Multipathing - addition of new paths

Similar Questions

• Dialog box "Load WARNING summary": charge dependence of the new path

  Hi gurus of LabVIEW,.

  To explain the issue see the following behavior:

  My main Application is in

  01_Main.lvproj

  This project (01_Main) contain several baskets libraries built from another project file, let's say

  02_PPL.lvlibp

  03_PPL.lvlibp

  My problem comes when I opened the 01_Main.lvproj get the dialog box 'support WARNING summary": charge dependence of the new path.

  The gap between all the path's SVN folder that is duplicated;

  Track:

  SVN_Project/SVN_Project/02_PPL.lvlibp/Myinstr.VI

  NewPath: (which is the right of an ofc)

  SVN_Project/02_PPL.lvlibp/Myinstr.VI

  Opening Myinstr.vi in the containning the 02_PPL.lvlibp project does not appear of the warning... or the dependency problems.

  No idea how to solve those WARNING? Even if ignoring their job well... How to solve those for good?

  ARO

  Vincent

  
  

• Offset path, leaving only the new path?

  Is it possible to use the 'path of shift' command on an object and end with just the new paths of offset.

  It is a double select / Remove the excess paths later.

  ++ Michael

  Apply it as effect > path offset and expand your appearance thereafter.

  Try to make something out of it.

• The opacity setting moves its value after the beginning of a new path.

  When I pre-select an opacity value, before drawing a new path with the pen tool, a fill color and outline color... I never have the effects of opacity to stay, as I put it. It comes down to the value of 100% as soon as I put my initial point of departure for the new path.

  I want very much to the opacity of stay to the value I set, since based on the transparency of the fill to see what I'm following up to the wire. Forget I have something big that could be causing this, or there may be a way to do better what I'm doing?

  Thanks for any help,

  Jim

  Try to uncheck it in the appearance Panel.

  

• Illustrator: Starts a new path from an existing anchor point without continuing the path

  Is it possible by using the pen, or any tool tool, to start a new path to the exact coordinate of an anchor without the tool pen automatically linking the existing to the new path?

  CG,

  The guides are your friends.

  With the selected pen tool, you can:

  (1) use the P key after the end of the first path;

  (Somewhere, 2) click close and keep Clicked, and then hold down the space bar and drag it to align with the anchor Point of end of 1) and drag the handles if desired, and then continue on the street as usual.

• the addition of several paths in a compound path

  If I use the GUI to add multiple paths in a compound path, all I have to do is select multiple paths and choose object-> compound path-> order manufacture (or ctrl-8). When I do that, then the path of the bottom that is filled has holes "through" creating a window in the form of small roads that were on top again. For example, a large rectangle with a white fill color is the background element and two smaller paths are on top. I have create a compound path and everything that is below the new compound path is reflected in most previous form two small paths.

  If I use JavaScript and create a new compoundPathItem and move 3 trails, with the largest being first, then I get a compound path, but only the first small objects creates a transparent space.

  Here's a simplified example:

  var grpMask = doc.groupItems ['mask group'];
  
  var compound = grpMask.compoundPathItems.add ();
  var pathobj = grpMask.pathItems ['bigbox ""];
  pathobj. Move (Compound, ElementPlacement.Inside);
  pathobj = grpMask.pathItems ['PathLeft ""];
  pathobj. Move (Compound, ElementPlacement.Inside);

  
  pathobj = grpMask.pathItems ['PathRight ""];
  pathobj. Move (Compound, ElementPlacement.Inside);

  In the example above, the "bigbox" has left and right channels above it, but only the left path creates a transparent space in the original box.

  I also tried to use PLACEATEND instead of INSIDE and the two smaller paths and move the group to the compound path.

  Merging the elements of path won't work - I want to keep the original path closed and intact without drawing a line between them so I can't simply add their pathpoints.

  Is move() the best way to add existing paths to a new path

  Thank you!

  I'm not sure,

  Take a look at polarity and/or evenodd propertys of pathItems inside the compoundpath.

  Maybe there is a difference.

  ?

  Chris

• Method of Report.Save, the report has been made in a new path, but why is the empty file?

  Hallo,

  I have a problem to save the report file in a new way.

  In my code, I used the Runstate.Report.Save(newpath, overwrite, 0) method to save the report.

  And after the excution of the test, I can find the file of report in the right place, but if I open it, it's empty, I mean, there's nothing in this report.

  Someone has an idea? Where is the problem? And what I could do?

  Thank you!

  Cabio

  Hi Cabio,

  Before answering your question, I would like to let you know that you can configure the path to the report file in the report file path tab report options.  You can choose from several options, including by specifying an expression that is customized for the report path.  This will allow you to customize where the report is saved without changing code.

  If this isn't meeting your needs, the problem you're likely to have is that you access report until the report is actually produced.  To access the report object after it has been populated, replace the ProcessCleanup callback, which runs after the report has been generated.  (see the example of navigation PreUUTCallback for an example of substitution of a reminder.

  Note: if you use TestStand 2012, this method will not work unless you configure Report Builder for not using a new thread.  You can configure this option in the treatment of dialogue by selecting the checkbox options more results.  If you do not want to use a new thread, you can access the report by changing the sequence of AddUUTReportAndSave in ReportGen_ATML.

• A new PATH program introduced in 2.7.0?

  If someone else can confirm this, it would be great.

  I added a location in my path variable while a new battery commissioning, but it is not applied when the battery is attached.  I've updated the battery to check and desperately, my position is in the PATH variable.  It is in the stack, but it does not apply when it is attached.

  The question is apparently more with the 2.6.0 agent.  When I upgraded to a virtual machine to the 2.7.0 agent, the PATH variable is correct and reflects what has been added in the stack.

• Help with the addition of new section (extension) to the report

  Hello:

  I need to check my VCs and collecting information on their versions and ESXi versions and version numbers under them.  I wrote a script (see below) that does exactly what I need, but only for 1 (one) VC.

  I can't understand how to add additional venture capital of the report information and make sounds too good I have to one.

  Ideally, I want to use Import-Csv and import all my name of VCs from the file.

  
  

  Any help would be really appreciated.

  Thank you!

  
  

  Here is my script:

  Se connect-VIServer "vcenter1"

  Get-data center | `

  Tri-objet -propriété nom | `

  ForEach-Object { }

      $Datacenter = $_

      $Report =  "" | Select-Object VC_Name, $vmhost, VC_Version and cluster_name Host_Version

        $Report . VC_Name = $defaultVIServer. Name.Split ('.' ) )[0]

        $Report . VC_Version = $defaultVIServer.version + '_' + $defaultVIServer.build

        $Report

      $Datacenter | `

          Get-Cluster | `

        Sort-Object -Property Name | `

  ForEach-Object { }

          $Cluster = $_       

          $Report =  "" | Select-Object VC_Name, $vmhost, VC_Version and cluster_name Host_Version

          $Report . Cluster_name = $Cluster. Name

          $Report

              $Cluster | `

            Get-VMHost | `

  Tri-objet -propriété nom | `

  ForEach-Object { }

              $VMHost = $_

              $Report =  "" | Select-Object VC_Name, $vmhost, VC_Version and cluster_name Host_Version

              $Report . VMHost = $VMHost. Name . Split ('.' )[0]

                    $Report . Host_Version = $VMHost. version + "_" + $VMHost. build

                    $Report

  }

  }

  } | Export-Csv -Path C:\Users\test.csv NoTypeInformation - -UseCulture

  Try like this

  $report = @)

  Cvnames.csv Import-Csv - UseCulture | %{

  SE connect-VIServer $_. VCName

  $row = "" | Select-Object VC_Name, cluster_name, VMHost, VC_Version, Host_Version

  $row. VC_Name = $defaultVIServer.Name.Split('.') [0]

  $row. VC_Version = $defaultVIServer.version + '_' + $defaultVIServer.build

  $report += $row

  foreach ($datacenter in (Get-Data Center |)) Sort - Object - property name)) {}

  foreach ($cluster in (Get-Cluster-location $datacenter |)) Sort - Object - property name)) {}

  $row = "" | Select-Object VC_Name, cluster_name, VMHost, VC_Version, Host_Version

  $row. Cluster_name = $Cluster.Name

  $report += $row

  foreach ($vmhost in (Get-VMHost-location $cluster |)) Sort - Object - property name)) {}

  $row. VMHost = $VMHost.Name.Split('.') [0]

  $row. Host_Version = $VMHost.version + '_' + $VMHost.build

  $report += $row

  }

  }

  }

  Disconnect-VIServer-Server $_. VCName-confirm: $false

  }

  $report | Export-Csv-path C:\Users\test.csv - NoTypeInformation - UseCulture

• Defining the new path for the data files for restoring using the VALUE of NEWNAME FOR DATABASE

  Version: 11.2.0.3 Linux
  
  Today, I had to do a restore RMAN to a new server and I came across the post following RTO on the VALUE of NEWNAME FOR DATABASE
  
  ALTER database open resetlogs upgraded;         error to throw
  
  So, I thought to use it to indicate the new location of the data files to restore.
  
  That's what I did
  ===================
  
  Restore the control file and catalog items to backup using the command of CATALOGUE START WITH. Then I started the restoration

  $ rman target / cmdfile=restore.txt
  
  Recovery Manager: Release 11.2.0.3.0 - Production on Thu Jul 26 04:40:41 2012
  
  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: SPIKEY (DBID=2576163333, not open)
  
  RMAN> run
  2>  {
  3>  SET NEWNAME FOR DATABASE TO '/fnup/hwrc/oradata/spikey';
  4>  restore database  ;
  5>  }
  6>
  7>
  8>
  executing command: SET NEWNAME
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of set command at 07/26/2012 04:40:43
  RMAN-06970: NEWNAME '/fnup/hwrc/oradata/spikey' for database must include %f or %U format
  
  Recovery Manager complete.

  Don't know how it worked for Levi without %f or %U. So, I added %f
  

   $ vi restore.txt
   $ cat restore.txt
  run
   {
   SET NEWNAME FOR DATABASE TO '/fnup/hwrc/oradata/spikey/%f';
   restore database  ;
   }
  
  
   $ rman target / cmdfile=restore.txt
  
  Recovery Manager: Release 11.2.0.3.0 - Production on Thu Jul 26 04:45:45 2012
  
  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: SPIKEY (DBID=2576163333, not open)
  
  RMAN> run
  2>  {
  3>  SET NEWNAME FOR DATABASE TO '/fnup/hwrc/oradata/spikey/%f';
  4>  restore database  ;
  5>  }
  6>
  7>
  8>
  executing command: SET NEWNAME
  
  Starting restore at 26-JUL-12
  using target database control file instead of recovery catalog
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID=19 device type=DISK
  
  channel ORA_DISK_1: starting datafile backup set restore
  channel ORA_DISK_1: specifying datafile(s) to restore from backup set
  channel ORA_DISK_1: restoring datafile 00001 to /fnup/hwrc/oradata/spikey/1
  channel ORA_DISK_1: restoring datafile 00002 to /fnup/hwrc/oradata/spikey/2
  channel ORA_DISK_1: restoring datafile 00003 to /fnup/hwrc/oradata/spikey/3
  channel ORA_DISK_1: restoring datafile 00004 to /fnup/hwrc/oradata/spikey/4
  channel ORA_DISK_1: restoring datafile 00005 to /fnup/hwrc/oradata/spikey/5
  channel ORA_DISK_1: restoring datafile 00006 to /fnup/hwrc/oradata/spikey/6
  channel ORA_DISK_1: restoring datafile 00007 to /fnup/hwrc/oradata/spikey/7
  channel ORA_DISK_1: restoring datafile 00008 to /fnup/hwrc/oradata/spikey/8
  channel ORA_DISK_1: restoring datafile 00009 to /fnup/hwrc/oradata/spikey/9
  channel ORA_DISK_1: reading from backup piece /u07/bkpfolder/SPIKEY_full_01nh0028_1_1_20120725.rmbk
  channel ORA_DISK_1: errors found reading piece handle=/u07/bkpfolder/SPIKEY_full_01nh0028_1_1_20120725.rmbk
  channel ORA_DISK_1: failover to piece handle=/u07/dump/bkpfolder/SPIKEY_full_01nh0028_1_1_20120725.rmbk tag=SPIKEY_FULL
  channel ORA_DISK_1: restored backup piece 1
  channel ORA_DISK_1: restore complete, elapsed time: 00:01:56
  Finished restore at 26-JUL-12
  
  Recovery Manager complete.

  As you can see, RMAN restore data files to the desired location. But the data file names ended up as

  1
  2
  3
  .
  .      
  .
  9

  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -----------| Holy Cow |-----------------------------
  
  
  So I had to rename each file as below
  

  $ mv 1 /fnup/hwrc/oradata/spikey/system01.dbf
  $ mv 2 /fnup/hwrc/oradata/spikey/sysaux01.dbf
  $ mv 3 /fnup/hwrc/oradata/spikey/undotbs01.dbf

  I would have been better in execution of the order for each data below file

  SET NEWNAME FOR DATAFILE

  Now, I think, there is no advantage in using NEWNAME SET of DATABASE to. Only the disadvantages. I did anything wrong above?

  Martin;

  On the issue of the VALUE of NEWNAME FOR DATABASE, you must specify at least one of the first three of the following substitution variables to avoid collisions of names: %b f % U. see semantic entry for TO 'filename' for a description of the possible substitution variables.

  You use %f

  %b
  
  Specifies the filename without the fully qualified directory path. For example, the datafile name /oradata/prod/financial.dbf is transformed to financial.dbf. This variable enables you to preserve the names of the datafiles while you move them to different directory. During backup, it can be used for the creation of image copies. The variable cannot be used for OMF datafiles or backup sets.
  
  %f
  
  Specifies the absolute file number of the datafile for which the new name is generated. For example, if datafile 2 is duplicated, then %f generates the value 2.
  
  %U
  
  Specifies a system-generated unique filename. The name is in the following format: data-D-%d_id-%I_TS-%N_FNO-%f. The %d variable specifies the database name. For example, a possible name might be data-D-prod_id-22398754_TS-users_FNO-7.
  

  Source - E10643-01

  Backup and recovery reference

  http://docs.Oracle.com/CD/E14072_01/backup.112/e10643/rcmsynta2014.htm

  I see CKPT and I agree on that!

  Best regards

  mseberg

• New path-layers of all lines with the tool pen?

  Hello! I am currently using Illustrator CS6 as a test version, and when I use the tool pen to make a beaver (school work), it all end in a single layer. I want to have a new layer-path of each line with the pen tool, so I can remove rows from the layer panel too. For the moment, it's a layer that has a picture of a beaver, and I can't see the individual lines that I drew. When I used CS5 recently I had no such problem.

  There is a setting that I can change or does have something to do with the news of CS6?

  If you want to see a 'sex' for each object changes the display of the layer panel by choosing Options from the Panel menu in the layer panel. In the lower part of the Panel options window, make sure that groups and objects are both checked. You will then see a 'sex' for each object.

  I quote 'sex' here because technically they aren't the layers. They resemble layers and are in the layer panel, but they do not exactly allow options that allow actual layers. You can select and move objects in the Panel this way however.

• Need to define new paths for assets in organization CS6

  Windows 7 Home. Just installed CS6 Production Premium CS4 optical disc upgrade. Downloaded all the 1.7 GB updates and all the applications are enabled.

  When I opened body he came without listing all of my body CS4 projects. When I click on one of the organization files I get messages saying that it is an old version and must be updated. I click ok but problem not solved. I changed the paths for assets used in CS4 projects and wonder if this is the problem. How to upgrade the CS6 projects in new ways?

  Do not change the paths before you open your old project with CS6.

  CS6 will ask you if want to convert old project again.

  Say Yes and enter a new location and a name.

  When you click ok, all assets will point to new project.

  

• Addition of new javascript in LiveCycle script editor

  The form has a button print and already has this javascript xfa.host.print (1, "0", (xfa.host.numPages - 1) m:System.NET.SocketAddress.ToString (), 0, 1, 0, 0, 0);

  How can I add the following to the same key, and its click event javascript code?

  newDocName = "";
  F1 = this.getField ("topmostSubform [0].") Page 1 [0]. ("Last_name [0] ') .valueAsString;
  If (f1! = "" ") newDocName += f1 +" ";"
  F2 = this.getField ("topmostSubform [0].") Page 1 [0]. ("First name [0] ') .valueAsString;
  If (f2! = "" ") newDocName += f2 +" ";"
  F3 = this.getField ("topmostSubform [0].") Page 1 [0]. Date [0]') .valueAsString;
  If (f3! = "" ") newDocName += f3 +" ";"
  F4 = this.getField ("topmostSubform [0].") Page 1 [0]. Email [0]') .valueAsString;
  If (f4! = "" ") newDocName += f4;

  newDocName = newDocName.replace (/ [-,-/,-:,-*,------?,------", \ <, \ >, \|,\,,\n,\r]/g," ""]);

  docPath = this.path +' ';
  docPath = docPath.substring (0, docPath.lastIndexOf("/") + 1);

  mySaveAs (this, docPath + newDocName + ".pdf");

  I had this working in Acrobat on an earlier version of the same form (with an external script in the Acrobat directory - so everything worked perfectly), but in this form, I did not have full access. My only option is to try and add this javascript to save the file under a new name of file using LiveCycle.

  Post your question in the forum for LiveCycle Designer.

• Disable the addition of * new * miniatures

  Currently, the thumbnails are disabled on the page of thumbnails. Very cool.

  But Firefox continues to add new links on the page of thumbnails. Not cool.

  How can I keep the current set of links on the page of thumbnails, not to allow new links, but keep the page of thumbnails available?

  No, this is not possible.
  Firefox displays some the most visited sites in the tiles on the subject: newtab page, so if the calculated frecency value changes so the tiles will be updated accordingly.
  If you want the tiles remain the same, and then click the button pinned onto the tile.

  • https://en.Wikipedia.org/wiki/Frecency

• LaserJet Pro200color MFP M27nw: scan to email addition of new emails to be sent from

  There is currently an email registered under the email from the sender, but I want to add a new because the e-mail address belongs to someone who no longer works in the office. How can I change?

  Hi @Coryg11,

  Please clarify for me. Below, I've posted a link to a document that has some instructions on how to install and configure the scan to E-mail feature of your printer. When you open the link, go to the section titled "Set up the analysis of the feature of electronic mail on a Mac" Please try all the steps in order and get back to me with the results.