Multi-stations for cloning operations

Similar Questions

• Multi-systems for network operations

  I currently have a c4240 all-in-one printer, it is connected to my desktop computer only witch going on Vista x 64.  I can't do the printer works on computers laptops xp or even Vista 32 bit.  How to remedy.

  THX

  Just got a few steps from a co-worker about Vista printing to a shared printer on XP. Try these steps and see if it works.

  How to share the printer among computer Win XP and Win Vista computer.

  Step 1. Unplug the USB cable to the back of the Windows XP computer and connect the USB directly on your Windows Vista PC.

  Step 2. The drivers for your printer Windows Vista should be automatically loaded and your printer will be installed on your Windows Vista PC. If this is successful, skip to step 3.

  If step 2 is not successful:

  i. download the Windows Vista printer driver for your printer from

  www.HP.com.

  II. install the driver on your Windows Vista PC. During the

  Installation, you will be asked to connect the printer to your computer.

  Choose the option to proceed with the installation without the printer connection.

  Step 3. Once the installation is complete, open the Printers icon in the control panel of Windows Vista.

  Step 4. Make a right click on your printer has just been installed and choose Properties.

  Step 5. Go to the Ports tab.

  Step 6. Click Add Port, then select Local Port, and then click New Port.

  Step 7. The name of the Port, enter the path correct network and share the name of your printer.

  Step 8. Click OK and make sure that this new port is selected with the checkbox.

  Step 9. Click on apply, then OK to close the printer properties.

  Step 10. You should now be able to print from your Windows Vista PC on a shared printer on your PC under Windows XP.

• Should I buy a Base Station for my Apple products to use Time Machine?

  Should I buy a Base Station for my Apple products? I have a Netgear CG3000D-RG gateway and also use Windows with this modem/router. I'm not able to backup using time machine and bought an external hard drive PassPort but I find it pretty annoying having to plug it in to my MBP whenever I want to do a backup. I would like to use the most convenient airport on my MBP feature, however, it seems pointless unless I have connected to my Netgear router/Modem base station. If I have to buy a base station to make the backup of my MBP easier? I also use 6s and iPad Air iPhone. I would be able to save these features too? Thank you!

  1. you must either have a Time Capsule or connect the drive to your computer when you perform a backup.

  2. Time Machine isn't back from iOS devices directly; they should be stored on a computer and the computer saved Time machine.

  (144712)

• Docking station for Satellite Z30 - A - 1-2

  Hello

  I'm looking for a docking station for my laptop, Satellite Z30 - has - 1 2.
  Can you please help me find the right model?

  Thank you!

  Hello

  I found some info that you can use Hi-Speed Port Replicator III. The price is about 220 Euros.
  In any case, before order you you can check compatibility with your local dealer.

  One last thing: on the compatibility of the list your will find Portege Z30.-a. This model of Toshiba is in fact identical to your Satellite model.

• Is there a docking station for the Qosmio series?

  I would definitely buy a docking station for the Qosmio (I bought the F10 but not yet received). Does one exist? I suspect that the answer is no, because I couldn't find anything on the site, but maybe someone knows for sure...

  Hello

  Laptops Qosmio not usable with port replicator. As already said kypros only external USB docking station can be used.

  Good bye

• HP 15-g010dx: I need a docking station for my hp 15-g010dx

  I need to find a compatible docking for my laptop.  Any suggestions?

  Thank you

  Yes, HP is no more real "docking stations" for its consumer laptops. A docking station is a platform of snap down which provides power to the laptop and replicate ports and allows extensions such as additional hard disks, etc.. Best you can do is use a USB 3.0 "port replicator", many of whom come with video and all the ports that you might want to but not powering the laptop computer. You must always connect a power adapter directly to the laptop to use the port replicator.

  There are a lot of these on the market. HP makes one and others, too. Post back if you need assistance. Expect to pay about $100 + / for one with video.

  https://www.Amazon.com/HP-3005PR-USB-port-replicator/DP/B008KMDVPQ/ref=sr_1_1?ie=UTF8 & qid = 1475009377 & SR = 8-1 & Keywords = HP + USB + 3.0 + Port + Replicator + with + HDMI

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Spectrum Notebook: Who are compatible docking station for portable spectrum?

  Who are compatible docking station for portable spectrum? The new spectrum has only c type ports.

  Have not tried this one or seen the reports on the question of whether it works with the spectrum, but in theory it should. The only thing I don't know is if it will load spectrum, but I use a charger HP USB - C that was not specially designed for the spectrum (OEM charger is too big to carry around) and it works so I would say that it would work. $ 150, I am tempted to get one myself. I also have the Zbook dock for my G3 Zbook 15 loan but there one owner dual usb - C and the connector of power PIN for the laptop that doesn't work on the spectrum.

• I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I use a processor 2.3 GHz Intel Core i5 with DDR3 4 GB 1333 MHz memory.

  My last similar attempt on another machine resulted in a very slow computer.

  Thanks, Ron

  Apple says the following:

  General requirements

  • OS X 10.6.8 or later version
  • 2 GB memory
  • 8.8 GB of available storage

  For best performance, I would say not less 4 GB and preferably 8 GB or more.

  Your i5 is well able to support properly.

  http://www.Apple.com/OSX/how-to-upgrade/#Hardware Configuration

• Satellite A350 - Toshiba service station for Win 7 does not work

  I'm on a Toshiba A 350 and downloaded Toshiba Servc\ice utility Station for win 7.
  It does not open (even if the admin rights).
  The TsmachInfo service is started in srvices.

  Workarounds or I have to install something more to this work?

  Hello

  As far as I know you have to unpack everything first, and then you will need to run the exe file
  Check this box

  Otherwise it s an OS issue because the exe file should work fine and you should be able to install this tool.

  Welcome them

• Is there a docking station for the NWZE385B?

  I just bought the MP3 Walkman of NWZE385 drive and am wondering if there is some docking stations for it. Or, Alternatively, if there are elements of 'conversion' which make it compatible with other docking stations. I have not found anything online, but I would check here before abandoning the idea.

  Thank you!

  Hi heresmeg,

  Please click the link below.
  You can use one of these portable speakers for your player via the AUDIO IN port.
  Please use the necessary cable.

  http://store.Sony.ca/search?searchterm=Portable+Bluetooth+speaker

  Thank you
  > Joffrey

  If my post answered your question, please mark it as "accept as a Solution.

• What are the choices of Sony Docking Station for a Sony VAIO VPCSE27RX/B computer laptop 15.6 "?

  What are the choices of Sony Docking Station for a Sony VAIO VPCSE27RX/B computer laptop 15.6 "?

  dant23,

  The docking station for a VPCSE2xx (15 ") is VGP-PRS25.

• HP DV7-3063cl laptop PC: what is the maximum temperature for safe operation of the DV7 3063 cl with the upgrade of the 640 M CPU?

  I have recently restored a HP DV7 3063 cl laptop that died a hot mother (MB). I replaced the MB with a new Board of Directors of HP when the price has been reduced to $100, updated the CPU with an announced as new AMD 640 M and applied Arctic Silver on CPU and graphics chips. I put in 4 G memory cool, got the computer to work and installed Windows 10.

  The computer seems to run very hot and stopped twice from overheating during its first period of 2 weeks when it there was not a lot of calculating, fan was run at top speed at all times, and the laptop was high to allow good airflow below.

  According to the program of the Open Hardware Monitor, the CPU had reached 97-99 C a few times. I bought support cooling a player and that seems to help a lot, dropping the temperature to 20 ° C.

  What is the maximum temperature for safe operation of the DV7 with the upgrade of the 640 M CPU?

  Anything more than 90 c is too hot. You can specify the processor and the motherboard you have installed?

  Also if this from the Manual:

  Thermal paste is used on 1 CPU and heat sink section 2 that the services it. Thermal pads are used on the chip Northbridge 3 and 4, the graphical subsystem chip 5 contact Northbridge and graphics/heatsink contact 6. Thermal material replacement is included with all kits of spare parts of processor, heatsink and system board.

  So unless you have changed the cooling system to heat composed on the chip graphic you should have used a thermal buffer. Without the pad, it may leave just a small hallway and destroy the cooling properties. You can use a shim in copper or other piece of something metal to fill the void, but if you just put the heat sink down on the video chip you won't get optimal even with thermal cooling paste.

• Docking station for VPCSA4FGX

  Could someone kindly tell me what is the model number correct for my VPCSA4FGX port replicator?

  Greatly appreciated.

  Hi davidvpcsa,

  The docking station for VPCSA4FGX is VGPPRS20.

  Nick-

• IMAQ Vision: The image is not big enough for the operation (Imaq WriteToPNG.vi)

  Hi all

  I was stuck for a few days trying to get my work VI and get this error. It is as simple as to save a graph of intensity as an IMG, he works with JPEG formats but my graph is U16 grayscale and it is not supported by the jpeg format so I didn't get the expected results. Then I went to the PNG format and the error "the image is not big enough for that operation" appeared. I tried to resize as aid error NOR suggest, and got the same error, anyone has an idea on what could be the problem?

  Hello Bob,

  Thanks for the tips, I'll post my code in future issues (since I already solved this one). As you say, there was something wrong with my code, the code in the image actually worked well, but doesn't have the part where I wrote to the variable (the variable was not being written if its value is an array of 0x0, not big enough actually). Thank you!

• Universal docking station for Lenovo T430 and X 201

  Hello

  I am looking for a universal docking station for both my en T430 my X 201 laptop.

  It must have a minimum of 2 ports usb + a HDMI output to connect to my TV. A displayport (mini or normal) is also correct.

  THX in advance for the help.

  http://www.DisplayLink.com/shop/docks

  You would need to port usb Replicator options, but noted that these devices require usb 3.0 ports. So for your X 201, you need to get an expresscard usb 3.0 card adapter.