Multiple sessions to the same connection?

Similar Questions

• 3070 connectivity problem - multiple Accespoints with the same SSID

  Hi all

  I have a problem with my printer HP Deskjet 3070 printer all-in-one.

  I have 2 accespoints with the same SSID for better coverage of the pit of the wireless home network.

  For some reason any my HP printer keeps losing wireless connection when the 2 accespoints are rising.

  I use a different frequency for the 2 accespoints channel and it works fine with all other wireless devices.

  I did that a DHCP are used, r, but in fact it doesn't matter because the printer uses a static IP (192.168.0.3)

  When the two AP is the printer loses wirelesss connectivity. (The blue led will blink)

  If I take one of the accespoints offline, the printer becomes available.

  Is this a problem on my end or a problem of software/firmware printer?

  Kind regards

  -eth0

  Lol this is not very clear to me?

  But it is very good that we continue here:

  http://h30499.www3.HP.com/T5/printers-DeskJet/3070A-connectivity-issue-multiple-Accespoints-with-the-same-SSID/TD-p/5865699#.UKNyiYatlI1

• Can you connect multiple NetStreams to the same peerID?

  Does make sense to have two separate netstreams that are connected to the same connection remote p2p?

  I think I want to separate the audio and video editing and playing so well I can grant permissions (e.g. publish audio but not video for some users, but not others).

  Similarly, there are problems with two distinct NetStreams on the same edition p2p connection?

  Initially, I thought it would be possible, but I have problems to read workflows when connecting users on different ip addresses.

  You can play or publish as many streams as you want on the same connection. The mind just the bandwidth.

  However, audio and video edition on different waterways may not be a good idea because they are sure to be out of sync.

  To save bandwidth and play only the audio of a stream receiveVideo audio/video set NetStream false.

  Alternatively, in your scenario of fine-grained permissions, you can publish a stream with audio only and the other with audio and video. Data rate a bit redundant but audio is small and can be worth it.

• 2.1 EA 1: open multiple worksheets-SQL with the same connection

  Hello
  
  I usually open a couple of SQL blank worksheets for the same connection. 1.5 when I chose my default connection for all others (just click the worksheet and create a new one for this connection). In 2.1, I have to select the connection again and again which is difficult when you have 20 connections various some very similar for the development, test, production. So, we get errors on the false connection.
  
  Here have 1.5, default features the first connection selected.
  
  Thanks, Jürgen

  Connected the Bug 9000801 - ea1: otnforum: spreadsheet Launcher does not remember the last/default connection
  -Rambeau

• Firefox does not work for multiple instances of the SAME user account on Windows Multipoint Server 2011

  We have a PC HP of MulitSeat MS6200
  It runs Microsoft Windows MultiPoint Server 2011 (which seems to be a twisted version of Windows 7)
  It is implemented in a laboratory of computer science and students connect you using their account for shared room - IE multiple instances of the same user accounts are currently running on the PC at the same time.
  The first student to run Firefox can work with it without a problem.
  However, when another student try to start firefox they get the following message:
  Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

  Cannot start Firefox using a profile that is already used by someone else.
  Each Firefox instance needs its own profile or you will get this error message.

  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox
  • http://KB.mozillazine.org/Bypassing_the_Profile_Manager

  Use-no.-line switch remote control to open another instance of Firefox with its own profile and to different instances of Firefox running concurrently.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• Multiple accounts with the same email

  I have an account I can not connect to after my daughter it has disconnected. I tried to reset the password, but I get an email on my account to other girls: S (same email)
  I guess I have 3 accounts with the same email, but only the latter can created recover!
  Not even my main Skype has a chance

  I'm not 100% sure but it is most likely that I used the same email to whoever I have to reset - what can I do?

  In fact, this morning I managed to log on to the account of an iPad without frills but the pc refuses to sign ^ ^ ^? "Skype cannot connect" - what is happening?
  
  I also discovered that I could connect via a browser, but not via the Skype program... So I uninstalled and installed again and it's working now...
  I've now changed the email so I have 3 accounts with the same email address as Skype seems not to be able to manage multiple accounts with the same email!

• IMac is not able to share multimedia files with multiple users on the same computer.

  We just bought a new IMac that we were very excited.  We have phones Apple and iPads, replacement and ten year with a new Mac old PC made since.

  Now, the trouble begins. For more than ten years Windows had several usernames on the same machine and have been able to have a shared folder only for music, pictures and video that my iTunes program and others could acsess and share from several user names. This kept all in one place for new photos families by me or my wife and our 30 gigabytes of music that comes from our CDs was available at bolt of us. Now in train to implement on IMac should be easy but is impossible.  after transferring the music to my login information, it cannot acsess all files on my login. I am not even able to share or provide his acsess. I can move the iTunes folder to my shared folder. She can get acsess now but iTunes says that the library file is locked. I worked with care from Apple on the phone for that sold, but they believe it will not be possible without creating two copies of the 30 gigabytes of music for each of us. who would take more hard drive when it failed too.  Sharing is not any help. These files were before iTunes. I'm not pay 30 dollars a month to store in icloudcor use a google reader slow to the Internet connection when everything's fine here. Apparently Applow programmers do not believe in sharing of multimedia files between two users on the same device, even if a PC does that very well. My choice here is so far have duplicates of all the photos, music and videos loaded on the disc for me and my wife, charge all the media for an external hard drive which for some reason any all Apple programs will share, or return the mac to another PC that will be able to make several connections with sharing music and photos. Apple if you are reading this you are 10 years behind on that. Not everyone is born in the last five years and bought their music on iTunes to be able to use home sharing. Home sharing cannot help this. your applications should be able to be told to use the media files shared without import copies to readers of the user. I am very disappointed. Someone else has any ideas for that?  I have pictures, not iPhoto. I have a week more to be able to return it. I'm not interested in making a fake account that is always connected to share or maintaining of me constantly connected. It should have been easy, I had to be happy to play with new software.

  Photos, iPhoto and iTunes libraries must appear on an external hard drive that is formatted as shown below to be used by multiple users on the same Mac:

  

  So get a properly formatted external HD and move your iPhoto/pictures of her as well as your iTunes library.  This way all your iMac users can access and use both libraries.

  An alternative to the external HD method is to partition your internal hard drive into two partitions, one for libraries.  It is formatted as shown above and be large enough to contain the libraries and allow the expansion of libraries.

  

• Parameters for the single instance of DCOM for multiple users on the same machine

  I have a DCOM on a Windows 2008 R2, Enterprise Edition machine. I would like to be able to open an instance of the DCOM and have it accessible by multiple users on the same machine, i.e. users connected to Windows accounts.

  What settings will do? In the tab 'identity' in dcomconfg for my DCOM object settings, I tried "interactive user", 'the user running' and 'this user', all three lead to the same result: start a new instance DCOM on easch Windows of the connected customer accounts, despite the existence of bodies being already running on other accounts. This baffles me, especially with the third alternative, 'this user', which should certainly lead to all proceedings being started by this specific account? This is not the case. Any help would be appreciated!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Dblink Oracle to sql server, multiple database on the same server sql under a dblink

  Hi, we managed to set up an Oracle dblink to sql server and retrieve data.

  The user of sql server have been using via dblink has access to multiple databases on the same sql server

  But the question is how in oracle (if possible) prepend you the SQL access to this?

  For example:

  Sqlserver_prod has the user sqlserver_user which seems to be set up as default database sqlserver_db1

  But we have select access to sqlserver_db2

  all work well as sqlserver_user

  Select * from table_fromdb1

  Select * from dbo.table_fromdb1

  Select * from sqlserver_db1.dbo.table_fromdb1

  as does

  Select * from sqlserver_db2.dbo.table_fromdb2

  more in Oracle

  Oracle_db a dblink sqlserver_prod. World connection sqlserver_user

  everything works fine

  Select * from 'table_fromdb1"@sqlserver_prod '.

  Select * from 'dbo '. "table_fromdb1"@sqlserver_prod

  But how to (if possible) access from oracle

  sqlserver_db2.dbo.table_fromdb2

  without having to create a new sqlserver_db2_user referenced in a new dblink

  If oracle for oracle would be

  Select * from remote_oracle_schema.table@remote_oracle_db

  Hello

  You cannot select a table in a different SQL * database server from that to which the gateway instance connects.
  As stated in the documentation-

  Oracle® database gateway

  Installation and Configuration Guide

  11g Release 2 (11.2) for AIX 5 L Based Systems (64-bit), HP - UX

  Itanium, Solaris (SPARC 64-Bit), Linux x 86 operating system,

  and Linux x 86-64

  In the section.

  The example SQL Server multiple databases: Configuration of the modem router

  A separate instance of the gateway that is required for each SQL Server database. Each

  instance needs its own Gateway system ID (SID).

  ==========

  You will need to create a new instance of the gateway for the SQL * Server DB2 as well as a link separate db.

  Kind regards

  Mike

• I use Thunderbird on multiple computers to the same gmail account but I have a laptop with little memory, so I need this laptop only to download a few files

  I use Thunderbird on multiple computers to the same gmail account. I have a small laptop with very little memory and it runs out of disk space when it downloads all my folders. I would only download some of my file on the laptop, but keep all the folder on my other computers because they do not have problems with disk space. When I unsubscribe records in 'manage folder subscriptions' then he cancels his subscription on all my computers, not just the laptop. When I go to 'Properties' on the folder and sets 'retention individual police' these settings are not applied at all. What can I do?

  All of the messages in each folder will appear in your message list. But this does not mean all the bodies of messages are downloaded, if you have properly configured the parameters of the disk. If what I described above stuck in your settings then Message body should be downloaded only 'on demand' when you click on each message.

  To confirm this install the addon glodaquilla, which has a column "on the disk" that indicates if a message is on the disk. If you want, after you have installed the addon set Thunderbird to work offline, so it does not download message body when you click in the list of messages.

• How to switch between multiple windows in the same application?

  Hello

  I use OS X Capitan version 10.11.13 and I'm trying to find an easy way to switch between multiple windows in the same application by using CTRL + alt or different keys.

  Here is what I feel...

  Let's say I have Outlook, Google Chrome, Safari, iTunes and apps 'about this Mac' open.

  I open the new message window in Outlook and another Chrome window. I have therefore 2 separate windows in Outlook and Chrome.

  With that, I'm unable to move the composition and the window main outlook which is so annoying. Let's say I want to read the emails by the prospect main window and transfer of the content of the compose window! The command + tab doesn't take me to the main window of Microsoft outlook! Even if there were the last visited / applications window. This constraint is not intuitive, unless it can be configured in the settings?

  Strangely, I can't switch to the "about this Mac" window.

  The work around is to use the function (F3) mission button and click on the window, that I want to use or click the "Outlook" application on the dock icon and choose the window in the list.

  Does anyone know how switch between different windows in the same application by using a key combination or one another method other than listed above?

  Thank you

  Avinash

  In general, an Application that can open multiple windows provides a "Windows menu" you can choose the window you want.

• Multiple copies of the same mail and "unresponsive".

  I have fought with Thunderbird for about a week now and have had no chance to solve my problems. Any help would be greatly appreciated! I tried all the suggestions on the FAQ page.

  Here are my symptoms:
  -Make multiple copies of the same email with the same time stamp.
  -Not pulling new e-mail messages.
  -Whenever I try to navigate upwards or downwards in the Inbox or open an email TB will does not.
  -J' got warnings from the following script:
  Script: resource://gre/modules/XPCOMUtils.jsm:323
  Script: chrome://messenger/content/mailWindow.js:179

  Here is what I tried:
  -J' completely removed and reinstalled TB (and recovered my profile).
  -J' have compressed files.
  -J' rebuilt the database world.
  -From TB in safe mode does not seem to make a big difference.

  Fortunately, I have access to webmail via my ISP and it works fine.

  Thank you!

  McAfee has released a faulty update, please contact them for support on changing the setting to something that actually works.

  I saw a poster here today who used their support chat and they 'fixed a few adjustment' and now all is good.

  Not good was not what I wanted to say

• Firefox open multiple tabs of the same site at the same time, why

  some site that I visit - when I try to use yahoo or facebook, messaging - multiple tabs of the same pop up and open and bring me to this last open tab - never let me finish what I'm doing. Why is this happening?

  I had this problem (when I opened Firefox, Facebook kept several tabs open, even when I was on other sites such as Google).

  After you restart Firefox with modules disabled (via the Help menu Firefox), I enabled first of all Plugins, then the Extensions, on-to-one.

  The problem is back only when I activated Facebook Toolbar 1.7.3 and disappeared when I disabled it again.

  This extension has been updated on 3 August 2011, which is probably when the problem started to appear (worse gradually). The extension tries to integrate some utilities of Facebook with the browser, but it's something that I can easily live. If you are having similar problems, try disabling Facebook Toolbar 1.7.3

• How to select multiple cells at the same time?

  Hello

  How to select multiple cells at the same time? What is the keyboard shortcut?

  Thank you to.

  Flo, a french guy.

  Hold down the CMD key when you select the cells.

• [Q] can Vision track multiple objects in the same area - objects that might cross?

  Hello

  Sorry for this long title, but this is my question.

  Can Vision track multiple objects in the same area - objects that could cross?

  Because I'm able to do, extraction of XY, but it seems that "IMAQ County objects ' don't follow framework after but framework opposed, but extract the coordinates XY always in the same way, as for example from top and whenever he sees an object, it retrieves the XY, but if the objects pass through (then it will extract XY without worrying that the objects was the earlier but just based on"scan from top to bottom").

  That's why I open this topic in the forum of Vision no part: http://forums.ni.com/t5/LabVIEW/Sort-XY-by-closest/td-p/2440428

  Thank you

  Sébastien

  Thank you for your response.

  My problem is that we work with very small insects and the shape/color is the same for all.

  Then the solution is: Let's wait for "IMAQ County objects 3 ' then .

  Thank you

  Sébastien