Muse error, loading to the host FTP [FTP upload failed: 553].

Error loading to the host FTP [FTP upload failed: 553]. I use the last Muse and download through it is generated by FTP. I have never had a problem over a year to download updates. Why I get this error? How can I fix this? First time that's ever happened.

Hello

Please see the link below. I'm sure that you will find it useful.

FTP download failed: error 553

Concerning

Vivek

Tags: Adobe Muse

Similar Questions

  • Update of Muse CC 2014.3 still have FTP upload problem: the server responding is not in time, FTP is not supported on this server [connection has expired after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what I should do?

    Update of Muse CC 2014.3 still have FTP upload problem: the server responding is not in time, FTP is not supported on this server [connection has expired after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what I should do?

    Hello.

    Today, I had the opportunity to work with a user of Muse with the same problem after you perform the troubleshooting steps in the post above we decided to communicate with the host.

    Later, I learned to know that host IP of the user of Muse and they managed to unlock and muse began to connect to the FTP host.

    I have another host scenario suggests Muse to add user : 21 to the FTP address and then Muse was able to connect.

    For example ftp.domain.com:21

    Please try the suggestion 2 above and let me know if it works.

    Concerning

    Vivek

  • Adobe Muse, FTP transfer failed: 553

    Hello

    I have a problem trying to download some (minor) changes to an Adobe Muse Web site. The failure message is (short):

    "There is an error during the download of u1112 - 17.png. Try again later > FTP download failed: 533 ".

    (see photo below, in Dutch).


    The site is realized on an iMac and I have had no problem download from the site a month ago.

    Hoping to solve this problem I've renamed and replaced all the images, but nothing seems to work.

    Strange thing is: I don't have any image png with the name 'u1112 - 17.png' in my site or on my Mac.

    What is a police problem?


    Help, what is the problem and what can I do?

    Schermafbeelding 2016-02-20 om 13.06.01.png

    Hello

    in my library, I found a few tricks on your problem. Please take a look at to see if it applies to your boredom.

    Of other hand - forgiveness - it is well known, that in all these cases you describe I'm not a friend of a detailed diagnosis. In order to be independent in all these things is one of the reasons why I prefer an external FTP program. The difficulties with which we must fight encourage me in this opinion, especially because we are always looking for experts, we charge a 'jack of all trades '.

    To manage multiple Web sites or download my files, and sometimes for the reverse, for a necessary download from my server or use a "sync a whole site", I use FileZilla. It just seems easy for me to keep track of all transactions accurately and generate or easily reflect the desired tree structure.

    First and foremost, FileZilla has a function (translation of my German FileZilla), called 'compare the list of files. Here it is possible to use the time of size or change file as a criterion. There is also the possibility of 'hide identical files', while only those files that you want to redact remain visible.

    And even if it means that you need to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read information on how it works:

    http://FileZilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager

    Mac: Mac OS X (use: the additional download options)

    http://FileZilla-project.org/download.php

    Of course, you must also all data to MIME issues and access to reach your server, please contact your web hosting provider.

    Hans-Günter

    P. S.

    Since I use two screens, it has become even more comfortable.

  • Bad SEO. There is no difference in HTML export before load on the host?

    Bad SEO. There is no difference in HTML export before load on the host?

    I have a site with more than 350 pages, but only 8 are indexed... It took place from March, 2015.

    Can someone help me?

    See Search engine for Adobe Muse Web sites optimization for help on this topic.

  • Error loading to the FTP host

    I tried several times to upload to the ftp host and there is always a mistake to 60% which reads:

    Error creating the/images folder. Click on resume to try again. If the problem persists, try again later.

    How can I fix?

    Make sure that you have write permissions in the folder /images/ on the server. Also try to enter the absolute path of the directory you want to upload in the field host FTP download directory dialog box (with a / at the beginning). See the following thread, which can be useful in your case.

    http://forums.Adobe.com/message/4649869#4649869

    Thank you

    Vinayak

  • Impossible to get "to Host FTP Upload" to work.

    I have been searching for this problem literally overnight, tried combinations as much as now, I think that there is so much mess downloaded on my site with accidentally creating folder after folder after folder that I have no idea what to do.

    I bought a domain on GoDaddy last year and have just signed up for DreamHost for hosting. The domain is still registered at GoDaddy, and it's a potential issue cause because I'm not sure I entered the name primary, secondary, tertiary of DreamHost server information, in the right place with GoDaddy.

    Screen Shot 2015-04-25 at 6.31.19 AM.png

    However, for a moment there when I went to my area, (amandaasher.com), there are a placeholder there to DreamHost so that must be a good sign.

    I guess my first question should be how the hell can I erase all the B.S. that I downloaded on my host in the last 12 hours of sitting here trying to understand? I've been using FileZilla and tried to delete everything, but there was a file that would not remove and I feel like I need to start over at this stage.

    Second question is how to actually use this "Upload FTP host."

    And please, if someone directs me to this article:

    Adobe help Muse | Download a Site from Muse Adobe on a third-party hosting service

    I'll scream. I go back to this thing like 294832 times in the last 12 hours and he a. not. helped.

    Screen Shot 2015-04-25 at 6.31.40 AM.png

    The first page is going well. I am able to connect very well, and remove the credentials.

    The second page is where sh * hit the fan. Site URL seems pretty obvious, but I have no idea of what to enter in the box "Folder on the server".

    Screen Shot 2015-04-25 at 6.31.55 AM.png

    To be clear, in time, I tried to understand this point, I tried a lot of things both of these boxes. I tried the URL of the Site, with and without www amandaasher.com area.

    And for the record on the server. At first, I took this quote from the article mentioned above literally "folder is the web directory provided by the hosting provider. This field may be pre-populated; If it does not match the information of your hosting provider, be sure to update. »

    Well, it was not filled prior to me. So I looked on my host site and saw this:

    Screen Shot 2015-04-25 at 6.32.20 AM.png

    Literally, it says "web directory" and look folder-ish, so I went that in. However, I'm unclear if they intend for me to replace it by "username" to my current username, or leave the word username? So I tried both ways. I also tried as well the top of the page "web directory" (with my user name and the user name Word) and the directory "logs" (still no idea what I'm doing)

    None of them worked, so I tried some examples I could find online. It seemed the thing most common people used 'public_html', but also 'www' and 'httpdocs '.

    I tried all of these things in combination with all these other things.

    As you can imagine, I was several prompted several times by Adobe Muse that these records did not exist, did so I want to create? I said yes. There are many many files at the time wherever I am and still nothing shown on my Web page.

    All these exported completely, but they give me a warning at the end that he had "unexpected response to the query php html" or something like that (I didn't make a screenshot of this, and I get is this message). -What it means and how to fix it?

    I'm not getting that error, but now (since I went with FileZilla and tried to remove a bunch of stuff), I'm stuck in a loop when I try to send the download to your FTP host, it is said:

    Screen Shot 2015-04-25 at 6.51.04 AM.png

    Seriously, I really think that I messed up. I really just want to start again, but I need to know how to do properly, of course. How can I give me a clean slate to work with?

    Sorry, I'm completely new to this and am fexperienced in.

    Finished figure out but don't know how to delete this.

    For anyone else having this problem, the file on the server for DreamHost was my URL without www and with a / after: amandaasher.com.

    Problem solved.

  • Error number: 0x800CCC0D, the host 'POP3' could not be found. Please make sure you entered the server name correctly in Outlook Express 6.

    Original title: "POP3" server could not be found...

    I get the following error message every time I try to use Outlook Express 6 as my default email: 'the host 'POP3' could not be found.  Please check that you have entered the server name correctly.  "Account: 'POP3', server: 'POP3', Protocol: 'POP3', Port: 110, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D".  I have a Dell Optiplex GX110 desktop computer with a processor Intel Pentium III (996 MHz, 256 MB RAM).  I already know that I have to increase the amount of RAM, but I don't think this is part of my problem.    I am connected to a local network, Verizon (Internet, cable TV and phone package). I run Microsoft Windows XP Professional (5.1.2600) 2002 with service pack 3 version.  I check frequently that my system is configured to automatically receive all updates for Windows XP more updates from Microsoft.  QUESTION: Is there a version of Microsoft in September 2011 that had something to do with POP3 servers?  Obviously it did not automatically installed in my computer.  I even checked my system twice to make sure that Microsoft was on my list of safe sites.  Please help me.  I really want to use Outlook Express 6 as my default email.

    Thank you!
    George Raynes

    Hi GeorgeRaynes,

    1. were you able to use Outlook Express 6 correctly previously?

    2 have you made any hardware changes or software on the computer before this problem?

    You can follow this link & check if the problem persists:

    Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express

    Hope the helps of information.
    Please post back and we do know.

  • 500 Internet Server error, it means the host has crashed?

    Hi all

    I just set up my environment development OFA, I tested the connection successfully, and I configured the connection of execution.

    When I try to run a simple Hello World page, I get this error

    erreur.png

    I googled the error and found that it could occur because the server crashed. So I contacted the Director of the project, he said that it might be something else, not necessarily the server crashing.

    Could you please tell me what can possibly be the cause of this error?

    Kind regards

    Afaf

    Afaf,.

    You have the connection to the basis of work by using the IP address or by adding an entry in the host file?

    If you have not entered the entry in the host file, please, add that and try.

    Otherwise, open the dbc file and replace the DB_HOST entry in that IP address.

    It will be useful.

    See you soon

    AJ

  • Error loading. The referenced object is not found

    Hi all

    When I open my file .jws created and complie project, it gives the error

    Error loading.

    Object:xxlc. Oracle.apps.OKC.Articles.lists.Server

    Project:D:\JDevelop10g\jdevhome\jdev\myprojects\XXVariables.jpr

    The following defined or objects to objects that cannot be found:

    xxlc.oracle.apps.okc.articles.lists.server.XXLCCreateListValueVO


    Not found the objects referenced below:
    xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVariableListValuesEO


    All the files are present in the respective folders, so why this error is coming?

    Help, please.

    Thank you
    SK

    XXVariables.jpr, first of all, click on the file--> open, locate the file and click OK.

    Thank you
    -Anil

  • Error loading of the PKI

    I am trying to create a PKI transaction, but when I try to record gives an error that cell does not support intercompany transactions.

    Thanks in advance

    I think you're confused with inter-company balances inter-company transactions. Intercompany transactions are entered daily (operations) which are loaded into the module HFM intercompany, that is the place where you try to create transactions. Intercompany balances are one year the amounts are not loaded in the transaction module.

    Varun

  • the host key fingerprint verification failed when converting to a linux machine

    I use the 6.0.0 converter to convert a machine physics linux vm. I get the following error repeatedly. He is always stopped at 3% after 3 minutes

    MSG = "a general error has occurred: # XYZ.mit.edu SSH - 1, 99 - OpenSSH_4.3.

    -> # SSH-1 XYZ.mit.edu, 99 - OpenSSH_4.3

    -> # SSH-1 XYZ.mit.edu, 99 - OpenSSH_4.3

    -> The authenticity of the host that XYZ.mit.edu cannot be established. Welcome to the fingerprint of the key xx:xx:xx:xx:c7:5f:23:34:d7:2 c: 79:7e:77:92:3e:e6 verification failed.

    '--> (return code 1).

    I have spent many hours on this but could not understand it. I tried a Linux physical different and got the same error. I have no problem connecting to the physical machine XYZ.mit.edu outside the converter. The converter contains plink program under C:\Program Files (x 86) \VMware\VMware vCenter Converter Standalone, I can run plink for the physical server XYZ.mit.edu to store the fingerprint in the cache and it connects fine.

    I have no idea whence the SSH-1, 99 - OpenSSH_4.3 in the error message. The physical server XYZ.mit.edu will OpenSSH_5.3p1. Here is the/etc/ssh/sshd_config on the physical server entry


    # cat sshd_config | grep - v #.

    Protocol 2

    SyslogFacility AUTHPRIV

    PasswordAuthentication yes

    ChallengeResponseAuthentication no

    GSSAPIAuthentication Yes

    GSSAPICleanupCredentials Yes

    UsePAM Yes

    AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES

    AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT

    AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE

    AcceptEnv XMODIFIERS

    X11Forwarding yes

    MaxStartups 10

    Subsystem sftp/usr/libexec/openssh/sftp-server

    Anyone know how to bypass this error?

    Thank you very much!

    Hello

    It is possible that the help of the virtual machine cannot solve XYZ.mit.edu. You can try a ping of VM, another in the same VM to check network.

    If this is the case, use the IP address of the source computer.

    HTH

    Plamen

  • Oracle Grid11g on Linux el5 connection to the host as a user failed

    Hello

    I have 11g Linux oracle grid control.
    I have configured to monitor a target (Oracle 10 g server) on solaris 10, but I'm not able to plan backups.
    "" I get error * "failed to connect to the host as a user."
    I provided the oracle for the solaris user account details.

    I tried to connect to normal Enterprise Manager for the oracle 10g database and the identification of the host information has been validated.

    Can you advice why even host credentials failed on the grid?

    Help, please.

    Did you run root.sh after the installation of the agent software?

    If this is not the case, stop the agent and run the root.sh as user root script. Then, start the agent and try again.

    Concerning
    Jomon

    Published by: JohnJomon on November 10, 2011 11:42

  • The TCP/IP connection to the host localhost, port 1433 failed.

    Hi, im using sql Server2000,
    I said this in my program:
    Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
String url = "jdbc:sqlserver://localhost:1433;databaseName=Factura";
Connection conn = DriverManager.getConnection(url,"sa","");
    and gives me this exception:
    run:
Got an exception! 
The TCP/IP connection to the host localhost, port 1433 has failed. 
Error: "connect timed out. 
Verify the connection properties, 
check that an instance of SQL Server is running on the host and accepting TCP/IP connections at the port, 
and that no firewall is blocking TCP connections to the port.".
com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host localhost, port 1433 has failed. 
Error: "connect timed out. Verify the connection properties, 
check that an instance of SQL Server is running on the host and accepting TCP/IP connections at the port, 
and that no firewall is blocking TCP connections to the port.".
        at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(SQLServerException.java:171)
        at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(SQLServerConnection.java:1033)
        at com.microsoft.sqlserver.jdbc.SQLServerConnection.login(SQLServerConnection.java:817)
        at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(SQLServerConnection.java:700)
        at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(SQLServerDriver.java:842)
        at java.sql.DriverManager.getConnection(DriverManager.java:582)
        at java.sql.DriverManager.getConnection(DriverManager.java:185)
        at factura.FacturaView.conexion(FacturaView.java:317)
        at factura.FacturaView.jTextField1KeyPressed(FacturaView.java:268)
        at factura.FacturaView.access$900(FacturaView.java:41)
        at factura.FacturaView$5.keyPressed(FacturaView.java:150)
        at java.awt.Component.processKeyEvent(Component.java:6225)
        at javax.swing.JComponent.processKeyEvent(JComponent.java:2801)
        at java.awt.Component.processEvent(Component.java:6044)
        at java.awt.Container.processEvent(Container.java:2041)
        at java.awt.Component.dispatchEventImpl(Component.java:4630)
        at java.awt.Container.dispatchEventImpl(Container.java:2099)
        at java.awt.Component.dispatchEvent(Component.java:4460)
        at java.awt.KeyboardFocusManager.redispatchEvent(KeyboardFocusManager.java:1850)
        at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(DefaultKeyboardFocusManager.java:712)
        at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(DefaultKeyboardFocusManager.java:990)
        at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(DefaultKeyboardFocusManager.java:855)
        at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFocusManager.java:676)
        at java.awt.Component.dispatchEventImpl(Component.java:4502)
        at java.awt.Container.dispatchEventImpl(Container.java:2099)
        at java.awt.Window.dispatchEventImpl(Window.java:2478)
        at java.awt.Component.dispatchEvent(Component.java:4460)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
        at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
        at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
BUILD SUCCESSFUL (total time: 34 seconds)
    How can I solve this?

    Thank you...

    Edited by: derok December 8, 2010 13:31

    Edited by: derok December 8, 2010 21:14

    Edited by: derok December 11, 2010 13:51

    Edited by: derok December 11, 2010 13:52

    There's a sqlservr.exe is listening on port 1025:
    What is the process (sqlservr.exe) that I need to connect to?

    Obviously. Have you tried?

  • Upload the host ftp - error 503 "you are not connected.

    Really wrong with this - my upload (for the joint hosting server) crashes at about 60% giving the reason above. The site files are in total 232 MB (great site) and my broadband download speed is shocking (about 30 kb up... Yes KB!)

    will be ftp 'time out '?

    My other sites are loading fine but problems with www.brookstreetschool.co.uk.  I had added somewhere in the region of 10 new slides that had quite a few images in them, but they were all web optimized - until the site was fine, now, it won't download - tried 4 times now over 2 nights.

    Any help or advice would be welcome.

    Alan

    Looks like that due to slow download speed (or more high latency), the FTP connection to your third-party host breaks eventually disconnecting you (disconnected from the FTP server) and resulting in an unavailable error of 503 (Service).

    http://pcsupport.about.com/od/findbyerrormessage/a/503error.htm

    Are you able to test this on a more fast/stable network in upload may isolate the problem to your network? Or are you able to export the HTML site and download using a third-party FTP client? Take a look at the article above, as well for the common to try in this case fixes.

    Thank you

    Vinayak

  • Muse of Adobe won't let me load my web host FTP...

    Screen Shot 2014-12-19 at 19.47.59.png

    What is c? What can I do?

    Try to remove the domain name of your host server, and then add it again. Otherwise, delete all files related to this Web site on your server and then re upload.

Maybe you are looking for