MTBF, MTTR SNS-3415 and TDS values

Similar Questions

• Redundant NIC ISE (SNS-3415-K9)

  Hi all.

  We can connect a SNS-3415-K9 (ISE) to VSS switches. We have a server (SNS-3415-K9) ise can be connected an interface (g1) to switch1 and an other interface (g2) at the switch2 for redundant and load balancing...

  Not in a link aggregation Group (LAG) or multichassi etherchannel as your question implies.

  You can use other ports Gigabit Ethernet beyond Gi0 but they each have a separate IP address. There are different ways you can use these and other restrictions as well (e.g. Admin PAN is restricted to the Gi0).

  The details are laid out in a table here:

  http://www.Cisco.com/c/en/us/TD/docs/security/ISE/2-0/installation_guide...

  There are a few Cisco Live presentations, you can look for some design scenarios. I highly recommend Craig Hyps BRKSEC-3699 ISE for scale and high availability design

  https://www.ciscolive.com/online/connect/sessionDetail.WW?SESSION_ID=837...

• SNS-3415-K9: hardware device console login reset password

  We brought a hardware appliance for small server secure network for the Applications of the NAC & ACS ISE: SNS-3415-K9. After the initial Setup, we have forgotten the IP address and the password for this unit. I access console on the server, but I can not connect because I forgot the password.

  I access MMIC, but I have no idea to reset password to log in to the console.

  Please help me.

  You will need to start using the installation media of the product you are using (ACS or ISE). Once you have started, you will be presented with a list of options, which is to reset the password for the admin user.

  Javier Henderson

  Cisco Systems

• What is the recommended size of repository to store saves the backups of ACS SNS-3415-K9, v5.4

  Hello guys, we need your advice :),

  do you know what is the recommended size of repository to store backups of logs of ACS SNS-3415-K9 (v5.4.0.46.0a software)?

  We intend to create an FTP server to record a monthly full backup and an incremental backup daily.

  We would like to consider the worst case in which ACS View Database is complete and a full backup is required and daily incremental backups.

  In the second period, we would appreciate really any advice on how to maintain, say, only the last 2 full backups and all the related incremental backups in the FTP server, is there a way to automate the removal of the oldest backup when a new backup is generated?

  Thanks in advance!

  Hi Rodrigo,

  Honestly, there is not a suggested size of space available to FTP/SFTP server used as the size of your backups of data base of progressive and complete view depend on 100% of the amount of newspapers ACS server receives every day, so what I would suggest to take a look at a couple of incremental for 2 consecutive days and would help you to determine what would be the amount that you need for a period of 30 days (one month).

  And associated with your concern if the ACS would supports the option to manually maintain the last 2 full backups view, unfortunately, it is not available as an option.

• ACS 5.3 on SNS 3415

  Is anyone ACS 5.3 running on a server of SNS 3415.

  It seems that it is not a mixture supported, I wondered why?

  Hello

  When Cisco release 3415 SNS the current version of ACS was 5.4. Developers had to make a different code for this device, because it uses own software and is another type of server.

  5.3 ACS was never develop working on this server, that of why you can't use ACS 5.4 or higher.

  If you need help with anything which touches the ACS do not hesitate to contact me. I used to work in support of Cisco AAA.

  Kind regards

  Erdelgad

• ISE 1.2 SNS - 3415 NIC bonding / grouping

  Hello

  I installed the SNS-3415 with ISE 1.2 and I try to configure the nic redundnacy (team) modes for requests for authentication and not for the purpose of management.

  Tests have shown that when an interface has been disconnected all was lost and nobody of our internal users was authenticated by the node of the ISE.

  However when I unplugged the "second interface" (possibly inactive) nothing has happened which shows which is a useless interface

  My goal is to connect it to my twins basic switches and have a deployment of high availability.

  -J' have enough search the Web but I have not found any clear and precisely the document to say how this could be done.

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_contro...

  THEMIS

  ISE 1.2 does not support grouping NETWORK adapters.  Especially on the devices.  There is a solution for the virtual machine using the ESXi host teaming network adapters so that it is transparent for the virtual machine.

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• read the type of variable and the value of LabView

  With the help of the TS. Class sequence that I try to get the type of variable and the values of local variables, parameter, fileglobal and stationglobal. Unfortunately I'm not able to find the right function. Hope someone can help me.

  Kind regards

  Lars

  Hello

  Maybe this simple TestStand example will help you.

  The API calls for LabView are the same...

  Hope that helps

  Jürgen

• How can I design square wave which has a positive and negative values equal to the other and separated from each other by controlled time or distance

  How can I design square wave which has a positive and negative values equal to the other and separated from each other by controlled time or distance, as indicated in the figure below. and enter this signal in a data acquisition.

  

  At the time wherever you go for the beautiful diadram, you could have done the vi

  Your DAQ would like a waveform (table of values and dt ak 1/sampling rate)

  If you set the sampling rate you know the length of the array, create a matrix of zeros and set the values of the two amplitudes...

  Because I don't want to connect other duties here are some photos

  And it does have a few drawbacks leaves to be desired in my solution, just think... rounding errors and what might happen if the tables are becoming more...

  

• the min and MAX values maintain their good values tia sal22

  the min and MAX values maintain their good values tia sal22

  Hi all

  I have problems a little value to stay in their correct min and max values min and max.
  Continue to change their values (up and down) trying to get the max value to only display the maximum value at a given time and the same for the min value.  I looked at the examples max and min and it seems that it should be in a while loop
  http://forums.NI.com/NI/board/message?board.ID=170&thread.ID=359822

  but I would add another while loop and if so put it in the loop for? or is there a better way to do it.

  TIA sal22

  Hi sal22,

  I thought it was just one example you found somewhere, because it is called red rooster. See the attached example.

  Mike

• IMAQ statistics block - minimum and maximum value giving 0

  Guy - can someone please test. Average and standard deviation give good numbers.  Min and Max are the two display zero (0).

  Thank you

  Don

  Do the Boolean calculate Min/Max? true to get Min and Max values.

• Help compare the negative and positive values

  Well guys, I do this example to show you what I mean

  

  With this example, I can get positive and negative numbers in digital

  But for me, the 'negative' mean nothing

  Example:

  If I have "100-200" for me the biggest value is - 200

  But if I compare the values of bouth got 100 as greater value

  I do the same calc for 3 different variables such as A, B, C

  and after that I need to calc whose value is 'more '.

  But my problem is that if I have the values "-350 300-400.

  the largest will be "300", but for me the 'negative' mean nothing

  so I need to the largest value is "-400".

  For all positive values, its works very well!

  I compare A and B, after the highest is on C and have a result!

  but when I have negative and positive values... I had this problem...

  and when I have negative values only I have a problem too.

  '-300-400-500' for me the largest value must be "-500" but labview-watch "300".

  as - 300 is greater than-500 in algebriac.

  And if I use absolute values, I will always have a positive value... but I need to know if the value is positive or negative

  No matter which, can help me with this?

  Thank you

  

  Ben

• Max and Min value for each column

  Hello!

  Can someone help me to change my. VI? I want to get the Min and Max value for each column in the table in the appendices. Then I need to create two tables 1 d - the first with the min and the second with the max value.

  I've already solved the problem the solution is below

• Send the name and the value of the control to Subvi

  Hi all

  I am trying to send the names and values of the controls to a Subvi.

  I know that I can check out the name and the value of the control by using a property node, but I was looking for a way to make is easy for the programmer to use.

  I think some sort of bundle function, it records the name and the value of the control, but I would like the programmer to be able to connect a random number

  controls to the Subvi without having to specify the number of controls Anywhere.

  I know there is stuff in labview configuration file, but it seems a bit more complex, so what I want to do.

  Also, I know that I can use the OpenG toolkit, but I will not use additional LabVIEW modules, as this VI may run on several different computers.

  I hope I made my problem clear enough!

  Good day

  Concerning

  Tommy

  What, creating an array of references to the command.  On the hand, you will need to fill the table with control references that you want to send to the Subvi.  In the Subvi, use a loop For with indexing to get every reference, and then use the nodes property to get the name and value.

• How meter and analog value FIFO synchorize

  I use a card NI 6123.

  Anyone knows how to put 6 analog values and the value of the counter in FIFO with the same rate: 4 k.

  Thus, every second, there should be 6 * 4 k analog values and 4 k in FIFO counter value.

  The problem is:

  1. the counter is a numeric value, so I can't put a sampling on it. So how can I put the value of the counter in the FIFO every second of 1/4000

  2. how to sync analog channels and channel meter.

  -------------------------

  DAQmxErrChk (DAQmxCreateTask("",&datHandler));

  DAQmxErrChk (DAQmxCreateAIVoltageChan(datHandler,"Dev1/ai0:5","",DAQmx_Val_Cfg_Default,-5.0,5.0,DAQmx_Val_Volts,NULL));)

  DAQmxErrChk (DAQmxCfgSampClkTiming(datHandler,"",4000,DAQmx_Val_Rising,DAQmx_Val_ContSamps,4000));

  DAQmxErrChk (DAQmxCreateTask("",&ctrHandler));

  DAQmxErrChk (DAQmxCreateCICountEdgesChan(ctrHandler,"Dev1/ctr0","",DAQmx_Val_Rising,0,DAQmx_Val_ExtControlled));

  DAQmxErrChk (DAQmxStartTask (datHandler));

  DAQmxErrChk (DAQmxStartTask (ctrHandler));

  -----------------------------------

  Thank you

  It is possible to apply for a meter in the buffer.  (this is actually preferred).  Simply specify a sampling and source clock.  Given that you want the meter to "lock" data from the meter to the same rate as the sample analog clock to simply specify this sample clock as the sample for the meter clock.

  An example of event in the buffer (life-long) count can be found here by using an external clock (your HAVE sample digital Instruments\NI-DAQ\Examples\MStudioVC2005\Counter\Count Events\CountDigEventsBuffContinuous_ExtClk clock):...\National)

  Check out this example and I think he should get you operational.

• Impossible to ACS 5.4 to 5.5 on an SNS-3415-K9

  Hello

  I try to install one of my Cisco ACS 5.4.0.46 with patch 5-4-0-46-6 5.5.0.46 version on a Cisco SNS-3415-K9 to 5.8.1.4.

  I have already installed the fix for pre-upgrade sharp-PreUpgrade -CSCum04132- 5-4-0-46 - 0 to .tar .gpg such as recommended by Cisco.

  When I run the upgrade, the process remains in 'Launch Application Upgrade' such as mentioned in the attached screen shot.

  Any suggestion please?

  Best regards.

  According to me, it's because of the stored data that causing problem with upgrade.

  4951688 3868528 827572 /storeddata 83%
  / dev/map/smosvg-recvol

  When you applied the upgrade bundle, it gets initially storeddata rental stores. If it doesn't have enough space, upgrade will fail.

  In order to erase stored data, you must contact TAC.

  Concerning

  Gagan

  rate: if it helps!