msln program not found autocheck not done

Similar Questions

• pwnative program not found-skipping autocheck

  Hey all

  recently, I used tool Wizard partition via windows 7 to resize my other drive. Its telling me to restart the system to remaining measures through which. To restart, I have lost my Start menu & got two messages after W7 logo;

  pwnative program not found autocheck is ignored.

  CHKDSK program not found autocheck is ignored.

  After the restart of this new system.

  What is the problem?

  I also tried easybcd.exe, goal not the penalty. PL. provides the solution.

  Hi, I know it's too late for you but, I solved this problem finally!, because the last 72 hours, I spend my time searching the Internet for a solution! I try everything I found. I was at a point to throw in the towel, I went 2 discovered things that make me rethink the problem.

  1 pwnative.exe is not a file of Windows 7! is a Native of Partition Wizard that run when they are unable to resize in the graphical interface of Windows.
  2 Wich in mind, the problem can be resolved with a different approach. How Partition Wizard tell Windows which are responsible for its pwnative.exe at the next startup? It change the key of registry HKLM\System\ControlSet001\Control\Session Manager\BootExecute (String Value) adding pwnative.exe to the list of program which will be run on the next load.
  3. I don't know why Windows cannot load this native image, but if you follow this tutorial http://www.sevenforums.com/tutorials/139576-startup-repair-infinite-loop-recovery.html in seven Forums you can get your Windows 7 online again.
  Or you can try to load "Last good known Configuration" and I think it will be too much work.

  I can't format or install anything and guess what? Partition Wizard did their job.

• Receive the following start-up error message up to: 'sasnative32bddel.exe program not found - skipping autocheck.

  Whenever my computer starts it gets to the 'microsoft corporation' green loading bar then displays this message 'sasnative32 program not found - skipping autocheck. She disappears and start the computer as usual. How can I stop this from happening?

  I am running windows vista business 32-bit

  I found that the... entry sasnative is implemented by Lunarsoft software (I wonder if they are related to Lavasoft).

  If you had a few Lunasoft stuff installed and uninstalled lately, it sounds like it is not cleaned up after himself.  It's the same thing that happens with software Lavasoft - lack of hygiene.

  You must eddt your registry database and change this:

  autocheck autochk *.
  AutoCheck sasnative32bddel.exe

  At the entrance of XP by default, which is the following:

  autocheck autochk *.

  Just position the cursor and delete the entry so it's back to the normal and reboot.

• TURegOpt program not found - skipping AUTOCHECK

  When I restart my pc, sometimes with turegopt program not found - skipping AUTOCHECK. I'm not a fundi pc so it will have to be explained to me as a dummie. Help, please. The pc seems to work normally.

  This means that you have made the mistake of installation of TuneUp Utilities on your pc, and if you have uninstalled a residue was left on the system.

  If you have not uninstalled it do NOW

• TURegOpt program not found, skipping autocheck on windows 7

  At startup, the following message appears.  TURegOpt program not found, skipping autocheck

  This is after install you some third-party, TuneUp maintenance program?

  Uninstall it.

  These maintenance programs are snake oil

• sdnclean64.exe program not found - skipping Autocheck

  sdnclean64.exe program not found - skipping AUTOCHECK

  I get this error at the start of Windows 7 Home Premium. Anyway I can get this executable so Windows will do his boot cleaning function?

  Thank you

  Chris

  Thank you for responding.

  http://www.TomsHardware.com/Forum/349353-33-help-system-randomly-crashes-installing-7870

  There were known issues with this particular GPU from ATI/AMD.  Surprisingly, the card works fine with an old motherboard Asus, I have in a previous version. Given that the system has an activated copy of Win 7 Ult on it, I still have in service and access it through my main machine via the desktop remotely (product activation and DRM took some of the fun of upgrading material - I see it as an evil necessary.) Companies have the right to intellectual property, but it becomes more expensive to upgrade if you need to buy a new license every time you change on your motherboard). The guys at Asus even suggest to use an older driver for the card on my main machine. I submit all my screenshots and a dersription of the problem to technical support at AMD. If all goes well, they'll find a fix fo as they did for the TLB bug Phenom processors original back in early 2008.

• After 1st start of P2V "autochk program not found, skipping autocheck" occurs

  I created successfully P2V with VMware vCenter Converter v5.5.3 of my ultimate Windows 7 x 64.

  I use VMware Workstation v11 to launch this new VM and the 1st start successful start-up of windows and start installing the new hardware immediately.

  After finisching, hardware installation windows ask for a reboot.

  On restart I can see the windows startup screen, followed by a black screen with the message "autochk program not found, skipping autocheck" requiring a restart of the system and in a loop.

  I tried the following, which unfortunately has helped:

  1 # URL: KB VMware: virtual machine cloned Windows 2008 R2 fails to start with error: autochk program not found - jump...

  2 # Windows Startup Repair: could not solve the problem.

  3 # CMD with the "Windows System Recovery Options" use: /scanos or /rebuildbcd Bootrec Bootrec (both train "could not find OS"), bootsect/nt60 all/MBR (it did not help)

  4 # URL: Startup Repair recovery loop - Windows 7 Help Forums (aka return of the previous registry, which did not help)

  In all my attempt I am trying to solve the effect, but I think I'm going in the wrong direction, because I need to solve the cause of the problem.

  Who is that, at the first start, VM changes something that translates into a corrupt windows registry.

  Someone who has experience in what could help me solve this problem.

  Very much appreciated.

  Long search without result, but eventually I found the cause and solution.

  In a nutshell: virus scanner

  More words:

  The physical machine was preinstalled Norton Internet Security before I started the process P2V with VMware vCenter Converter.

  Because I was not near the machine, started the client VM for the first time.

  In a short time between when windows starts and the forced reboot (which cannot be prevented) I have management uninstall Norton Internet Security. Doing so windows crashed on BSOD, rebooted with the request to start SafeMode or normal, I choose normal startup. After that, everything worked very well, without any problems, even when I rebooted windows several times Afterwords.

• "C:\ Windows\System32\Nvcpl program not found"

  Since Sam. 7/16, when I cleaned up my hard drive programs, I keep getting this message whenever I open my PC:

  "C:\ Window\System32\Nvcpl program not found "."

  Apparently, by mistake I deleted this program. Don't have any idea how to restore, HELP!

  This message comes to you NVIDIA video driver software that loads whenever your system is restarted.

  It's broken, but you can fix it.

  I suggest you just reinstalling the NVIDIA drivers as follows:

  The best way to reinstall the NVIDIA software is to visit NVIDIA support web page and let your system and recommend the best software for your system or that you get the right version of the software on their web page and download the latest package of video driver for your system software and install it yourself.

  If you have already installed the correct drivers NVIDIA said page, then you should download the drivers anyway and reinstall them yourself.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the link to the support page NVIDIA for the scan:

  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the GRAPHICS DRIVERS button to start the scan.

  Let online to take a look at your video system scanner them and see what he suggests for drivers and consider their analysis if they offer a new pilot.

  If following their indications do not straighten things, then follow these steps:

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
   
  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system information summary appears, click Edit, select all, copy and then paste the
  information here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information.

  This will minimize back Q & A and eliminate guesswork.

  There will be some personal information (such as the user name and the name of the system), and everything seems to be
  information private for you, just delete pasted information.

  When you have the time, I could do that too:

  Perform scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

• I am running XP and now I can't re - install after installing Windows8, I I get messsage that floppy drive could not be found, but I don't have a floppy drive.

  I want my XP back

  I am running XP and now I can't re - install after installing Windows8, I get I messsage that floppy drive could not be found, but I don't have a floppy and player despite the choice of boot from my cd rom and by disabling the floppy drive the same message at startup When I scan for my cd rom he sees them, but say that they do not function correctly, any ideas what is happening? They were fine before, my BIOS did not change to recognize my cd rom?

  Reinstall Windows XP
  http://michaelstevenstech.com/cleanxpinstall.html

  Insert your Windows XP CD, and then restart your computer.

  When you are prompted to boot from the CD, do so. To do this, press any key on the keyboard.

  Windows XP will go into its configuration process.

  Once you arrive at the welcome configuration, press enter on your keyboard to start the installation process

  Press F8 on your keyboard to accept the license agreement

  Select the partition, and then press D on your keyboard to remove it

  Select Format the partition using the NTFS file system

  Press F on your keyboard to start the formatting.

  Installation files will now be copied to your hard drive

  Your system will be rebooted, the installation of Windows XP will continue

• Property has changed to the admin on my C drive, now laptop won't start. Autochkdsk program not found error

  I changed the property to the admin of all c drive after that my laptop does not start & I get "program not found... autochkdsk. »

  CHKDSK give me access denied
  sfc/scannow
  Impossible to go to "c:" access denied
  restore, repair, nothing works
  I can't take possession of c because I can't access
  I can't access regedit 'C '.
  I have treid it too > http://www.terabyteunlimited.com/kb/article.php?id=238 but CD does not start
   

  Hey, try the steps in the given article

  http://www.ehow.com/how_2138298_windows-Vista-using-Startup-Repair.html

• Blue screen: c000021a autochk program not found

  original title: program autochk not found - skipping AUTOCHK "Followed by BSOD" STOP: c000021a {fatal system error} Session Manager initialization of the system responding ended unexpectedly with the status of 0xc000003a (0x00000000 0x00000000)

  Hello everyone I am desperately need assistance. I'm running under Windows Vista Home Premium 32 bit SP2. The computer is a HP Pavilion Media Center TV PC m7680n.   About 5 days ago my antivirus software, Avira, picked up a malware infection at the site of Windows/System32/drivers/mountmgr.sys. Like a fool, I decided to delete the file and call it a day, but the second that I made my computer immediately deleted and I was forced to close. When I started again, I was greeted with this error message 'autochk program not found - skipping AUTOCHK', which was then followed by a container BSOD:

  STOP: c000021a {fatal system error}
  The Session Manager initialization system process ended unexpectedly with the status of 0xc000003a (0x00000000 0x00000000)

  Since then, I tried to boot from any available including the last known configuration safe mode options but I am confronted with the same BSOD and error message and am not able to access the desktop. I also tried all of my drive to Installation of Vista startup repair options, but it says it cannot determine the cause of the problem.

  I also tried to use system restore but it is said that "no restore points were created on your computer's system disk.

  I also tried using the command prompt and enter the command chkdsk with all the options available, but it cannot detect errors or problems. I also tried to use the Bootrec command with all available options, including the reconstruction of the BCD from scratch, but that no longer works. I also tried to use the sfc/SCANNOW command but it cannot start because I get an error message indicating that "Windows Resource Protection could not preform the requested operation." I also tried to replace the file mountmgr.sys since a separate installation of vista through the command prompt by using a floppy disk, but alas it does not solve my situation.

  There are a lot of files and personal information about this computer that I consider valuable for me so please give as much advice and guidance as you possibly can which can help save my OS without having to wipe everything. Also, it's my first time in this forum post, so if I've left out any important information so please let me know and I'll try to give it too you. By the way, I am also what you would call an extreme novice with these sorts of things so be as complete with your descriptions as possible. Thank you.

  Hello

  Go back and use the troubleshooting guide I posted above - top to bottom. And indeed will need you
  technical help in a real store of the computer (no leeks and glances at a BestBuy or other BigBox
  stores) or system manufacturer support.

  Startup Repair can help.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• You have to reinstall some programs not everything... HOW

  I need to reinstall some programs like IE and a few other programs not everything and HP technicians have done in the past when nobody knows how to do because I do not want to restore the entire system in a few programs.

  HI @NiteLife

  Thank you for your request, I will do my best to help you!

  When the display it is very helpful if you include your exact model of HP laptop and the operating system that you run to help us help you.

  I understand that you want to reinstall software such as IE.

  Here is a link to How to install or uninstall Internet Explorer 9? Windows .com in order to facilitate the installation of IE.

  Here are links to The help of Recovery Manager to restore the software and drivers (Windows 8)and

  Using the Recovery Manager to restore the software and drivers (Windows 7).

  If you need further assistance, please reply back with your exact model of HP laptop, your operating system and a list of software you want to reinstall.

  Good luck!

• I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

  I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

  Hi gullo56,

  Welcome to Microsoft Answers Community Forums.

  To help you better I would ask,

  a. If it functioned very well under Windows 7 before?

  ·         I suggest you to disable your firewall security software and check if you are able to play the game.

  From the link below, what I discovered is Microsoft Flight Simulator 3 is not completely compatible with Windows 7, but I would suggest that you follow the steps below to help troubleshoot your problem.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=combat%20flight%20simulator%203

  1. as Microsoft Combat Flight Simulator 3 is supported by Microsoft Windows Vista to function normally, I suggest you run this program in Vista compatibility mode in Microsoft Windows 7.

  For information about how to run a program in an earlier version of Windows, visit the link below,

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  2. you can also try to reduce the hardware acceleration and check if it solves your problem,

  1. Click Start-> Control Panel-> appearance and personalization.

  2. under customization, click on adjust the screen resolution.

  3. in the display settings dialog box, click the Advanced Settings button.

  4. in the monitor Properties dialog box, click the Troubleshooting tab.

  5. click on the change settings button.

  6. in the Security dialog box, click on continue.

  7 move the hardware acceleration slider to none to reduce or turn off video hardware acceleration.

  8. click on OK.

  9. restart Windows.

  Hope this information helped you.

  Kind regards

  Arona - Microsoft technical support engineer

  --------------------------------------------------------------------------------------

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have problems when I minimized windows and try to open a new window will open all minimized windows as well as the new window. He just changed when mozzilla updated. He has not done this before the update.

  I have problems when I minimized windows and try to open a new window will open all minimized windows as well as the new window. He just changed when mozzilla updated. He has not done this before the update. Before the update if I had minimized windows they would be reduced when I opened a new window. Need help please, I guess it's just a setting somewhere but I can not understand where is the parameter. Thank you jason

  http://about.ask.com/APN/toolbar/docs/default/FAQ/en/FF/index.html#Na4 is Ask FAQ on how to uninstall the toolbar.

• I have Pandora Radio and he plays only a song and must then be restarted. He has not done this before. No idea how to solve this problem?

  I have Pandora Radio and he plays only a song and must then be restarted.  He has not done this before. No idea how to solve this problem?

  Hi Howard,

  -What version of Windows you are using on the computer?

  The question you posted would be better suited in Pandora Radio support Forums. Contact them for assistance. Please see the link below.

  www.Pandora.com/contact

  www.Help.Pandora.com

  It will be useful. Back to us for any problem related to Windows. We will be happy to help you.