multiple selection of data to create protection groups store

Similar Questions

• Settlement data based on multiple selection ListBox reference need help

  Hello again,

  The question that I have is selecting from a listbox with multiple selection to fill the tables with the selected data. My code is as follows:

  Void loadData_EventClick (ByRef This)

  Dim j

  Dim k

  k = 0

  If ListBox.MultiSelection.Count = 0 Then Exit Sub

  For j = 1 To ListBox.Items.Count

  If ListBox.MultiSelection (j). Count = True Then

  k = k + 1

  End If

  Next

  TextBox.Text = k

  End Sub

  The code works perfectly up to the second if statement. My current channel group list contains 16 channels and with the second if statement guided the textbox output is equal to 16 (i.e. k = 16), which is what I expected. Im just using the k = k + 1 for the test. Eventually will be replaced by operating code specific to what I need to do.

  So the question that I have is to get the code to recognize what values are selected and referring to the index for the selections in a table. Im not sure on how to do it.

  Any help is very appreciated.

  Thank you

  ~ Nathan

  Attached JPEG shows the current user interface and the output of k with the second if statement commented

  Hey Nathan--

  ListBox.MultiSelection () is a function that returns an array of [multiple] selected items in ListBox.

  ListBox.MultiSelection.Count is a property that returns the number of items in the table above.

  Therefore, the logic in your second IF statement that says if ListBox.MultiSelection (j). Count = True really makes no sense because:

  1. The array returned by the multiple selection (using (j) indexing now refers to a single selected item in the list (which has not its own 'Count' property)
  
  
  2. If you don't the array index, assuming that you had selected 4 items in your list, your statement would still be actually as said if 4 = True which is not what you get.

  Make sense?

  Here is a modified version of your code that I hope makes it a little more obvious how these elements relate to one another.  Give it a run; of course, 75% of the code is extranneous to you working end to account, so make sure that you subsequently delete what you won't need.

  Sub loadData_EventClick (ByRef This) ' creates the event handler
  
    Dim j
  
    If ListBox.MultiSelection.Count = 0 Then Exit Sub
  
    TextBox.Text = "Total ListBox items:" & ListBox.Items.Count & + "" \n "".
  
    TextBox.Text = TextBox.Text & "Total selected items:" & ListBox.MultiSelection.Count & + "" \n "".
  
    TextBox.Text = TextBox.Text & "Selected Items:" & + "\n"
  
    For j = 1 to ListBox.MultiSelection.Count
  
      TextBox.Text is TextBox.Text & ListBox.MultiSelection (j). Text & ", index" & ListBox.MultiSelection (j). Index & + "\n"
  
    Next
  
  End Sub

  You are making great progress; It will get quickly easily faster and we are here to help – do not hesitate.

• Help with POST data if multiple selections are chosen

  I created a form with a menu (list) which includes all 50 States. I used the MESSAGE option, as well as PHP, to treat form data, which will be sent to me. The list menu looks like this: http://askdave.info/help/states_menu.gif and I have "Allow multiple selections" checked in the property inspector.
  
  If the user chooses several States, I want EACH of these States to be included in the email that I receive. Right now, if I check several States, I get only the latest state selected. For example, here is the email that I get after I check 5 different States. http://askdave.info/help/FormData.gif
  
  Problem-> in this email, only one State is indicated (Hawaii), even if I selected 5 different States. How can I get the data from the form to list all THE States that are checked?
  
  Here's what I have:
  
  < form name = "form1" method = "post" action = "process.php" >
  < input type = "hidden" name = "required" value = "name, phone, email, States, capital" / >
  
  And then for the menu that lists the States, I have:
  
  < label >
  < select name = 'States' size = '7' several id = 'States' >
  all States < option > < / option >
  Alabama < option > < / option >
  Alaska < option > < / option >
  Arizona < option > < / option >
  Arkansas < option > < / option >
  
  and so on...
  
  What Miss me? How can I get the PHP script to send multiple values, if multiple values are selected? (I'm new to PHP, so go easy on me.) I can post my code, if necessary.) Is this a PHP problem, or do I have to add something to the HTML form?

  Hello

  >>
  I think that DynaForm is synonymous with dynamic form
  >>

  This makes some sense ;-) I was wondering just because there is a pre-made script called DynaForm here, but it has a different 'Logistics' than yours.

  However, both "DynaForm" versions are pretty basic, because they deal only with non-multiple values - fields as a single line, texareas and select´s non-multiple of form input fields. Your script for example just loops through all the existing form fields using the method "foreach":

  Out of form fields and values.
  foreach ($this-> post as $field-online $value) {/ / loop through all form fields}
  If ($field == "required") continue;
  $this-> _addLine ($field, $value); Here´s where the field´s name/value consolidation happens
  }

  .. .and simply includes a 'value' with his 'name' associated field´s. The problem is: this method works, simply to have only 1 value - but any 'multiple value' form fields (for example your 'States' select or check box groups who spend several values as well) require a separate "foreach" in the script treatment, fields and this hasn´t been incorporated here.

  That said, I would suggest using another solution pre-made as PHP Form Mail script that s capable of managing your multiple values - scenario naturally.

• Add the data in a field of multiple selection?

  Just got got off the phone with the support of Eloqua ask about the possibility of adding data in a field of multiple selection over time. Apparently, it's possible through mailings of form, but no list will be mailed.  Wouldn't be great if during a download list, you had the ability to add data from a field in your file .csv for existing values in this area in Eloqua.  Here's a use case for this scenario... in our society of industry can be part of multiple market segments.  Depending on the event, a person can feel they are part of the market segment 'Radar', but another event specializing in Sonar... they indicate that they are part of the market segment "Sonar", both being true.  There is currently no easy way to enter these data in Eloqua over time as part of the downloads from the list.  Based on the scenario above, the existing value is 'Radar', but if "Sonar" is the value of the field for the next download it replaces the value of 'Radar '.  Ideally, we would be able to capture the two values.

  I said that if there is enough interest in this idea, Eloqua would consider developing a new option for downloads from the list add vs crush.  I hope others can find a use case for this idea.

  Hi Tina,

  I know it's a bit old but I had a simular problem on adding values to a multi select.  Here's how I approached it.

  1. Add a text based contact field Eloqua to transfer your csv values.  Let's call it "MultiSelect download Value" for this example.

  2. Add Eloqua add values to a multiselect contact field.  What we'll call "MultiSelect Final.

  3. create a program that will add the download list.

  4. in the program, create a step to update Contact data

  . in the update rule, update "Definitive MultiSelect' field, Append the value in the field value, value will be hardcoded, check use a delimiter": ", marks the conditional rule the field" value to download MultiSelect "equals the value hard coded or one that you would like the field to be.

  b. create all update settings you need for your data.

  I approached this way because our downloads from the list should be add the data over time.  The field ' value to download MultiSelect ' allows it to be overwritten on each download.

  Let me know if you want more details.

  Thank you

  Blake

• Is there a way to multiple selection data source in a Web App?

  I created two Web Apps. I'm trying to multiple selection of one of the lists.

  The idea is - I have a list of manufacturers and a list of distributors, a few hundred in each list. I would like to be able to set up a select field type 'data source' Web App Distributor and for that to be a function of multiple selection.

  Does anyone know how to do this?

  Web apps are only a 1 to 1 relationship, BC at this time doesn't support 1 to many, or many-to-many on web applications. If you can't sorry.

• No VMs are displayed in the create a Protection Group Wizard

  Hello

  I want to test a recovery plan and I (hopefully) set up correctly.

  The two sites are connected and I set up the Mappngs, the records, the Placehoders and networks etc.

  I had a failure with a Protection Group who had no VMs in it.

  And that is the problem.

  When I go to create a Protection Group (with RSV) I don't see any virtual machines listed.

  My VMs are sitting on a Lun on the production side and this Lun is mapped to a logical unit on the recovering Site number.

  The LUNS are Openfilers

  Can someone tell me why I can't see the virtual machines or elsewhere the Lun?

  Is it because the logical unit number is Openfiler?

  This is my first time out of MRS so don't have a lot of experience with that.

  See attached PS

  Thank you very much

  Patsfan

  Have a look here for the installation of the replication of vSphere step by step and configuration with SRM: installation 5.1.1 SRM & amp; vSphere replication & #8211; Part 2 | VMFocus

• How to select the data that meet multiple criteria

  name load_date
  -------- ----------------
  Smith 11/02/2010
  John 01/10/2009
  Cindy 03/04/2010
  Smith 03/10/2010
  
  
  I want to select all names including load_date exist in February AND March.
  
  Expected results: -.
  
  Smith
  
  I can use the intersect operator to get all the names that were given in February AND March by using the following query.
  
  Select the name of the table where to_char ("load_date, ' FMMonth YYYY") = "February 2010"»
  intersect
  Select the name of the table where to_char ("load_date, ' FMMonth YYYY") = "March 2010"»
  
  
  Y at - it an easier way to retrieve the same data that is similar to the use group by, having cluase etc?
  
  Thanks in advance.

  Hello

  You can do it in one pass through the table with GROUP BY and HAVING:

  SELECT       name
  FROM       table_x
  WHERE       load_date     >= DATE '2010-02-01'     -- First date inside target range
  AND       load_date     <  DATE '2010-04-01'     -- First date OUTSIDE target range
  GROUP BY  name     -- not TRUNC (load_date, 'MONTH')
  HAVING       COUNT (DISTINCT (TRUNC (load_date, 'MONTH')))     = 2
  ;
  

  Try to keep the columns indexed by themselves in comparisons; in this way, you can use indexes.
  For example, if there is an index on load_date, then the above query could use, as load_date is only on one side of the > = or<>
  A similar State

  where   to_char (load_date, 'FMMonth YYYY') = 'February 2010'
  

  cannot use an index on load_date, because we do not compare load_date - we compare the results of TO_CHAR (load_date,...).

  Published by: Frank Kulash, April 13, 2010 16:44
  Fixed GROUP BY clause

• Query output to multiple selection data

  I am trying to output the name of the person and the Organization to which they belong. A user can belong to more than one org and org may have multiple users associated with them.
  
  I have a table of user with user_id, username_txt, password_txt user_org_id fields
  a table of org that has org_id and org_cd
  a user_org table that has a user_org_id, user_id and org_id
  This is how I create the relationship between users and organizations.
  
  I'm trying out the name of a person and a multiple selection box that has all the orgs that is assigned to a user selected. but the form is to select only a single organization. How can ensure me that the selection box shows the user orgs selected?
  
  I think I have to do some kind of loop or something else to get all values - I don't know what to do. any help would be appreciated. Thank you!
  
  See my code:

  With the help of a multiple selection with pre-selected items makes it very easy for users accidentally deselect things.

  But, if you insist, change this:
  SELECTED
  to do this:
  selected = "selected".

• Display multiple lines of data collection defined by the user in an e-mail message

  I created a collection defined by the user that displays several lines of data. I created a custom rule and have linked this collection set by the user to this rule and configure an e-mail action. Variable Seveity, I have defined it in the rule to contain the column values. But it will only contain the first line of data. How can I display multiple lines of data in the alarm itself as well as the e-mail? Any help is appreciated.

  The example query in the collection defined by the user is less;

  Select the type, status, queuename, count (*) from PSAPMSGPUBHDR

  Union

  Select the type, status, queuename, count (*) from PSAPMSGPUBCON

  Union

  Select the type, status, queuename, count (*) from PSAPMSGSUBCON

  Result:

  Number of status type Queuename

  -------                 ----------------------                        ----------                           -------------

  HDR profil_utilisateur error 1

  PUB                  PERSON_BASIC                    New                                 4

  PUB WORKFORCE_SYNC error 1

  -3 rows

  I have defined the variables of gravity and the alarm message is something like this; (It is fetching only the first row of data) how do I loop through to get all the rows of data and display it in the message of alarm/email (alert) action must be written of the groovy script code to achieve this goal? If Yes can you please provide me examples?

  Alarm message:

  "Request message queue is:

  Type: @UDC_type

  QueueName: @UDC_queuename

  Status: @UDC_status

  County: @UDC_count

  Thanks in advance

  JAI

  Hi Jay,.

  fine I could help you. Please mark the thread as "Answered" when the issue has been resolved and do not hesitate to open a new thread for questions.

  Concerning

  Jochen

• Need to field multiple select the option without having previously selected deleted

  Hi all

  Request Express 4.1.1.00.23

  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production

  I have a requirement of adding a field of multiple selection to a single screen, and I added the list to multiple selection, without a second thought. Of course, the question is when a user tries to edit a record, click on (with the CTRL key) two options in the selection list multiple, but not clicked on those previously selected, then we lost them. Then I thought to create checkboxes and thus those already selected will be always checked when try to update.

  But I want to do with the multiple selection field. So I was wondering if there is a way?

  Thank you!

  Sam82 wrote:

  Request Express 4.1.1.00.23

  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production

  I have a requirement of adding a field of multiple selection to a single screen, and I added the list to multiple selection, without a second thought. Of course, the question is when a user tries to edit a record, click on (with the CTRL key) two options in the selection list multiple, but not clicked on those previously selected, then we lost them. Then I thought to create checkboxes and thus those already selected will be always checked when try to update.

  But I want to do with the multiple selection field. So I was wondering if there is a way?

  This is the behavior expected multiple-selection list. It can be changed using a point hidden shadow and JavaScript, but there is no way out of the box to achieve what you propose.

  Selections several lists are usually a bad idea:

  • Users do not know how they work
  • They are confused and source of errors, except if all options are visible (which generally wastes space UI)
  • The resulting values of treatment is problematic
  • They are often the cause of a model of incorrect data or result

  Checkboxes or a shuttle are much better options and controls for multiple choice options.

• Protected groups

  Hi all

  I have a doubt in the creation of group protected.

  Can we create two groups protected virtual machines in the same data store.

  Thank you

  Malar

  Plan of stimulus can contain several Protection groups and protection group can appear in several recovery Plans.

  I don't understand the following sentence:

  I'll be able to place server 1 recoovery plan 2 also, to simply check the pulse of the server so that I can confirm this server 2 will rise properly.

  Michael.

• How to format the data to a custom group

  Hi all
  
  I have a PivotTable with actual expenditures and Budget as some accounts and columns in the rows. Since I'm on the hierarchical column of account, I created custom groups for accounts using the component stages of selection. For example, I created a new group called Profit to combine 3 different accounts of profits and display a result row.
  
  Now I want to format the data for the group to profit. I right-click on the Profit Group, choose to change the Group and click the Format button on the lower left corner. I add a shape, for example the borders. When I now discover the PivotTable, borders have been applied to the label of the group, so the word Profit is now defined. However, the values in the columns of actual expenditures and Budget have not a border. Don't know what Miss me, but I want both the group label and the values to be formatted in the same way.
  
  How can I formatting the data values for the custom group?

  Hi user,

  Expected behavior, it won't format the actual values and the Budget. Only the group will be formatted.

  Kind regards
  DpKa

• Make multiple selections by comma delimited

  I'm pretty new to APEX and I'm trying to create a multiple-selection list box. I am able to create the list box, and when I look at the session variable values are separated by a colon. Is it possible that I can have these separated by a comma if I can do something like this
  
  
  SELECT THE EMP
  From emptable
  where empid in (: emp)
  
  Thanks for your help.

  I don't know if this will help, but if you have Oracle 11 g R2, you get this:

  SELECT  LISTAGG(empid, ',') WITHIN GROUP (ORDER BY empid) AS employee_id
  FROM   employees;
  
  Result:
  
  1000,1001,1002,1003
  

  Published by: Vitor Rodrigues on 17 Feb 2012. 17:15

• Insert the values of multiple selection

  Hello
  
  I have a list of multiple selection on my page and I want to insert this list in my database. Now, I want to create a new line for each of the selected values. My table has three rows. ID, GET_ID, PAR_ID. In my page, you can select the GET_ID. Then you have a list of multiple selection for PAR_ID (here, you choose more options). Now the script should put in the table so the format looks like this:

  ID        GET_ID      PAR_ID
  1         1               1
  2         1               2
  3         1               3
  4         2               1
  5         2               2
  
  etc..

  When I use the automated process of line it will insert the data as PAR_ID 1:2:3 and this isn't what I want. I think I must create a PL/SQL procedure with a loop, but my knowledge of pl/sql is not very good. If anyone can put me in the right direction?
  
  Kind regards
  Wijnand

  Hello Wijnand,

  I did sort of like this:

  DECLARE
  l_selected APEX_APPLICATION_GLOBAL. VC_ARR2;
  whole i_exists;
  BEGIN
  --
  -Convert the string two points separated values in
  -a table of PL/SQL
  l_selected: = APEX_UTIL. STRING_TO_TABLE(:P1_MULTISELECTLIST);

  --
  -Loop through the array to insert
  --
  BECAUSE me IN 1.l_selected.count
  LOOP
  SELECT count (*) in i_exists
  TABLE
  WHERE TABLE_PK = l_selected (i);

  IF i_exists > 0 THEN
  null; -DO NOTHING
  ON THE OTHER
  INSERT INTO TABLE (...) values (...);
  END IF;

  END LOOP;
  END;

  BR, Paul

• How to get the multiple layers of data

  Hello

  I imported two jpg files into a single composition. Please follow this procedure...

  1 created a composition, say his name testCompo

  2 imported a file1.jpg in the file-> Import-> file draft

  3 imported a file2.jpg in the file-> Import-> file draft

  4. drag the two files, file1.jpg and file2.jpg, in the testCompo

  Now, I have two layers (it is file1.jpg and nested are file2.jpg) in my testCompo. How can I get the information in pixels or pixel data of the

  the two images (IE, I mean layers).

  I knew that params [0]-> u.ld is the first data layer in

  () EntryPointFunc
  PF_Cmd cmd,
  PF_InData * in_data,
  PF_OutData * out_data,.
  PF_ParamDef * params [],.
  PF_LayerDef * output,
  void * extra)

  So what about other data layer? Then, finally how can we get the multiple images/layers data in AE?

  Thanks in advance!

  It's the thing.

  You must have a param layer (let's say it's param number 3).

  Use this param to select any layer of the model.

  Now you checkout param 3.

  what you get is a paramDef structure containing the pixels of the layer 3 Advanced param to.

  you will find this information at:

  paramDef-> u.ld.data (or something close to that. I do not have in front of me)

  This way the jpg1 affect can get jpg2 pixels and jpg3. any layer in the comp.