Multiple SOA clusters in a single domain

Similar Questions

• Several AD account in a single domain for a single user

  Hello
  
  IOM supports several AD account in a single domain for a single user?
  Scenario 1:-If multiple accounts exist already in AD can I draw from AD to IOM for single user.
  
  Scenraio 2:-IOM allows the creation of multiple account in AD for a single user, when asked to IOM?
  
  Thank you

  Yes. This is possible. IOM allow this.

  of course the recon rule would be employee number or something "sAmAccontName" for the recon target

  While commissioning ensure that you generate unique and common of Name(if in same OU) for the same user sAmAccountName

  If you keep above childless having several account for a user to sing in the only area

• Is it possible to partition my drive and back up my content to a single domain then selectively reinstall the original content?

  Partition HARD drive

  XP home - 26 used and 123 free Go - is possible to partition my drive and back up my content to a single domain and then selectively reinstall the original content - there is a problem with my operating system, a recent problem has been fixed by a tech reinstalling another version of XP, that I discovered in trying to repair, I have the original disc and I want to reinstall it on the partitioned space - I know that I can reformat and reinstall, but get all the programs and extras back can be a real problem, so would be grateful for the help please

  Use of third-party tools like Partition magic., etc., after installation, you will get the option to resize the disk.,.

• Multiple Crypto cards on a single Interface of ASA

  Hello

  I work with a TAC support engineer, and while troubleshooting it suggests to assign two different cryptographic cards on a single interface.

  It is technically possible to have multiple Crypto maps on a single Interface ASA?

  PS: I know have several sequences in a single encryption card would work, but it is a case that I must address multiple Crypto maps on a single ASA.

  Hi Ali,

  The rule is by interface, a single card encryption is supported. You cannot assign more than one encryption on a single interface card.

  Documentation: -.
  "You can only assign a single encryption card defined on an interface. If multiple crypto map entries with the same name of card but a sequence number different, they are part of the same series and are applied to the interface. ASA first assesses the entry card crypto with sequence number low. »

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/ASA-command-reference/A-H/cmdref1/C6.html

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• is it possible restart auto multiple db Db in a single House

  Hello

  OS version: 11 GR 2

  standard edition

  I need until the database with my involvement, so I found db starting his allows only that once a position is real...

  Makkina Srikanth says:

  Hello

  OS version: 11 GR 2

  standard edition

  I need until the database with my involvement, so I found db starting his allows only that once a position is real...

  1. you need to share the environment if Windows or Linux?

  2. have you read or browsed https://docs.oracle.com/cd/E11882_01/server.112/e25494/restart.htm#ADMIN12709

  Database instance

  Restart Oracle can accommodate multiple databases on a single host computer.

  3. you must have grid infrastructure in place

  4, you need efficient on the srvctl management policy which

  5. IF you are looking for with grid infra - Autostart on reboot of the operating system can

  / etc/oratab - example

  ORCL:/U01/app/Oracle/product/11.2.0/dbhome_1:Y (this column provides information)

  DBSTART and dbshut provided by oracle, you can use

  Note: you must connect the kernel startup scripts

  Refer to: https://matthiashoys.wordpress.com/2012/04/20/automatically-start-oracle-11g-on-oracle-linux-6-2-after-server-reboot/ (demo)

  You must check the below

  Data management policy.

  • AUTOMATIC(default): the database is automatically restored to its previous state (started or stopped) running when the database host computer is restarted.
  • MANUAL: The database is never automatically restarted when you restart the database host computer. A MANUAL parameter does not prevent the Oracle Clusterware to monitoring of the database so that it is running and restarting if an error occurs.
  • NORESTART: From Oracle Database 11 g Release 2 (11.2.0.3), you can use the NORESTART value. Similar to the MANUAL setting, the database never automatically restarts after a restart of the database host computer. A NORESTART definition, however, never restarts the database even if a failure occurs.

  Note: do not confuse on instances, it would allow to manage with home alone.

  -HTH

  -Pavan Kumar N

• multiple bevel effects on a single layer?

  Hello, I decided to participate in the PSCC, and already, I was really happy to know that there is support for layer on groups in CC effects, but in the latest version there is even support to add multiples of the same type of effects on a layer (for example, "stroke") but not all the effects have this option. I was wondering (and hope!) if it's something that will be in a future update?

  As a more minor feedback, I have also not found a way to remove additional effects: say that I added 4 effects of 'coup' in a single layer, that I have not found a way to remove the extra 3, I have created. It would be really awesome if the whole layer effect function has been more than one function "on demand" where you can freely add/remove as many effects of each type as you want and start with a clean slate "" so to speak.

  In any case it is certainly moving in the right direction for what I use it for.

  Thank you!

  The effects of additional weather elimination:

  You can either click on one of the traits in the layers panel and click the trash downstairs, or

  

  Double-click the effects above the strokes in the layers panel, select the stroke and click on the trash can in the layer Style dialog box.

  

• Multiple SOA homes cleanup task

  I was instructed to clean the houses of 11g SOA. How do you know that are used and those not being used? When I click on the start menu and go to programs there are listed multiples.
  
  Oracle SOA 11 g - home.1
  Oracle 11g - Home 2 SOA
  Oracle SOA 11g - Home3
  Oracle SOA 11g - Home4
  Oracle 11g - country5 SOA
  Oracle SOA 11g - Home6
  Oracle SOA 11g - Home7
  Oracle SOA 11g - Home8
  
  There are also several common home and Weblogic (Beahome 1) etc.
  
  Haven't configured it so I don't know what that is really needed then want some help/advice/developed on getting rid of these if they are not needed. any help is appreciated!
  
  Thanks in advance!

  Nevermind, after the installation of all new suites SOA. I figured out how do you know one that is used and not used. If you use ProcessExplorer it will show you where the Java are used and which must point to the current ongoing SOA execution env which cannot be touched. So pretty much everything which is not be managed can be removed by simply going to the Start Menu and go to the appropriate no used oracle common home/oracle service bus/oracle etc and click on uninstall.

  much easier that I had done what it is.

  I hope this helps others who need to clean up their environment with multple unused oracle apps.

• Manage multiple vCenter Clusters

  I'm fairly new to VMware (paid editions) and I was wondering if someone could help answer a few questions for me.

  1. can I create more than one cluster server to manage? I have a Dell r710 coupld I want in a cluster and three Dell 2950 who I want in another cluster.

  2 can they be managed the same vcenter Server?

  To give me if I'm not asking this question correctly. By clusters, I mean the servers that offer their resources (mem, proc) to a common group of virtual machines.

  Thanks in advance!

  No, hosts on the cluster can have different hardware.  The important thing is that a cluster hosts have compatible processors for vMotion and DRS.  Take a look at the compatibility for Dell matrix.

  Example - one of my groups has hosts with AMD Opteron 8214, and a single guests with Intel Xeon cluster.  You just keep in mind the difficulties that may arise when you want to move a VM (cold migration etc.).

  I hope this helps.

  Dan

• Read multiple audio files with a single button - Playlist

  Hello

  im working on an interactive project that require the playlist function,

  The idea is to have a single button on a page that will play all the audio files on the page in the order they

  as you play a complete album in itunes or other players, when the first ending song the following begin to play and so on.

  Any ideas?

  Thank you

  Guy

  (1) put all the audio files in the Indesign document.

  (2) create a button,

  3) go to the Control Panel button and add multiple actions for 'Her', and for what actions define the audio file name

  

  Now go to the Panel of Timing and to organize the sequence of the audio file to read, just as the Panel layer, (drag / drop)

  Check the output.

• Save a pdf file showing multiple work plans into a SINGLE pdf PAGE

  Hello

  How can I save my pdf so my 4 work plans presents a single PDF PAGE? (I don't want to merge 4 rebounds in a single pdf FILE, but I want to be able to see all the work plans of the 4 side by side in a single file pdf.)

  Can I choose when opening the pdf file, or what I need to record a special way in Illustrator, to have my 4 work plans?

  Cordially Grimkarklud

  What you want to do is to convert your work plans by plowing the pages. I tried with CS4 (saving up to CS), and the main problem I've had is having to close the gap that has been previously between work plans.

  

  Help Adobe seems to imply that the CS5 works better

  If you save a document Illustrator of multiple-work plan in a previous version of Illustrator, such as CS3, you can choose to save each work plan in a separate file, as well as a master file that includes all the merged work plans. »

  If you try CS5 save up to CS3.

  Once you get pages of tiles, then when you make a PDF file, all your pages will be on a single page pdf.

• Multiple Flex applications on a single Page

  Now that I was laid off from Adobe (with 700 other people), I would ask you Flex consulting opportunities, and one of the possibilities are web designers/developers wishing to offer their customers a value-added components.

  My question is I've heard you don't want for example three separate applications to Flex on a single web page, as it results in three instances of the generated Flash Player, or something like that.

  So is it necessary to group multiple Flex components in a Flex application to each web page? This may limit the placement of Flex components on a web page, because the web page will be completely done in Flex, that the page should be available.

  No indication in this regard, especially Alex and others on Adobe's Flex product team.

  All new Flex needs help on Flex components/applications, I am available: [email protected]

  Thank you!

  Greg

  IMHO, it's all about memory.  Many pages have several flash banner ads running drives.  This is because these ads are small.  If you go to paste a few applications really small flex on a page, I would expect that most people have enough computer resources to manage it.  Once you get more complex, your apps also probably face more screen real estate and soon you are looking for a portal and probably should have a main shell that loads of apps.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• Data in multiple lines concatenated into a single line to separate id

  Hello
  
  I have a t1 like this table:
  
  create table t1
  (number of c1,
  number of C2,
  C3 number (4.2)
  );
  
  Data in the table are such as:
  
  ----------------------------------------
  C1 | C2 | C3 |
  -----------------------------------------
  102. 1. 1.1 |
  102. 1. 1.2 |
  102. 2. 2.1 |
  103. 2. 2.1 |
  103. 2. 2.2 |
  -----------------------------------------
  
  How to display data by using a query above?
  
  ------------------------------------------------------
  C1 | C2 | C3 |
  -------------------------------------------------------
  102. 1, 2 | 1.1, 1.2, 2.1 |
  103. 2. 2.1, 2.2.
  ------------------------------------------------------
  
  Thank you

  So you're after what we call 'Aggregation in the chain.'

  Check this link as it highlights several techniques:

  Aggregation of string techniques

  A Re: Concat ranks of the values in a single column Michael

  At Re: multiple lines in a single line in the 'single column Table' followed by reason of Billy on the conduct of a stragg first.

  In addition, 11 GR 2 has the LISTAGG function.

• Photosmart 6520: HP Photosmart 6520 stopped saving multiple page PDF in a single document

  I'm I scan a multi page document and save it in a single file PDF so have been using the icon "+" for each subsequent page.  The pages appear in the window as 1/2, 2/2, 3/2 etc.  When I save the document it saves each page into a separate file, for example 0001, 0002 etc..

  I just performed a clean installation of Windows 7 and reinstalled the disk drivers with updates on the HP site.  The driver version is 9.8.4.0.1189.  I have had this printer for a while now and never encountered this problem before.

  Does anyone know how to fix this?

  Thanks for the reply to my post.

  I looked at the advanced settings and the 'Create a separate file for each scanned page' was already unchecked which should have meant the scanner registered a several pages in a single PDF document.  I decided to try a little test, so I checked the box, scanned a two page document and recorded which resulted in two separate PDF files, as you can imagine.  I then unchecked the box and did the same thing and this time he recorded two pages in a single PDF.  I have no idea why checking and unchecking the box seem to have solved the problem, but there so I'll take it!

• Can not put multiple PDF files into a single document no more.

  I was able to scan multiple PDFs into one document on my desktop. I can no longer. I have a printer Photosmart HP 6515 and Windows7 OS.  PS. just the other day I had someone remotely access my computer to fix a problem with MagicJack (computer phone) and who knows what they might have done. Thank you to everyone.

  Nice day

  Here are a few screenshots I took it to give you an example of how to do to scan several pages in the scanner software. Make sure that the option is disabled for the creation of a separate file for each scanned page. Subsequently, click on the 'Destination' tab above and save it to any folder you want on your desktop or elsewhere.

  This should help, good luck

  Have a great weekend!

  

  

• How to set multiple values clustered with local variable?

  Hi all

  Okay, I made my way through Labview for everyone and have some basic concepts down. I can see with a cluster, if acting directly on it, you can ungroup, change values, rebundle, etc..

  I try something a little more complex... and just do not know how to start on this.

  I have a menu menu ring set. I created this with a typedef, with 4 values.  I used this typedef 7 times, more a few LED bool, in a cluster. I made this cluster a typedef.

  Therefore, in my main vi, I started designing, I put an example posted here... and inside, I have two instantiations of the typedef cluster commands selection of left and right.

  I dropped in this vi, a copy of the menu ring typedef (same typedef as in clusters, values) called reset all tubes.

  Now, I am trying to understand how, with an event to change the value to 'reset all the tubes'... that I can start with the left switch and change all tubes (here is the menu ring selector) to the same value as what has been selected with the ring of menu 'Reset all the tubes'.

  I created a local variable for the selector on the left. It is configured to read values. (I'll be doing the same thing with the right too, but just to start with the left).

  In the examples I've seen where access to a cluster, you could ungroup the cluster... browse and change the values... maybe pull out all the "hits" in a table and go through to update the values.  And when you group or ungroup the bunch... you can see the values, etc., when you stretch on the block diagram.

  With the local variable... I do not see to 'stretch' it as I expected... so I can access the values "tubes"... and all at the value of the 'reset all the tubes' ring menu value.

  Someone can put me on the path on the best way to do... or is it a component structure I'm missing here?  Am that I on the right track everything first here?

  It seems pretty basic to me, but miss me just something here on the way to start...

  Thank you in advance,

  Cayenne

  You can't do this with a for loop of how the Department is structured, but why make it so complicated?  Just group the new value in the cluster, as shown below:

  

  If you do not want to use a loop for example, consider the restructuring of your cluster.  Group ring and a Boolean value in a cluster, and then unmold 7 of those in the cluster of selector.  Then you can use 'cluster to the table' and 'picture of cluster' for all elements of the external cluster will be of the same type.

  Also, be careful when using rings in the form of type definitions.  You probably want to use an enumeration instead.  The elements of a ring do not update the when you update the type definition because they are considered to be cosmetics. the elements of a definition of enumeration type update, because the elements of an enumeration are considered as part of the data type.