Multimedia card is secured by another device. Unable to save the encrypted file

Similar Questions

• Unable to save the host file on Windows 7 error that access is denied.

  Original title: cannot save the hosts file

  Windows 7: I want to add the new ip address for the server on the host, while adding its allowing me to save despite the UAC is lower and I am the administrator of the machine. I've run Notepad as administrator and navigate through the host file edit but during the recording of overwriting file access is denied. How can I get around that?
  64-bit Windows 7

  Hello
   
   
  Method 1:
  Try saving the file in safe mode with network.
  Reference:
  Start your computer in safe mode:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  
  Method 2: Temporarily disable the antivirus software and see if that helps.
  Reference:
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Unable to save the PDF file

  Hello.  I use LiveCycel designer TO create a PDF to fill several and save the PDF files to fill static forms on-line.  I use acrobat X pro to allow the extension of the detector so that users type in the data and save the form, however, the right pdf file cannot save the data entered, except the data entered in the first field.  What did I miss?

  Thank you

  On the first field, look at the object/link tab and see what the link is set to... something .prpably like use FieldName. Now let's look at another field that is not saved and see what his relationship is set on... I bet that it is set to None. If so change it to use FieldName.

  Paul

• Unable to save the exe. files and install downloaded software

  Whenever I try to download the software lately, it fails and says diagnostic tests c documents c\documents and documents\downloads\ (s-ware no matter what I try d-load) pc - install .exe could not be saved because you cannot change the contents of this folder. Change the properties of the folder and try again, or try saving in a different location. What should I do to fix this?

  Quick workaround: choose a different location to save the file, for example, your office.

  Diagnose:

  What version of Windows you have, including the service pack?  If you are unsure, do a click right my computer and select Properties.

  If there are problems in one of the following steps, report the complete text of the error message without paraphrase.

  • Open My Documents.
  • Double-click the download folder to open it.  Any problem?
  • Assuming that downloads folder opens, click file > New > text document.  Press enter
  • It must be a file named new document texte.txt in the downloads folder (you can not see the txt at the end, depending on your settings).  Was there a problem in the creation of this document?
  • Assuming that the file has been created, double-click it to open it.  Type a few characters.  Save and close the document.  All the problems?

• Unable to save the .pdf file in Adobe Reader 7

  I have download Adobe 7, but I can't change the default for adobe 6 .pdf extensions so that pdf open with adobe 7.

  Adobe 7 works well if I open it and I can read PDFs with it.

  Hello

  Check with Support Adobe and their Forums.

  Adobe - Support
  http://www.Adobe.com/support/

  Adobe - communities
  http://www.Adobe.com/communities/

  Adobe - Forums
  http://forums.Adobe.com/index.jspa

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Unable to save the PDF file to comment on

  Hello

  Today I wanted to save the PDF file (created by exporting from MS Word) as a Reader Extended PDF that allows you to comment on and I failed, I find myself with a message saying something like "you don't have permissions to write to a file. It's in Polish, so I'm not sure that this is a correct translation. In any case, it's something I've done for hundreds of files, in the same way. So I'm not sure what's going on? These files are not protected. I use the same account all the time.

  Thanks for the tips.

  

  Hi piotreba,

  Create a new user with all the privileges on your system account & then try to reproduce the problem.

  Kind regards

  Nicos

• Unable to save the modified file

  I am editing a file for the 2nd or third once and have added comments about 15 pages. When I try to close the file I asked "do you want to save changes to [filename] before closing? I click 'yes '. Then the window "Save as" appears, but it is empty. There is nowhere in it click or to move on.

  Other attempts to close the file cause the same thing. If I'm trying to close the application, the window "save under" is open, but there is nothing in it.

  How to go beyond that and save the changes I made in the file?

  Thank you.

  Hi orinkh,

  Try this solution:

  The default "Save as" dialog Acrobat DC is different from the dialogue box you had in earlier versions of Acrobat, it also allows you to record in the clouds and previous locations that you saved the files. It is possible that when Acrobat tries to connect to the 'cloud', it runs into problems. You can try to disable this feature to see if this brings your backup in the back of the box: open Acrobat Preferences, then go to the "General" category and uncheck "show the online storage when you save files:

  

  Kind regards

  Nicos

• Unable to save the pdf files downloaded from databases

  When I download PDFs of databases (e.g., SpringerLink) I can download to READ only (there is NO toolbar to print/economy/etc.). I am y access through a University Library which gives access. Y at - it a setting I need to change? OR some files are restricted to read-only? If so - how can I know which is the case before I download?

  It sort! Right-click on the gray toolbar & reset toolbars - click the "print" key reappears Phew!

• OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadr 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install updtyer Combi for OSX.

  OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadro 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install Combi updater for OS x, the problem persists.

  If I remember someone else reported the same problem yesterday and Nvidia suggested to reinstall OS x. If yo boot into Recovery and reinstall without formatting nothing should be lost but backup before just I case.

• Unable to save the files to my device (Flash disk)

  Unable to save the files in my flash drive. It is given the message that it is complete, although it is not even half full. Furthermore, when I tried to eject, there will be a message that I have shuold close all files using even when there is none.

  Thank you

  First of all, I would like to make a backup of all the files somewhere safe. Just in case something goes wrong. I would like to make a copy of the files on the computer. Format the USB. Then copy the files over. If after a format, it still has the same problem or she leaves you nothing copy on then the memory stick may be dying on you and her is to buy another.

  Good luck

  Free Support Tools

• Unable to open the zip file

  Music downloaded from Rhapsody to use on Windows Moviemaker. Unable to open the Zip file.

  Music downloaded from Rhapsody to use on Windows Moviemaker. Unable to open the Zip file.

  ==================================
  Open zip files is to open the folder and drag
  all of the content to another folder.

  And the following article might suddenly look:

  Windows Vista - compress and uncompress files (zip files)
  http://Windows.Microsoft.com/en-us/Windows-Vista/compress-and-uncompress-files-ZIP-files

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• R12 rapidwiz error on node2 - AC-00002: error: unable to create the log file

  Over multiple node R12 on Enterprise Linux 4 installation fees. below error is encountered on node2
  
  AC-00002: error: unable to create the log file
  The installation was successful on the database node and the main node of the Application. On the primary Application node only ' lot
  
  Treatment services are enabled.
  
  However, when installing on the application additional node the rapidwiz is errors
  
  "AC-00002: error: unable to create the log file - $INST_TOP/$CONTEXT_NAME/logs/12202114.log.
  Exception in thread "AWT-EventQueue-0" java.lang.RuntimeException: AC-00002: unable to create the log file.
  $INST_TOP/$CONTEXT_NAME/logs/12202114.log
  
  I tried to install several times but every time it failed with the same message
  
  I think that the reason for the failure:
  
  I am writing on a mounted NFS on Node2. If I access a NFS mount from one server other than of its origin, the root of the application server user is considered person not the user.
  I checked this by pressing a file being logged in as root:
  
  -rw - r - r - 1 person person 0 20 Dec 10:59 abc
  
  I mounted node2 successfully using
  Mount-t nfs nas1: / erparch /erparch
  
  Rapidwiz version is 12.0.0.20
  
  What are the steps to take in order to proceed with the installation on the second node.

  user10126380 wrote:
  I think that the reason for the failure:

  I am writing on a mounted NFS on Node2. If I access a NFS mount from one server other than of its origin, the root of the application server user is considered person not the user.
  I checked this by pressing a file being logged in as root:

  -rw - r - r - 1 person person 0 20 Dec 10:59 abc

  I think you've correctly identified the source of your problem. By default, the NFS mounts are usually created with the 'root_squash' option, where the user root on a remote system creates its files as the anonymous user ('nobody' in most cases) on the exported NFS volume. It is usually a good practical security; However, in your case, you need to export the NFS volume with no_root_squash to allow the user root on Node2 to create files as expected when you run RapidWiz. Once installation is complete, you should be able to go back to using the default root_squash option, as the following files in the filesystem level of demand will be created by non-root users.

  Your system administrators may not be happy with the idea of an export of no_root_squash, and I wouldn't blame them. :-) If there is dispute, make sure that they understand that it is only for the duration of the installation of the EBS, and she can (and should) be powered once the installation is complete and verified to work.

  These two articles offer a brief explanation of the purpose and value of the NFS mount root_squash/no_root_squash export options.

  Kind regards

  John P.
  http://only4left.jpiwowar.com

  Published by: jpiwowar on December 21, 2009 21:38

• Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  I REINSTALL 10 TIMES SO DON'T TELL ME THAT!
  I'm piss because I need firefox work again, so I can finish my reseaching in 5 days.

  
  

• Unable to save the 'Release Date' field in iTunes/Windows 12.4.0.119

  Unable to save the 'Release Date' field in iTunes/Windows 12.4.0.119

  I've just updated to 12.4.0.119 and can no longer add Release Date for a TV show.  When I go to "Get Info" and type the release Date, it allows me to enter a valid date, but as soon as I have the label off the field it emerges by itself.  If I enter the date and click on 'Ok', the date is not recorded.

  I had this same problem Windows 10. Just tested it on iTunes/Mac 12.4.0.119 - this platform will not yet you allow to select the release Date field to make an entry.

  It is a major issue, as AppleTV allow no sorting replacing television programs other than by Release Date.

• Unable to save the Page as that received the error "ga.js could not be saved, because the source file could not be read." Try again later or contact the server administrator.

  Unable to save the Page as that received the error "... ga.js could not be saved, because the impossible source file read try again later, or contact the server administrator.

  You have installed the Ghostery add-on or something similar?
  It can block Google analytic and .js file could not be read.