Multiple dependent cells with ROUNDUP

Similar Questions

• Editing a cell with text in

  I drives me crazy.  I want to edit a cell with text in.  If I click on the cell, the entire cell is selected and wiggles autour.  I can't click on new to add an insertion point.  It seems to me to have 2 options: 1) of a new type that will erase the entire cell and add new content or 2) move the cell to another location (it is jiggly)

  What I am doing wrong.  How to change the cell.

  Double-click the cell to enter edit mode

• CS6 is compatible with El Capitan? I have multiple problems, mainly with InDesign, that is broken, disappearing type elements, limited cancellations, low memory warnings. I would like to hear from someone representing Adobe on this.

  CS6 is compatible with El Capitan? I have multiple problems, mainly with InDesign, that is broken, disappearing type elements, limited cancellations, low memory warnings. I would like to hear from someone representing Adobe on this.

  Many people find such problems with CS6 in El Capitan. There will be no update for CS6, it has reached its end of life.

  You must go back to the previous version of the operating system, or upgrade to creative Clud.

• vRA: identity device or vSphere SSO when there are multiple vCenters (each with their own SSO) in the environment?

  The installer: We have multiple vCenters each with their own SSO. We must build a minimum install vRA lab 6.1 and used the SSO to the vCenter which is the endpoint lab (and ended up having problems when this vCenter SSO had to be rebuilt and in turn liquid reconstruction vRA). Building on a vRA 6.2 Distributed Lab (based on deployment in the 6.1 reference architecture) to validate our production plan and decided to use the identity.

  Question: For a production buildout there is no reason not to use the device of the identity (scalability, performance, lack of HA)? If you are using vSphere SSO, when there are multiple vCenters one that should be used for SSO of vRA? If that vSphere SSO is never removed (say on the whole things are replaced by a central SSO for all vCenters rather than each on their own, or some issue needs to be rebuilt) is there a clean way to repoint SSO vRA without a reconstruction?

  Post edited by: RebeccaW (removed unrelated to Postgres question)

  What I did in this case is to build a fresh cluster SSO using vCenter SSO and pointing vCAC on this one. It becomes my main source of SSO and I slowly vCenters point and other components to it overtime. You usually put vCAC SSO signed certificates and generally I find people vCenter SSO deployment in this way. To remedy this trying to modify an existing SSO vCenters and risk having to reinstall your VC because you missed the CERT, simply create a new. This also alleviates a changing overtime vCenter and spoil the vCAC SSO. The unit of identity cannot be clustered or joining existing areas of SSO. So if you are looking for HA and scale which probably does not cut it.

• Multiple MIS servers with unique vCenter

  Servers multiple SRM integration with vCenter unique?

  Yes. documentation is generally called the recovery site model actions to achieve this. You must use the "custom installation" option to install the nth instance and you must designate this pair of instances with the same identifier string.

  VMware KB: Configure Recovery Site-sharing feature in VMware Site Recovery Manager 4.x and 5.x

• How to associate a value in a cell with a page number?

  I have a series of diagrams that I would like to create a table to display the page on it's, as well as a description of it. When creating, I store simply the value of the page number in a table and use it when creating the table, however, if the chart is moved to another page, then the cell displays the wrong page number, and the table loses its meaning. Is there a way I can link the page number displayed in the table cell with the number of the page currently?

  If you are on CS4/5, you can use the reference feature to get dynamic page numbers. The diagram is a picture, isn't it? You can add a block of text to the graphic image containing the image (use the same geometric limits so that the two frames of the same size; no line, no fill - btw you can do only by the script, not interactively in InDesign) and add a hyperlinkTextDestination . So when do the diagrams, you just update the references.

  Kasyan

• SQL query: How to match multiple names strictly with its appropriate values

  Hi all
  
  Assume there is a table of CODES (with 3 columns) as follows:...
  ------------------------------------------------
  Name ID value
  ------------------------------------------------
  SFO 100 080
  200 NY 044
  300. THE 040
  ------------------------------------------------
  
  I would need to write a SQL to retrieve the rows that match few of names and values. For example: (1) name = "NY" and value = '044' and (2) name = "LA" and value = "040".
  
  I wrote this sql...
  SELECT id, name, value of CODES whose name IN ('NY', THE ') and the value IN ('044 ', ' 040')
  This returns 2 rows as expected.
  
  At the same time, even for the following query, the same 2 rows are returned (which is false)
  SELECT id, name, value of CODES whose name in ('NY', THE ') and value in ('044 ', ' 444')
  -See the code std 444.
  
  My requirement is that the above query should return to the line for NY.
  
  My question is: how to match multiple names strictly with its appropriate values... ? That is to say, unless '040' is specified in the part 'value', the corresponding line in 'LA' should not be returned...
  
  I feel, nor the case AND neither the case of GOLD can be used in Where clause to check these 4 values.
  
  Any ideas... ? Can you please let me know... ?
  
  Thank you
  REDA

  as:

  select id, name, value from CODES where (name, value) in (('NY', '044'), ('LA', '040'))
  

  Published by: Lacotte Renaud on February 16, 2010 10:35

• Configure multiple HTTP servers with APEX SSO

  Hello
  We currently have APEX configured to work with SINGLE sign-on using the URL http://server.com:7777/pls/apps. Some companies prevent users to go to the URL with the port 7777. We set up a new server http https rather than just current http implementation. All applications that use the SSO do not work with the new URL. I've added the new partner application in the SSO admin and tried running @regapp.sql. APEX may be configured to run multiple servers http with APEX engine registered as a partner app? We are finally going to a single server but need both up during the transition period. Thanks for any help.
  
  Brian

  Brian,

  Yes. As long as the value of lsnr_token inserted by regapp is unique. It looks like HTML_DB:hostname:port.

  Scott

• BI Publisher RTF model - fill a cell with a group without line breaks for each element

  I have a fairly rigid rtf model with multiple cells. A cell in particular just display a value of a single group.

  I want to display all the values of group in the cell, but instead of display each value on a new line of the

  cell and cell resizing, I need a way to repeat the values (we hope) without resizing the cell.

  Thus, for example, given a simple group such as < GROUP > < VALUE > where the GROUP contains the VALUES 1, 2, 3, 4 and 5.

  a normal <?-foreach: GROUP? > <? VALUE? > <? end foreach? > product

  CELL
  OUTPUT: 1 2 3 4 5

  What I would like is to be able to output the following (assume the slot size cell is not resized one appears exactly as it does in the rtf)

  CELL
  OUTPUT: 1 2 3 4 5

  The tricky part is that I'd love to be able to have the text wrapping, once he arrives at the edge of the cell. Is there a simple way to do this?

  After a search in a dozen of nets beforehand of course, I find the answer, about 10 minutes after the announcement.

  Knew it was something simple!

• Checking if cell with specific text exists

  Prerequisites

  I have a few tables with cells as follows:

  

  Also, I have a few tables more as follows:

  

  ---

  Goal

  Note the 'YES' and 'NO '. in the column 'Included' in the table 'example requirements '.

  • You will notice that for "JAE 101" in the "requirements of the example', a 'YES' is right, because I have included it in the table"Example half of".". "
  • Conversely, there is a 'NO' to the right of "OME 321' because there is no such ID in the half of"example".»
  • Also, there is "YAE 555' has nothing to do with the table"Example requirements".

  ---

  Problem

  Unfortunately, the scenario described was a model; the 'YES' and 'NO' were placed manually by myself.

  Should what formula I put in the column "Included" the table "Example requirements" to reproduce this scenario?

  I think you need to use the following functions:

  IFERROR

  VLOOKUP

  It might look like this:

  SIERREUR = (VLOOKUP (A2, other table::A:B, 2, false), 'No')

  basically the research takes a value, looks like it upwards on the left of a table column, if it finds a match, take a specified column (2 in this case). If it does not find that it returns an error (false at the end make sure of this)

  the part of the function SIERREUR tests whether the search returns a value or an error. If a value, return which, in the case otherwise (error), turn the second argument (SO in this case)

  Hope this helps you.

  Jason

• Count cells with a range in numbers

  Is it possible to have the numbers read the value in a cell and there is in a given range. For example: count the number of cells that have a value between 85 and 100.

  Something like that?

  

  = COUNTIFS(A,">="&85,A,"<="&100)

  COUNTIF works with pairs of columns-condition.

  SG

• align the cells with shared values

  3.6.1 the numbers

  I would like to compare two columns and align the cells, if they are equal. Ideally, I would like to include the adjacent cells in the second column in the alignment.

  Example:

  Run the formula (if possible) to format the following text:

  

  As follows:

  

  Hi cnickflight,

  Easy to do by transferring the data to another table.

  

  Table 1 contains the original data. I reduced the names of fruits to three letter codes to reduce type them, but this does not change the process.

  Column A of table 2 contains a formula that copies the existing data in column A of table 1 and insert null strings when there is no data in the table 1.

  The formula is entered in cell A2 and filled down.

  Table 2::A2: = IF (ROW () −1 > COUNTA (table 1::A),"', SHIFT (table 1::$A$1,ROW()−1,0))))

  Fill until the end of the column.

  Columns B and C contain a VLOOKUP formula. The formula is the same in the two columns, with the exception of the number indicating which column of the table, the returned value must come. The version of 'testing' of the formula in B2 is shown. When filled to the bottom, this formula should copy the names of fruits where they are both on the table 1, in the line that they appear in column A, and display a triangle of error in the lines where there is no name in column B to the one in the column (and in the rows where column A is empty). The error message for each of them should be "VLOOKUP couldn't find the requested value."

  Table 2::B2 (trial version): = VLOOKUP ($A, table 1: $b$ C, 1, FALSE)

  (FALSE appears in the formula as 'exact match' editor)

  If the behavior is as described, add IFERROR before VLOOKUP, and , "") after the closing parenthesis to match the 'final version'. " (See "why two versions? below.)

  2::B2 (final version) of the table: SIERREUR = (VLOOKUP ($A, table 1: $b$ C,1, FALSE),' ')

  2::C2 (final version) of the table: SIERREUR = (VLOOKUP ($A, table 1: $b$ C,2, FALSE),' ')

  Fill both until the end of their respective columns. Results should now be as shown above.

  Note: Why two versions?

  Function SIERREUR is ideal for use as a trap for the error, but it acts on all errors, not only the one you plan to trap. Best practice is to add to this trap only if you are sure that the formula generates other error messages that awaits you and using in this case we know VLOOKUP, who has been charged with finding an "exact match" will throw an error when it does. Function SIERREUR catches this error and puts a string anywhere in the cell, making it appear empty.

  Kind regards

  Barry

• trying to trigger multiple analog measures with each pulse of an encoder 500PPR

  I'm taking steps analog multiple sensors to formula 6 with each pulse of a 500 ppr encoder and write these to a file.  I met problem is I don't get 500 readings with 1 revolution of the encoder the more I received is 187 but is not consistent.

  using

  Card series E 6024

  EIB L25G encoder

  Still relatively new to labview as well as using an old version 7.0

  Thanks in advance

  Never mind after watching it somemore I found that I was using the wrong sampling frequency

• Multiple Page Scan with HP7510

  Hello

  I have a HP7510 printer that is used on a MacBook Pro running the Version of OSX Mountain Lion 10.8.3. When I want to create a multiple page PDF file of unique file name, I can't seem to find a way to do this, use the HP utility application. There is no option to scan multiple pages into a single PDF document. Is it possible to do it with the set up I use?

  Thank you

  Hello

  You can scan multiple pages scan using the HP Scan application, not the utility HP itself, it should be located under Applications > Hewlett-Packard.

  If you do not find the app install the latest HP software below by selecting the software recommended HP.

  Then analyze the pages by following the steps on the screen, once you're done save the scanning to PDF:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-107205-1&cc=us&DLC=en&LC=en&OS=219&product=5070121&sw_lang=

• Configuration of multiple sources EBS with FDMEE systems

  Hi team,

  Please provide your valuable suggestions in the present.

  We have three systems of source EBS and we need all three to be set to FDMEE to retrieve the GL data. I set up the first system EBS in topology ODI with identification information entered to the physical architecture of EBS_DATA_SERVER. Now for the other system two EBS how should I proceed. Can we have multiple source configured EBS systems both in FDMEE.

  Please help by providing your valuable contributions.

  Kind regards

  Laetitia Rasheed

  It is possible to 11.1.2.3. 530 and higher.

  Take a look at this document, well documented FDMEE: how to save multiple systems from the same Source Type in a single environment. (Doc ID 1997512.1)

  All the best.

  Kind regards

  Deker P.