deaf new laserjet 1102w made noise when printing

Similar Questions

• M601: Manufacturing of Laserjet M601 clicking noise when printing

  I have a laserjet M601, which has just started to make a rattling noise when it prints.  Looks like it is close to the top right corner before somewhere under the screen.  It snaps when a page is caught to start printing.  I hear a 3-5 clicks when the paper is caught, then it stops for the rest of the page.  If multiple pages print, click before the beginning of each page to be printed.  All other prints are normal.  The print job ends very well and all is well.  I only hear it clicking now and it seems to be deteriorating.  Thoughts?  Thank you.

  Hello

  I have some further thoughts on this. Are you sure that the manual tray loading produces noise? They use different pickup assemblies. If we have confirmed both tray 2 and Tray 1 (manual feed tray) produce the same noise that we have to look at what they have in common. Toner, transfer roller, editing of the main landing gear, & fuser.

  What type of toner cartridge do you use? If possible can you exchange with others and print a test page? If the problem persists, what is the number of pages on the printer? Have you recently replaced a maintanece kit?

  I work for HP, supporting the HP Experts, who volunteer their time and expertise to help others.

• Photosmart 6520 clicking noise when printing

  When printing I hear a rattling noise, as if the gears are not mesh correctly when the carriage moves.

  Thanks for the info. The noise started just after I had replaced the cartridges, but it seems to have stopped now.

• LaserJet CP6015dn made noise every 30 seconds

  When the printer is turned ON, not printing, it made a loud noise similar to a hard drive every 30 seconds.  The noise lasts about 1 second, but he keeps doing and it starts to annoy him those sitting near him.  He started to do it directly out of the box.

  Everyone knows this?  -Thank you

  I turned in a support ticket, and they said that it was part of its normal operation.  About every 30 seconds it turns slightly battery to prevent them from developing the flats.

• LaserJet 1000: HP LaserJet 1000 began "screeching" when printing

  I would get this repaired printer, but have failed to find a repair service in the Kansas City area. Can anyone provide information about where I might find the service?

  Index of the HP does not work well.  Best bet is to search google using HP Laser Jet 1000 repair and your location.

• printer makes a noise when you go to print as it jumps CMV

  Hi I have a Photosmart B109n. When I go to print a document from the print head moves and just before the paper is loaded in it starts to make a noise as it jumps the right wheels. It can't all the time but most of the time now.

  Help, please

  Hello scales,.

  How old is your printer? Looks like you're right in the fact that the internals of the printer are not lining up properly or the gear wheels is damaged.

  Addresses of this article, the printer of the noises when printing, so it can help with your problem, but the end result has the printer repaired.

  The product makes noise when printing

• LaserJet pro p 1102w: laserjet 1102w pro p

  You just bought a new laserjet 1102w pro p. It installed very well and prints, but it allows you to select a startup infallibly and executes the rolls of food every 15 seconds. I guess that the engine burn eventually if it maintains this doing.

  I rebooted it, unplugged the usb and removed and reinstalled the toner, but happening again all day.

  Is this s factory default?

  Hello @ cozjason,

  Welcome to the HP forum.

  I understand that your new laserjet 1102w P continues to go the beginning upward.

  I want to help you with this.

  LaserJet printers can be 'finiky' when they do not receive adequate food.

  Your printer is connected directly to a wall outlet?

  If it is connected to a surge protector or power bar, I would remove them from the printer.

  If the printer is plugged directly into a wall outlet, then I would try the reset that I sent you.

  Click on the little envelope in the upper right of your screen to retrieve the message.

  If that does not clear the issue would call technical support. They will be able to determine if there is a problem with the printer and replace the device under warranty.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• HP LaserJet 1102w paper tray error message

  Recently my LaserJet 1102w ceased to duplex print. Instead, after printing the first side, it gives an error message: feeder must be filled.

  The bin is full, but I can't continue to print on the other side, no matter what.  It has become a huge problem, even when printing jobs front.

  Any ideas?

  Hello

  Once you replace the pages in the feeder, try to opening and closing the door of access to the cartridge page Word the print job and check whether that prints on the other side.

  Hope that helps,

  Shlomi

• New Laserjet M1212nf MFP does not copy or scan. Not taking in the documents document feeder

  Product: Laserjet M1212nf MFP

  OS: Windows Vista 32-bit, Windows 7 64 bit

  USB 2.0 connection

  Scan software Readiris Pro

  Have installed a new Laserjet M1212nf MFP. When I send a document to print, it produces an impression outside, well wrapped on the ends because of the heat.

  The copy function and the scanner or never do not produce print outs. The bar with light moves on the copy/scan with the light area, but no print out.

  In addition, for the copier/scanner document feeder does not pages.

  I installed several LaserJet using a number of operating systems in the past.

  Best wishes

  Shanefg

  Hi Shane,

  Thank you for the additional information. You experience a hardware problem with the scanner in the printer mechanism. The following additional options depending on your current status of the warranty on this printer.

  In the guarantee:

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  Out-of-warranty options:

  http://support.HP.com/us-en/document/c02652026

• HP Laserjet 1102w: my HP LaserJet 1102w not print large documents via wifi

  Hello, I have two HP LaserJet 1102w news. I installed and configured via the wi fi and it the test page prints correctly.

  The problem is when I try to print large documents (with more than 400 KB). In this case the printer says "print...". "and in the printer, the green light flashes but not print the document. If I print small documents, it works OK.

  If I do a ping to the printer with packages of more than 8 000 bytes, I get 'timeout for this request. If I do a ping with packets of 8 000 bytes, I get the answer in 5-6 ms.

  Both printers has the same problem. I have different devices connected to the local network, and it all works well. I have another printer that works well with large documents... so the problem is not the configuration LAN or WiFi.

  What can I do? Thank you!

  Well, I solved the problem.

  I'm going to 'devices and printers-> right click on the printer-> properties-> Advanced tab printer' and check 'installed the driver. In my case, there is no "HP LaserJet 1102w", who is the best driver. So I remove the device and has installed, and I get the right driver "HP LaserJet 1102w.

  Now the printer works OK.

• Photosmart 5510 not printing and noises when toggled or asked to print?

  About 6 months ago, we purchased our printer HP Photosmart 5510 alongside our Touchsmart computer, and so far, both work fine.

  However, there are a few weeks at random, when I sent a document to print, the printer started making a very loud noise, sounding almost as if he was that something stuck in the back there. Only to make the noise stop, I cancelled the printing and has turned off, which again triggers intense noise. This back on once again, he made the same noise and, before moving on to the usual display a notice on the monitor of printer flashed by saying that the device had extinguished itself incorrectly.

  It lasts for a few weeks now, and after having scoured your Web site for all the details, I couldn't find anything on this issue. After detecting that other factors may have come into it, I watched some of your videos on how to fix etc. paper jams. After pulling some paper in the back, I thought the culprit of all this, the message on the monitor said he had a 'ink cartridge problem' or could not detect the paper, even if we just replaced the ink and I have to reload the paper. I watched the videos of these two problems troubleshooting and tried 20 seconds thing etc, but nothing worked.

  Really, I'm so frustrated and I would like a little help from a very kind person out there?

  

  Hey mollycat,

  It seems that there is a problem with the power of the printer mechanism paper.  If the unit was loud noises, then it might be a part out of alignment or a piece of paper caught in the unit.  However, you mentioned the continuation of the measures is stuck, remove the paper, and now the printer gives error ink system.

  I will provide documentation of troubleshooting below for the two issues, but if these steps don't erase the question then I would advise to contact HP Technical Support on this printer.  Is it is only 6 months old, then it would still be under warranty by the original manufacturer.

  An "Out of paper" message on the control panel and the all-in-one doesn't pick up paper

  An alphanumeric Code (example: ' 0 x 'r' C2...) ") or 'Ink system failure' Error Message is displayed on the front panel when printing

  To contact HP Technical Support: contact HP worldwide | HP

  Hope this helps,

  Jason

• LasrerJet P2015n: Low error when printing with ePrint to a LaserJet P2015n on iOS supplies

  "Hi, I'm using the HP LaserJet P2015n, which works very well, however try to print using ePrint on iOS 8.3 seems to cause problems. If the application finds the printer on the network, and try to print, it invites a mistake "we have detected you are low on supplies error" obviously is not the case, because it is more than 50% of the full and prints very well using the desktop computer. The printer error LED keeps blinking and won't not even respond to a request for printing office. It must be restarted to work again.

  Tried all kinds of reboot and reset. I also tried to find a solution with no luck, there is no updated firmware for this printer can be found as well.

  Any help will be very appreciated!

  @hussain316

  Thank you, based on the information you provided... the p2015 is not taken care of with ePrint. That's why whenever you send a print job for printing, the printer responds with error messages and you have to pick up then power cycle the computers can be printed successfully on it.

  If you want to start mobile printing, then you will need to upgrade to a new printer with function ePrint. Depending on your price range, the new m277 is a nice little printer and has this ability.

  Sorry

• LASERJET 2420: hp2420 LASERJET ATTN LED FLASHES WHEN THE WORK of PRINTING SENT. ATTN PRESS MUST BE ON EVERY PRINT JOB TO PRINT

  hp2420 LASERJET ATTN FLASHING WHEN PRINT JOB SENT. ATTN PRESS MUST BE ON EVERY PRINT JOB TO PRINT

  You have a control panel on the printer which should have a post about that.  Most of the time this occurs when the size and or the type of paper, the work of the application is not the same as the printer settings and pressing the button you tell the printer to use paper so that it is set.  Most of the time the best solution is to define the type of paper and size and everything and all at once for tray 2 which should solve the problem.

• My Pro9000... Cannot get black ink to print in black. installed new catrdidge and made 3 deep cleanings.

  I have a Pro9000 Mark II... I can't black printing black ink - it comes out grey. I installed new catrdidge and made 3 'deep cleaning' and test pages see the normal... any ideas?

  "I work a LOT with this printer to work.

  How is "MUCH?  There may be a defective print head.  Things wear out, but if that's the case yo u can replace.

  But I'd rather see buy you a new Pro-100.  The cost would be close, if you find one on sale and you would have a more updated printer to date.

• the white pages when printing for laserjet pro 200 color MFP M276nw

  When printing to my color Laserjet pro 200 M276nw MFP, the pages are all empty.  I tried to put off the printer and tried to have disconnected and reconnected.  That did not help.  The pages are still blank.  Any suggestions?

  You are unable to print the 'print quality Page' of the façade or do not know how?