Tecra 8100 - CPU max, DVD - ROM and BIOS update issues

Similar Questions

• Keyboard and BIOS update issue on Satellite L505-13V

  Hello, I have two problems with my laptop.

  First is related to the keyboard. It started a few days ago, the laptop has wound down due to low battery, when I turned on it again once, I received a bad operation of the keyboard.
  The main problem is that when I type for ex 4, it appears on-screen as r4, and so on for some other keys.
  I ' v wanted by web it may possibly be due to the BIOS. And decided to update to the current version.

  And here's the second problem:
  I downloaded the update to the bios from the toshiba site and tried to install it, but it stops on the last stage, something of the region.
  Could someone please help with questions?

  Hello

  > I got a malfunction of the keyboard.
  What message did you receive exactly? This message based on Windows or what exactly?
  Of course, it could be a malfunction of the keyboard but software as well. Way simpler to check this must connect an external keyboard.

  > I downloaded the update to the bios of the toshiba site and tried to install it, but it stops on the last stage, something of the region.
  Where did you download this patch exactly? This update specifically for Satellite L500-13V and PSLJ0E model series?

• My computer quit detect my dvd (DVD - rom and DVD - RW) drives

  My desktop computer: Dell Dimension 9200, Window Vista. two of my dvd - rom and very good dvd burner works last month until very recently, I noticed that it is detected in my computer... it does not find. I even check the auto detect in the BIOS and works still do not. I checked the cables and it is not loose anywhere. readers always open and close with the flashing green light... but that's all. What could be wrong with it? I have all of a sudden does not appear in my computer, even under management. Help please!

  
  

• DVD - rom and DVD - rw read previously written DVDs and CDs but will not read a blank cd or dvd in the drive

  Original title: Dvd rom problem

  Am running windows XP. DVD - rom and DVD - rw read previously written DVDs and CDs but will not read a blank cd or dvd in the drive. Any help out there?

  Hello

  1. When did you start to question?

  2. did you of recent changes on the system?

  3. you receive messages or error codes?

  You can check the following link and try to run the Fixit and check.

  Your CD or DVD drive cannot read or write media

• DVD ROM and DVD burner is no longer available

  I lost connection with my DVD ROM and burner.   They no longer appear with other devices under 'my computer' and when I look in Device Manager there is a yellow exclamation points next to these two devices.  What should I do to restore the connection or correct the error?   Any ideas why this happened in the first place? I am running windows XP service pack 2.  Thanks in advance.

  Hello

  Please try the instructions in the link below on this subject:

  http://support.Microsoft.com/kb/982116

• Error: Please start the previous version of windows then click on the DVD-ROM and click on setup.exe to install windows during the upgrade to Windows 7

  Original title: Windows problem of dimming.
  Problem: impossible to up grade windows vista to windows 7
  Error message (roughly): start the previous version of windows then click on the DVD-ROM and click on setup.exe to install windows.
  Description: actually I have windows 7 genuine DVD which can start the installer to start. but I can't find anyway to install windows 7. I tried what windows error msg says.
  Help.
                                        

  Hi laadpiyush,

  1. which version of Windows Vista is installed on the system?

  2. which edition of Windows 7 you are trying to upgrade?

  3 - is 32-bit or 64-bit?

  Step 1:

  You can first check the upgrade paths to perform an Update Installation of Windows 7.

  Links:

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Step 2:

  Before upgrading to windows 7, you can try the following steps and start the upgrade installation.

  A. back up all important data on the system.

  Run the Upgrade Advisor

  See the link to download and run the Upgrade Advisor:

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Software c. Security uninstall and reinstall after upgrade Installation.

  D. sign off all external devices connected (except keyboard and mouse) and start the installation.

  For more information on the Upgrade Installation, see the links:

  Installation and reinstallation of Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/6719ae72-7187-45CD-80f7-55e66f3ec686

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Engraver of DVD-Rom and CD/DVD not appearing is not after uninstalling nero buring rom 8.0 on vista SP1 system

  Hello

  I have a Dell Optiplex 755 desktop computer. Running Windows Vista Business SP1.

  yesterday I was looking for a good burning program so I went to Nero since I've used it before and I like it. I installed the trial software and used for a few hours, everything was fine. After that I uninstalled the software and when I rebooted my system the DVD-Rom and DVD burner I had installed had disappeared. I looked in the Device Manager and cd players are there but have a! next to them saying "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  anyone has a solution for this or what I can try to start back?

  Help, please

  
  

• can't see the Dvd rom after the Update window window 10 7

  can't see the DVD rom after the Update window 10 window 7.

  Hi Michael,

  Thanks for posting your query in Microsoft Community.

  We would be happy to help you with the problem you are facing today. I understand the difficulty that is the problem, and I suggest you follow the methods below:

   

  Method 1: Run the troubleshooter of material and check.

  Follow the steps to run the Troubleshooter:

  a. type Troubleshooting in the search bar and click on it.
  b. click hardware and sound.
  c. click on Windows Media Player DVD and follow the instructions.

  Method 2: Uninstall, reinstall the drivers CD/DVD.

  a. press the Windows key + X , and then click Device Manager

  b. expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.
  c. When you are prompted to confirm that you want to remove the device, click OK.
  d. restart the computer.
  e. After you restart the computer, the drivers will be installed automatically.

  Method 3: Download/install the driver CD-ROM/DVD-ROM from the computer manufacturer's support Web site.

  Visit the computer manufacturer's support Web site and install the latest driver CD-ROM/DVD-ROM and check.

  Hope it will be useful. Incase if you still have any other queries please respond with more details and we will be happy to help you.

• Configuration at the request of update Retriever to download only the drivers and BIOS update?

  I'm looking to automate the update of extractor and our organization doesn't want or need additional software such as SHAREit or WRITEit, just the drivers and BIOS update. Is it possible to retrieve only the BIOS and the driver for the repository updates?

  Thank you

  At one point AHA a little there, discovered that I can mark the drivers/software I want installed as test or hidden mode and ThinInstaller don't provide that updates available, which works very well for us.

  Thank you

• Tecra 8100 - CPU Upgrade

  Hello
  I have an old Tecra 8100. I've updated the 700 to 900 Mhz CPU. It works but the CPU is always set to 100 x 7 = 700 Mhz. I think this would work if I find a tool that can update the record DMI for the CPU. DMICFG can read the values but could not write them.
  Could someone tell my worms a solution?
  I think there is a Toshiba tool for this.

  THX
  SImon

  Hello

  AFAIK more CPU, 800 MHz which was delivered with the Tecra 8100. I think it's limit.
  I found other topics about changing the CPU on the Tecra 8100.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=7358&MessageID=25832
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=11138&MessageID=40246

  Maybe this help you: entered the BIOS using "Esc" + F1 during POST. Past processor speed of 'Low' to 'High' (used for recording of the battery).

• Tecra 8100 CPU gets too hot

  Well, some may remember my previous post about the fan activation in my Tecra 8100.

  This laptop came to me as a gift by a customer, because the screen didn't work. After some research, the problem was the internal cold cathode that was broken. Once replaced: Yes! a free book for me! It was a Pentium III 650 Mobile, with 64 MB of RAM and a 12 GB hard drive. I replaced all the components (which are now on sale, btw), and now has a Pentium III 850 Mobile, 512 MB of RAM and a 40 GB hard drive. Someone gave me a card PCMCIA of WiFi 11 Mbit/s, and now how it works with Windows XP Professional and updated Toshiba Utilities and drivers downloaded from Toshiba USA.

  What's the buzz? SpeedFan, Motherboard Monitor and other monitoring utilities reported temperatures up 72a? Aºc in the processor. I opened the computer laptop and put thermal paste instead of the sticker that has the heat sink. Temperature guard high and utilities Toshiba even with parameters ' cooling high performance "does not have the fan to cool the cpu...

  I hangs at all, but the business cards and pcmcia laptop have too hot even with the system works with any of the applications running. Lowering of the CPU clock or the ratio helps not at all.

  I think putting a fan somewhere extra to force air circulation and that cool the cpu, unless...

  ... Toshiba could develop a utility that allows you to directly control the fan speed. I don't know if the thermal management is hardware or software-driven. If it is a software-driven, it should be easy to create a utility that directly access the fan and temperature records. It would be MUCH better than simply let the computer decide when and how long to activate the fan.

  I'm sure that Toshiba engineers are busy with more important things which will not create the utility for us, so...

  .. What to check or do to cool the CPU at more appropriate values?

  Thank you all!

  Hello

  As in you previous announcement describes the Toshiba power saver controls the CPU and fan usage.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=12585
  This software works very well, and if you use the laptop as prescribed, you should not get all the problems and overheating problems.

  The problem is that you have changed all the devices and parts on you laptop. The new parts are effective, but produce more heat.
  On the laptop you can cool the CPU with a small fan, and if she goes out, it is necessary to decrease the performance of the processor.
  It is a simple fact. All these functions can be set with energy saver.
  In addition, it is very important that your cooling module is clear and free from dust and debris obstruct the work of fan.

  PS: Useful link about changing CPU:
  http://support.toshiba-tro.de/KB0/FAQ5300W5000XR01.htm

• Tecra 8100: Video-playing DVDs only with jerking / glisten under W2K

  I can't play a normal DVD on my Tecra 8100 (P3 600 MHz, 256 MB RAM, Windows 2000 with SP4)
  without convulsions. Already have try to copy the image of the DVD on the HARD drive and play directly from the
  HDD - same result. Therefore, it is NOT a problem with the DVD drive, may be a problem
  with the S3 S3 Savage/MX VGA-Cardinal display driver integrated V installed 5.12.1.7002.
  Tested with PowerDVD 6 and VLC media player. Any special DVD playback software for the
  8100 available? Please help, try several hours to solve this problem, already
  talk with toshiba customer service!

  Hello

  Well, the Tecra 8100 is not a high-performance notebook and maybe it is not generally possible to watch DVDs jerking-free s.

  But I think you should check several parameters before we abandon ;)
  In order to check if DMA and not PIO mode is available and updated on the IDE controllers.

  Check if you have installed the latest version of DirectX.
  You said that you are using the latest version of the graphics driver. Well perhaps you will check this site:
  http://www.S3graphics.com/en/resources/drivers/legacy/software_archive.jsp#id_290298drv

  Also check if the installation of some codex will help you:
  http://www.DivX-Digest.com/software/nimo_pack.html

  The Nimo Codec Pack is a nice collection

• Compaq dc7800: DC7800 CPu id and BIOS update probem

  Hello

  My first post here, I hope you get what I'm trying to say.

  Well, I have this old compaq dc7800 sff and I managed to level it's OS to Windows 10.

  And now, I would like to update its bios and CPU id, but I can't run those exe, I downloaded on the cd7800 support site.

  I know that these bios update programs and so forth are not published for Windows 10, but I thought that windows7 versions would work.

  But they did not.

  For some reason, I got the the messege that "software publisher has refused to run this program on this computer.

  While this mean?

  I can't run these programs even with administrator privileges, I get the same messages?

  Because of Windows 10? Or what?

  The reason why I came across this problem was that I tried to update the CPU of the Q6600 to Q9550 and I got the error of CPU - ID firmware.

  Hello:

  It is very easy to update the BIOS on a dc7800 without being under Windows.

  In the menu of the BIOS on the file tab, there is a rom flash system command.

  All you have to do is put the BIOS files on a USB stick formatted with the FAT32 file system.

  Rather than go though all the steps to get the BIOS files, I've zipped or less than joint under attachments.

  Unzip them and copy the content of the file of the folder (not the folder), for your USB flash drive.

  Plug the flash drive into your PC and restart it, tap the F10 key to access the bios, select the file menu and on this list will be a rom flash system command.

  What to choose, and the PC will 'see' the files on the flash drive.  Follow the instructions on the screen to Flash the BIOS.

  I have attached files to the latest revision of the BIOS (1.32 Rev. A (6 Dec 2011)).

  If you still get the microcode error after updated the BIOS with the latest version, let me know, because then update the firmware, and it is a much more complex process.

• CPU and BIOS update problem

  I have a M57P 6395 33 M system and some time ago I added an E8500 CPU, I thought it would work even if Lenovo not listed the E8200, E8400. I was a little disappointed and I still wonder WHY lenovo gets SO specific with CPU connection. I don't see why she accepts only 2 CPUs and no other?

  Well, I bit the bullet and found an E8400 to put in the machine. I added CPU, removed the MB battery and left out for a while then went back on the new shoe, set all the necessary info. The first part of the BIOS screen mentions that there lies an E8400 (as he did for the E8500) but when it goes through the boot process it is said AGAIN that the CPU code is not enough to recognize the E8400. I am now confused.

  When I updated the BIOS, I used the that I've been led to believe was the GOOD .54KT23AUS (through the windows), but I still get the error 0167. It would be better for me to put the back E8200, re run the BIOS update using a CD?

  and there is another update of BIOS listed for the M57P 2RKT64A, I wonder if it would be better? It is not for use on 6395 but, the FIRST thing listed for THIS update is an update of firmware of CPU.

  I know that this means not much to all the world and I hear people say 'why bother? ' but I would use the machine as I'm n ot offer a more recent machine as I am a pensioner.

  A little help please.

  Thanks a lot for the quick response. I tried Flash via the CD with the E8400 in and it would not allow me to do when he came up with the error of CPU to half way through. I have since updated the E8200 back and did the BIOS update through the CD. The machine seems to have taken the update of the better BIOS this time but, the E8400 still does not work

  As for the E8400 CPU, I have an Intel CPU program on the computer and deepening classified by it for the E8400 says it's A07? However, I can't find any info on it. I guess I either will set up with hitting the F2 key when I start with the E8400 inside or just keep the E8200.

  I finnd the info on these rather confusing processors. The Intel CPU app I have gives me different information from a site like CPU world. The TDP of the processors are 65W but the ONLY thing I see different is the deepening of the base. The E8200 is listed as C0, while the E8400/8500 are E0. Why who would have much effect on the use of the more major? You would have thought that Lenovo engineers could make the system accepts the E0 revision or what is Lenovo wants to sell a new machine?

  Like I said, it's a shame that Lenovo is so affected by these machines with tunnel vision. Well

• DVD-rom and dvd burner is no longer appear in "My Computer".

  Just recently, I improve my XPS 700/720 hybrid for Windows Vista Ultimate 64-bit. Everything has been great to work for the last 2 weeks, but my dvd burner - rom and dvd both leave suddenly appear in 'my computer', after that I tried recently to reinstall Roxio Creator MyDVD Combo THE. I checked the Device Manager and the two drives appear with a (!) icon next to them. Open the Properties tab gives me the following message:

  "A driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  The message is the same for both drives, and I can't understand a solution to this at all. I tried to uninstall devices, but when the computer detects, it reinstalls the drivers right and translates the same message. I don't know where to find new drivers for these drives (dvd - rom Philips DRO6316, dvd burner is TSSTCorp DVD +-RW TS - H553A.

  Any help would be greatly appreciated. Thank you.