Multiplot table edge OR tracing

Similar Questions

• Limiting values in the table edge invites

  Hi gurus
  
  I need help on the dashboard line. I have a Customer column with 12 names. Now my requirement is I need only 5 clients whose name to display in the dashboard line. How can I limit these 5 names in the dashboard quickly so that users can choose among these 5 names. Please guide me.
  
  Thank you very much

  When creating dashboard prompt in view-> them choose SQL results-> enter the sql code it
  the sample SQL,
  SELECT table.customer_name OF SubjectArea
  Where table.customer_name IN ('name1', 'Name2', "Name3", 'Conjoint4', "Name5")

  Thank you
  Vino

• On the table edge Mac & the application of the dashboard?

  on my Apple iMac computer in the Mac Dashboard, I have a few Mac Dashboard app that I used a lot

  but for some reason the ESPN App & The Movie Theatre dashboard Dashboard not working more

  It is impossible to get the content?

  did stop work of the dashboard application Apple make these 2?

  in this way for a few days now and I wanted to know what is happening?

  so I just need to check with you guys to see what is happening?

  other then that my Apple computer iMac works perfectly

  Remove these applications of dashboard, then reinstall it.

  To remove a Dashboard widget, click the Remove (-) button in the lower left corner of the dashboard, and then click the button close the unwanted (X) widget.

• Table edge & Path Analysis

  I am facing a problem of weblogic server in my previous installation of OBIEE11G is why I install fresh copy to the new server. I make a backup of my project(Dashboard+Analysis) and put it in the folder E:\Project now I want to open this project of E:\ By car, but in the responses, it only shows MY ACCOUNT & SHARED FOLDERS. How can I change the path or if it is not possible then when I paste this folder appear in the answers.

  Concerning

  Hello

  You must place your objects in the path of the web catalog.

  Or you can also point the web catalog to another folder.

  You can check where your current web catalog is in Enterprise Manager in "Deployment" > "Repository" and there you have the path "BI-catalogue presentation.

  Be aware that you may have problems with permissions on your copied objects as you're not really supposed to make copies of the file system of the web catalog, but ideally, use the catalog to archive and Unarchive Manager tool, but nothing that cannot be fixed when this happens...

  (Make sure that you always problemcs in the file, the files and folders)

• Advanced table no vo data population

  Hi people,

  It is quite an unusual scenario or maybe I'm missing something really stupid. Please help me on this.

  Under pageLayout, I have a MainRN and an advancedTableRN, I defined the following advanced table properties:

  ID, Style of the region, AM definition, Instance of the opinion, records, width

  In addition, all the columns and items under each column are defined with display attributes must be.

  On the PR page, the VO has been prepared with executeQuery and attributes of VO show registration (checked using debugging), but the advancedTable is not complete any registration.

  Please answer as soon as POSSIBLE on what might be the likely reasons for this anomaly.

  Concerning

  ARI

  Ari,

  (1) I have not obtained only one reference AM.

  No, you have the 02:00 reference in your Page.

  -amDefName = "AmritJtfInteraction.oracle.apps.asn.JtfInteractions.server.AmritJtfInteractionsAM" id = "pageLayoutRN" > "

  ' -amDefName = "AmritJtfInteraction.oracle.apps.asn.JtfInteractions.server.AmritJtfInteractionsAM" id = "JtfTasksRN" text = "Tasks" width = '100% ' viewName = 'JtfTasksVO1"blockSize ="5"detailViewAttr =" "recordHistoryEnabled ="true">

  You have the 02:00 reference page.

  All references of the AM in the page will create itsown AM instance during the time of execution.

  You set the controller to the PageLayout, so when you get the handle VO in the controller it will take the VO of the first instance of AOS instance and runs the query.

  Since you AM attached to the Table edge, VO attached to columns advanced table instance refer to the instance of VO in the second case of AM, which is not executed at all.

  Thus, to solve your problem, remove the reference of AM of the edge Table. It should be

  -

  Try to make the above change and see what happens. Let us know how you go.

  If it solves your problem, please close the thread by checking the useful and correct answer.

  See you soon

  AJ

• Search DR. for line of dashboard, dynamic table to retrieve the offices assigned table

  Hello

  
  I don't have information on the role of the user when running in the session variable.
  Not in the database.

  
  Now, to get office that manages a Manager I need to get the role, i.e. "areamanager".
  and the username "mike01" to recover the offices "mike01" manages (sql with two parameters?).

  It is possible that a local 'bob12' Office Manager uses the same table edge OBIEE but for him
  the role is 'localmanager' and he would see only the office works in, not all the other offices "mike01" also manages.

  
  If I had roles in an array of DB Oracle, it would be easy. I'd create just a view of the mapping.
  The problem is, I do not have this information in the DB, but I need
  to prefilter the dash prompt, so the "localmanager" can't select
  all offices but only his own. "mike01" on the other hand, all its functions.

  Now, how do I do that? I thought about the new .rpd 11g function lookup table to pass session variables to
  a SQL function or procedure. Which seems doable?

  Hi metalray,

  Not sure about the transmission session variables return from a procedure...

  But a simple way to do this is to have several guests, one for each role.  Filter them according to your requirements, place them on the dashboard and conditionally hide them based on the role of the user so that only the appropriate message appears.

  JB

• Selection multiple question table advanced on the OFA page

  Hello
  
  I have a table edge on the OA Page. This advanced table, I had added the action of multi selection table.
  For multiple selection, I have attached an Instance of the view and an attribute of the view.
  
  There are text entry field in the advanced table. If the user makes changes to it, a 'updateDate' event fires.
  Co:
  {if (Event.Equals ("updateDate"))}
  System.out.println ("A");
  String rowReference =
  pageContext.getParameter (OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
  
  [Serializable] param = {rowReference};
  
  am.invokeMethod ("DetailsCheckBox", param);
  }
  
  Am:
  public void DetailsCheckBox (String rowReference) {}
  System.out.println ("B");
  line oracle.jbo.Row = findRowByRef (rowReference);
  
  
  Ivo DetailsVOImpl =
  FindViewObject ("DetailsVO1") (DetailsVOImpl);
  
  String chkbox = (String) row.getAttribute ("Multiselect");
  System.out.println ("multiselect original:" + chkbox);
  If ((chkbox == null) |) (chkbox.equals ("N"))) {
  ivo.setCurrentRow (row);
  row.setAttribute ("Multiselect", "Y");
  String chkbox1 = (String) row.getAttribute ("Multiselect");
  
  System.out.println ("multiple selection:" + chkbox1);
  Ivo.Reset ();
  }
  
  }
  
  The problem is that if there are 5 lines are displayed in the advanced table and changes to one of the first 4 rows, the box gets checked on the page but if I make the changes to the last row, the box is not checked on the page, even if the statement String chkbox1 = (String) row.getAttribute ("Multiselect"); Returns 'Y' AM.
  
  Help, please. Its urgency.

  Hello

  We use the following pseudocode of the AOS.

  VO. Reset()
  While (vo.hasNext ())
  {
  your code
  }

  This will solve your problem.

  Thank you
  Kumar

• hot spot sleeping Mac Pro not working

  After the installation of El Capitan, I find that I can start is no longer the screen saver slide show, although the hot spot / corner functions properly to begin the Mission control, table edge, Notification Center, office and Application Windows. It also makes display sleep, so everything EXCEPT run the screen saver works.

  The version of the OS is 10.11.5.

  Open system preferences > desktop and screen saver > select screen saver > do you have the first definition after FOREVER. If yes change in 5 minutes and check the show box with clock.

  Select the screen saver > click Preview and select shuffle slide order.

• reportcrash hogging cpu

  My 2011 Macbook Pro is running Yosemite (10.10.5), and it was really, really slow. I launched the monitor of activity - with no other apps launched - and the CPU usage displays all active cores to 25-50%. In the main window of the activity monitor, ReportCrash is the use of anywhere from 25 to 78% of the CPU. Seems to me that might explain why Lightroom and other applications run very slowly. No idea what is causing, and what I can do about it?

  Select this process in activity monitor, and then click the exit button in the toolbar. Click the force quit dialog button.

  See also:

  CT , April 17, 2012 10:44
  in reply to KoyangieVA Solved

  In addition to systematics of Linc to isolate the problem, other things I would consider trying if it was happening to me:

  I would try to remove the dock preferences: they're in your home library (get there by holding down option and using the Finder menu go) in preferences and in the preferences/ByHost records. I would delete anything with the word Dock inside.

  A very long shot, is the Dock process hangs because of table edge or widgets. (I think I know that the widgets/dashboard are managed via the Dock process; they were certainly under Snow Leopard). In this same folder preferably are various Dashboard preferences, and in this same library folder, there is a Widgets folder, which contains all your third party widgets.  These guys get out of there.

  Disconnection and connection, see what happens.

  Charlie

• XY graph with string input

  Hello

  I want to do the following:

  I want to generate random numbers in a single column on my table and the second column with the date and the current time. Then I want to plot only the random number sthat have been generated with TIME to Get Date/time function. I want to put this in a picture and draw with a XY Chart rather than in a worksheet. I am stuck and would appreciate any help.

  Side note: for my purpose, I want to get the time exercise, rather than using a waveform chart and use the clock internal to this vi.

  Thank you.

  Don't use do not LV2013 here, so do not know what you have tried. But if you use Get Date time in seconds, you will find that the timestamp that is generated can be used to plot against your randomly generated number. No channels not involved - a cluster of timestamp table and the data table can be traced on a XY Chart.

  For example, the following snippet generates a random number all the 100 ms, twenty times, then trace the number against the timestamp, that each of them was created in the. Right-click on the graph XY and the display of absolute time format setting allows you to customize the display of your heart's content.

  

  Edit - impossible to believe that I didn't not the sentence as "no condition". It was an open goal!

• Requests for night mode

  I've seen some suggestions for night Mode, and I thought I would add my voice. I think I saw these applications elsewhere, so I don't think I'm the only one who would like to see these.

  1. If the dashboard is in night mode when an alarm goes off, allow to stay in night mode, if the post alarm action is "previous screen".

  2 when you use the timer, the dashboard switch to night mode when the timer expires rather than by saving mode. (I think also it would be nice if now pressed the snooze button, you are in mode night rather than saving mode.) Does anyone use same power saving mode if often may not be back in the system menu for those rare moments, is it necessary?)

  3. show the current weather (perhaps conditions may be in the text format to keep the dim screen) or just the temperature mode at night. Bonus points for also show the forecast for the day ahead.

  4 be nice if you can use the menu without leaving the night mode, especially if you want to control the music.

  Maybe to have a dark theme that looks like the current mode of the night (essentially a large clock with no display app) could be an idea... I could see this resolution #1 and #4, but I think that the brightness sliders would need allow the screen to go drive then it does now, given that the sliders do not allow the screen to go dark when night mode he demonstrated a theme.

  Because the dashboard is connected to a peripheral internet, the best way to "fix" most, if not all users associated issues with sun/light, night mode and alarm time display of the reactions are to activate an option for the dashboard in order to exploit its display based on the times of sunrise and sunset the Sun for the location of the users. In addition, a slider to customize and set the brightness of "dim" within hours to lift / bed of Sun and a check box if the dashboard to automatically mode at night at the time of the sunset are needed.

  By implementing an option of sunrise/sunset, when a person sets their alarm for 04:30, the dashboard with know it's still dark outside and the screen will remain in night mode (or a parameter custom Sun) and in this mode for all options (IE main screen etc.) after the alarm is turned off and in this mode selected until the time of the rising of the Sun. This way you and your spouse will not be exposed to a blinding light when the alarm goes off and subsequently. When a light in the room is lit, the optical light sensor should recognize this and turn the table EDGE for normal operation and the brightness for the display. However, when ambient light is off and the time has not reached the time of Sunrise, the dashboard will return to the mode night until dawn is filled. Night at the sunset, the dashboard should automatically enter the night (or custom obfuscation) mode and turn only light and switch to normal mode when the room light is turned on. Here's how it should work in detail:

  For example with night auto mode checked and sunrise / sunset option enabled:

  07:20 sunrise / sunset is 16:45 / wake up at 05:00 / sex 23:00

  @Bedtime 23:00, the dashboard is already in night mode, since it's after the sunset. The dashboard display will be bright (out of the night mode) when the light is on, get into bed, turn out the lights, DASH will return to the night mode. If you need to change the alarm settings or watch the screen AT this time or any time between the sunrise /sunset times with ambient light, touch anywhere on the screen and the dashboard will return to normal mode, BUT to your darkness to measure because the time between sunrise and sunset Sun times. Alternatively, you can turn on your bedside lamp, DASH automatically exit the night mode and return to normal brightness, do what you need to do on the dashboard, turn off your bedside lamp, the dashboard automatically goes into night mode.

  @5 am, the alarm sounds, is not after the duration of dawn yet, so the dashboard is in night mode. If the ambient light is activated, the dashboard display will be bright, but after turning off the light, the dashboard will return to the mode night until the sunrise at 07:20

  @ the Sunrise 07:20 time, dashboard refers to "normal operation".

  @ 16:45 the sunset time, the dashboard goes into night mode.

  With automatic night off mode, everthing is the same, except at the time of the sunset, the dashboard goes out to your custom configuration of Penumbra. This custom twilight mode, a button "Night Mode" should be on the screen for easy access to night manually mode at bedtime. At the time of the alarm the DASH will enter into your custom shadow (with the ability to easily select the mode night for the purposes of joint review panel), and then at the Sunrise, the dashboard back to normal.

  SONY, that's how you have to fix the awakening of the table EDGE and brightness of display problems.

  1 download auto implementation of the daily sunrise / sunset hours sunlight for the location of the users.
  2. implement an option to toggle Sunrise and sunset the sunset feature.
  3. set up an option for automatic night mode using the sunrise / sunset times.
  4. implement a cursor for a twilight custom during the sunrise / sunset times.

  Operations of firmware:

  1. get time sunrise/sunset from the internet
  2. after the time of the sunset, night mode auto or user setting sun
  3. after the time of the sunset, the room lights on = normal display
  4. after the time of the sunset of the room light off = auto mode or user dim position night
  5. after the time of dawn, (current) normal operation at any time until the sun goes down
  6. Insert a touch of sleep screen mode to display mode dim custom between sunrise /sunset times

  If the alarm sounds before the sunrise time:
  1 go back to the position night mode or user dim

  It is essential for the dashboard, as a bedside alarm clock, to work as indicated. Please consider this correction to the dashboard.

  Best regards

• Why after years of working perfectly my xbox does not my computer for media sharing

  My xbox worked well before, when I went to my videos on table edge it would come with my zune and windows media sharing folders to browse and read my stuff. now, all of a sudden after having not changed all the settings on my laptop or xbox it no longer appears. also my media Center has stopped working and after going through the configuration several times, he won't find the Extender and now my xbox is only half as useful it has been. anyone with advice let me know what I can do but take into account I'm not a geek and I only understand simple explanation! I've literally exhausted my expertise on this need quick help!

  Hi DJSwell,

  You can consult the following wire link and check if it helps.

  Xbox to pc multimedia sharing

• Machine virtual IOPS / s report, how to display the name of the data store?

  Hi guys

  I am new to the Foglight community, this is a great tool, and I learn a lot.

  Currently I am trying to create a simple table that will show me metric of my VMware environment: Virtual Machine name, Datastore IOPS and data store.

  However I can't find how to include data store name in the table, because it is not a measure of the Virtual Machine. I think I need to expand the scope of my table to include VMware Datastore, but I don't know how to do this.

  -Mark

  

  Check the options available it seems that it can be done with WCF (the frame behind the Foglight dashboards).  We recommend generally customers who plan to build views WCF take adequate training or our PSO people engaged in it.

  In any case I can help show a quick example of how it's done.

  Please try this on a local/test server.

  Go to Configuration > definition >

  

  Make sure that you are in my definition, and click the icon to add a view. then choose from the tables and trees - oriented line table

  

  Give a name to the view, go public and make a portlet/reportlet and apply

  

  Switch to the configuration tab and click the change for the lines and choose a query

  Under query, expand the VMware and scroll down

  

  Until you can select the query for virtual machines

  

  And press the set button.

  Your view should look like this

  

  Now you must select the columns.

  Each column has a value you can edit and there is a button + to add additional columns.

  Lets start with the name of the virtual machine - click on the button to change to your default column and choose the context.

  

  Click on the drop down menu to enter key and choose the current line (virtual vmware machine)

  

  Click on the drop down menu to access path and scroll down until you can select the name and then click on set.

  

  You have created a table that lists the names of all virtual machines.

  You can click on save. and then click test, choose a time and click the result. A new window will open a show the list you of virtual machines.
  From here you can continue to add additional columns, each time choosing the key entry in the current line and the path to the metric/string to display.

  For example, the name of the data store.
  I change the module

  

  Click the configuration tab and click the icon to add a column

  

  For the column value, that I chose defined context once again, the key input is the current row and for the path, I expand the node for the data store

  

  And scroll until I see the Proprietename

  

  If you save and test you will see the result

  

  Keep adding columns and the data you want, notice that you have arrows that allow you to control the order of the columns.

  Note that you can click Show advanced configuration properties

  

  This will give you the opportunity to see the properties of the extra table, such as header - giving you the opportunity to give a more meaningful name (name of the data store, the name of the virtual machine, etc.) to the column header.

  

  You can now go you drag and drop the table edge/report and under my eyes, you will see your new view

  

  Drop it in the main view

  

  I hope this has given you the starting point to build this table.

  As I said, I strongly recommend going through our WCF training if you plan build more custom views or hire software Dell PSO Organisation to help build you views that correspond to your need.

  Best regards

  Golan

• Report - a list of all instances of FglAM with versions & type o/s

  I have not found any KB article, community or previous Commons on this subject.

  The Web Console. Host agent dashboard lists all FglAM ' assets/market' with their OS version/type & version FglAM.
  I have difficulties to create a report that lists all of the FglAM that have already been created with their versions & type o/s.

  FglamClientInstance & RemoteClient toplogies have "null" displayed for the field version so don't know where we can get this value.

  This simple query lists all FglAM and the last updated field:

  sb = def "<>
  #! FglamClientInstance # .getTopologyObjects () .each {}

  SB< 'host:="" '="">< it.name =""><   '="" last="" updated:'="">< it.lastupdated=""><>

  }
  return of sb

  RESULT:
  Host: alvbchan2k8-562 (fglam) last updated: 2013-06-20 10:07:10.375

  Host: loriw2k8r2f55 (fglam) last updated: 2013-06-20 10:07:10.375

  Host: loriw2k8r2f555 (fglam) last updated: 2013-06-20 10:07:10.375

  Examination of the application of the hosts of the Agent dashboard, seems, it gets these values from root of the Administration Server. all_agent_hosts.

  See attachment.
  So that won't work because we are interested in all THE FglAM whether they are active or not.

  Any help appreciated to generate a report similar to the table edge, but for all FglAM that have already been deployed with version & type o/s; No active and active.

  Thank you
  Rick

  Currently on FMS version 5.6.7, version FglAM is not stored in the FglamClientInstance or the RemoteClient types of topology.  FAM-5227 was generated to request the FglAM version to be stored in FglamClientInstance.

  The code following groovy lists currently active FglAMs and their versions:

  output = new StringBuilder()

  EOL = System.getProperty ("line.separator");

  fglams = server. RemoteAgentManagementService.findAllRemoteClients)

  fglams.sort ({IT. GetHostName()})

  output< "hostname,="" ,="" type,="" version,="" os="" name,="" os="" version,="" os="" arch"=""><>

  {fglams.each ()}

  output<>

  output< ",="" "=""><>

  output< ",="" "=""><>

  output< ",="" "=""><>

  output< ",="" "=""><>

  output< ",="" "=""><>

  output<>

  }

  return output

  RESULT:

  HostName, Type, Version, name of the OS, OS Version, OS Arch

  alvrstoner, FglAM, 5.6.2.2, windows, 5.1, ia32

  alvbchan2k8-562, FglAM, 5.6.7, windows, 5.2, x86_64

• OnPlus ON100

  Is it possible to have multiple accounts login to display the same table edge and devices?  We have activated an ON100 at our location in order to examine it and created an OnPlus account to one of our employees.  The device has been activated and is running.  Can I create an account for me to visualize the same device?  I created my account but I can't gett access the unit in the dashboard.

  If you can send me an email with the account you want to remove so that you can add it as an agent, I'll make sure to happen. For security, please send it directly to [email protected] / * /

  I assume that the account has no sites activated under him, right?

  Robert