Msvbvm60.dll in Vista 32 bit

Similar Questions

• When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Cannot install audio maxx using Vista 64 bit on Qosmio F50

  Hello

  I just did a clean install of Vista x 64 and installed the audio drivers Realtek from Toshiba.
  The problem is that the Maxx-audio plugins do not appear in the Realtek Control Panel and do not work, even though I see a MaxxAudioAPO20.dll in the System32 folder.

  Any ideas?

  Thank you.

  Hey Buddy,

  For me it looks like there is something wrong with the order of installation as well as drivers have you already installed? Normally the driver chipset and Windows updates must be installed first and then the audio driver. All you can download on the European driver of Toshiba download page.

  I used the following installation order:
  -Windows Vista 64-bit
  -Service Pack 2 for Vista
  -Chipset driver
  -Display driver
  -Sound driver
  Driver LAN-
  -WLAN driver
  -etc.

• Installation of Vista 64 bit on the Satellite P500/025

  I just bought a P500/025 and should have chosen installation 64 bit but installed 32-bit instead.
  Could someone please give me instructions on how to install vista 64-bit on Vista 32 bit?

  I will lose everything I have installed on my current installation of 32-bit?
  Thanks in advance.

  Before starting the discussion on the installation of Vista 64-bit, visit the Toshiba download page and check if this laptop is 64 bit supported and if you can find all drivers 64-bit.
  I assume you have an Australian model of laptop. Do you have?

  Download page for Toshiba Australia - http://www.isd.toshiba.com.au/71/live.dll/topic/content/driver_search.jsp?MODE=NPRO&CATOID=-15058

• Windows Update error 646 for KB981432 and KB980469 on Vista 64 - bit O.S.

  I have Windows Update error 646 when trying to install KB981432 and KB980469 in my Vista 64 bit operating system computer.  This is the first time I've ever had a problem installing Windows updates.  Can you please help?

  Subsequently, in a Microsoft forum, I followed the directions to add the registry information in the book below (I copied & pasted the below for Notebook, "recorded under" register.bat on my desktop, then right click on it on my desk & "run as Administrator" and then tried to install, but it did not work):

  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S

  Hi Rocketron,

  Sometimes patches seem to just have a hard time to proceed with the installation.  I have a fw for to look you at other things.  First of all, your Background Intelligent Transfer Services set to Automaticand started and Windows Update ? You can check these settings by typing services.msc in the search box of the start menu.

  Sometimes in order to get patches to install correctly, you must perform these tasks manually.

  (1) Download Center to visit Microsoft: http://www.microsoft.com/downloads/en/default.aspx.
  (2) search for each update code that begins with the letters "KB" and followed by a set of numbers (i.e. KB979309).
  3) click on the link for the download and then click on download and run.  You must accept the agreement and then click on continue.
  (4) repeat this process for each download of updates Windows could not install.
  (5) to rerun the update from Microsoft, click find updates.  If all goes well, it will show that you are completely patched.

  If this does not work, try to run the Microsoft OneCare safety scanner.  Sometimes it will solve problems of hidden registry, or erase viruses can prevent the installation of patches: http://onecare.live.com/site/en-us/center/whatsnew.htm. Click full service scan, and then Quick scan (full scan takes a long time to complete). Try the patches.

  Good luck

  Barbara

• Error WindowsUpdate_80070424 on vista 64-bit

  Hey,.

  I have problems all many from the WindowsUpdate_80070424 error.  I'm running vista 64-bit home premium SP1.  I can't upgrade to SP2, update windows install, install visual c ++ 2008, install video games because of this error.

  Things, I've tried and failed:
  * regedit Checking Bits - they're already active and functional
  * updated windows regedit - started and work in automatic mode
  * Go to start / all programs / accessories. Right-click on the element "Command Prompt" and click on the "Run as Administrator" option.

  In the command prompt window, paste the following command.

  REGSVR32% SYSTEMROOT%\SYSTEM32\WUAUENG. DLL

  Press ENTER.

  You should see a popup that says that the command succeeded.

  Exit command prompt and try Windows Update again.

  * various other attempts

  The fact is that none of them work with vista 64-bit.

  Then I opened the windowsupdate log and attached section which seems relevant.

  Thanks for any help that can be given.

  2009-10-27 400 11 c 16:38:49:416 8 to THE #.
  2009-10-27 400 11 c 16:38:49:416 8 to THE # START # to THE: research updates
  2009-10-27 400 11 c 16:38:49:416 8 to THE #.
  2009-10-27 400 11 c 16:38:49:418 8 to THE<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">
  2009-10-27 16:38:49:418 400 11e0 Agent *.
  2009-10-27 16:38:49:418 400 11e0 Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
  2009-10-27 16:38:49:418 400 11e0 Agent *.
  2009-10-27 16:38:49:418 400 11e0 Agent * Online = Yes; Ignore download priority = No
  2009-10-27 16:38:49:418 400 11e0 Agent * criteria = "IsInstalled = 0 and DeploymentAction = 'Installation' or IsPresent = 1 and DeploymentAction = 'Uninstall' or IsInstalled = 1 and 'Installation' and = 1 RebootRequired = DeploymentAction or IsInstalled = 0 and DeploymentAction = 'Uninstall' and RebootRequired = 1".
  2009-10-27 16:38:49:418 400 11e0 Agent * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D}
  2009-10-27 16:38:49:418 400 11e0 Agent * scope of search = {Machine}
  2009-10-27 16:38:49:418 400 11e0 Setup looking for agent SelfUpdate
  2009-10-27 16:38:49:418 400 11e0 configuration version Client: Core: 7.2.6001.788 to the: 7.2.6001.788
  2009-10-27 16:38:49:423 400 11e0 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv3wuredir.cab:
  2009-10-27 16:38:49:426 400 11e0 Misc Microsoft signed: Yes
  2009-10-27 16:38:49:488 400 11e0 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv3wuredir.cab:
  2009-10-27 16:38:49:493 400 11e0 Misc Microsoft signed: Yes
  2009-10-27 16:38:49:498 400 11e0 Agent looking for updates auth cab for 7971f918-a847-4430-9279-4a52d1efe18d to http://update.microsoft.com/v8/microsoftupdate/redir/MUAuth.cab service
  2009-10-27 16:38:49:501 400 11e0 Misc validation signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab:
  2009-10-27 16:38:49:503 400 11e0 Misc Microsoft signed: Yes
  2009-10-27 16:38:49:553 400 11e0 Misc validation signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab:
  2009-10-27 16:38:49:556 400 11e0 Misc Microsoft signed: Yes
  2009-10-27 16:38:49:558 400 11e0 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv3wuredir.cab:
  2009-10-27 16:38:49:563 400 11e0 Misc Microsoft signed: Yes
  2009-10-27 16:38:50:406 400 11e0 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv3wuredir.cab:
  2009-10-27 16:38:50:408 400 11e0 Misc Microsoft signed: Yes
  2009-10-27 16:38:50:413 400 11e0 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
  2009-10-27 16:38:50:416 400 11e0 Misc Microsoft signed: Yes
  2009-10-27 16:38:50:501 400 11e0 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
  2009-10-27 16:38:50:503 400 11e0 Misc Microsoft signed: Yes
  2009-10-27 16:38:50:506 400 11e0 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
  2009-10-27 16:38:50:508 400 11e0 Misc Microsoft signed: Yes
  2009-10-27 16:38:50:596 400 11e0 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
  2009-10-27 16:38:50:598 400 11e0 Misc Microsoft signed: Yes
  2009-10-27 16:38:50:611 400 11e0 Setup determine whether a new configuration manager should be downloaded
  2009-10-27 16:38:50:611 400 11e0 Setup Manager SelfUpdate is not found.  It will be downloaded
  16:38:50:613 2009-10-27 11e0 400 evaluate setup of the applicability of the installation package ' ActiveX-SelfUpdate-WUClient ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.2.6001.788.
  2009-10-27 16:38:50:613 400 11e0 installation caveat: Cbs StartSession, error = 0 x 80070424
  2009-10-27 16:38:50:613 400 11e0 Setup FATAL: evaluation of applicability for the installation package ' WUClient-SelfUpdate-ActiveX ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.2.6001.788 ' has failed, error = 0 x 80070424
  2009-10-27 16:38:50:613 400 11e0 Setup FATAL: SelfUpdate check failed, err = 0 x 80070424
  2009-10-27 16:38:50:613 400 11e0 Agent * WARNING: jump scan, automatic update control returned 0 x 80070424
  2009-10-27 16:38:50:613 400 11e0 Agent * WARNING: exit code = 0 x 80070424
  2009-10-27 16:38:50:613 400 11e0 Agent *.
  2009-10-27 16:38:50:613 400 11e0 Agent * END * Agent: finding updates [CallerId = AutomaticUpdates]
  2009-10-27 16:38:50:613 400 11e0 Agent *.
  2009-10-27 16:38:50:613 400 11e0 Agent WARNING: customer WU didn't search for the update with error 0 x 80070424
  16:38:50:613 2009-10-27 400 11 CF to THE > # RETURN # to THE: research updates [CallId = {F9AECEA2-22DB-41ED-B8D3-E8DE15095E28}]
  16:38:50:613 2009-10-27 400 11 CF # WARNING: reminder of search failed, result = 0 x 80070424
  16:38:50:613 2009-10-27 400 11 CF # WARNING: could not find updates with error code 80070424
  2009-10-27 400 11 16:38:50:613 fc in THE #.
  16:38:50:613 2009-10-27 400 11 CF # END # in THE: research updates [CallId = {F9AECEA2-22DB-41ED-B8D3-E8DE15095E28}]
  2009-10-27 400 11 16:38:50:613 fc in THE #.

  1. This isn't the answer. As I said Modules Windows Installer, you can set as well. Besides a few months I posted solution for TrustedInstaller too in this popular topic:http://social.technet.microsoft.com/Forums/en/itprovistasecurity/thread/edfa02fc-8d5b-4f53-b04d-ca966d2355e7

  But...

  -probably it is post 100 in this content and probably nobody would read and moderators are too lazy to read & check all proposals for solutions

  2 Repair Installation should fix this error too - the best way if you don't know how to solve this problem that everyone order computer format
  You can also try the system restore (perhaps that someone has the correct control point)

  Sorry, Flavius, but your solution for systems where the Windows Modules Installer service are missing will only help those who have a Vista DVD .

  Most OEM does not include one with their systems, only the ability to write a rescue or Recovery DVD , NOT a DVD of the operating system .
  Most users will never understand how to extract a copy of WindowsInstaller.exe.

  And more English speaking users will have no idea how to follow your steps as it is fractured English , to put it kindly.

  That's why they need to contact the Support MS as support will send instructions, a copy of TrustedInstaller, a file of registry for Vista X 64 and the steps to follow to set the permissions correctly to replace TrustedInstaller.exe.

  Thus, in order , here are the steps to resolve the error IF the installer of Modules of Windows is listed in the Services console:

  (1) registry c:\windows\system32\wuaueng.dll from a command prompt
  (2) run sfc/scannow from a command prompt

  IF the installer of Modules of Windows isn't in the Service console:

  (3) contact MS Support if 1 and 2 fail
  (4) do an upgrade on the spot, better known to a repair facility, which will require to install all previously installed updates and/or the application of the last Service Pack which has been applied, which includes all of the updates issued before the Service Pack was released.

  MowGreen Services consumer safety update

• WINDOWS VISTA 32-BIT UPDATES

  CAN SOMEONE HELP ME GET UPDATES FOR WINDOWS VISTA 32 BIT?   I AM NOT GETTING THE ERROR CODES, JUST CONTINUES ON THE LEFT SEARCH BAR RIGHT AND DOES NOTHING. NOTHING IS FOUND TO DOWNLOAD. I'VE NEVER HAD THIS PROBLEM.

  Hi BluesBlaster:

  If your initial "check for updates..." Windows Update crashes during long periods without raising an error, this is a widespread problem currently affecting many users of Vista SP2.

  Some users find that "check for updates..." will be finally run full if you let run for several hours, but there is also a workaround solution posted on the page Web of Dalai to http://wu.krelay.de/en/ that accelerates the Windows Update for the affected users. Of workaround requires users to pre-install the kernel-mode Windows updates (Win32K.sys) driver listed on this Web page, if one is missing from your system before running Windows Update.  I used Dalai for the latest Patch workaround three Tuesdays (the second Tuesday of each month) and has reduced my search for 'check for updates...' updates available for 6 or 7 hours up to approx. 25 min.

  Step-by-step instructions posted on 16 June 2016 wire m #l's updates does not, it was the search for updates to the hours are based on workaround of Dalai and will guide you through the installation process of packages update stand-alone (.msu files) for your updates Win32K.sys missing.

  As of today (11-Sep-2016) the current list of updates Win32K.sys on the page Web of Dalai is: KB3078601 (rel. 18 August 2015); KB3109094 (rel. 7 December 2015); KB3145739 (rel. 12 April 2016); KB3164033 (rel. June 14, 2016); KB3168965 (rel. July 12, 2016); KB3177725 (rel. 9 August 2016). Just install the updates that are not in your system, so if you have been fully patched at the end of July 2016 you must have to install manually the last KB3177725 (MS16-098: a security update for the Windows Kernel-Mode drivers: 9 August 2016) before you run Windows Update to install your remaining August 2016 Patch Tuesday updates.  List of Dalai will probably be revised tonight next Tuesday when the September 2016 Patch Tuesday updates (and a new version of Win32K.sys) are released on 13-Sep-2016, then you might want to wait a few days to try this workaround.

  Dalai has posted general information at http://wu.krelay.de/en/info.htm which explains why the Windows Update Agent (WUA) is currently suspended during the "checking for updates..." Windows Update.  The current v7.6.7600.256 Vista, C:\Windows\system32\wuaueng.dll WUA has not been updated by Microsoft since June 2012.
  ------------
  32 bit Vista Home Premium SP2 * Firefox v48.0.2 * NIS v22.7.1.32 * MMFA Premium v2.2.1
  HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS

• Update of Vista 32 bit does not work after replacing the hard drive

  A month ago the hard drive of my computer (ACER Aspire 6920) had to be replaced. The disk image hard precedent (which includes the c: with Windows Vista Home Premium 32 bit, SP 2 build 6002) has been mirrored to the new hard drive. Everything seemed to work fine until I noticed that I don't have more updates from Microsoft. I tried a manual update and got the message that the update service was not working and I have to restart the computer. However, the Task Manager showed that the update service has been executed. Of course, I rebooted the computer, but nothing has changed.

  I found a whole bunch of recommendations for this issue in this forum, but nothing seems to work:

  • The Microsoft FixIT tool indicates a problem with the update of components, and then said that the problem had been solved successfully. However, the problem is still there and rerun the FixIt tool Gets the same message on a problem (yet) found and fixed.
  • I also stopped the update service, delete all content in Windows/C:\Windows\SoftwareDistribution and restarted the service. without success.
  • I've temporarily disabled my security suite (Eset Smart Security 6) and tried the update. I also have fittings the folder C:\Windows\SoftwareDistribution to the scope of the antivirus, without success. On the old hard drive, I used a different security suite so I thought that maybe the ESET (that I installed everything recently) could be the cause of the problem, but that doesn't seem to be the case.
  • I also followed the instructions provided by Microsoft at http://support.microsoft.com/kb/971058, but again, no change at all. However, it should be noted that registering some DLLs that Microsoft listed does not work (message that the DLL is not found or some server entry point (my translation, I'm using the German UI and don't know English good term; sorry) could not be found.)

  Http://support.microsoft.com/kb/947821 , I found another tool that supposedly can solve some problems of updating; I downloaded the version for Vista 32-bit, but it cannot install it on my computer (error code = 0xc8000247 during installation).

  So I'm really lost now what else to do. I would appreciate any suggestions. Please note that I am not technically very warned :)

  ARG, apologies.

  Was not aware that they had dropped support for Vista... (I myself have 'graduated' Vista earlier)

  The fact that you have not already installed TSRI is exactly your problem.

  Recent hard drives using 'Sectors 4 K', also known as 'Advanced Format Technology'.

  If the installed hard disk driver currently is not compatible with this specification,

  It will result in oddities like the status of the service Windows Update is not recognized correctly.

  Installation TSRI will fix this in most cases.

  Alternatively, if you are using Vista SP1 or later version (or 7 SP1), you can use the real driver.

  Since you are already updated to SP2, we will see if it is a viable solution.

  Go to: start-> Control Panel-> programs-> programs and features

  In the list of installed programs, locate and remove if found.

  -Intel Matrix Storage Manager

  -Intel Turbo Memory

  This should force your computer to go back to the real driver provided by Vista.

• By clicking on uninstall on Biz Vista 32 bit in Control Panel - not opening.

  By clicking on uninstall on Biz Vista 32 bit in Control Panel - not opening. No error message. Saw a mistake early on the osbaseln.dll not correct. Please help :) Try to install Windows 7 but recommended, I need to uninstall Windows Onecare. I'm unable to open the ' uninstall option.

  Try to download http://www.snapfiles.com/reviews/revo-uninstaller/revouninstaller.html Revo and uninstall the program using Revo uninstall Vista feature which doessn can't seem to work.  If it's only then you can move to Windows7 there is no real need try to find and correct the uninstall process if Revo works since that will be replaced when you upgrade.

  I hope this helps.

  Good lcul!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• window vista 32 bit freezing

  Hello, I use a notebook compaq presario v3700 series with pre-installed Windows vista 32-bit. The problem is that this os is recently freeze when I try to start a program, connect to the internet or I do nothing it still freezes up. I can even restart using Ctrl + Alt + Del.It is the complete freeze of mouse cannot move the button have no answer. Whenever I put the power source, and then restart the laptop. I didn't encounter this problem before there just after a year I brought this laptop.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Problems in porting windows vista 32 bit on a 64-bit Windows 7 machine device driver

  Hello

  I'm porting windows vista 32-bit on windows 7 64 bit machine printer driver. I have compiled DLLs. When I add printer and load INF file, I get the message that this driver is not compatible x 64 driver. Please tell me what adjustments should I do in the INF file.

  Thank you.

  Go to the printer manufacturer's website and download the right driver (free) for your operating system. You should also disable automatic windows update - Start, made driver installation computer right click go to the settings/settings/device installation properties / Advanced - value - not let me choose/never install updated win - save changes, remove previous attempts also to devices and printers, have the printer on but do not connect the usb cable until you are prompted - install driver downloaded.

  If there is no 64-bit Windows 7 drivers don't try the 64 bit Vista driver, if it does not work then you will need a new printer.

• A plugin is required to view this content on Vista 64-bit

  All I could find is the plugin for a Mac computer. Is there one for windows Vista 64-bit?

  Hello, no doubt that the message refers to flash: install the Flash plugin to display videos, animations and games

• Windows Vista 64 bit does not install last version of iTunes

  I just updated my iPhone, the recent phone must have the latest version of iTunes installed, I currently have 12.3 but I'm unable to download the latest version, I have Windows Vista 64-bit on my desktop, can anyone help?

  I don't think that Vista will support the latest version of iTunes, which is necessary for the latest version of iOS. I will check something quick and get back to you. What iPhone do you have? What happens when you try to download the latest version?

• For the last 2 days everytime I open to MY MSN, it opens in safe mode. I deleted cookies and the history of FF. all other sites open OK. Vista, 64-bit operating system.

  Vista 64 bit OS

  Thanks for the replies, the problem was on the Microsoft site itself and internal glitch for the last 2 days on the garbled causing MY MSN page without graphics and text.

• Vista 64-bit and D7360

  My Vista 64 bit laptop computer connects to my LAN via a wireless router.  My printer is connected to the USB port on my router.  My computer laptop 32 bit Vista print on my printer as expected.  My new laptop 64 bit will not print.  It goes into the print queue and just stays there.  If I connect my portable 64-bit on my printer via a USB cable, it will print.  What it will take to print when connected wireless to my local network?

  Did you mean that the machine is connected to the router via USB? What kind of router is it and a USB device on the router is treated like a network or USB device?

  I guess that it is treated as a network device. Installation of D7360 asks if the unit is placed on local (USB) or network, if the USB was chosen first, the SAME connection through network does not work. You need to reinstall the driver (or if you know pilots, you mangle via the reguistry). By the fact that you can print via direct USB, I think the easy way is to uninstall the driver (not just delete the printer) and install it again as a network device.