Msvcr90.dll valid not a Windows image.

Similar Questions

• Error: ' c: Windows\System32 shimeng.dll valid not a windows image.

  Original title: problem

  How can I fix this dll c:windows\system 32 shimeng.dll not valid windows image

  It is always sensible in this situation to achieve a malware check

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.Malwarebytes.org/
  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  Some malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:
  http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/

• Error message - file inetppui32.dll is not a valid Windows image

  Just started happening after years of use. Each computer xxx.exe file or I try to load I get this error message "xxx.exe - bad Image of the application or DLL C:\WINDOWS\SYSTEM32\intppui32.dll is not a Windows image. valid Please check this against your installation diskette. »
  When I click OK the file loads normally. The problem is that I do that about 50 times when starting. That means "Please check this against your installation diskette"? How this is done? How dooes one to take to solve this problem? Thank you

  Hello

  Please tell us a little more about the system. What is the brand and model of the computer? Do you remember anything specific that past that you think could have triggered these errors?

  In addition, please tell us what you run antivirus software.

  For more information, take a look at this and see the answer marked as the JoseIbarra response.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/error-the-application-or-DLL-is-not-a-valid/fa12c4dc-C175-4399-A0A9-f50aa085c901

  I hope this helps!

• Error when you click icon: the application or DLL C:\Windows\System32\ccfgnt32.dll is not a valid Windows image.

  Not a Windows image is valid. Help!

  At the start of my PC, and whenever I click on any icon I get the error message:
  The application or DLL C:\Windows\System32\ccfgnt32.dll is not a valid Windows image. Please check the Setup disk.
  At the start there are several, each with a file name of a program in the blue bar, i.e. "firefy.exe - bad Image" followed by the above statement. After you click the only option, 'OK', the system works well, but the message will continue to re appear after clicking on any icon on the desktop or the start menu.

  I need help with the removal of this question. I have not installed or run new programme before the start of last week. Thank you.

  3/15 - installed, updated and ran Ccleaner and Malwarebytes. Restart the pc after a successful run of each. Same question:
  The application or DLL C:\Windows\System32\ccfgnt32.dll is not a valid Windows image. Please check the Setup disk.
  Help please. Thanks in advance.

  CRR
  E-mail address is removed from the privacy *.

  Hello RRC633,

  I suggest that see you if you have corrupted system files.

  Click Start
  At the command prompt, type: sfc/scannow

  This will check for any violation of the integrity and repair any damaged operating system files. It may take some time to run.

  Reboot your system.

  The KB Article ID: 310747 - Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  If that comes back without any problems of integrity, then I would check the event viewer for errors in the application or system event logs.

  The KB Article ID: 308427 - how to view and manage the event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

  Please answer back with an update.

  Marilyn

• patch W32.dll DSI is not a valid windows image

  While the upgrade of my Quicken10 I found that an upgrade was necessary so I had downloaded on my computer, but when I try to install the message following application dll C:\documents and settings \all users\application data\int.it\quicken\net\common\patch\update\patch w32.dll poster is not a windows image invalid - please check install floppy what about this and I have not received a disc of Quicken for the upgrade , but a download. Is there a problem with windows?

  While the upgrade of my Quicken10 I found that an upgrade was necessary so I had downloaded on my computer, but when I try to install the message following application dll C:\documents and settings \all users\application data\int.it\quicken\net\common\patch\update\patch w32.dll poster is not a windows image invalid - please check install floppy what about this and I have not received a disc of Quicken for the upgrade , but a download. Is there a problem with windows?

  These errors can often be attributed to malicious software. Therefore, the first step is to make sure that you are not infected. The error can also be caused by incomplete or corrupt download.

  Click HERE. Download Malwarebytes. Update Malwarebytes and perform a scan.  Choose to quarantine found nothing. Once completed click HERE and download Superantispyware Portable. A quick, analysis in quarantine found anything yet.

  You can uninstall Malwarebytes if you wish after the scan. SuperAntispyware is portable and does not install. It will be deleted when you delete temporary files. Post back with the results.

• C:\WINDOWS\System32\danim32.dlll not a windows valid image message at startup

  HELP, I'M ON CLICKING
  When windows starts, it comes up with a box and in it reads DLLC:\WINDOWS\System32\danim32.dlll not a windows image is valid. On the top of this message on the right hand side of the box has a path of file name, bas.exe bad image.
  Please help me, I'm so sick of clicking on these boxes to get rid of them. There are only a few of them as well quiet.

  Thank you

  Dorothy salvation,

  There is a very good chance that you are infected with something, and we need to deal with this.

  First of all, update and run a full scan with any security software you use and delete everything it finds.  See if that helps.

  Then, try the following programs if you do not, because they can help. I recommend you download, install, update and run full scans with Malwarebytes:http://www.malwarebytes.org/and SuperAntiSpyware:http://superantispyware.com/ and then run a full scan of Microsoft Security:http://www.microsoft.com/security/default.aspx. This may or may not remove the infections, but will probably not correct the damage caused by them. Even if they or your current AV software seem to work or indicate that you are not infected, you should not completely trust in them and must continue with the recommendations that follow (so it's up to you if you want to try them first, or just ignore all this and get help from an expert you really need as described below).

  Correctly and completely remove these infections can be complex and often require manual removal procedures (which may or may not be entirely effective either). Even if they work, I suggest what follows in any case, so that we can start it (you can ignore the methods above if you want it really is the way forward, but it won't hurt to them for trying).

  Please follow these recommendations of JimR1 - MVP compliments:

  You are running Microsoft Security Essentials?

  If Yes: start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected - and support and select the option for phone, chat or email (options vary depending on the region)

  Whether you are or not, if you are in North America, you can call 866-727-2338 for a free Microsoft Help for infections of virus and spyware.

  SE not in North America or not using MSE:

  You can start here: https://consumersecuritysupport.Microsoft.com/ or here: http://support.Microsoft.com/contactus/cu_sc_virsec_master?WS=support#TAB0 for the help and support for malware infections.

  If this does not work, or that they can't help, try one of the compliments of forums-remove malware following PA Bear - MVP:

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?Board=10.0 http://www.spywarewarrior.com/viewforum.php?f=5 http://www.dslreports.com/Forum/Cleanup http://www.Bluetack.co.uk/forums/index.php and http://Aumha.net/viewforum.php?f=30

  I hope this helps.  When the system is clean, you can have damage to be repaired to restore some files from the system (or reset) - and there may be more damage but we have the system clean before we can deal with that, or he'll just continue to occur.  Remove the infections might also solve problems as well (if we're lucky) or experts offering you assistance may be able to help with that as well.

  Good luck!

• Windows Explorer crashes failed msvcr90.dll

  Friends

  I have this most annoying problem. It happens on my computer and the computer of a friend. I have Vista Pro 64 bit and my friend a Windows 7 Home Premium, also 64-bit.

  We both use the same two programs for a specific project, we want to do. A program is a data management program called FieldWorks, where export us the data in the format of LibreOffice. I think that this problem started during the installation of LibreOffice and then begins to export stuff in the program of FieldWorks.

  Very often, when we click on an exported file in .odt (LibreOffice) on the desktop, or simply click anywhere in a folder on the desktop, where we store .odt files, then immediately the Windows Explorer crashes with the following error message:

  Explorer Windows has stopped working. Windows can check online... Check online... The details of the problem are:

  Problem signature: problem event name: BEX64 Application name: the Explorer.EXE Application Version: 6.0.6002.18005 timestamp of the Application: 49e02a1e fault Module name: MSVCR90.dll fault Module Version: 9.0.30729.6161 fault Module Timestamp: 4dace4e7 Exception offset: Code of Exception 00000000000552d 4: c0000417 data exception: 0000000000000000 OS Version: 6.0.6002.2.2.0.256.6 locale ID: 1033 additional information 1: complementary 46e0 2 information: information additional 4ce498f1e2ebb3719af008d4ef97bedc 3 : 7 d 05 additional information 4: 729ac305dabb24e28fbe99019ecbbab7
  Also my friend and I get the exact same message and the same fault Module name and version. It can happen several times in a row, insofar as we cannot get to any of the .odt files in the folder via the Windows Eplorer window or desktop, but I got a remove the .odt file in a command window.  Otherwise just Explorer to crash. :-(

  I tried many things to fix this, among them:
  1. I re-entered the msvcr90.dll
  2. I learned that it is the program of MS Visual C++ 2008 that installs this msvcr90.dll and use it
  3. I removed all instances of MS Visual CC ++ Vista computer
  4. I removed all instances of the msvcr90.dll and restarted. Then I made sure that no file with this name has appeared again.
  5. even after that I still get this crash explore with this error message about this being the fault module msvcr90.dll!
  6. I used Windows find defective or missing files, sfc scannow. No gain.

  How this possible error, if there is no msvcr90.dll is left on the system? And no Visual C++ 2008?

  I then tried to reinstall MS Visual C++ 2008 SP1 Redistributable to see if that helped, but once again no change. :-( The same error came once again. This version of Visual C++ have not yet installed a version of msvcr90.dll but a msvrc100_XXX.dll

  Until I deleted the MS Visual C++ 2008 (and 2005 and 2010) of my system, I noticed that the existing msvcr90.dll was not even the same version that says that this error report is the version of the Module of fault!

  I am quite at a loss here. What can I do to solve this problem, which is annoying and time consuming? I could send one .odt files, someone at Microsoft to look at, or what?

  Thank you
  Calle2012

  The problem seems to be the shlxthdl_x64.dll:

  WARNING: Unable to verify timestamp for shlxthdl_x64.dll
  ERROR: Module load completed but symbols can be loaded for shlxthdl_x64.dll
  Failed to load image C:\Windows\System32\ieframe.dll, 0n2 error Win32
  WARNING: Unable to verify timestamp for ieframe.dll
  Probably caused by: msvcr90.dll (msvcr90 invalid_parameter + 70)

  The shlxthdl_x64.dll, which is at version 3.6.1.2, is a component of LibreOffice.

  The error that you are experiencing seems to be a known issue:

  https://bugs.freedesktop.org/show_bug.cgi?id=52078

  This problem can be fixed in an update of LibreOffice, so make sure you're running the latest version.

  If you are running the latest version of LibreOffice or if the error persists you can try the following:

  Go to the following folder:

  C:\Program Files (x 86) \LibreOffice 3.6\program\shlxthdl

  In this folder, right-click and rename the shlxthdl_x64.dll to shlxthdl_x64.old.

• Windows image acquisition

  I can scan is no longer on my canon D480 image class. I get the message "windows could not start Windows Image Acquisition (wia) service on computor local e.» Error 1068 the dependency service or group could start

  Hello

  One thing to check is the following.

  Open windows control panel, open administrative tools, and then open Services.  Make sure that the following services (order of th specified below check them) are all showing that status = started and the Startup Type = Automatic

  Remote procedure call (RPC)

  Detection material core

  Windows Image Acquisition

  If you need to make a change to one of the above, just right-click the service and select Properties, and then in the drop-down list box next to "Startup Type", select automatic and click on apply to save the changes.  Then click on the Start button.

  Kind regards

  DP - K

• only NTDLL. DLL error apply to Windows NT? I use Vista and should I NT?

  I get the NTDLL. DLL error message when I try to play Neverwinter Nights on Vista... I just noticed that I have a Windows NT file so if I am running Vista, can I get rid of Windows NT, or do I need to keep it for some strange reason?

  Hello

   
  NTDLL. DLL is not a Windows NT file, is a file system of Windows Vista. NT makes reference to new technology that Microsoft has adopted the Windows Vista operating system.

   
  Method 1:
  
  Run the System File Checker. Use the following link for assistance with the execution of the audit tool.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 2:
  
  

  To analyze the logs generated by the System File Checker, see the link below.

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228
   

• The application or the DLL C:\Program Files\Mozilla Firefox\MOZCRT19.dll is not a valid Windows image. Please check this against your installation diskette

  The application or the DLL C:\Program Files\Mozilla Firefox\MOZCRT19.dll is not a valid Windows image. Please check this against your installation diskette.
  Help, please. I was unistalling firefox and reinstall them again at least 10 times, but still does not solve the problem

  This has happened

  Each time Firefox opened

  few days back

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; InfoPath.2)

  I have the same problem

  deleted expletives - Maurane

• How to fix the application or DLL C:\WINDOWS\system32\SensApi.dll is not a valid Windows image. Please check this against your installation diskette.

  I got the message "the application or DLL C:\WINDOWS\system32\SensApi.dll is not a valid Windows image. Please check this against your installation diskette. "When I click on Start, point to programs, point to Accessories, point to System Tools, and then click Activate Windows.

  Thank you!

  The question that I already fixed. As your mentioned before, I have download SensApi.dll and stuck to C:\WINDOWS\system32\.

  After that click on Start, run and type regsvr32 sensapi.dll and then press enter.

  Restart your computer, it works now from.

• Error message - browseui.dll file is not a valid Windows image in the Windows XP computer.

  Original title: how to fix browseui.dll without original windows disc?

  Hello

  Well, kids, here's the deal.

  I myself locked out of my computer and installed PC login now erase my passwords. It has worked flawlessly, and I now have my computer back after months and months.

  There was only a single small strangeness: whenever I connected my computer, he asked me to check my drive. Looking forward to get my computer and running and customized how I like it, I bypassed it the first few times. Then, when I had a few minutes, I thought I had better let the disk check, so I left it.

  NOW, when I turn on my computer, I get an error message that my browseui.dll file is not a valid windows image and my windows Explorer does not work. So I've been doing on the web looking for a solution via the Task Manager, which is a pain. Someone suggested to use the scannow in the command prompt command line, so I tried, but it requires my disk of windows XP which I think can be in a different State with my mother.  So I simply bypassed it whenever he had the drive and VOILA! all peachy.

  Until, that is, I turn on my computer again. We're back in the same place.  Well, this analysis running and without going through the disc each time took me about an hour, and I can't do that whenever I need to use my computer.

  I tried the system restore, no change. I tried from the command prompt and choose a date AND choose "last good configuration" in the menu f12 or f8.  Without peanut.

  We are this:

  1. is there a way to correct this file without the disc?

  2. can I get another copy of the disk without having to buy it?

  3. Although I'm not PARTICULALRY, would be the Windows 7 upgrade solves the problem? (But I really like my XP...)

  If the c:\windows\system32\browseui.dll file is damaged or missing, Explorer.exe does not start and you may see a message like this:

  If the c:\windows\system32\browseui.dll file is corrupted, Explorer.exe does not start and you will see a message like this:

  Explorer.exe - bad Image
  The application or DLL C:\WINDOWS\system32\BROWSEUI.dll is not a valid Windows image.  Please check this against your installation diskette.

  You can click OK and get to an empty office with only your display background image but still be able to maneuver with the Task Manager.

  If missing the c:\windows\system32\browseui.dll file, Explorer.exe does not start and you will see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because BROWSEUI.dll was not found. Reinstalling the application may fix this problem.

  You can click OK and get to an empty office with only your display background image but still be able to maneuver with the Task Manager.

  Since we know that XP keeps copies of critical system files in the dllcache folder, you can use the Task Manager to replace the file missing or distressed.

  From the Task Manager, click file, new task (run...) and then click Browse and navigate to the c:\windows\system32\dllcache folder.  Make sure the "Files of type" box is set to show all files (or you will not see any), and then click OK to display all files.

  Locate the copy of the browseui.dll file backup in the folder c:\windows\system32\dllcache, made right click and copy and go back up a folder c:\windows\system32, right-click in an empty area and paste the file there.  Answered in the affirmative if invited to replace the existing file.

  You can then start the Explorer in Task Manager by clicking file, new task (run...) and in the "Open:", enter:

  Explorer.exe

  Click OK to launch the Explorer and your office must return.

  Or after replacing the file missing or suspicious, just restart the system task manager by clicking on stop and choosing restart and then Explorer will start to him only when the system is restarted.

  If your computer to check your drive at every reboot, which means the "dirty bit" on the volume was probably settled and the only way to clear the dirty bit must run a chkdsk/r (which XP trying to do).   The dirty bit can be defined on a volume if there is a power interruption e.g. (plug pulling, using the power button / stop, etc.).

  Sometimes, XP can't erase the bit of impurity in this way and it is preferable to run chkdsk/r from the XP Recovery Console so you can actually see what he does and run it again if necessary.

  If you do not have any bootable media XP start in the XP Recovery Console, you can create a bootable XP (no XP media required) Recovery Console CD and do all your work from there.

  You can even replace the file browseui.dll from SP Recovery Console if it is your desire.

  Need instructions to create a CD of bootable XP Recovery Console?  No Microsoft Support Engineer seems to know how to do this, but I do and will instruct you in the next reply.

• get a pop-up message "c:\windows\system32\ms32clod.dll is not a valid windows image.

  I get a pop up message "c:\windows\system32\ms32clod.dll is not a valid windows image" every time I start up windows XP.

  Can anyone suggest a solution please?
  Thank you
  Teabag123
  Hello
  • What were the changes made before the issue started?
  I suggest you return these methods:
  Method 1:
  I suggest you make a system full scan just to be sure.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
  Method 2:
  a. click Start, click run, type System32.
  b. enter OK
  c. find mcenspc.dll
  d. right-click on the file, then click on Remove.
  e. restart the computer.

• Why do I get "mscms.dll is not a valid windows image" on everything I try?

  I'm working on the kinks of swap hard drive in my Dell E310. The original tested 'ready to die' so I installed a new. I bought the backup for XP Pro disk, when I bought the computer. I loaded the operating system on the new drive and did the updates (80 or almost). I regularly get the message "the file or dll C:\WINDOWS\system32\mscms.dll is not a valid windows image."  What now?

  I've damaged my file mscms.dll on purpose and could not get any message about it even though I know that it is corrupt - maybe I wasn't quite hard.   I know that some other mscms.dll errors, but they are different.

  Tell me what you're doing to regularly get the message because I'd like to see it.

  After reinstalling and apply the updates of 80 or more, one of them was Service Pack 3?

  If you are not sure which SP you re running, click Start, run, and in the type box:

  Msinfo32

  Click OK to see your system information and Service Pack and what does say?

  If the rest of your system works well, you can use Explorer to navigate to the c:\windows\system32 folder and rename your file to mscms.dll suspicious to a name, remember (like: mscms.bad).

  So if your Windows File Protection is not working properly, it will notice the missing file and quickly and quietly, to replace the missing file with a backup copy.

  Wait a few seconds... then press F5 in your Explorer window to refresh the view and see that the file has been replaced and you have the mscms.bad and a new copy of mscms.dll.

  You should see a message like this in your newspaper observer event system:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64002
  Description:
  File replacement was attempted on the protected system file c:\windows\system32\mscms.dll. This file was restored to the original version to maintain system stability. The file version of the system file is 5.1.2600.5627.

  Restart and see how things look now.

  I can also send you a version SP2 or SP3 file mscms.dll via my SkyDrive and you can rename your suspicious file and replace to see if that helps your condition.  You might have some settings do not match here.

• The application or DLL c:/progna~1/windows~3/datamngr/datamngr.dll is not a valid windows image. Please check this against you instattation disk

  I am havin problems with my computer, when I start my computer or open a page or try to download anything it comes so far... The application or DLL c:/progna~1/windows~3/datamngr/datamngr.dll is not a valid windows image. Please check this against you instattation disk... I have a lot of problems in trying to solve how to fix this, as I don't know that much about computers. and I don't have the installation disc, I use windows xp I would be great if someone could help me please thank you. Kayleigh lindsay

  It also suggests that you can not run a software antivirus... If this is something you need to heal very quickly.  However, installing an antivirus application - if your PC is already infected - is usually ineffective.

  I suggest you do the following-
  (1) download and run a full scan using the Scanner for Ms.  Available here: http://www.microsoft.com/security/scanner/en-us/default.aspx
  It does not install, is therefore more difficult for malware to block.
  (2) if that was clean, then get an anti-virus in real-time as soon as POSSIBLE.  There are many good choices (Norton, McAfee, etc.) which costs money, and several good without applications, including MS Security Essentials available here: http://windows.microsoft.com/en-US/windows/products/security-essentials
  Note!  If you have another antivirus installed, do not add MSE.  Run two at once is precarious - they will conflict with each other.
  Also, make sure that your windows firewall is turned on, or you have another 3rd party firewall installed.