Multi-page printing on Laserjet 1102w

Similar Questions

• Where is the total number of pages printed on Laserjet P2055DN?

  Hello

  We recently bought a P2055dn LJ, which works very well. We are now on the second ink cartridge.

  I would like to know how many pages was printed completely. If I go to the page /hp/device/supply_status.htm I can see how many pages have been printed using the LAST cartridge. How can I see the total number of pages printed?

  Thanks for the good help on that.

  Calle2012

  At the front of the printer, you will need access the MENU via the LCD screen. Scroll to REPORTS and click ok, then scroll down to the configuration page and click ok. At this point, it should display a page of test/config auto with detailed info printer including the number of pages since its installation.

• Horizontal line going through random pages printed by LaserJet P1102w

  From time to time, I see my P1102w print pages with a small horizontal stripe. This happens only on a single page (not the one just before or just after). I looked in the manual and don't see in the troubleshooting section.

  I doubt that there is toner low, such that it has less than 1000 pages are printed on the current toner.

  Any suggestions?

  
  HP LaserJet p1102w

  Nothing on this page that you linked to, adapted to my problem.

  I just changed a new toner, and after 75 pages or more, I have yet to see this horizontal line randomly. It was printing on pages 5 to 8 or more, then it is a fairly representative sample.

  It is strange, however, assuming that it is the toner. I got about 1000 pages out of it, maybe less, but it is a bit disappointing. I put in when I am done with this new toner, just to get my money, but still...

• HP LaserJet P1102w worked very well and now just print 1st page of multi-page documents

  Hi, I used my printer for more than 6 months.

  Last month, has had the problem for a couple of days, then he went suddenly (yahoo, I thought).

  Has started again last night when printing pdf documents, it only prints the first page and then it seems stuck on page 2 (52% complete transfer appears on the windows printer).  For word, it seems to just take forever to print other pages...

  Running on a Mac OX X Yosemite.  Printer is connected with a wire (I was never able to complete the wireless connection and got too busy to spend more time understanding...).

  Tried to turn off my computer and then restarting him.  Also stop the printer and restarted.

  Thanks in advance,

  M

  Hi @MartineRB ,

  I see you are having problems printing multi-page documents. I would like to help.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the printer name) Then click the Add button.

  Try to print again.

  If you are able to print now by the USB connection and want to set up the printer on the wireless network, take a look at the following:

  Restore the default settings of the printer.

  Turn the printer off, press and hold the wireless button and the Cancel (x button) button while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  Printing a Configuration Page. Select the method two.

  Make sure that Safari is set as default browser. Sometimes, the built-in Web server will not open if it is not.

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Here's a Youtube video of the Laserjet P1102w on Maverick wireless installation.

  LaserJet P1102w.

  You can follow the steps instead of the video.

  You must connect the USB cable from the printer to the computer to install the printer as a USB device first and then to configure the wireless network.

  Turn on the printer, connect the USB cable and install the update from Apple that should load automatically.

  Then go to the Apple, system preferences, printers and Scanners.

  Highlight the Laserjet on the left side of the window.

  Then click Open Print Queue, click settings, click utility, click open printer utility, then click the button HTML Config.

  The integrated for the printer Web server opens.

  Click on the network tab, select Wireless on the left side.

  Fill in the information for your network. Status make sure that you select enabled.

  Apply the settings.

  Then go back to the Apple preferences system, printers, and Scanners and click the + to add the Hello Laserjet Printer. (may take a few minutes to appear) Make sure that the printer is listed beside the use: displays the name of the correct printer and not the driver by default, and then click the Add button.

  Remove the USB printer in the list of printers and Scanners window.

  Unplug the USB cable.

  Test the printer.

  If you need help, let me know.

  Good day!
  Thank you.

• HP Laserjet 1102w: my HP LaserJet 1102w not print large documents via wifi

  Hello, I have two HP LaserJet 1102w news. I installed and configured via the wi fi and it the test page prints correctly.

  The problem is when I try to print large documents (with more than 400 KB). In this case the printer says "print...". "and in the printer, the green light flashes but not print the document. If I print small documents, it works OK.

  If I do a ping to the printer with packages of more than 8 000 bytes, I get 'timeout for this request. If I do a ping with packets of 8 000 bytes, I get the answer in 5-6 ms.

  Both printers has the same problem. I have different devices connected to the local network, and it all works well. I have another printer that works well with large documents... so the problem is not the configuration LAN or WiFi.

  What can I do? Thank you!

  Well, I solved the problem.

  I'm going to 'devices and printers-> right click on the printer-> properties-> Advanced tab printer' and check 'installed the driver. In my case, there is no "HP LaserJet 1102w", who is the best driver. So I remove the device and has installed, and I get the right driver "HP LaserJet 1102w.

  Now the printer works OK.

• Printer HP Laserjet Pro M201dw: Drop-outs of HP M201dw print after the 1st page of the multiple-pg docs

  Installed M201dw HP laserjet on home network: router Asus Dark Knight (RT-N66U).  All PC running IE 11, Win 7/64 Prof.  Config page shows no IP addr for printer.

  Printer does not print more than 1 page of multi-page documents.  PCL XL Error message print at the top of page 2 and printer abandoned the remaining pages in the print job.  Printer display reads "Ready"; serial printer ' wireless on.»  No error message on PC.   No special printing parameters for employment; sided printing.

  Latest printer driver downloaded from HP; printer "USB001 Virtual printer for USB Port."

  Note: Took 3 hours to install this printer 'plug and play '.  Installation kept failing.  And, earlier this evening, when the printer was falling asleep, all computers thrown off network... None of this was happening until we added the printer to the network.

  Can anyone help with our printing problem?   If not, it goes back to the store before April 30 and I'm going to buy a used HP 1200.  (Thank you, in advance, for any help you provide.)

  All your suggestions had already been verified or updated before posting, but kept for lack of print documents from PC Word.  Called HP technical support never coming back as they promised, so I was wondering what was different between implemented for HP M201dw and previous HP printer laserjet that printed very well... and it was the printer port.

  Automatic installation, put in place a port USB001 wireless printer... the port should be Port TCP/IP Standard.  Once the port has been changed, all printed documents without fail.  (This will, we hope, also fix PCs disconnection from the WIFI when the printer goes to sleep). Printer port has been at the origin of the recent problems of printing with printer upgrades or changes to router and I should have changed it first, but I assumed that the Technical Support representatives two HP I knew on the phone knew better.

  Thanks for all your suggestions.  I appreciate the time you took to provide as much detail.  You can now add "try changing the printer port" to your suggestions!

• HP C6280 All in One Printer: unable to save the scanned document of multi page as on the single Document using the Preview on IMAC computer

  I recently reinstalled my drivers on my IMAC computer to correct some strange characters appearing when printing from Microsoft word via Parallels.  The relocation at this time and the time has fixed this problem.  My most recent issue is not able to save a scanned document of multi page into a document using an excerpt?  In the latest that I had to do was high brightness, scanned documents to be saved and presto, all were saved under one.  Now you have to go save each of them at a time.  If you have a 5-page document, you need to go through the registration process 5 separate time create several documents, which is a big waste of time.  I have also my C6280 DPL 100 size should be a problem, I think.  To correct even any help would be greatly appreciated.

  RG.

  Hi @RGrantB3,

  Welcome to the HP Forums! I'd love to help you analyze documents several pages in a single file. When you scan, you select PDF as the format scanning? When you select the PDF file, you should see an option to select, save all pages in a single file, or a variant of this option.

  If you do not see this, please post a screenshot of you scanning settings for I can visually identify the issue.

  How to take a screenshot on a Mac.         How to post a picture on the HP Forum s.

  I can't wait to hear back on your part. If this resolves the issue, please click Accept as Solution button below so that others can see what has worked for you. Thank you.

• My printer HP LaserJet 1536dnf printer prints black pages after replacing the toner with a new one!

  I changed the toner cartridge for my printer HP LaserJet 1536dnf with a genuine HP toner cartridge and now it's printing the pages in black.  Any suggestions on how to fix this?

  Thank you!

  Hi @Beaglemom49779,.

  I see by your post that you have replaced the toner and now get all black pages. I can help you with this.

  Have you had the same problem with the printer before replacing the toner?

  It could be a hardware or with the printer fuser problem.

  If the problem started just after replacing the toner then most likely, the toner.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  Number one cause of problems with toner.

  Check if the drum unit for damage:

  1. remove the cartridge of toner product and check that the tape has been removed.
  2. check the memory chip for damage.
  3 examine the surface of the imaging drum on the bottom of the toner cartridge.
  CAUTION: Do not touch the roller (Imaging drum) on the bottom of the cartridge.

  His fingerprints on the imaging drum can cause print quality problems.
  4. If you see the scratches, fingerprints, black on the drum, or any other damage on the imaging drum, replace toner.
  5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem is resolved.

  Please call our technical support if the there is a problem with the toner and you learn about a replacement, to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Contact HP.

  Good day!
  Thank you.

• HP LaserJet 5200tn: y at - it an option to print the ip address or the name of pc at the bottom of each page printed, sent by this pc

  y at - it an option to print the ip address or the name of pc at the bottom of each page printed, sent by this pc.

  I don't think that there is no easy way to do it.

  Alternatives can be:

  • Maybe insert the data required in the document source (before printing), using features (such as headers/trailers) supporrted by application of document source (for example, Word); drawbacks to this are not all applications supporting these inserts and (once inserted) what happens if the source document is copied to another work station?
  • Rather than insert "pc name" or "ip address", you can maybe automatically insert 'document name' on each page ( watermark) If you are using one of the latest HP Universal Printer Drivers - see http://h30434.www3.hp.com/t5/LaserJet-Printing/Print-current-date-on-each-document/m-p/5734909 for a brief discussion of something similar ('date/time' rather than 'username').

• Pages with "GET /DevMgmt/Discoverytree.xml HTTP/1.1" unwanted printing on Laserjet 2015b

  I have a HP Laserjet 2015 d in WIN7 (32 bit) with a USB connection.  I keep getting unwanted with pages printing:

  "GET /DEVMgmt/Discoverytree.xml HTTP/1.1".

  "Host: 127.0.02:8080".

  I found similar positions to the other HP LaserJet but their repair method did not work for me, because I don't have an option "Printer Status notice" which is noted below.

  --------------

  (repair method mentioned in another post for the 2055dn printer)

  Please click on start-->

  Printers and devices-->

  Double-click the printer (PCL 6)

  Double click on customize your printer

  Click device settings, and then check the list and together following: -.

  Notification of printer status: DISABLED

  Apply

  Ok

• Multiple page printing slow when using narrow pages (LaserJet)

  Hello everyone,

  I am running a printing service and using the printer HP Laserjet Printer 1606dn (I used also other models, such as the Laserjet 1006, Laserjet 1300 and other models).

  I have a problem with the speed when printing on pages that are narrow as A4 (need to my client that I print on the pages of 26.9 x 18.8 cm). I need to print a large number of pages a day, and during the test with the same paper in A4, it prints very fast. But when printing on the page size to custom, the printer get a single page, impression on her (very fast), but then he wait about 15 seconds to get the next page.

  It seems that there are sensors that detect the page is close that that of the A4, and if the printer do not get quick pages.

  I test a lot of software options (like saying that the printer paper is 'standard size' (as Executive), impression in RAW format, and so on), but I ralized it's a problem of size of paper width.

  Can you help me please?

  Thank you

  Luis Cardozo

  Paraguay

  I found a solution. It has to do with the sensors.

  In the upper part of the printer, where the book comes out, there are 3 sensors, one on the left, one in the middle and one on the right. They are little pieces of plastic that opened or closed from the optical sensors (I think).

  When a page dies, it activates the sensors. When a page is close, active not one (or two) sensors on the sides.

  I tested this way: I put my narrow paper not centered, but on the right. The sensor on the left, I 'activated', by placing a small piece of paper under the sensor (it seems like a paper go there). And... it works!

  PRINT FAST!

  But as BLLuten said, it might overheat the fuser unit.

  So, my question now... is what would happen in case of overheating of the fuser unit? (or, in the printers HP, Fuser will get overheated?)

  I think I'll work with this little hack, but with a fire extinguisher to next to me, as a precaution.

• OfficeJet Pro 8610 X 64 8.1 win question over both sides of the pdf, Word Doc multi-page brochure printing.

  HP Officejet Pro 8610

  HP Envy laptop

  8.1 Windows X 64

  Printer will not print back of the pdf booklet by choosing the best quality.

  Get the message "Cancel printing" on printer when trying to print the second side.

  kicks then paper.

  In addition, printer does not multi make page print job when printing on both sides Word 2013

  document.  Stops at random page number, get message «Cancellation of print» print

  printer.

  Complete features uninstalled and reinstalled software by following the instructions

  by HP Support Forum's message dated 23/09/2014.  Problem

  There are still.

  Hey!

  So happy to hear that everything is in place and functional for again you!

  Please take the time to click the button of "acceptable Solution", while others may see this post and they can get a fix quickly. Also if you want to say 'Thank you' click 'Bravo '. I would really appreciate one or both of these actions because it makes things easier for the new people on the Forums to get help fast.

  Better luck in the future and have a great day!

• deaf new laserjet 1102w made noise when printing

  I just bought a laserjet 1102w to replace an old laserjet 1002. The fact 1102w one muffled loud noise every time it well a piece of paper causing the Office to shake.  Is this normal with this printer now or make me a defective printer?

  Hey Stafic,

  I would like to go ahead and launch HP Hardware Diagnostic Utility to see if it is able to determine if there are hardware problems. You can download the tool here: HP Hardware Diagnostic Utility

  Run the tool and post back with updates.

  Thank you

  Sean

• HP LaserJet P1606dn of duplex professionals second page prints upside down

  Sided printing worked fine when I arrived at the printer.  Now second page prints upside down.  I tried to install the driver XPS that worked once, but not now.  I have at least 8 copies of XPS Laserjet P1606dn of professional on my computer.  None of these troubleshooting options on any of these working copies.  I tried to reinstall the software of origin, but in vain.  Now the only copy printer I have that works, one side only, is hp p1606dn copy 3.

  Help, please

  Success, finally.  The application of service worked for me, after several tries.  I was able to remove all instances of the printer and re install.  The professional p1606 HP Laserjet still printed upside down, but after having installed the XPS (a previous forum suggestion suggestion) version it worked.

  Thank you.  I'll search the app of congratulations and give him a boost upward!

• How can I get the total number of pages printed on my LaserJet 3055?

  I have a nice 1012 LaserJet that is not supported in Windows 7, but there is a solution which is to set up a Vista driver as if the printer is a LaserJet 3055.  It works, even if sometimes I get a printed statement that it does not work, and when that happens I just turn off the printer and turn on again immediately and it is fine.  I would like to know if there is anyway I can get the total number of pages printed at some point, as I could with the LaserJet 1012.

  P.S. This thread was moved from software for Laserjet. -Hp moderator of the Forum

  Please ignore my post on the LaserJet 3055.  With the help of a good soul on another thread of discussion, I was able to install and operate my LaserJet 1012 printer on Windows 7, exactly as it did in XP.  No errors, no slow printing, no problem.  The LaserJet 3055 thing helped initially as a work around, but the message about the bad personality who stopped the printer until you turned off and turned it back was boring.