Publication date of blog is absent but the timestamp is there

Similar Questions

• The upper guide of purge is absent, but the right, the left and bottom bleed guides see the.

  In Illustrator CC 2015,.

  The upper guide of purge is absent, but the right, the left and bottom bleed guides see the. Why does this happen? My size is 40 "x 38" with 1"bleed. This has happened lately format that I work projects of large format... It is not a big worry, but I'm a bit OCD when something should be there.

  

  Even zoomed in, the guide still does not appear.

  

  Try to use the icon of the rocket in the command bar to disable GPU acceleration.

• Some iPhoto albums appear empty with no sticker and say '0' when I fly over the album, but the photos are there when I double click.

  To start, I read in countless discussions here on iPhoto glitches and patches, so I hope I'm not repeating this question, but I couldn't find the answer anywhere I had a question after question with iPhoto (mainly around several accidents after organizing photos into albums that made the album organization and this issue I describe below) and is considering moving to Adobe Bridge just to have a reliable place to store my photos without worrying about the constant pain. I realize that no program is immune to glitches, but the volume and the frequency that I've had with iPhoto is unmatched (which led me to wonder if it is just a user error, but I honestly can't understand for the life of me). So I describe my current number below, in the hope of resolving the issue so that either A. I can fix and give iPhoto a chance more or B can I ensure that my photos are safe and intact before transfer to another program.

  Some of my iPhoto albums appear empty with no sticker and say '0' when I fly over the album, but the photos are there when I open the album. I have rebuilt the thumbnails, and it has not solved the problem. After the other issues that I had with iPhoto crashes, I made sure that all updates have been installed. Unfortunately, I don't remember if I've rebuilt or repaired the database, but it seems that all my photos are present, all mixed together and some showing in the albums 'empty '. Here's my question: is one problem, other than being boring? And should I switch to another program, or have I missed something?

  A few details:

  • I have rebuilt thumbnails today and it took 5.5 hours. It seems completing without problem, but has not solved the problem.

  • I have my computer fully backed up on an external drive to Seagate drive as Mac OS extended (journaled) as well as iPhoto backed up separately on the drive as well.

  • Looks like I have a "library" and "alias."

  • I use iPhoto to organize my photos. I use Photoshop to edit. I love the feel of iPhoto, but I lost hours and hours trying to organize and solve problems.

  • I use iPhoto 11 version 9.4.3 OSX 10.8.5 / / MacBook Pro processor 2.9 GHz Intel Core i7 Memory 8 GB 1600 MHz DDR3

  More worrying is the issue of the repeated questions. How you use iPhoto and Photoshop together?

  Tabula Rasa:

  Download iPhoto Library Manager and use its function of reconstruction. (In early versions of the Library Manager, this is the file-> control Rebuild. In versions later it is under the menu library.)

  This will create a completely new library. It will then copy (or try) your photos and all associated metadata and versions to this library and as close as possible to what you had in the damaged library fix it. It does this based on the information it finds in the iPhoto sharing mechanism - but it means that things not shared won't be there, so no slide shows, books or calendars, for example - but it should recover all your events, albums and keywords, faces and places.

  Because this process creates a completely new library and does not change your old, it is non-destructive, and if you are not satisfied with the result, you can simply go back to your old.

• A friend gave me his iPad 5.1.1 iOS.  I plugged on my desktop to load (I have also 2 iPod Touch from my iTunes library), but the iPad indicates there is no SIMcard (?) and that it does not load.  That pasa?

  A friend gave me his iPad 5.1.1 iOS.  I plugged on my desktop to load (I have also 2 iPod Touch from my iTunes library), but the iPad indicates there is no SIMcard (?) and that it does not load.  That pasa?

  The iPad does not have a SIM card. Most are wifi only.  The USB jack on the side of a machine very likely does not provide enough current to recharge an iPad. Use the power supply provided 2.1 watts (if you have one - if it isn't get a).

• We get an error when I try to collect data from vCenter Server. But the Collection of Cluster works!

  Hello

  I m getting a strange errormessage when he tries to load my vCenter Server inventory.

  I have configured my vCenter Server as the endpoint server and I was able to load the Clusters. When I klick collection of data in a Cluster (Cluster of EQL 1) I can load all the data and the State is 'successful', but when I try to load the inventory FRO the vCenter Server (to get the models) im getting this error message:

  The treatment [inventory], error details error: illegal managed object reference type, folder.

  The same schows Agent logs:

  [26.08.2014 16:48:16] [Info]: start: treatment Workitem ID [2e38598e-4385-4b2d-bc88-fd2b773d1f98] [inventory]

  [26.08.2014 16:48:16] [Debug]: [[inventory]] [inventory] VirtualMachine.Admin.Hostname = vCenter

  [26.08.2014 16:48:16] [Debug]: [[inventory]] VirtualMachine.Admin.ParentIdentity = [inventory]

  [26.08.2014 16:48:16] [Debug]: [[inventory]] [inventory] VirtualMachine.ManagementEndpoint.Name = vCenter

  [26.08.2014 16:48:16] [Debug]: [[inventory]] VirtualMachine.ManagementEndpoint.Identity = [inventory]

  [26.08.2014 16:48:16] [Debug]: [[inventory]] [inventory] VirtualMachine.ManagementEndpoint.Endpoint0 = vCenter

  [26.08.2014 16:48:16] [Debug]: [[inventory]] [inventory] VirtualMachine.Admin.Name = inventory

  [26.08.2014 16:48:16] [Error]: <? XML version = "1.0" encoding = "utf-16"? >

  < Boolean > false < / Boolean >

  Error parsing [inventory], details of the error:

  System.ArgumentException: Illegal managed object reference type, folder.

  at DynamicOps.Vrm.Agent.vSphere.VSphereGetHostsRequest.ExecuteImpl)

  at DynamicOps.Vrm.Agent.vSphere.VSphereHypervisorServiceProvider.GetHosts (ManagementEndpoint managementEndpoint)

  to DynamicOps.Vrm.Agent.Collector'3.get_Hosts)

  to DynamicOps.Vrm.Agent.Collector'3.CollectManagementEndpoints)

  to DynamicOps.Vrm.Agent.CollectInventory'3.Collect)

  to DynamicOps.Vrm.Agent.BaseHypervisorAgent'3.EnumerateHypervisorResources (collector collector 3, WorkItem workItem, PropertyBagHelper propertyBagHelper)

  to DynamicOps.Vrm.Agent.BaseHypervisorAgent'3.ProcessWorkitem (WorkItem workItem, task of the chain, PropertyBagHelper propertyBag)

  to DynamicOps.Vrm.Agent.vSphere.VSphereAgentService.ProcessWorkitem (WorkItem workItem, task of the chain, PropertyBagHelper propertyBag)

  to DynamicOps.Vrm.Agent.BaseAgent.ProcessWorkitem (WorkItem workItem)

  I hope that someone had an idea, im out of ideas.

  THX Steven

  There is no data for the endpoint collection... And I'm not entirely sure of how you added the vCenter object it... y at - it a calculation object named "vCenter? To answer your specific questions about the models, however, they must be stored on a cluster that is part of the tissue group for data collection to pick them up... They are not considered as a global entity (as a resource calculation). Add models to one of the clusters and then to collect data on it, and you should be fine.

• I followed the instructions for "Go Thunderbird data to a new computer," but the calendar data has not been transferred and the calendar program does not work.

  I manually moved my profile of Thunderbird in Ubuntu 12.04 LTS to 8.1 Windows. I followed the instructions and everything settled as expected except the calendar. Not only the calendar data has not been transferred, the calendar itself does not, for example no dates & everyday of the week, etc., all the menus associated with the calendar are "grey," etc. I'd appreciate any help. TIA KellyJMorris

  Calendar (aka Lightning) contains binary components, which are dependent on OS. Thus, you should not remove the add-on lightning in your add-ons Manager and install the Windows version of lightning.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/lightning/

• HP Deskjet F380: No paperjam but the computer thinks there is a

  There is a paperjam that was erased.  But our computer continues to tell us that the printer is blocked when trying to print from our Dell.  We are able to copy with the printer and my son can print from his laptop so that we know, is not a paperjam.  How to fix this so we can print from our PC?

  Welcome to the community of HP, @Slap5!

  I will definitely do my best to help you with the paper jam error message you see on your computer. I ask that you please let me know some more useful information to help me the problem of the search for you. Also try one of these steps, you can not try and respond to me with the results please.

  1. Have you completed all the steps in this guide: a message "paper jam" for the HP Deskjet F300 all-in-one series
  2. What is the operating system of the computer?
  3. Did you test functionality of the hardware (made copies) and they work successfully?
  4. Have you tried printing from different programs?
  5. Have you tried uninstalling and reinstalling the software?
  6. If you are using Windows, run the print and Scan Doctor and understand the results.
  7. Is the printer plugged directly into the wall outlet (avoiding the power and surge bars)?
  8. Have you completed all the updates of Windows/Mac OS?
  9. Try a power reset the printer:

     With the printer, unplug the power cord at the back of the unit.

     Unplug the power cord from the wall outlet.

     Wait at least 15 seconds and plug the power cord into the wall outlet.

     Reconnect the power cord to the back of the unit.

     If the printer does not by itself, press the power button to turn it on.

  Click on the thumbs up below to show recognition for my help!
  Click on the 'accept as Solution' if I'm you guide to a solution!

  Thank you

• I bought lightroom-no valid serial but the installer says there is no valid product

  I bought lightroom 6 and I got insofar as enter my serial number and I get a message that the number is valid, but Setup cannot find a valid product on the computer. I already have lightroom 5

  I'm sorry. I found the serial number of my lightroom 5 and it took that.

  Thank you!

• 'RT Set date and time' does not define the UTC seconds

  Hallo,

  I tried to set the time on my cRio 9012 with the function settimeUTC which is used by the vi "the Date and time value. But the second I get home are ADDED to the current time and not defined as the new value.

  Even the vi illustrates this behavior: I've set up a vi time where in a loop (100ms delay) and reread. When I put in local time stop the clock (as expected), but when I put the UTC time the Dungeon seconds on the run...

  Can someone help me with this problem?

  Thank you

  Florian

  Hi Florian.

  After posting your version of LabVIEW, I found an answer to your question:

  The behavior you're seeing is a known bug that has been fixed in LabVIEW 8.5.1. Workaround is to use set local time instead.

  Let me know if you have any other questions.

• Problem desktop icons, blue and referring to an application used to be on the SD card, but is no longer there

  Hello
  I have this problem, my app box shows me two icons in blue, as the system icon, you know. These icons are the symbol of SD above. I click on them, and the message is that the app is not instaled. I made a return to the top and I formatted the SD card and made a SDMaid clean, to clear all the tracks off old apps but the icons still there and I don't know which app they belong
  Do you know a solution for this?
  Thank you

  I found the solution! This!

  If you still see these apps under settings-> Apps, try to uninstall them from there and see if that helps.

  If you do not, go to settings-> Apps-> all-> House Xperia-> clear data-> OK and then reboot the phone. But be aware that this will reset your homescreen to the default settings.

  

  See wrote:

  If you still see these apps under settings-> Apps, try to uninstall them from there and see if that helps.

  If you do not, go to settings-> Apps-> all-> House Xperia-> clear data-> OK and then reboot the phone. But be aware that this will reset your homescreen to the default settings.

  I think that this red text has been copied from one of my answers to help anyone with a similar problem on this forum

• All the disappered from the desktop icons, but the text is still there, and the start bar does not open

  http://imgur.com/PtdyS

  Hi, I hope you can help me... My missing desktop icons with hotbar after a reboot, but the text is there and programs can still be opened. Thus, my Dowes does not open. Any idea how this can be? I ran Antivirus and malware programs already tried rebooting several times, by clicking on the desktop and then 'show icons', Ive tried everything... Also, in my "guest" all account works well, which leads me to believe there is a problem with explorer.exe.
  Follow steps 1 and 2 (under the deletion process) in this malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  If you have any questions about the instructions, just ask. Let me know if this helps you.
  Brian

• Cannot read the timestamp of the file LVM in table or export to Excel

  Good afternoon!

  Im having issues return timestamps from a LVM file and an excel file.

  Ulitmately, I have a series of files LVM with 6 channels of data and timestamps of correspodning.

  When I read the back files in a table, the channel values are analyzed, but the timestamp is no where. The channel data then exported successfully to an excel sheet (less the time stamps).

  How can I extract the timestamps with the channel data and bring them into an excel sheet?

  NOTE: I do not know you can open the file LVM directly in excel, however, information is not "analysable.

  I appreciate the toughts. I have attached my experimental code as well as the data set, I am trying to extract. I have also included a spreadsheet excel destination.

  Hi, ASAT,.

  Is there a reason that you do not simply write it as File.vi to write your signal data in the excel worksheet? It is an easy way to put in your signal data to an excel spreadsheet (see file attachment). You can also view the code in this Express VI to see how this is achieved.

• Analysis of chain to get the Timestamp, LV 2012 problem

  I have a VI I wrote in 2013 LV where it works very well.  But with the same VI in LV 2012SP1, analysis of string to get a Timestamp does not work.  Attached is the VI recorded in LV2012 SP1.

  Background:

  I work with an FPGA where I am synchronizing pulses using the clock of 40 MHz.  I connect these impulses in a file on my host PXI. To correlate the clock on the FPGA with a log file and real life someday, I named the file with a timestamp, and the meter 64-bit encoded hexadecimal string.  Now, I have a pretty good correlation between when the 64-bit against him and the time of day to facilitate the search of the data file.

  Now, I try to analyse the file name, so in my analysis of code I can reassociate the value 64 bits with the time of day using the string functions to separate the file name.  With a few regexes (which I've never used in real life before), I've broken down the chain and got the base time as a timestamp, and the counter value as a 64-bit integer.  The VI works very well in 2013 LV.

  But when I saved it to the LV 2012, analysis of string to get the timestamp fails.  No error, but the timestamp shows 19:00 12/31/1599 (I am GMT - 5).  I have no idea why.  A bug in the parsing of the string that was set in 2013 LV?

  Please run the attached VI in LV 2012.  Confirm if it fails for you.  Then open it in 2013 LV and see if it works for you.

  I am trying to make it work in LV 2012 because this project is locked in this version of LV for now.  I can probably do something to reorganize the time string to get something that will scan a digital time stamp if I have to.

  Hi Bill,

  Sorry to be a bit late on this point, I just came across this thread after the hunt for the CAR for a separate issue. The fix for 300375 CAR is what causes the difference in behavior between versions of LabVIEW. It appears on the list of known issues of LabVIEW 2013, although the description focuses more on the fixed number than other possible differences between the versions.

  The thoughts in this thread died on what happened in the difficulty. LabVIEW 2013 now pick up the string of year 2 or 4-digit number when you use the %y or %Y tags, respectively. Previously, the behavior was more forgiving in the year format, leading to incorrect behavior that you have observed strings of 4 digits in the year the %y tag. The original problem, you pointed out (2012 incorrectly string manipulation of tagged %y (2 digits) 2-digit year is precisely what has been fixed in the CAR.

  Regarding your strange result over the years with the tag %Y-2 digit, this is a limitation of the type of data Time Stamp itself. The year will always be converted to between 1600 and 3000. So no time extreme travel journaling. Yet.

  See you soon,.

• Importing data (6 areas) from Excel to the address book of Tb. 6 all appear in the Contacts pane, but 3 of them are in the process of work and do not show up to above therefore impossible to sort.

  I try to import the file Excel Tbird address book data (6 fields). All the 6 fields appear in the Contacts pane, but only 3 of them appear in my list where I can sort them. I tried to add all the options for display (CAT name, organizations, etc.), but there is no data in one of these. The other 3 fields appear for each entry in the Contacts pane, but they appear below the blue bar that says 'work '. It is a zip code and the name of the city that I want to be able to sort the whole by address list.

  I guess that you export your Excel file to a comma separated file.
  Try to include the column names until the last necessary one, in the same order and spelled as an address book.
  When you export mark the part you want to use column incl. names
  Open your .csv in a texteditor, y at - it no additional space, strange letters, commas, etc.

  The best way to get all the names is to export an address book to a csv file

• My iPAD asks me to update to OS 9.3, but the update fails because it says that the iPAD is not connected to the internet and when I connect to my computer iTunes it say my OS is up to date.  Help, please.

  My iPAD asks me to update to OS 9.3, but the update fails because it says that the iPAD is not connected to the internet and when I connect to my computer iTunes it say my OS is up to date.  Help, please.

  I'm surprised to hear that for an iPad 2 that the issue had apparently been set for 2 s. Please see this for more details as I know them. Maybe the servers at your site have not been updated yet for the new version of the iPad 2.  ???

  Apple released the update iOS 9.3 for older devices (air of iPad and previous iPhone, 5 s and previous) due to problems with Activation. See the following for details and possible solutions.

  http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

  https://support.Apple.com/en-us/HT206203

  A new version for the iPad 2 is now available which does not require the activation step. A new version for other devices is not yet available.