Multi-track, audio in the window muffles when it reaches a volume envelope.

Similar Questions

• First item 14: WinTV ts Multi track Audio file number

  I just downloaded trial version of ss14 to test ts WinTV (file) of mounting and discovered multi track audio issue.

  I recorded the football game and imported the file ts at ss14. The problem is, I can hear the sound of the game but the comment disappeared. I can hear the sound of the field but broadcasting comment disappeared. I don't think that there is no audio problem in advertising, but I there is no audio commentary during the game.

  The mixing table"Options" displays 'AUDIO 1 - first plan', 'Voice - leading', '-background music ", 'AUDIO 2 - Background', 'AUDIO 3 - Background'.» I have no idea what track is that.

  I tried to change the setting of 'VOICE' for 'Background', but I got error message saying "one or more selected files could not be automatically analyzed. Whenever I tried to change the setting of the mixer, I received the same error message.

  (I tested another ts file, this saved time TV series, but the result was the same. I could hear the background music, but there is no voice.)

  Can you tell me how I can fix this audio problem?

  Here's my ts file info:

  Format: MPEG-TS

  File size: 22.2 GiB

  Duration: 3 h 12 min

  Start time: UTC-2016-08-25 23:59:51

  End time: UTC-2016-08-26 03:12:35

  Overall bit rate mode: Variable

  Overall bit rate: 16.5 Mbps

  Act score: n/d

  Video

  ID                                       : 49 (0x31)

  Menu ID                                  : 3 (0x3)

  Format: MPEG Video

  Format version: Version 2

  Format profile: Main@High

  The format, BVOP settings: Yes

  Format settings, matrix: Custom

  Parameters of the format, GOP: Variable

  Format settings, picture structure: framework

  Codec ID                                 : 2

  Duration: 3 h 12 min

  Bit rate mode: Variable

  Bitrate: 15.1 MB/s

  Maximum bit rate: 24.0 Mb/s

  Width: 1 920 pixels

  Height: 1 080 pixels

  View picture format: 16:9

  Frame rate: 29.970 (30000/1001) FPS

  Color space: YUV

  The chroma subsampling: 4:2:0

  Color depth: 8 bit

  Scan type: interlaced

  Analysis order: upper field first

  Compression mode: lossy

  Bits /(pixel*Frame): 0,242

  Stream size: 20.3 Gio (92%)

  Audio #1

  ID                                       : 52 (0x34)

  Menu ID                                  : 3 (0x3)

  Format                                   : AC-3

  Format/Info: Audio Coding 3

  Mode extension: CM (complete main)

  Parameters of the format, "endianness": Big

  Codec ID: 129

  Duration: 3 h 12 min

  Bit rate mode: Constant

  Bit rate: 384 Kbps

  Channel (s): 6 channels

  Position of the channels: Front: L C R, Side: L R, LFE

  Sampling: 48,0 kHz

  Rate: FPS 31,250 (1536 spf)

  Compression mode: lossy

  Behind the video:-331 ms

  Stream size: 529 Mio (2%)

  Language: English

  Audio #2

  ID                                       : 53 (0x35)

  Menu ID                                  : 3 (0x3)

  Format                                   : AC-3

  Format/Info: Audio Coding 3

  Mode extension: CM (complete main)

  Parameters of the format, "endianness": Big

  Codec ID: 129

  Duration: 3 h 12 min

  Bit rate mode: Constant

  Flow rate: 192 Kbps

  Channels: 2 channels

  Position of the channels: Front: L R

  Sampling: 48,0 kHz

  Rate: FPS 31,250 (1536 spf)

  Compression mode: lossy

  Behind the video:-299 ms

  Stream size: 265 Mio (1%)

  Language: Spanish

  Text #1

  ID                                       : 49 (0x31)-CC1

  Menu ID                                  : 3 (0x3)

  Format: EIA - 608

  Multiplexing mode: A/53 / DTVCC Transport

  Muxing mode, more information: multiplexed in Video #1

  Duration: 3 h 12 min

  Bit rate mode: Constant

  Stream size: 0.00 bytes (0%)

  Text #2

  ID                                       : 49 (0x31)-1

  Menu ID                                  : 3 (0x3)

  Format: EIA - 708

  Multiplexing mode: A/53 / DTVCC Transport

  Muxing mode, more information: multiplexed in Video #1

  Duration: 3 h 12 min

  Bit rate mode: Constant

  Stream size: 0.00 bytes (0%)

  If there are several audio channels on your media clip, you won't have to hear all the individual channels in Premiere Elements. Premiere Elements cannot separate the audio for the comment, commercials, football game, etc.

  The music, the voices, the Audio 1, etc., on the Smart mixer see audio track on your timeline. And you should be able to tell who is who, looking at the timeline and see which audio clips are on each track.

  If you can't understand it, post a screenshot of your timeline on this forum and we will tell you.

• Do I still need to run the Windows Firewall when I use Norton360?

  Do I still need to run the Windows Firewall when I use Norton360?

  Hello

   
  A firewall is software or hardware that checks information coming from the Internet or a network, then it blocks or allows it to pass through your computer, depending on your firewall settings.
  A firewall can help prevent hackers or malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers.
  A firewall is not the same thing as an antivirus program. To help protect your computer, you need a firewall and an antivirus and anti-malware program.
  
  Norton 360 from Symantec's all-in-one security service that protects your computer and your data against today's Internet threats.
   
  Norton 360 can be functioning as an antivirus, firewall, or offer according to your settings.
   
  We recommend that you only have an antivirus and a firewall on your computer, the choice of what antivirus or firewall is yours.

• Impossible to move to the window 10, when you click on 'Download now', 'save' and 'run' on pop consequent ups happen

  Original title: window 10

  Hello

  I have Windows 7 and am unable to upgrade to window 10.  I have a Pavilion dm4 laptop with 4 GB RAM and 359 GB available hard drive.  When I clicked on 'Download now', 'save' and 'run' on consistent pop ups nothing happen, although there was a security warning, but I was able to download programs, I tried with this warning without fail.  Can anyone help?  Thank you very much!

  Jeannie

  Review:

  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• How can I get multi channel audio via the HDMI port on an early 2015 MacBook Pro?

  I try to get the 7.1 audio channels to flow from my MacBook Pro to a cinema set up. The display works fine now I plug the HDMI in however the sound still Mac speakers. I checked the settings and no HDMI output is available. An airtime option is available, but that returns only two channels as a maximum to the receiver. When I go to the configuration of the source on the receiver it receives video at 1080 p 60herts however it is specifically stated No Audio from the Source.

  Also, I have connected my iPhone 6 s more using an Apple through the same HDMI cable adapter and it works perfectly. We also use HDMI with our PS4 occasionally and it works perfectly, even with the 3D.

  Thus, the MacBook Pro is early 2015 with an i5, the receiver is a Harmon Kardon AVR 2700 (we run 7.1 channels of this) and we are connecting via the HDMI port through a 50 ft HDMI before. The receiver sends the audio to a projector with 1080 p 60 hertz if it changes anything...

  Also if it helps the receiver supports dts - hd master audio decoding, Dolby True HD/Digital Plus decoding, HDMI 1.4 (HDMI is compatible 2.0), as well as multi-channel input and PCM and linear PCM.

  I use a "Behringer UCA202' audio device I bought on amazon.com for only $29.

  It works very well for the audio 5.1 or 7.2. Works connect optical toslink. Just plug it into a usb port on your Mac and a cable optical toslink to your AV receiver.

  My Yahmaha 7.2 audio/video receiver is measuring process the digital signal in THX, DTS, Dolby digital Pro logic, a cinema, etc.

  

• HP ENVY 15: Problem with audio after the Windows 8.1 update

  Hi, I'm on HP ENVY 15 notebook PC and I updated my windows 8 to 8.1. Until a few days back, everything was fine. However, now, I have no audio through speakers or head phones. Can someone help me please to solve this. Thank you.

  Product number: E4N80EA #ABZ

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

  Once the reinstallation is complete, shut down the laptop by pressing the SHIFT key when you click Shutdown to temporarily prevent a hybrid boot.  Then disconnect the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• False track audio times with Windows Media Player.

  I use Audacity to record LP's and then burn it to a CD with Windows Media Player. When the pieces are added to the Windows Media Player burn list, channel 1 and 3 always show the track record time for 9 & 8 minutes adding unused time at the time of the correct record.  I can only get 60 minutes or less on a 80 minute CD.

  Hello

  Run the troubleshooters and see if it helps.

  Open the troubleshooting Windows Media Player settings Troubleshooter

  Open the troubleshooter in the Windows Media Player library

  Hope this information helps.

• Screws disappear from the windows taskbar when running

  Hello!

  It is a strange happening in the world when running LabVIEW 2014 or 2015 on Windows 7.  When the VI property-> the appearance of the window-> Custom-> customize-> box 'allow to minimize the user window"is unchecked the VI disappears from the taskbar when running.  It is moderately annoying, anyone know if there is a good reason for this behavior without papers?  Other than to keep the box checked, is there another way to prevent that from happening? I don't really feel like swapping through all possible combinations. :-)

  Thank you!

  C

  In fact, it's documented behavior.  Access the help file for this dialog box properties.

  There is a note that says:

  

• Updates the window appear when shutting down, but do not set up the next time you start

  The display shows 15 updates of Windows are loaded (installed?) when the machine is stopped.  To restart Windows, the screen indicates "wait" while the updates are being configured.  The icon indicates that the configuration is current, but the screen always said that "0% are completed.  Then, after a few minutes, the screen indicates something as "installation failed; Revenant.  After the message 'return', the machine moves to the usual Windows 7 start page and asking to connect you as usual (which allows me to work on the machine).   So, the next time I shut down Windows, the screen indicates that the installation of several updates continues and is completed in series.  Then, the next time I turn on the machine it asks to wait while updates are configured;  and finally, it "fails to complete the configuration" and "resets" as described above.  What happened several times in the last two days.  What should I do to get this resolved failure?

  Hi BonnieDoon,

  1. did you of recent changes on the computer?

  2. you receive error message during the update by installing the process?

  Method 1

  See the Microsoft article below as well as try the steps mentioned and check if it works.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  Method 2

  Restart the computer after you follow the steps above and check if the problem persists, if the problem persists then checks the update is not being properly installed on the computer and then install it manually.

  View update history to know which update is not installing.

  (a) open Windows Update by clicking Start , all programsand then click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

  Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually.

  http://www.Microsoft.com/downloads/en/default.aspx

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pop 0xC004E002 error code for the Windows Activation when to start my laptop

  Today, October 21, 2011 morning I start my laptop when the window have problem to boot if I start in safe mode, and then restart. At this time, I got the error for the Activation of the code window is 0xC004E002. Discription of the error is "the software licensing service reported that the license store contains inconsistent date".

  Please advice how I can fix this error.

  Thanking you

  Kind regards

  Mess Unagar

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  That said, it seems that the license store is corrupt - so, try the following.

  (1) open an Internet Explorer window.
  (2) type: %windir%\system32 in the browser's address bar.
  (3) find the CMD.exe file
  (4) make a right click on CMD.exe and select "Run as Administrator"
  (5) type: net stop slsvc (it may ask you if you're sure, select Yes)
  (6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing
  (7) type: Rename tokens.bar tokens.dat
  (8) type: cd %windir%\system32
  (9) type: net start slsvc
  (10) type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)
  (11) restart your computer twice.
  (12) you may need to enter you product key and activate it.

• I deleted from the temporary folder and now my microphone and camera do not work, the audio and the video hangs when activated

  C:\Users\John\AppData\Local\Temp and emptied, had like 20 GB of misc * in there, when I deleted it no error came, nothing has been locked. then when I didn't try to use my webcam (creative Webcam live pro v280) the audio and the video freezes as if taken in too much data to be processed during recording, and when I try to speak, it comes out as a big sound introduction text that's noise and videos recorded is accelerated as a 10 x. I bought a new webcam installed and everything went well, and exactly the same thing happened. (microsoft livecam this time) no sound. Anyone have any ideas?

  Hi Johnny,.

  Perform the System Restore to an earlier date and check if it helps.

  System restore

  System Restore can return programs and system files from your PC to a time when everything was working well. This will not affect your documents, images or other data.

  Hope this information helps.

• Why make the audio for the whole sequence when you export only a small section?

  If I export only a small part of my calendar, why the first emphasizes the provision of audio for the entire timeline?

  Normally this wouldn't be a problem, except that my timeline has tons of audio on it and the window "made necessary Audio Files" may take 5-10 minutes.

  Here is the link Jim referred to as:

  Feature request/Bug Report Form

• Multi-track audio out of sync after you import elements of first

  I use - Adobe first Elements 10, Windows OS7

  I have two video files to MKV quality that I converted to VOB and MP4. I saw three formats on two different players. All right.

  When I import the MP4s or the VOBs first elements the audio goes out of sync. I did this several times, as a new project every time. I moved, renamed and re-converted MKV original. same thing happens every time.

  What can I do to keep the audio synchronized with the video?

  Please notify. Thank you.

  I would try to convert mkv to mp4 with brake hand (and it's free).

  Make sure that it is set to CONSTANT FRAMERATE.

• How adjust us the window size when you reply to a video of Hello?

  When you start a videoconference Hello, call system shows the video in a pop up window that can easily be resized. But the answering machine has the video in a tab and the size of the video seems to be fixed. How can we get the same effect on response on the system of appeal system?

  Don't you 'click' on the tab "and drag' below 'control tabstrip' to open it in a new window itself?

  https://support.Mozilla.org/en-us/KB/tabs-organize-websites-single-window#w_moving-a-tab-to-a-new-window

• black screen after the windows logo when I install my video card

  Leadtek WinFast GT 220 1024Mo DDR2 graphics card

  I compared the original image with my GT220 I bought, and me missing 1 capacitor... It's funny because it's probably the error of the factory. It only works with the drivers, if I install them it hundred boot windows7 (only win logo and black screen then)... And when I go to nvidia to scan my gpu it shows gt 330, HELP?

  I compared the original image with my GT220 I bought, and me missing 1 capacitor... It's funny because it's probably the error of the factory. It only works with the drivers, if I install them it hundred boot windows7 (only win logo and black screen then)... And when I go to nvidia to scan my gpu it shows gt 330, HELP?

  You say you have "defective" material and you want a software solution?

  Any material support - including the drivers and other software that may be necessary to enable a hardware component to operate fully in a given operating system - is the manufacturer of the equipment.  So if you have a problem with your nVidia GT220 video card - your first stop should be nVidia.

  • Assuming you have Windows 7 64 bit, the drivers you want to include.
  • Assuming you have Windows 7 32 bit, the drivers you want to include.

  -In addition, you are in the hands of nVidia.