JDBC connection does not with ORA-12514

Similar Questions

• Form master-detail recording detail does not with ORA-20001

  Hello
  
  I have a master/detail form, the detail record has a timestamp field that I people using systimestamp via the default, it is a single field of view and everthing records very well. But if I change the format of the timestamp field via the DD-MON-YY HH24 attrubutes column, I get the following error on save
  
  Internal error in the routine mru: ORA-20001: error in MRU: line = 1, ORA-20001: find the invalid timestamp value, please check the timestamp format.
  
  Someone knows what's goin?
  
  Thank you...

  Looks like your display only column is based on the database column.
  If this is the case, you have little control for it in ApplyMRU.
  What you need to do is
  a. keep the TimeStamp column hidden with any mask format
  b. Add the form as a table with the format mask you want to display a column of data not

  In a Word, the DB column is in the proper format as required by the ApplyMRU but you display for users of the truncated version of that.

  See you soon,.

• Socket connection does not work with SIM network

  Hi all

  I created a socket connection. It works fine when I use the WiFi and iam able to download the data and get a correct answer successfully.   But when I use the network GPRS/SIM I get "Unauthorized response" as an answer. I already check with the default blackberry, here internet browser works very well.

  Can someone tell me why socket connection does not work when I use the SIM card network.

  If anyone knows about internal or the following BlackBerry setting that also tell me

  "Option-> advanced-> TCP Option.

  Thank you

  Neeraj Chauhan

  Thanks Peter,.

  For your support... Now my application works very well in both cases (SIM and Wi - Fi network). So I close my ticket.

  Thank you & best regards

  Neeraj Chauhan

• Satellite C70-B-306 - local network connection does not work

  Hello

  I have a problem with my internet connection, Wi - Fi works fine but when I put the cable with connector rj45 of the connection does not work.
  I see that my laptop want to connect but then the connection is lost again en it says cable is not connected. Who goes on and out.

  It passes between the cable and internet Wi - Fi connection. The cable worked fine on my desktop.
  What can I do? I have the laptop 1 week.

  René

  Hello

  What model of laptop do you have? Do you use the laptop with the original operating system preinstalled?

  Open Device Manager and check if the LAN CSA is listed and enabled correctly.

• Excite PRO 3G connection does not work after last update Android v4.3

  Hello

  I live in Italy and last Sunday (26 January) my excited PRO Tablet (model AT10LE - A - 10 H) received version Android 4.3.201121220.35.

  After restart my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

  My sim card is ok. I used this sim card before the system update and I don't have a problem with Android 4.2.2.

  Please help me.
  Thank you

  > After reboot my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

  Go to mobile network settings and search again for the 3G network.
  I had a similar problem with my Android Smartphone and my o2 provider
  I started to search for new, so I chose the O2 again and then I could solve the problem.

  In the case where this does not work for you, recommend you to reset the default Tablet (factory settings)

• P850 satellite and a WiFi - internet connection does not work well

  Hello

  My internet connection does not work with a Wi - Fi connection.
  I have laptop Satellite P850-131, which I bought a few months ago and I noticed that over the past two months the internet connection does not work well. When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

  I tried to do all the regular search but nothing works. Sometimes the message I get told that there is a problem with the DNS and other times with the IP address. However, with other computers I didn't have any problem at all to connect to the same Wi-Fis.

  All solutions?

  > When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

  If such a problem would appear again start the console (window BACK in typing CMS in search)
  Here, use the command * ipconfig / renew *.

• Network connection does not work after reinstalling Windows XP.

  Original title: problems with reinstalling XP.

  I had re format and re install windows xp but now my network connection does not work.  I have no IP address, even if my router and the pc are on DHCP. Device Manager tells me that the controller Ethrnet on the motherboard has no drivers, but I can't find a driver.  Any thoughts appreciated.

  Hi John Fisher_888,.

  You can download & install the drivers for the adapter from this link & check if it helps

  http://support.Dell.com/support/downloads/devices.aspx?c=us&l=en&s=Gen&SystemID=DIM_PNT_P4_8400&OS=WW1&OSL=en

  Hope the helps of information.
  Please post back and we do know.

• Unable to connect to a dial-up connection does not require a user id and password.

  It's kind of a weird question.  I have a new vista machine, and a user must always connect to a Government to start the connection via modem.  In XP, we used hyperterminal and everything worked well.  As hyperterminal is not available under Vista, we spent some time trying to get the vista switched from work.  He composed, negotiates, but when it comes to 'verification of the user name and password' connection failed after that right.  He has not set password to connect, the password entered only after you connect and you select the option to connect.

  Now, I copied Hyperterminal from a XP machine and was able to connect.  But using hyperterminal, none of the shortcuts that I do can be used.  They all come with "could not read session file: c:\. "c:\session.ht".ht."  I changed the location of the shortcut, the location of the hypertrm.exe, departure to the target location, etc...  The only way to get a recorded session to run is to open hyperterminal, and then click file, open and point to the location of the session.ht file.  It works, I suppose, but its not just a lot more, especially since this is not until the last the default location that you opened a file from.

  Ideally, I would like to use the connection to start menu.  Is it possible to force the connection does not send a user name and password?  He always says "verifying username and password" even though I left the empty boxes.  Or is this another problem with Vista and dial upward?  Any help would be greatly appreciated.

  Thank you.

  I thought about it... a bit, I've found a workaround.

  You can call hyperterminal for the prompt, using:
  Hypertrm c:\myfile.ht

  You open hyperterminal as we are used to having open when you click the .ht file in XP.

  Knowing this, you can create a shortcut to hyperterminal which calls the hypertrm.exe AND the .ht file

  Mine is:
  C:\Windows\System32\hypertrm.exe c:\Windows\System32\ohip.ht

  Bloody Government and their former systems eh?

  I hope this helps!

  Dave

• my remote desktop connection does not show the three options under DESK remotely

  my remote desktop connection does not show the three options under DESK remotely

  like that: -.

  Allow the connection of computers running any version of remote desktop
  or
  That allow the connection of computers running Office remotely with authentication NLA

  Are you sure your market Win 7 Ultimate or Pro? If your running Win 7 Home Premium, you cannot use Remote Desktop host/server mode and you will not have these options.

  Go in Start > run and type winver at the prompt to find out what version of your race.

  If you are running Win 7 Home Premium or Starter watch TeamViewer as an alternative.

  http://www.TeamViewer.com

• Why my wifi connection does not work correctly?

  I had problems with my computer for a while. The first problem I had was that after I hibernated my computer it would be even not show me internet connections. I discovered that the hibernation of the computer can sometimes cause this problem. A little later that I realized that even when the computer had not been put into hibernation for weeks sometimes started upward with the same problem. He said networks is not available and there is a red cross on a box where my wifi bars should be. I had to reboot my computer up to 5 times to get the bars will appear. When he did not connect to all pilots and equipment I need to connect does not even appear in the control panel. The other times where it worked the drivers were all there. I don't know yet how this can happen. The other computers in my home connect very well and are able to interact with each other at high speed and get internet just fine.

  Recently, I lost any connection even when I rebooted my computer 10 times it doesn't.

  I came across a thread that told me to access prompt as administrator and type in this

  netish int ip reset

  I was able to connect to my network now, but he says no access to the network or Internet. I also tried typing in this...

  ipconfig/flushdns

  now I can access the internet and communicate with other computers. I tried to play Minecraft while my friend was the host through the router, but the connection was so slow that it was as if I was looking at the past in slow motion. I crossed several times and abandoned. The internet is too slow. It's like I'm on dial upward, but it should be high speed, I don't know what the problem is. What else I can watch on my computer to help me solve this problem? Should I restore it to factory settings? Or is something broken?

  Hi Veronica,.

  Thanks for the reply.

  Sorry to hear about the inconvenience caused.

  According to my understanding, you are having trouble with internet connectivity.

  You upgrade windows or what was the first operating system installed on the computer?

  This problem is mainly due to drivers get damaged.

  To rectify the problem, you will need to uninstall the current network using Device Manager drivers and install the latest drivers from the computer manufacturer site.

  Please refer to this sub article, which will guide you to uninstall the drivers using the Device Manager:

  https://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553572%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  To download the latest drivers from the computer manufacturer site, see the link below:

  http://www.ASUS.com/in/supportonly/U56E/HelpDesk_Download/

  Hope this information helps, for assistance please answer.

• Satellite A200-1js: local network connection does not appear

  Hey people

  I have windows xp sp3 in my Satellite A200-1js but my Ethernet connection does not shut... and I saw this in my network connections:
  

  And in my etiquette system shows this:
  

  I installed the correct drivers

  Everyone knows what is happening?

  Thnkx

  Satellite A200-1js belongs to the PSAE6E series.
  Just a few questions:

  You would update you BIOS to the version of Win XP?
  If it isn't-> do this!

  Have you tried reinstalling the driver Realtek LAN 5.664.205.2007 from the Toshiba page?
  If it isn't-> do this!

• DB stopped working with ORA-12514: TNS:listener is not currently of service requested in connect descriptor

  Hello

  I installed Oracle 4 months before and work perfectly fine on until now. I could not able to connect to any DB or URL http://127.0.0.1:8080/apex/f? p = 4950

  The connection failed with the below error

  ORA-12514: TNS:listener is not currently of service requested in connect descriptor

  Results of the LSNRCTL STATUS as below

  C:\oraclexe\app\oracle\product\11.2.0\server\network\ADMIN > LSNRCTL STATUS

  LSNRCTL for 64-bit Windows: Version 11.2.0.2.0 - Production on 3 January 2016 12:43

  : 55

  Copyright (c) 1991, 2014, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  TNSLSNR for Windows 64-bit version: Version 11.2.0.2.0 - Prod

  ction

  3 January 2016 start date 12:43:51

  Uptime 0 days 0 h 0 min 4S

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Default Service XE

  Listener parameter File C:\oraclexe\app\oracle\product\11.2.0\server\network\A

  DMIN\listener.ora

  Listener log file C:\oraclexe\app\oracle\diag\tnslsnr\RAJESHK-PANTAR\lis

  tener\alert\log. XML

  Summary of endpoints listening...

  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = localhost) (IN.

  RT = 1521)))

  Summary of services...

  Service 'CLRExtProc' has 1 instance (s).

  Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...

  Service 'PLSExtProc' has 1 instance (s).

  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...

  The command completed successfully

  C:\oraclexe\app\oracle\product\11.2.0\server\network\ADMIN > LSNRCTL SERVICE

  LSNRCTL for 64-bit Windows: Version 11.2.0.2.0 - Production on 3 January 2016 13:0

  : 08

  Copyright (c) 1991, 2014, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1)))

  Summary of services...

  Service 'CLRExtProc' has 1 instance (s).

  Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...

  Managers:

  "DEDICATED" set up: 0 denied: 0

  LOCAL SERVER

  Service 'PLSExtProc' has 1 instance (s).

  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...

  Managers:

  "DEDICATED" set up: 0 denied: 0

  LOCAL SERVER

  The command completed successfully

  Please help with what deliver you.

  1. control file backup to trace using the "alter database backup controlfile to trace as 'C:\control.bkp ';

  2. turn off your database

  3 startup nomount

  4. create controlfile from the backup created controlfile command. For example. See below (it is extracted from the trace my database controlfile. RESETLOGS option use as in 1st line

  CREATE CONTROLFILE REUSE DATABASE "WIN1DB" RESETLOGS  NOARCHIVELOG
      MAXLOGFILES 16
      MAXLOGMEMBERS 3
      MAXDATAFILES 100
      MAXINSTANCES 8
      MAXLOGHISTORY 292
  LOGFILE
    GROUP 1 'C:\ORACLE\PRODUCT\ORADATA\WIN1DB\WIN1DB\REDO01.LOG'  SIZE 50M BLOCKSIZE 512,
    GROUP 2 'C:\ORACLE\PRODUCT\ORADATA\WIN1DB\WIN1DB\REDO02.LOG'  SIZE 50M BLOCKSIZE 512,
    GROUP 3 'C:\ORACLE\PRODUCT\ORADATA\WIN1DB\WIN1DB\REDO03.LOG'  SIZE 50M BLOCKSIZE 512
  -- STANDBY LOGFILE
  DATAFILE
    'C:\ORACLE\PRODUCT\ORADATA\WIN1DB\WIN1DB\SYSTEM01.DBF',
    'C:\ORACLE\PRODUCT\ORADATA\WIN1DB\WIN1DB\SYSAUX01.DBF',
    'C:\ORACLE\PRODUCT\ORADATA\WIN1DB\WIN1DB\UNDOTBS01.DBF',
    'C:\ORACLE\PRODUCT\ORADATA\WIN1DB\WIN1DB\USERS01.DBF',
    'C:\ORACLE\PRODUCT\ORADATA\WIN1DB\WIN1DB\EXAMPLE01.DBF'
  CHARACTER SET WE8MSWIN1252
  ;
  

  5 mount the database 'edit the editing of the database'

  6 open the database using newspapers to reset "alter database open resetlogs.

  Thank you!

• Why my laptop with bluetooth connected does not pick up the bluetooth on my laptop

  Windows does not detect the bluetooth on my desire to hdc, someone help

  Hi alia 45

  Make sure that Windows is configured to accept incoming Bluetooth connections.

  Step 1
  You can check the compatible devices Bluetooth configuration panel. Here's how:

  1. Click theStart button, select Control Panel , click hardware and sound , and then click Bluetooth devices .
  2. Click theOptions tab, select the allow the devices to connect to this computer check box, and then clickOK .

  If this step does not help, try the next step.

  Step 2

  Remove and then reinstall the device:

  1. click the Start button, select Control Panel , click hardware and sound and then clickBluetooth devices .

  2 Select the device that is not working, and then clickRemove .

  3. click on Add , press the reset button on the unit (or make it discoverable following the manufacturer's instructions), check the boxmy device is set up and ready to be found and then clickNext .

  4. If the device is not found, repeat the previous step. When the device is found, select it, and then clickNext .

  5. follow the remaining instructions in the wizard.

  ·        Make sure that the device is on and that the batteries should be replaced.

  ·        Make sure the Bluetooth adapter for your computer is turned on and that the device is in use and detectable. If you don't know how to turn on discoverability, read the instructions provided with the device or check the manufacturer's Web site.

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Nelex.

• Why adobe watermark connection does not work with Windows 10?

  I have install Windows 10 in my computer and now does not have the watermark of buffering! My photoshop is CS5...

  anyone has any ideas to solve the problem?

  Sorry for my English

  Sonia

  Have you tried a reset of the watermark Panel preferences?

  

  Have you tried to reinstall the watermark Panel?

• Application of computer Virtual Image precompiled App development database: start of the CBD fails with ORA-12514

  Hello

  I have a few questions about the pre built Database App Development VM image.

  I am trying to use it to familiarize myself with Oracle 12 c and would like to receive feedback on the following points:

  1. When you open a terminal session and then trying to connect as the sysdba, it automatically connects me to the ORCL PDB. How does this happen? I have just a sqlplus/nolog followed normal con sys/oracle as a sysdba. My ORACLE_SID is set to cdb1. Thank you I can change session at the root, etc. - my query is how by default does me to the ORCL PDB?
  2. If I connect to the container root of the CBD, namely sqlplus sys/oralce@cdb1 and then issue an immediate halt, the CBD closes down, but in the process gives an ORA-12514 error - after that I am unable to start CDB, as shows the ORA-12514 error when I try to sys/oracle@cdb1 conn - TNS:Listener is not currently of service requested in connect appears.

  For directions to the two above would be appreciated.

  Thank you, Mohan

  All,

  Well, I have fixed it for myself.

  TWO_TASK env var has been ORCL beforehand to be close the CDB.

  Disabling then close the container and restarting it fixed my error ORA-12514.

  Kind regards

  Mohan