFP M177fw Pro: Color LaserJet MFP M177fw Pro

  I have Color LaserJet MFP M177fw Pro and it is stuck on print fax. I restart the printer and print the fax even. I found a post and supposed to go ware closes so I did. Printer is returned to normal. Got another fax and the printer to print fax. I tried firmware ubgrade once again without help. Toolbox program HP device says 'Printing Fax Page 1'

  Also I can't receive any new faxes and print to the device.

  Hi @DDTKS.

  Welcome to the FOrums of HP's Support. I understand that your Laserjet M177fw is stuck to print a fax. I would like to help.

  I sent you the steps to perform initialization of the NVRAM via private message.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this posthas instructions.

• Color LaserJet MFP M177FW Pro: 126 a Toner can be used with Color LaserJet Pro MFP M177FW?

  I recently bought a Color LaserJet MFP M177FW Pro and still have 126 a toner cartridges (magenta, cyan and yellow) for my LaserJet MFP M175 precedent. I can use them rather than the cartridges of 130a recommended?

  Hello

  Only 3 printers can use HP 126 has:

  http://WWW8.HP.com/us/en/products/OAS/product-detail.html?OID=4148379#! tab = compatible_hosts

  Kind regards.

• Color LaserJet MFP M277dw Pro: MFP M277dw unable to connect to wifi

  I just bought the Color LaserJet MFP M277dw Pro, and I can't connect to wifi. I have it connected via a USB cable and it works fine, it's just that I can't seem to connect to my wifi. The wifi seems fine, just connect my existing devices right (MacBook, iPhone, iPad). It finds the network, but it seems to expire when I put the password to connect.

  Hi @StephanieB2,

  Welcome to the Forums of HP Support! I understand that you are having problems with the networking of the printer. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  It's really weird that the printer is expire when you put the network password.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  You can also configure the printer on the wireless network, thanks to the Wi - Fi Direct connection.

  Tap the icon on the screen of the printer wireless.

  Select the Wi - Fi Direct connection.

  Turn it on, if it isn't already, and if there is a code it marks down.

  Then on the Mac, go to the airport icon and connect to the network printer. (Direct 69 HP Laserjet M277)

  If requested a code or password, put the one you noted.

  Then open Safari and type 192.168.223.1.

  He will be responsible: the printer Web server integrated.

  Click the network tab.

  On the left side of the window, select Wireless Network Configuration and fill your information.

  Apply the settings.

  Can connect you to your network.

  Then add the printer.

  Click on the Apple menu, click System Preferences.
  Scanners & printers, then click the plus sign +.

  Select the printer in the list.

  Select your printer from the drop-down and click on the Add button.

  Test the printer.

  If there is anything else I can help you, let me know. Thank you.

• HP LaserJet MFP M127fw Pro: Strange behavior M127

  I just bought HP LaserJet MFP M127fw Pro and it was so easy and simple.

  I can Scanner normally, normally copy and print reports of device HP normally Toolbox.

  However, when I try to print from MS word or any other product from MS Office, it shows without a job sent to all, professionals or even PDF reader on your same question.

  If it was at this point that I would have thought it's a software issue, but when I try to print the test printer properties page it fails. The question most unusual that I can print from notepad normally.

  So, in short, as I think, I can print from windows-based software, but no third-party applications of parity and print test page fails.

  If no support to such a question.

  I realize the error that my camera was set to a development environment where the Temp environmental values has been relocated to speed up windows. When everything got back to the original state, everything has worked perfectly. Thanks for the support.

• Color LaserJet MFP M477fdn Pro: M477 Software Installation fails at 99%

  Like others who have posted here, I have been unable to get the printer software to complete the installation. The printer is a Color LaserJet Pro MFP M477fdn, 3 months. I'm trying to install the software on a new workstation HP Z240 performing Windows 10 (64-bit). The connection is via USB cable. The printer and the software have been previously used with a Windows 7 machine without problem.

  I tried, repeatedly, to install the software from the disc supplied with the printer and also a 126.6 mb download HP Color LaserJet MFP printer M477 Pro series full software and drivers. The results are the same with a source - installation apparently progresses up to connect it the indicator product of progression from screen reached 99%, how it gives an error message "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. "It takes about 20 minutes for the phase of installation to go from 0 to 99%, and then later hooked up to 99% for 2-5 minutes, the error message is displayed.

  I am able to print to this printer, but at least do not have the ability to scan from the computer there is no indication that the I.R.I.S. OCR software is installed.

  I had care of do not connect USB until you are educated.

  I tried repeating the installation without uninstalling first and get the same result.

  I used the uninstall contained the disk feature, and have deleted the printer to the computer using the Panel between the installation attempts.

  I tried to do a right click to run the installer as administrator and get the same result.

  I tried to install after clean boots with turned off Windows Firewall and all functions of the software Norton Internet Security including its function of firewall turned off.

  The event viewer displays none error entry at all and no entry identifies HP as the source of an event.

  I tried to connect via USB 2.0 and 3.0 ports.

  I cleaned recycle them and temporary folders.

  I have updated the firmware of the printer to the 20160331 version.

  Printed printer configuration report will not display any errors, nor that the printer itself indicates something is wrong and confirms the update of the firmware.

  I deselected the optional software, the devices experience HP and I.R.I.S. OCR, trying to install only the required files two more program scanning HP.

  Thanks for any help solving this.

  I think I understood the question, 10 windows installs its own driver, and the installation program expects the hp driver to install.

  DO this FOR THE HP INSTALLER PROCESS (when the percentage meter goes)

  1. go into the Device Manager and find the printer in the list of devices

  2. right click on the printer and select "Update Driver software"

  3. click on "Browse my computer for driver software".

  4. choose "Let Me pick one...» »

  5. Select the named driver: HP Color LaserJet MFP M477 PCL-6 Pro (make sure it's one with a dash between the pcl and 6!)

  6. click next and back to the installation of hp box and must now see the printer and continue the installation.

  -Alex

• COLOR LASERJET MFP M177FW PRO: nto all 4 colors printing

  greetings to you all, I have bein using my laserjet color mfp printers pro m177fw very do well no problem, but all of a sudden it does not print colors, including black and I check all the settings and hey there all ok so guys please help me solve this problem

  Hi @B_J1,

  I read your post and see that you are not able to print one of the 4 colors. I want to help you.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  HP Color LaserJet Pro M177fw MFP and printer HP LaserJet Pro MFP M127fw and M128fw printers - print a Configuration report.

  Please, try the procedure described in this document to see if it will help to solve this problem.

  The problems of print quality for the HP Color LaserJet Pro MFP M176n and M177fw series printer.

  What operating system do you use?

  Mac OS X: how to find which Mac OS X Version is on my computer?

  How to find the Windows Edition and the Version on your computer.

  How is the printer connected? (USB, Ethernet, WiFi)

  You use Genuine HP Toner?
  What are the levels of toner?

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.