Problem in installing an application in Vista

Similar Questions

• Install Labview application on vista machine.

  A fairly new programmer, I wrote an application in Labview 8.6 and built an installer which works fine on XP but when I try to install it on a Vista machine, I get an error as follows:

  z:\...\Volume\setup.exe the parameter is incorrect.

  As I say on XP Pro, no problem.  Anyone has any ideas that might help?

  I guess the z: drive letter you are trying to install the software from a network drive. Try to copy the Setup program on a local drive and install from there. I had problems calling installers directly from network resources in Vista.

• Problems after installing KB978338 on Windows Vista SP2

  I met a problem after installing KB978338. The update installs without error or problem, but the system is extremely inadmissible after the reboot. The "\Windows\system32\config\systemprofile\desktop is not accessible" error, and the system is practically unusable. Normally opens the Task Manager and system seems inactive, but you try to start a new application from the Task Manager gave an error "hose is not valid.

  System is Vista Home Premium SP2 installed without any obvious problems before the update. Start the system restore and go back to immediately before the update of the results in the system back to normal functionality and responsiveness.

  I've never seen or either of these mistakes before and my research has not yet been able to find something similar, so I am at a loss to start this kind of problem with an update of troubleshooting.

  Please tell us how can I still troubleshoot or solve this problem.

  Thanks in advance.

  JohnBrown

  Halifax, NS

  So I "hid" the update and you call this one closed without resolution.

  While the overall rating of gravity for KB978338 is moderate (critical vs), it of still a security update and must be installed.

  Repost:

  See the section "How to get help" of http://support.microsoft.com/kb/978338

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Purchasing problems of installation of the security updates Microsoft may also visit the following page for assistance:
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problems to install the application of cc in W8.1 desktop

  Hello. When you try to launch the application of cc desktop I just get this blank page standing in the middle of the screen with a blue spinning wheel which evacuated after a few seconds. It stops here. I tried the CC cleaning tool and download again without any result. I have a cc membeship, w8.1 64 pro Adobe. 8 GB of RAM, AMD radeon 7700, Samsung SSD840 256 GB with 70 GB free space. Regards Ole Christian.

  I tried everything and nothing has worked. The solution for me was to open a new account with a new email address and password and install again. Now, everything works fine.

  Cordially OCB

  Sunday 3. 2015 September 19:31 CEST skrev Sheena Kaul [email protected]>:

  Sheena Kaul has created the discussion

  >

  "Cc in W8.1 desktop application installation problems.

  >

  To view the discussion, visit: https://forums.adobe.com/message/7928010#7928010

  >

• Problem on install Dreamweaver CS3 on Vista

  I tried to install Dearmweaver CS3 on Microsoft buisness 6.0.6001 window
  but when the game starts is apear for a seconds then disappear
  
  I tried to search the forums but all issues after this step
  

  Thank you verymuch
  This is the work now
  This for you Alain St-Pierre

• When you try to install an application on an iphone IS, after clicking on install, a circle begins to turn.  Even after 15 minutes, the circel is still running and he never finished installing the app

  Problems to install an application

  Delete it and try again.

• Please help: billing is problem/unable to install free applications?

  I bought two apps a few days ago and never received a receipt for those bought as I had received with others. I don't know if this is all connected or relevant for other information before but when I try to install any application, even if it's free, a notification saying required audit: log view your billing information. When I login it takes me to the account settings. There, it says 'there is a problem of billing with a previous purchase. Update your payment method. "Moreover, the location of security code is empty. What should I do? Were not paid apps then all I have to do is put in the missing info? Help, please

  The message "problem with a previous purchase" implies that iTunes has not been able to collect money for your last purchase, and you must therefore to iTunes for it: pay a balance of the iTunes Store - Apple Support

  You will not be able to download anything else (including free items and app updates) until it is paid off. If your existing card is not accepted (the security code field will not display when you access then the payment details for card security reasons) you have another card to try, or iTunes gift cards available in your country to pay what you need?

• I have problems to install the Microsoft 2007 12 updates. They all invariably fail with the following message details: ___Error error: Code 8007006E___Any ideas on how I can fix this? ___I have Microsoft Vista.

  I have problems to install the Microsoft 2007 12 updates.  They all invariably fail with the following error message:

  Error details: Code 8007006E

  Any ideas on how I can fix this?

  I've got Microsoft Vista.

  Hi 1proudmama
  Welcome to the Microsoft Answers Forum!
  We would like to know are these updates on Office 2007

  I recommend the methods are:
  Method 1:
  Step 1:
  Uninstall the update failed, if she is found in the installed updates, follow these steps
  i. open Control Panel from the start menu
  II. Select programs and features
  III. click Show on the installed update.
  IV. uninstall the update failed
      
  Step 2:
  Reset the component of windows update and then try to install updates, check if the problem is resolved. It has Fix tool link below will help you with the same
  How to reset the Windows Update components: http://support.microsoft.com/kb/971058

  Step 3:
  Install the stand-alone package containing the updates. You can download the stand-alone version of the link with the number of KB below: http://www.microsoft.com/downloads and check if the problem is resolved.

  Method 2:
  Run the SFC (System File Checker) on the computer scan to fix system errors to the file on the computer.
  To run a SFC scan, follow these steps:
  Open an elevated command prompt. To do this,
  i. Click Start,
  II. click principally made programs,
  III. click Accessories, right-click command prompt,
  IV. and then click Run as administrator.
  v. If you are prompted for an administrator password or a confirmation, type the password, or click on allow or continue.
  VI. at the command prompt, type sfc/scannow and press ENTER. Once the scan is complete, restart the computer so that the changes take effect

  Below link for reference: http://support.microsoft.com/kb/936212

  Thank you, and in what concerns:
  Samhrutha G S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Boot problems after installing Vista SP2 (KB948465)

  I installed SP2 via update.  During the update process there was a power failure.  After that (I don't remember if it's immediately after, or if a few days elapsed) I had problems with the startup.  Initially, seemed the Startup Repair to fix the problem, but not permanently, and the Startup Repair had to be used repeatedly just to start.

  After a few times of what is happening, Startup Repair did not turn, and the PC wouldn't start.  After about 5 attempts using the decision-making power, sometimes choose the Startup Repair, sometimes choose to load windows normally, he did start.
  I immediately did a system restore to return my PC before SP2 was installed.

  After the restoration of versions prior to SP2, Windows Update showed that the SP2 update failed.  It was on 9 November.  As I need my computer, I didn't reinstall SP2 until I had finished this work.

  As I thought that the problem is probably caused by the power outage, on 10 September, I reinstalled SP2.  Windows Update show no SP2 as an available update, then I downloaded and installed the standalone update.

  Between the 10th and today, 14, Windows Update has installed more than updated.

  Today, I was unable to start for the first time since the reinstall SP2 and Startup Repair has allowed me to open a session.
  I tried to uninstall SP2 via update.  The first part of it seemed to work, but when it came to reboot, the PC stopped at the end power to the bottom of the procedure.  I used the power switch to turn the PC back on.  After startup, the PC told me that deletion failed.

  Then I tried the system restore.  Unfortunately, the first available restore point was post - SP2 installation.  I restored it for the point that is as close as I could.  I tried to uninstall SP2 again through Windows Update.  This time, I receive a generic error message immediately (less than a second) - it does not attempt to go through the configuration - restart the procedure.

  I haven't restarted my PC since then.  Most updates have been downloaded automatically, and the PC tells me that a restart is required.  I'm a little worried that I will end up with a completely insensitive PC.

  I use an Acer Aspire X 3200 with Vista home premium pre-installed.  I don't have a Vista disc.

  Hello, Alex

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• the application has failed to start because iertutil.dll is found noty. Re-installing the application may fix the problem.

  I am unable to download money or newdev.ll comes out.

  I also get this massage: the application failed to start because iertutil.dll is found noty. Re-installing the application may fix the problem.

  I have Office XP SERVICE3 PCs.

  Looks like its part of the internet explorer 6 or 7. If you are using IE6, (its out of date), download IE7 or install it IE8

• Problems to install Vista SP2, error 0x80070bc9

  Hi Mick Murphy, I can't install SP2, although it should have been downloaded automatically until I'm having some strange problems with my Vista so I'm trying to verify that this update is installed correctly.  As it has been dated to 2009, I do not remember exactly but think I had a problem and claimed a record that never came.

  Anyway your connection link see that as a mistake!

  I tried a reboot before reinstalling clean but KB948465 gets up to now and shows then I think a mess of Ox80070bc9 error (sorry, but I'm starting to get confused by all of this.)  I then read to use the KB947821 Hotfix but who wants to install both versions at the same time;  Thus abandoned that.

  Help!

  CAV

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Windows-Vista-Service-Pack-2/53ceaa00-e86c-4636-9e65-533af2a5974c#LastReply

  Hello Christina,

  Apologize for the delay in response. I suggest that you try to reset the Windows Update components by running the difficulty it as mentioned in the following article and see if it helps:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  If the problem persists, try the remaining steps in this article:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Note: The Chkdsk scan will try to identify and repair bad sectors on the hard drive. All the data on these areas could be lost in the process. The computer can also enter a no start condition.

  We know if you need help. We will be happy to help you.

• ;" The application has faild to start because MFC71D. DLL was not found.re - installing the application may fix the problem. »

  I'm trying to use my music software I installed recently in my computer I have get__the next message; "The application has faild to start because MFC71D. Mean what DLL__was does__that does not found.re - installing the application may fix the problem. »

  I tried to re - install several times, and I got the same results

  Hello

  This means that you can try to uninstall the software and then re-install.

  Click Start and Control Panel. Under programs, click on uninstall a program. Find your program in the list, right-click, and choose uninstall.

  When he finished, restart the computer. This will ensure that the system can get a grip on all the files will be released.

  Then download the program again and save the file to your desktop. When he finishes, right-click on the file and select "Run as Administrator".

  Let us know if this helps

  Mark <> Microsoft Partner

• I can't install (error says Windows Vista not supported (LR6), I use Windows 7 SP1 worms. 6.1 What is the problem?)

  I can't install (error says Windows Vista not supported (LR6), I use Windows 7 SP1 worms. 6.1 What is the problem?)

  About Vista, but is not https://forums.adobe.com/thread/1836232

• I have a problem after installing, I try to open applications, but I get an error message: "it is impossible to open it properly (0 x 0000022) application, click ok to close the application" anyone of you could help me? I paid the monthly fee

  I have a problem after installing, I try to open applications, but I get an error message: "it is impossible to open it properly (0 x 0000022) application, click ok to close the application" anyone of you could help me? I paid the monthly rate but I can not use any application due to this error

  Hello

  This link may help: the application failed to start properly (0xc0000022).-Microsoft Community

  Kind regards

  Sheena

• I have a problem with creative cloud applications is not to be downloaded or updated date on my i mac, current applications, I still have work. I uninstalled the cc application and re-installed but without success, in the apps tab there is no error code o

  I have a problem with creative cloud applications is not to be downloaded or updated date on my i mac, current applications, I still have work. I uninstalled the cc application and re-installed but without success, on the applications tab there is no code error only saying download error out area allowing you to charge applications call does not work... any suggestions?

  Hi James,

  Please follow the article: CC help | Download error in the applications tab of Creative Cloud Desktop Application to get this fixed number.

  Please let us know any questions.

  Thank you

  Yann Arora