Multiple distributions from a single source

Similar Questions

• Change a data area on all web pages from a single source.

  I need to change the data on all the web pages on a constant basis. How can I make a single source since Spry is no longer supported.

  Personally, if the server has installed PHP (most do so, but check with your host), I would use a server side include: Server Side Includes > Introduction

  That would allow you to edit and upload a file, the server would then add the information in this file to your pages anywhere where you add the code of tiny include.

• Different sizes of files when copied from a single source and pasted to another

  Hello

  I hope someone can help me understand why a file size can be different when it is copied from one source, pasted on another hard drive or on an external drive?

  My job requires me to backup databases to an external source before making changes to a program / database to protect the info before any troubleshooting begins / changes are made. These databases can be several GB in size and take a relatively long time to copy depending on the size and the transfer speed, but when I compare the properties of each folder, after that the copy is often made that the sizes don't match exactly. Remember the difference may be that some Ko Mo, but nevertheless, this could represent information data, planning data or image data that must be preserved. Can someone explain why/how it happens and if it is a way to ensure an exact copy is made every time so I don't have to go back and make a second or third attempt to copy files on?

  Thank you

  David

  David

  Happy to help (its why do I volunteer here)

  Copy/paste and drag-and - d├⌐poser are no error checking.  bad, bad bad.

  A file that takes up 100 MB exactly on a 500 GB HD with 4 k sectors will not take the same place on a 1 to Hd with 8 k sectors.  There may be a slight varience between the two due to the size of area if for example the las, bit of info (it could be as little as 1 byte) is placed in an 8 k sector it will often say he used throughout the sector.

  Since there is no apparent error checking if a network problem deletes the data it is not copied.

  Same with ram

  You can always google something like checking with file transfers in win 7

  For an example of an application with error checking check this a https://codesector.com/teracopy (there are dozens)

• My message is scrambled from a single source. How can I find the view menu so that I can adjust the encoding?

  
  

  You can press the ALT key, or press F10 to display the Menu bar

  • https://support.Mozilla.org/KB/what-happened-to-the-file-edit-and-view-menus

• split multiple files from a single file in files(xml's) individual

  Hello
  I have a file (.txt) of newspaper which has all the inputs and output xmls as well as a few other details of the server log, I want to use it as an entry, and then to hold the input files required, say 50 xmls in the input message unique and 50 xmls of output messages that is unique to root element is the element root ignoring the unnecessary data.
  
  as:
  input and output xml will have the standard root as < input > elements < / input > and < output > < / output >.
  
  Thank you.
  
  Published by: user12679330 on May 15, 2013 22:52
  
  Published by: user12679330 on May 15, 2013 22:53
  
  Published by: user12679330 on May 15, 2013 22:53

  import java.io.BufferedInputStream;
  import java.io.BufferedReader;
  import java.io.BufferedWriter;
  import java.io.File;
  import java.io.FileInputStream;
  to import java.io.FileNotFoundException;
  to import java.io.FileOutputStream;
  import java.io.IOException;
  import java.io.OutputStreamWriter;

  import java.util.StringTokenizer;

  public class ExtractXmls {}

  Public Shared Sub main (String [] args) throws FileNotFoundException,
  IOException {}

  ("String data = readFile("C:/MyFolder/DataFile.log ");
  String startData ="<>

  StringTokenizer stk = new StringTokenizer (data, startData);
  int count = 0;
  While (stk.hasMoreTokens ()) {}
  String token = stk.nextToken ();
  Count ++;
  }
  System.out.println (Count);
  EndData string = "";
  int start = data.indexOf (startData);
  int end = data.indexOf (endData);
  end = end + 5;
  int i = 1;
  While (i< 5000)="">
  String fileData = data.substring (start, end);
  System.out.println (BancsData);
  data = data.substring (end);
  Start = data.indexOf (startData);
  end = data.indexOf (endData);
  end = end + 5;
  createFile (fileData, i);
  i ++ ;
                   
  }

  }

  private public static void createFile (String, int count data) {}
  FileOutputStream fos;
  try {}
  FOS = new FileOutputStream ("C:/target/output/file" + count + ".xml");
  BufferedWriter BW = new BufferedWriter (new OutputStreamWriter (fos));
  BW. Write (Data);
  bw.newLine ();
  BW. Flush();
  Count ++;
  } catch (Exception e) {}
  Generative TODO catch block
  e.printStackTrace ();
  }

  }
       
  private static String readFile (String path) {}
  StringBuilder sb = new StringBuilder();
  try {}
  = New File (path);
  FileInputStream fis = new FileInputStream (file);
  Bis buffer = new BufferedInputStreamfis();
  int = 0;
  char inChar.
  {}
  in = bis.read ();
  inChar = (char);
  If (in! = - 1) {}
  SB. Append (inChar);
  }
  } While ((dans! =-1));
  bis. Close();
  } catch (FileNotFoundException exception) e {}
  e.printStackTrace ();
  } catch (IOException ioe) {}
  ioe.printStackTrace ();
  }
  Return sb.toString ();

  }

  }

• "Single source to multiple targets in the Oracle XSLT Mapper"?

  Can someone provide examples for the single source to multiple targets in Oracle XSLT Mapper scenario

  You can have several sources, but target the single node in an XSLT mapping.

• Update multiple columns from multiple tables in a single UPDATE request

  Hello

  I'm trying to figure if I'm heading in the right direction.

  I want to update multiple columns from multiple tables in a single UPDATE request. Also, I would like to update multiple columns in a table from the tables.

  Scenario 1

  UPDATE Table2, Table 3
  SET T2.Column1 = T1.Column1 
  ,T2.Column2 = T1.Column2
  ,T3.Column2 = T1.Column2
  FROM Table1 T1, Table2 T2, Table3 T3
  WHERE T1.id = T2.id
  and T1.id = T3.id
  
  

  Scenario 2

  UPDATE Table3
  SET T3.Column1 = T1.Column1 
  T3.Column2 = T1.Column2
  ,T3.Column3 = T2.Column3
  ,T3.Column4 = T2.Column4
  FROM Table1 T1, Table2 T2, Table3 T3
  WHERE T3.id = T1.id
  and T3.id = T2.id
  
  

  Hello

  For scenario 1, you must write separate instructions UPDATE table2 and table3.

  To guard against someone else change one of these tables while you act so you can copy all relevant data in a global temporary table and update this global temporary table table3.

  ENGAGE only when two tables have been changed.

  You can write a procedure or an INSTEAD OF trigger to do all this.

  For scenario 2, you can reference many tables that you need when new table3.  It might be more efficient and simpler to use the MERGER rather than UPDATED.  For example:

  MERGE INTO table3 dst

  WITH THE HELP OF)

  SELECT t1.id

  t1.column1

  t1.column2

  t2.column3

  t2.column4

  FROM table1 t1

  JOIN table2 t2 ON t1.id = t2.id

  )             src

  WE (dst.id = src_id

  WHEN MATCHED THEN UPDATE

  SET dst.column1 = src.column1

  dst.column2 = src.column2,

  dst.column3 = src.column3,

  dst.column4 = src.column4,

  ;

• Is it possible to have a block of text from an external source (ex. TextWrangler file) load in multiple pages (file TW exodus as an "insert" in 4 different pages on a site)?

  Is it possible to have a block of text from an external source (ex. TextWrangler file) load in several pages on a site in the 'performance' (e.g. TW file as an "insert" in various pages)

  Use SSI. If you're on a PHP server just use the PHP include, if not take a look on SSI: the command Include

• Conditional marking, a single source and reduce the size of the project

  Hi all

  I use RoboHelp 10, and trying to find a solution to some of the problems addressed in the draft I am trying, as:

  1. The RoboHelp project that we are working on is pretty important. As a result, generating output takes a long time. WebHelp output takes more than 15 minutes at times, while the PDF output gets stuck, and in the end, we need to cancel it. We have some sections in our project, which are widely used by all authors. If we do not want to divide the project into several projects of the children and then merge again as this would mean the unequal distribution of work among the members of our team. How can we reduce the size of the project to increase the efficiency? Is this something to do with file corruption or the number of pages?
  2. We use two separate projects for CS Help and WebHelp. We also plan to label conditional content WebHelp for CS project, so that we can create the help CS and WebHelp by using single-sourcing. One solution that I think might work is to create a new table of contents using CS in the project of WebHelp and generate the output labeled. To try it out, it didn't work well. Also, can I use a different style sheet for WebHelp and CS Help? If so, any suggestions as to how I can do?

  I'd appreciate it really all the help of all the experts here.

  Thank you

  RA

  Thanks for the additional info, Rachael.

  Regarding, "exclude no referenced topics of output", something to keep in mind that several output formats will include topics that are not explicitly listed in the table of contents. If this checkbox allows to exclude topics that you have not otherwise referenced.

  However, another approach uses conditional build tags that are applied to the topic-level.

  For example, your 2,000 pages assume a large part of those who did not appear in the table of contents, but you want a handful of reference pages available through the function of Research . Follow these steps:

  1. Create a conditional build tag along the lines, "Exclude all."
  2. In the list of subjects, select all, right click and choose Properties.
  3. On the Advanced tab, check your box exclude everything ,... .tick once... and then wait for RoboHelp update (it will be a long wait for 2 000 subjects.
  4. Once you have a visual confirmation that the box is checked, click OK to close the dialog box. Still, there is a lag.
  5. In your table of contents, right-click on each chapter and use shortcut keys [y + n] to access conditional compilation tags.
  6. For each chapter, in turn, clear the exclude from all check box. There will be a slight shift by the number of topics in each chapter.
  7. In the list of topics, find the topics that, if they are not in the table of contents, you want to be compiled with the project. Clear the checkbox to exclude everything for each one.
  8. In the conditional build Expression for your project, make sure your tag exclude from all in the column exclude output .

• How to create multiple hierarchies from the same physical table

  Hi all
  
  I have a physical table to join with a fact table: there are 3 different hierarchies, which share the last 2 levels inside the dimension table. It's the logic diagram of hierarchies:
  
  Dimension services
  -Business
  -Sector
  -Type
  -Operator
  -Product
  Partner of dimension
  -Partner
  -Operator
  -Product
  Contractor of dimension
  -Contractor
  -Operator
  -Product
  
  All columns are in the same table physical source. I tried to create 3 table logic source from the same physical table, everyone with all the columns and create a hierarchy for each dimension table, but it gives me nQSError: 15011.
  
  Any suggestion? Maybe the physical table alias can help for the creation of tables of different sizes?
  
  Thanks in advance,
  Concerning

  Hello

  It is a basic rule that you cannot create multiple hierarchies in a single dimension table, so what you do is create three tables of alias and slip into MDB layer in 3 different sizes and on top these tables create 3 different dimension hierarchies.

  Check if useful/correct

  Thank you.

• scanning multiple pages to the single PDF using HP ENVY 4500

  The guide says scan of the computer (as opposed to scanning from printer).  I do that and still can't scan multiple pages into a single PDF file.  Is it still possible?

  Hi griff0530,

  I understand that you want to scan multipage documents into a single .pdf file using your HP Envy 4500, yes it is quite possible.  When you use the HP software on your computer, follow the steps below:

  1. loading the document.

  2. click on scan . An overview of the analysis is displayed (by default).

  Important : the Preview Scan function must be enabled for scan multiple pages into one file documents. Additional pages from the original are added for the single file in the Scan preview window.

  3. in the scan preview is displayed, do one of the following actions:

  Click the sign Plus () on the left side of the window to scan additional pages. If you do not use an ADF, you must load the next page of the document on the glass of the scanner to add to each additional page.

  4. click on Save to capture the scanned file, but leave open the HP Scan.

  5. click on done to capture the scanned file and close HP Scan.

  I found this great information here: how Scan: Windows 7

  If you are using any other operating system, it's ok the same steps apply. I hope that's what need you!

  Thank you

• HP Officejet Pro X476dw (nextworked-Windows 7 Pro) how to scan multiple pages into a single file?

  Does anyone know how to scan multiple pages into a single jpegfile?

  When you scan a document of several pages in a file on a network each page gets its own jpeg image scanend file.

  HP standalone scanner allow generally allows you to add the multuple scans in a jpeg file.

  Any help much appreciated!

  Thank you

  Joihn

  Hello

  Well, I don't know how you can read many jpeg files into a SINGLE file. Put scanned images in a folder is a logical way to keep them in one place. From my understanding single jpeg image may be a ONE page document, but many jpeg images cannot be concatinated to be a multiple page document. We can use images, software publishing to put them in a single document, but still only one page (each image is smaller). Using pdf output, you can concatenate/merge a lot of images in a sinlge multi-page file.

  Kind regards.

• HP Envy printer 4501: HP Envy 4501 scan multiple pages into a single document

  My HP Envy 4501 printer won't let me not scan multiple pages into a single pdf document.

  I already made sure the box 'Create a separate file for each scanned page' is unchecked under the section of the file in the advanced settings .

  After I scan the first page, I do not get a screen with a + (plus sign) which is supposed to allow you to scan additional pages in the same document.

  Is it possible that I can get a fix/update my HP Envy 4501 printer software which would show the screen with the + (plus sign) which allows to scan additional pages in the same document after the first page that you scanned?

  At this point, if I don't get this problem fixed soon, I'm about to return my HP Envy 4501 printer to the store I bought so I can get my money back and buy a printer from one of the competitors of HP before my store warranty runs out.

  I am very displeased with the printing software HP, support services and web presence that does not work half the time.

  Thank you

  Mark

  Hello

  Lower the resolution of scan equal or lower to 300 DPI, scanning multiple pages is supported only on lower resolutions.

  Any higher resolution will not add additional pages.

  Shlomi

• HR 11 cmd line: error: impossible to analyze all project files.  Unexpected error: failed to prepare a single source

  Hello

  I am running RH (installed in Program Files x 86) 11 on a Win 7 (64-bit) machine.  I just created a new project with a lot of folders/subfolders and a single topic welcome.  This project compiles fine using the RoboHelp interface.  However, when I run RHCL from the command prompt, it refuses to start.

  Here are the details of the order and the results:

  from c:\Program Files (x 86) \Adobe\Adobe RoboHelp 11\RoboHTML

  c:\Program Files (x 86) \Adobe\Adobe RoboHelp 11\RoboHTML > rhcl 'c:\knowledgecenter\knowledgecenter.xpj'-l 'WebHelp '.

  Adobe (R) RoboHelp version 11.0.4.291 Project command line compiler

  Copyright (C) 2006-2007 Adobe Systems Incorporated and its licensors. All rights reserved.

  Project: c:\knowledgecenter\knowledgecenter.xpj

  Layout: WebHelp.

  Output:! SSL!\WebHelp\Index.htm

  Scanning for the compilation project...

  Error: Impossible to analyze all project files.  Please use RoboHelp to recover the project.

  Unexpected error: failed to prepare the data of the single source for RHCL. Please try to compile in RoboHtml.

  I tried deleting the cpd and the project from the hhp file - has not made a difference.

  Help!

  Thanks in advance,

  Claudia

  Thank you.  What I discovered yesterday, it was that after the project SVN on my local machine to test the command line build process, somehow some of the FPJs was missing!  Because the folders containing the missing FPJs were empty, I guess GUI HR could ignore and compile correctly.  It turns out that I have somehow missed tried all FPJs in source control.  Once I got all the archived FPJs, when I refresh svn at the local level, the construction of the command line worked well.

  Kind regards

  Claudia

• How can I use images of a single source in the text?

  I use RoboHelp HTML 11, and I want to use images from one of the icons in the text source, so that I can update the source image, if necessary, and all instances of the image are updated automatically. The look is as follows:

  

  I tried extracts, but they force a paragraph return in the text that I don't want.

  I tried to insert the code source of an image in a variable, but when I inserted the variable in the text, I got an error message in the text.

  Is it possible to use variables to do this or another method?

  Thank you.

  According to me, inserting an image and selecting where the image is stored would be single-sourcing. Then when you update this image, it is updated throughout.

  Insert > Image

  (I use HR 10.)