"Multiline: true ' does not not with StaticText

Similar Questions

• immediate = "true" does not work in 12.1,3-jdev

  Hello.

  I'm on Jdev 12.1.3 running on Linux 64 bit box.

  For some reason any ignore validation (immediate = true) does not work.

  I created the VO and droped to the page.

  Droped as createInsert button.

  When I click on it immediately that I required attributed error to the columns in my table.

  If I put autoSubmit false, I get this error. But I need to submit the part request, because another of the elements of the page are dependent on this button.

  Bug? Suggestions?

  It will work if you set changeEventPolicy = 'none' on your iterator?

  Dario

• closeDoc (true) does not

  Hello

  I used

  var myDoc = this;

  myDoc.closeDoc (true);

  It works in Adobe reader, but it does not work with Foxit Reader, although some other Scripts Adobe work with Foxit Reader. Any advise why closeDoc does not work with other readers like Foxit Reader PDF?

  Thank you

  Foxit does support everything that fact to the reader. If you want to know why, to ask in the forum of Foxit.

• I just spent an hour to compose a response in a thread ("Firefox does not with paypal"), only to see "You do not have permission" to submit - total loss!

  I was connected to respond in the thread "Firefox does not work with paypal. I spent the best part of an hour carefully compose this response, case tests, links, etc... [Tip: Firefox, unlike other browsers, has a problem with the server paypalobjects.comscripts.] Because I had taken so long to write the answer, she seemed to be a good idea to check in via the Preview button, but I received a message that the service was not available. Of course, I decided to submit it anyway, but when I hit 'submit' I got a message "you don't have permission...". "- at which point I (stupidly) on another page with this message, and what I wrote was gone!

  Anyway, it is definitely not normal that the site log out after only an hour. Sorry to hear about this. Maybe there was a little problem on the server with your session. If it is reproducible, I wonder if you have any software that could be quietly elimination of cookies for the inactive sites?

• still, mail. Identity.default.suppress_signature_separator set to True does not work, is their a new patch?

  I still have the '-' applied above the signature even after applying the fix to mail.identity.default.suppress_signature_separator that is set to true. Have tried running Thunderbird in safe mode, always have the same question. Have restart the computer several times, always have the same question. Reading a lot of messages on it, but don't say that it does not work even after you apply the hotfix does not. All of the suggestions. Pure install any extensions or add-in.
  User Agent Mozilla/5.0 (Windows NT 6.1; rv:24.0) Gecko/20100101 Thunderbird/24.6.0

  The fixed. completely removed Thunderbird, user and folder programming created by thunderbird profiles. Deleted file folder in windows. Rebooted PC. Installed Thunderbird. Add an account. Went to change only the settings in the config to remove the signature separator. He then worked.

• Satellite Pro 2100 - works does not with 2 sticks of RAM

  Hi all

  I've been with sticks of 2 x 512 MB RAM from a reliable supplier that reassures me that this RAM is compatible with the SP2100 laptop.

  With the two sticks installed, as soon as the machine is running, I get no display and 5 beeps (1 long, a follow-up of 4 short beeps). Each stick of RAM work well individually, and I also tested slot A and b. Thus, the 2 sticks of RAM are working alone and work the two slots. It seems that this machine has a problem with 2 sticks of RAM.

  The ACPI BIOS is up to date (v1.40). I also tried the old 256 MB stick with one of the new sticks of 512 MB - same problem. I tried this as the supplier of memory mentioned this Toshiba may take only 1 GB maximum.

  Any ideas why two sticks of RAM does not work?

  Thanks in advance and amicably.

  James

  Hello

  You are right. The laptop must be able to manage memory 1024Mo. (2 x 512 MB)
  Due to your description, I think that both modules are compatible, but cannot play together.
  In my opinion, you should use two modules with the same specifications

  Try to use the modules recommended by Toshiba;
  PC2100 256 MB (PA3127U - 1 M 25)
  PC2100 512 MB (PA3164U - 1 M 51)

• I have a MBP Late 2013 will pair does not with 6s on Blutooth

  Read all comments (lots of old stuff on these communities) and tried all the suggestions of trashing the plist etc etc. Still unable to get my iPhone 6s to pair with my MBP end 2013.

  For a fleeting moment after that match it says connected not connected appears.

  AirDrop works, but my phone does not appear on the screen of the devices. If sending photos of the iPhone works well my avatar is not displayed as sender just my intials & where ever he gets the ints info not the name I use in my Contacts.

  Someone at - it any idea what is happening. This worked OK until recently.

  An iPhone will pair not via Bluetooth to a computer (Mac or Windows) with the exception of hotspot and then only if your cell phone plan he supports. See below for more information. https://discussions.Apple.com/docs/doc-7722

  If you try to use the procedure of transfer/continuity or AirDrop, which does not have Bluetooth but devices don't are NOT matched. Bluetooth must be just on and the devices within range of the other. The following may help in problems of transfer/continuity: https://support.apple.com/en-us/HT204678

• BES10 - BDS WipeDeviceRequest organizationWipeOnly = true does not work

  I have a problem when performing the workspace only wipe via api BWS BES10-COMICS. Here's the call, please let me know if there are things seem out of place, thanks in advance. Type OffboardingType = new OffboardingType(); type. DELETE = true; SetDevicesWipeRequest wipeReq = new SetDevicesWipeRequest(); wipeReq.metadata = WSMetaDataWS; wipeReq.devices = new [] {device} Device; wipeReq.offboardingType = type; wipeReq.organizationWipeOnly = true; SetDevicesWipeResponse wipeRes = (wipeReq) BwsService.setDevicesWipe;

  Hey Garrett,

  I found the problem, it's because the ForceDeleteDevice flag is also set to true, the ForceDeleteDevice have priority and remove the unit from the user wherever the wip does not work.

  Thanks for the help though.

• Active state with menu manual not working does not with child pages

  I created a horizontal menu manual on my master page with two links (at WORK and about me). I did them manually as it was the only way I could work out how the style and the menu items to distance as I wanted. I created an active state that works for the main page WORK and the about me page.

  However, I have four child pages under the work, but when you click on one of them that the active State for labor (a green line under work) does not appear. When I return to the menu options to try to "solve" the problem and choose "All pages" all child pages appear in the main menu I want and does not solve the problem. I chose manual that I could put the line to show that under the term of WORK and not all field.

  Here is my Web site to demonstrate the problem: www.robertgreens.com

  Any help to fix this would be appreciated with gratitude!

  I managed to solve this problem (with the help of Live Chat Support). I needed to create an autour work and provide a 'normal' State which resembled the active state, so when you click on the pages of the child, it looked like work page parent menu (with a green line) below. This meant that I had to duplicate master page and do the same (deletion of the green line in the menu of work) for the words Me page. And now, everything looks the same: www.robertgreens.com

• Audio fun does not with animation

  I think it must have something to do with the audio being does not correctly placed on the timeline, but I think I do everything that the directions said. When I put audio in the timeline, it will play the audio from the beginning, but if I stop the audio and try to play a place randomly in the Middle, it won't play anything. How can I fix so the audio will play anywhere in the animation, not only at the beginning?

  If you publish a swf file, use stream to sync the sound, no event property.

• JDBC connection does not with ORA-12514

  Hi all

  I also have problems with the connection to the DB CARS because the listener does not recognize the name of the service. I read many messages from the forum itself here and elsewhere and I just can't understand it. Everything seems in order, so I'm a little confused as to why it does not work.

  Thus, some specifications: I actually use SAP as advanced application to connect to the DB.

  DB is RAC 11203, two nodes.

  OS: Linux RH6

  Headphones and remote headphones are a race to the top.

  JDBC connection string fails:

  JDBC:Oracle:Thin:@(Description=(Address=(Protocol=TCP)(Host=virtualhost1)(port=1527))(Address=(Protocol=TCP)(Host=virtualhost2)(port=1527)) (CONNECT_DATA = (SERVICE_NAME = MYSERVICENAME. «"" WORLD)))»»»

  I check that the service is available in the cluster:

  ORA. < dbname >. myServiceName.svc online on physicalhostname1

  When I check the status of the listener on node1 he mentions the MYSERVICENAME downstairs so it's here

  [oracle@physicalhost1 bin] $ lsnrctl serv < DBNAME >. WORLD

  LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 2013-SEP-07 16:43:11

  Copyright (c) 1991, 2011, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (SDU = 32768) (ADDRESS = (= SAP COMMUNITY. (World) (Protocol = TCP (port = 1527))(Host=virtualhost1)) (LOAD_BALANCE = OFF)(Failover=on) (CONNECT_DATA = (GLOBAL_NAME = < DBNAME >. WORLD) (SERVICE_NAME = < DBNAME >. «"" WORLD)))»»»
  Summary of services...
  Service '< DBNAME >' has 1 instance (s).
  Instance ' < DBNAME > 001 ", State LOAN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0 status: ready
  LOCAL SERVER
  Service ' < DBNAME > 001 "has 2 occurrences.
  Instance ' < DBNAME > 001 ', status UNKNOWN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0
  LOCAL SERVER
  Instance ' < DBNAME > 001 ", State LOAN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0 status: ready
  LOCAL SERVER
  Service ' < DBNAME > 002 "a 2 occurrences.
  Instance ' < DBNAME > 001 ", State LOAN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0 status: ready
  LOCAL SERVER
  Instance ' < DBNAME > 002 ", status UNKNOWN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0
  LOCAL SERVER
  Service "MYSERVICENAME" has 1 instance (s).
  Instance ' < DBNAME > 001 ", State LOAN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0 status: ready
  LOCAL SERVER
  The command completed successfully

  When I check the node database in sqlplus

  SQL > show the service_name parameter

  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  service name string < DBNAME > 002, < DBNAME > 001, < DBNAME >, myservicename

  That's where. The database is running.

  I am spent days on this and I am unable to understand. I tried to re - register the name of service to SIR with lowercase, uppercase. In fact, when I joined the service I used capital letters, do not know why crsstat it shows always lowercase. Also in sqlplus I see lowercase. I do know that if it's case sensitive at all, but shows the despair that I really tried everything. I think that the fact that I am using SAP is not serious as long as any application - what is uses the thin JDBC connection string.

  Help, please.

  Your JDBC connection string requires a service MYSERVICENAME. WORLD, it should be MYSERVICENAME.

• Solution for "Spooler service does not" with printers HP F4480 all-in-one.

  If you receive the prompt that says: "cannot install or print due to 'queue service does not work', here is a simple solution.»

  GO to the start menu and click on 'run '.

  Type CMD, and then click OK

  Type in the box that appears, "net start spooler" and click ENTER.

  NOTE: Without quotes and spaces between net start spooler.

  The box invites you... spooler is now in service.  The printer should now work correctly.

  Great information.

• Distributed form works does not with hotmail or gmail

  Sorry, if this is in the wrong place, but desperate to find an answer. (This form is about to circulate among a few hundred grade 12 students, who will have a wide range of messaging options.  We have students do not have difficulties to send this form)

  I have a form, distributed, sent people to fill out the form (test first) and submit.  Which I will collect in the entering e-mail response file.

  
  Some fill out the form, send, he calls the window to use gmail, hotmail or office.  They select Office/outlook sends exactly according to the needs. Excellent.
  
  But from time to time, it does not yet give the possibility for the Office or hotmail, it automatically changes to outlook.  Which I think would be OK, if the student is on their home computer and want to send it like that. (but eventually will be their parents email)

  For those who are informed on a school computer and want to use hotmail/gmail.  several problems occur...
  Once they choose the choice of hotmail/gmail, the process does not continue.  Everything seems to disappear, and the form is never received by the expected collector. Never turns in the gmail/hotmail sent file.
  
  One person said, they thought that it went through the process... but the collector never received.
  
  One person said, it doesn't give them the choice... it automatically opens outlook, even if they would have used hotmail instead.
  

  I suspect that most of the students would use a hotmail/gmail account to send the form.

  It's the form, we have created, http://www.SD22.BC.ca/forms/Scholarship_Application_Final_distributed.PDF  

  If it helps to understand what is happening... appreciate anyone taking a peek, even try to present.  Just write on her test, so that we know.

  We are trying to get this ready for the end of February.

  Perhaps recognizing the help... This should be posted on another forum as well. ?

  Total egg on my face.  The people who described the problem for me, left aside the fact that they did not actually read the pop up window that came when they hit the submit button.

  This explains, so why no one really had an answer for me.  The popup window, when you choose 'internet' option indicates clearly that we must save, then fix on the mail program they choose.

  My apologies, there...

  But he did raise the small problem, if someone check marking the 'don't show this'... could cause problems.

• findDeviceforUser() API with loadServiceAttributes = true does not not for some models BES

  In our application, we use the API findDeviceforUser() with loadServiceAttributes = true. This is necessary to interrogate some device related information of BES.

  However, for some devices (especially for BlackBerry 9000) models, we get the following exception:

  "Invalid character exception" and a response of

  3DES, AES-256, 0 x?

  The character of error? corresponds to a (BEL) control character

  Can someone help me please how to fix this. This is a known bug. Are there patches known for this?

  It seems that there is a problem with your BES/BOTTOM configuration. The only values that should be listed for the encryption algorithms are 3DES and AES - 256. '0 x' should not be registered. This value is unexpected, which explains why the BAA is throwing the exception, once this is resolved your application should work with these users.

  I would say to indulge in the BES forum boards or to create a ticket with server support teams to help get this resolved.

• sdi1.setDisclosed (true) does not properly

  Hi all
  
  I use Jdev 11 g.
  
  I created a page with a table and two tabs.
  When a new row is selected in the table tab1 should be displayed if tab2 was selected...
  
  I use this code:
  

      public void rowSelected(SelectionEvent selectionEvent) {
          resloveMethodExpression("#{bindings.DevPlanning1.collectionModel.makeCurrent}", null, new Class[] {SelectionEvent.class}, new Object[] {selectionEvent});     
          
          sdi1.setDisclosed(true);
          AdfFacesContext.getCurrentInstance().addPartialTarget(sdi1);
          sdi2.setDisclosed(false);
          AdfFacesContext.getCurrentInstance().addPartialTarget(sdi2);
      }

  What I do is open the tab 2, that works.
  Then, I select a new line.
  Then 1 tab is open, but it is empty: S.
  
  What's not?

  Hello

  You not add to partialTargets the right pane, the Panel is what should be re-posted, try the following:

  public void rowSelected(SelectionEvent selectionEvent)
  {
      resloveMethodExpression("#{bindings.DevPlanning1.collectionModel.makeCurrent}", null, new Class[] {SelectionEvent.class}, new Object[] {selectionEvent});
  
      sdi1.setDisclosed(true);
      sdi2.setDisclosed(false);
  
      RequestContext.getCurrentInstance().addPartialTarget(sdi1.getParent()); // could binf the panelTabbed as well
  }
  

  In addition, I don't know too much why you need expression method code.

  Finally, what is in the first tab? a region?

  Kind regards

  ~ Simon

  Published by: Simon Lessard on February 16, 2010 07:59