multi-site VPN with just the cisco vpn client

Hello everyone

Please I need your help.

We have a headquarters office and up to 60 is BranchOffice, we want to create VPN network between its. so let's deploy 2 router cisco esy vpn server with HA (HSRP) at the Headquarters Office and all branches have Connection ADSL and they will use just the cisco vpn client to connect to the Headquarters Office.

My question is: is it possible to do it just with the client vpn cisco without purchased for any exercise bracnh a cisco router to create an ipsec tunnel because it is so expensive?

It depends on if the routers to offices can handle NAT with several internal VPN clients to 1 IP address. Most of the new material should be fine. Keep in mind the maximum limit of the VPN client, with 60 agencies and 5 people each of whom you are above the limit.

Michael

Please note all useful posts

Tags: Cisco Security

Similar Questions

  • Multi-site VPN problem

    Greetings,

    I practice implementation of VPN and it seems to have fallen on a small issue that solution eludes me.  Everything works in my current topology with the exception of a multi-site vpn.  I have 3 ASA, which is outside the interface is connected via a switch.  The inside interface is connected to a local area network that contains a workstation on each subnet.  I'm trying to set up a solution where I can have all 3 ASA related between them via a VPN.  The question I have is when I raise a single tunnel, scathing from a workstation behind the ASA, I can't set up a second tunnel scathing from a different network.  To explain that better, here is an explanation:

    ASA #1

    outdoors: 10.0.1.1/24

    inside: 192.168.0.1/24

    workstation: 192.168.0.100

    ASA #2

    outside: 10.0.1.2/24

    inside: 192.168.1.1/24

    workstation: 192.168.1.100

    ASA #3

    outside: 10.0.1.3/24

    inside: 192.168.2.1/24

    workstation: 192.168.2.100

    If I ping 192.168.0.100 192.168.1.100, the tunnel opens very well and I get answers.  If I can try and ping 192.168.0.100 192.168.2.100, does not open the tunnel to 192.168.2.0.  If I clear all its on ASA #1 and then ping 192.168.0.100 192.168.2.100, the tunnel opens very well and I get a response.  Then I try and ping 192.168.0.100 192.168.1.100 and the same thing happens, no tunnel and no response.  When I enabled logging on ASA #1 seems that it sends the ping for the different network on the tunnel open instead of opening a new tunnel to the correct network.  Can someone tell me what is happening here and if I just missed something simple with routing?  Or is it maybe a problem with VPN?

    Craig,

    You have default route badly configured on all the ASA. Here's what you have configured

    ASA1

    Route outside 0.0.0.0 0.0.0.0 192.168.0.1 1

    It's sendning the package for outside inside IP address. Here's what you need to do on the ASA

    ASA1

    No route outside 0.0.0.0 0.0.0.0 192.168.0.1 1

    Route outside 0.0.0.0 0.0.0.0 10.0.1.2

    ASA2

    No route outside 0.0.0.0 0.0.0.0 192.168.1.1 1

    Route outside 0.0.0.0 0.0.0.0 10.0.1.1

    ASA3

    No route outside 0.0.0.0 0.0.0.0 192.168.2.1 1

    Route outside 0.0.0.0 0.0.0.0 10.0.1.1

    Also delete icmp access list crypto that you allowed to what IP is the same access list. IP covers both the ICMP.

    Kindly let me know change default allows traffic.

    Kind regards

    Bad Boy

    P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community

  • Im not able to open pages. I have a white screen with just the border sites. Can you help me?

    Im not able to open pages. I have a white screen with just the border sites. Can you help me?

    Hello

    1. did you of recent changes to the system?

    2. what Web browser do you use to navigate the web pages?

    3. do you get an error message?

    Method 1:

    Follow the link below and check if that helps.

    http://support.Microsoft.com/kb/945385

    Method 1: Troubleshoot Internet Explorer.

    http://support.Microsoft.com/kb/956196

    Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

    In addition, check out the link below and check if it helps.

    http://support.Microsoft.com/kb/956197/NL

    It will be useful.

  • Does anyone know why the tabs on my firefox is no longer tell me the name of the IM site, they show just the symbol of the site IM on?

    Does anyone know why the tabs on my firefox is no longer tell me the name of the IM site, they show just the symbol of the site.
    I have the latest additon of firefox and only noticed this today... so not after I've updated, the name of the site appears if I move the mouse over the tab but it flashes and will not stay there, I can't seem to find a way to get the site back on the tab name... Help please!

    Hello, you can try to reproduce this behavior when you start firefox in safe mode, once? If this isn't the case, maybe an addon intrudes here or there is a problem with hardware acceleration...

    Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  • Can a crook hack an iPad with just the iPad serial number

    AN alert came on my iPad while I was with safari and he said I had a virus and I had to call a specific number to solve the problem. I called and hey asked me the serial number of the iPad, and I gave that person and after that he seemed suspicious, so I hung up. They always have my serial number, so I was wondering if they can hack the iPad with just the serial number?

    This serial number is linked to your iPad. The call is a scam!

    If you have configured authentication code your on your iPad, even if they have the serial number it should not make a difference.

    If you have not set one, do it immediately > use a password with your iPad, iPhone or iPod touch

  • How you can follow an ipod 6 with just the serial code

    How you follow an ipod with just the serial number 6

    You do not have

    No application on the iOS device is necessary.

    -If you have previously enabled FIndMyiPod/iPhone/iPad on iOS device in settings > iCloud and wifi is on and cellular data or connected are turned on and connected on a desktop browser to iCloud: find my iPhone, login and go to FIndMyiPhone. If the iPod has been restored it will never appear or continue to show offline.

    -You can also wipe/erase the iOS device and have the device beep via iCloud.

    If your iPhone, iPad or iPod touch is lost or stolen

    iCloud: erase your device

    iCloud: use lost Mode

    -If this is indicated, then you will need to use the old-fashioned, way as if you lost a wallet or purse.

    -Change the passwords for all accounts used on the unit and the police report and carrier if iPad iPhone or cell

    -There is no way to prevent someone from restoring the clear operation (it erases it) use it except if you have iOS 7 or later version on the device. With iOS 7 or later version, you must enter the Apple ID and password to restore the device.

    -Apple won't do anything without a court order

    Declaration of a lost or stolen Apple product

    - iOS: how to find the number of serial number, IMEI, ICCID MEID and CDN

  • Just updated to Firefox 29.01 it does not at all. When I opened it that won't load sites that shows just the busy circle floating around forever. It is unusable.

    28 Firefox worked fine, but when asked a pop up opening firefox update to 29.01 I found there was a lot of security issues for 28 so I've manually updated to the 29.01 by going in "subject, check updates, etc." Once downloaded 29.01 and got told to restart, I restarted firefox. When I opened it, I found that it is unusable. It will not open a single Web site. It does not load my homepage. It has all my before Favorites from the Favorites toolbar, but I can't go to anything. I closed and tried to run cc cleaner as I always do, but I get the message "firefox takes too long to close would you like to force a shutdown", but the forced shutdown does not close it no more. I opened the Task Manager to try to close it from there, but firefox does not appear. I don't know what to do. I am all this typing chrome b/c I can't use the latest version of firefox. I've never had this happen before. I also ran in safe mode and it's the same thing. Please help and please answer in simple terms, because I'm not a computer expert. I took a few screenshots I'll join. In fact, I don't see anywhere to attach a picture so I can not. Also, I don't understand the green "add automatically" button which is located under this box on the support page of mozilla. Also, when I went to help, on the page in the upper corner of firefox just now to check the version it says "firefox is updated by another body." That the devil which means? Never seen it ever. Appreciate any help.

    Well, then I can say happily that I'm typing this on firefox yay! I managed to do work, and here's how it is for everyone who is having this problem (well at least this is the solution that finally worked for me). RESTART your computer. NOT simply stop there. It does not work (not for me at least). I rebooted the computer initially there are a few min b/c my was not analysis Norton and I wanted to analyze the new 'new installation' I had to FF. After the computer has been restarted, my norton worked. So I said Hey, maybe I'll give you my FF update 29.0.1 a last try before you install a new firefox, in the hope that maybe restart the computer would have worked. So I opened it and omg he loaded my homepage. It works! In addition, among other first problems I've come across is impossible to bookmark a site. I found the solution. Just go to the upper menu right (it has 3 horizontal lines) and right-click the little star icon that we're used to that means bookmarks. A small menu will appear. Click on "move to the toolbar", and which should put it on the top right of your browser so that you can bookmark things. Hope the tip of restart helps anyone who was having the same problem I was Firefox being unusable! And if you have the bookmark problem, hope it helps you too. Wow. I am so happy that I can finally use FF now! Also, I kept the setting of "no hardware acceleration off the coast." Do not precisely know what that did, but leaving since that works. Oh, one last thing: I closed FF and ran cc cleaner and had NO problem with her telling me that FF would not close. Then restart the computer that solved this way. Yay!

  • Firefox on the laptop of my wife lost the black bar that displays maps, Gmail etc. Now at the top of the screen there is an empty bar, triple height, with just the Google search box entry. How can I get that back? Or is it a question for Google?

    When I open Firefox there is a black bar, sometimes vertical, sometimes horizontal, in the upper part, with links to maps, Gmail etc. When I opened Gmail the same links are listed at the top of the screen, just under the tabs. In my wife's cell phone, it appears in the Firefox splash screen, but not in the form of Gmail. In the top of the screen is an extra-large gray bar with just one Google search box entry. Is this a problem of Firefox or Google?

    She has XP Home SP3 and Firefox 9

    Thanks for any help.

    Is there still the Google URL in the address bar?

    Reload Web pages, and ignore the cache.

    • Hold SHIFT and click reload.
    • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
    • Press 'Cmd + Shift + R' (MAC)
  • I set up Windows 7 to use fingerprint or password to logon. How can I get rid of the fingerprint logon and back by connecting with just the user names and passwords?

    I have configured Windows 7 to use the fingerprint or password login screen. I can't footprint material and do not want to use, but can not find where you reconfigure to return by connecting with just user profile names and passwords.

    Hello

    Welcome to the Microsoft Vista answers Forum!

    You can try the steps below and check if the problem is resolved.

    1. click on start.

    2. click on Control Panel.

    3. click on hardware and sound.

    4. now click biometric devices.

    5. now click on biometric parameters.

    6. now you should check biometrics off the coast of the option button.

    7. click on save changes.

    8. click on close.

    Now search for the question.

    Learn more about the biometric device, you can visit the link provided below.

    http://TechNet.Microsoft.com/en-us/library/dd759228.aspx

    Thank you, and in what concerns:

    I. Suresh Kumar-Microsoft Support.

    Visit our Microsoft answers feedback Forumand let us know what you think.

  • Toshiba Satellite c855-S5123 does not work with just the AC adapter

    My Toshiba Satellite laptop c855 Windows 8 has suddenly stopped loading and when the adapter is plugged. The light output at the front was not lit and the loading icon was gone. I tried another outlet but nothing, I also removed the battery, but it does not light with only the adapter. Finally, I opened the laptop to check if the plug was broken and I also tested the power provided by the card - that everything is perfect. Currently, my battery died, so I really need help.

    Hi Davis,.

    I have problem is with the hardware in the computer. I suggest you to check the problem with Toshiba. Please follow the link below to send the query on the from Toshiba Web site:

    http://forums.Toshiba.com/T5/computer-troubleshooting/CT-p/cat_troubleshoot

    Hope this information is useful. Thanks for posting in case you have any additional questions, I'll be happy to help you.

    Thank you.

  • Record of equipment for the Cisco AnyConnect client NAM module

    Hi all

    Forgive me if this has been asked before or on the Cisco site somewhere (I could just find)

    Are there hardware specifications for the Cisco Anyconnect Network Access Manager module?

    Where can I find what wifi chipset is compatible with?

    Thanks in advance for your answer.

    Compatibility with the NAM module is based on the chipset not guest OS. The current operating system compatibility is listed here.

  • I'll buy a first ASUS Tablet soon and want to know if I can sync with my PC at home. If I don't have a wireless connection, can I still do it with just the effect wireless.

    Looks like the Firefox Sync is just for PCs and phones. If I buy a tablet that has a wireless capability but I'm not going to buy a phone plan, e.g. with AT & T, I'll still be able to synchronize my information from tablet with my home PC? It works like McCloud?

    Sync can work with any instance of Firefox 4 or more. It synchronizes your bookmarks, history and passwords to another instance of Firefox. https://support.Mozilla.com/en-us/KB/how-do-i-set-up-Firefox-sync

  • Can I reinstall Windows XP and Office 2007 with just the numbers, product keys, and no disc.

    I have three old computers in my house.  All three begin to show serious signs of just getting old.  I was recommended to clean my computers.  I would like to reinstall my Windows OS and reinstall the software of my office.  I've lost my records over the years and moving, but still have my product key numbers that I kept in my office files.  Is it possible to reinstall it without a disk?

    BCorb,

    I suggest you call the computer manufacturer and request for an XP CD will be sent to you. It should be for only a few dollars, like $10 or more because it is an OEM copy.

    For the Office CD, if it came with the computer you could probably try to ask them to send a copy as well, although I do not know if your computer manufacturer did.

    See you soon ~!

  • I gave my grandson my old iPhone 4 to play games. He is running out of room. Can we reset and set up with just the games without phone connected to it

    I gave my grandson my old iPhone 4s to play games. If we reset can we set back without a phone number?

    Of course, just erase content and settings. Let the car SIM card you will need to activate Apple. Once turned on, remove the SIM card and use it effectively as an iPod touch.

  • I would like to sendby send the content of a site html (not just the link)

    Hello
    In Safari, I have a html Web page (that I realized for newsletter emailing) which I click then under file > e-mail this page content and it creates the page in the body of an email in Mail. I just while you add addresses. Cannot find where in Firefox, I can do similar things. It will only send a link, not the page. Thank you

    Sorry, the one add-on that I know which adds this functionality to Firefox, has no last updated for versions of Firefox 3.6.

    https://addons.Mozilla.org/en-us/Firefox/addon/send-page-by-email/

Maybe you are looking for