Impossible to get "to Host FTP Upload" to work.

Similar Questions

• Impossible to get all the e-mails at work... worked yesterday... doesn't work not today

  can go on msn... click on hotmail... will go to the site to connect but will not download the hotmail page... also my homepage to another location of e-mail... same thing let me identify you but do not download the site/page...worked yesterday... November 7... but don't work not today...

  Hi Schuylerwoods,

  Since you are facing problems with your Hotmail account, you can publish your application in the Windows Live forum to get help:

  Windows Live Support

• Impossible to get scanner HP scanjet 8250 to work with Windows 7

  Just bought a new laptop with Windows 7. I downloaded the driver for my scanner HP scanjet 8250 HP site, but it won't work. Any ideas anyone?

  writing in the new message: * e-mail address is removed from the privacy... *

  Just bought a new laptop with Windows 7. I downloaded the driver for my scanner HP scanjet 8250 HP site, but it won't work. Any ideas anyone?

  What version of Windows 7 do you have? It is 32-bit or 64-bit?

  Have you tried HP support? According to http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=214599&prodTypeId=15179&objectID=c01909569 here, there is limited support for the 8250 under Win7, which is their way of saying, it may or may not work.

  You can get the driver from here http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=214604&lang=en&cc=us&prodTypeId=15179&prodSeriesId=214599&taskId=135 . Simply choose your version of Win7.

  Many HP products are very picky with their installation procedures. I found that the instructions must be followed strictly in the order as listed, or there may be a problem. If the software has already been installed, it is sometimes best to uninstall it, and then try again. Unfortunately, since most of the documents, it seems the 8200 series was designed more for Mac and Windows.

  I wish you only good luck :-)

  SC Tom

• Impossible to get "Hello World" AIR app to work in 3 SDK BB10

  I followed the instructions here:

  https://developer.BlackBerry.com/air/documentation/BB10/create_your_first_application_cmd_ms_2010847...

  and here:

  https://developer.BlackBerry.com/air/documentation/BB10/testing_your_application_cmd_ms_2010851_11.h...

  Lhen I compile and run the application using:

  amxmlc Example.as

  BlackBerry-airpackager-package Example.bar - installApp - launchApp example - app.xml Example.swf bar - descriptor.xml QNXSkins.ane QNXDevice.ane QNXNetwork.ane QNXSensors.ane blackberry-tablets - icon.png - device 192.168.64.131 - password playbook

  ... I get a white screen with no text on this subject.

  If I follow the instructions "To debug your application using the command line" on the next page, then I get:

  E:\Users\Daniel\Dropbox\Apps\BB10Example2>fdb
  Fdb Adobe (Flash Player Debugger) [build 23201]
  Copyright (c) 2004-2007 Adobe, Inc. All rights reserved.
  (fdb) run
  Waiting for player to connect
  Drive connected; session starts.
  Set breakpoints and then type "continue" to resume the session.
  [SWF] qnx.fuse.ui.skins.QNXSkins - 603 349 bytes after decompression
  [SWF] Example.swf - 458 642 bytes after decompression
  c (fdb)
  Exception [fault], information = TypeError: Error #1007: instantiation attempted on a non-constructeur.
  Fault, createCSS() to ThemeWhite.as:25
  25 / / code goes here
  (fdb)

  Finally found the problem. You were very much on the right track:

  I must have installed the SDK before, because there is a directory ' blackberry-tablets-sdk - 3.0.0 "here:

  E:\Program Research In Motion\blackberry-tablet-sdk-3.0.0

  When I installed the most recent SDK, a few nights ago, I noticed that the name of the directory was still "blackberry-tablets-sdk - 3.0.0 ', so big.

  Then bam, these problems.

  I finally discovered is that the more recent program default installation:

  Research In Motion (x86)\blackberry-tablet-sdk-3.0.0 E:\Program

  Notice something?  No more than I have, but:

  E:\Program Research In Motion\blackberry-tablet-sdk-3.0.0

  =!=

  Research In Motion (x86)\blackberry-tablet-sdk-3.0.0 E:\Program

  Why the hell would they changed the default installation directory?  What this meant was that my build scripts were still referring to the old search directory E:\Program in Motion\blackberry-tablet-sdk-3.0.0.

• Impossible to get background audio on menu to work right...

  Hi Ya'll,

  First I really appreciater all the help I get here, my project is almost complete and I couldn't have done it without your help... Thank you!

  OK, the last thing I want to do before I made my DVD project...

  ..

  I have several menus, each with several buttons. In each menu, what I want TO do is when the menu is displayed,

  background music plays until a button is hit, which sends the user to the destination associated with this button.

  What I did, was to the question menu properties/motion page I linked audio "curly thing" to the .wav file I want used as a background sound of menu... works great... until you ride on a buttons, (with the mouse, in Preview Mode) to which audio tempsThe start everything from the beginning. It is present whenever you move the mouse over the buttons of the...

  This will happen every time a user uses the remote control to move from one button to another?

  Is it possible to have just the background sound play constant until a button is actually selected / "pushed"?

  Thank you

  CB

  This is a bug for a long time in preview of yet. It will work fine on a good DVD player.

  Mylenium

• Impossible to get browser.cache.disk.parent_directory to work

  I tried using the browser.cache.disk.parent_directory method to move my disk cache, but it does not work.

  Details:

  I did a clean install of 22 Firefox on Vista, and then the following instructions, entered: config, created the key browser.cache.disk.parent_directory and he gave the value of a directory that I created.

  Then, I visited many sites different (no, not in private browsing mode), and was preserved he noticed nothing. In fact, the new directory is absolutely empty (no hidden files either).

  Looking on: cache, I am informed:

  Offline cache device
  Number of entries: 0
  Maximum storage size: 512000 KiB
  Storage in use: 0 KiB
  Cache directory: C:\Users\XXX\AppData\Local\Mozilla\Firefox\Profiles\XXX.default\OfflineCache

  And Yes, browser.cache.disk.enable is set to true.

  This is true regardless of whether if I use my account admin with no extension or my standard account with several extensions.

  Advice?

  Last entry:

  Almost by accident, I found the following information of cor - el:
  "In case you use 'Clear history of Firefox closing': do not clear Cache because Firefox will disable the disk cache in this case.

  There are a few cases of use for which it is obviously appropriate behavior, but this is the value default (and perhaps immutable) policy is disconcerting for me.

  In any case, my original question seems answered, even if I strongly hate the answer: no matter where your cache is, if you choose to automatically clear your cache, closing Firefox, Firefox completely disables the cache.

  Thanks to cor - el and stakeholders on this thread.

• Impossible to get the USB flash drive to work

  I have a new Satellite L500 with Windows 7 and it will not recognize/install the USB flash drives. A msg comes up saying "software device driver has been properly installed. I tried several flash drives - they are OK & work on other machines - including an another Toshiba running Windows 7.

  Other devices work in the USB ports, so the ports are OK.
  Windows cannot resolve the problem, I have checked all USB drivers are updated in Device Manager & made a system of analysis of file without success.
  The Bank recommended a reload & restore factory default - other options?

  Have you installed driver chipset?
  Your laptop comes with Vista or Win7?

  You have just upgraded to Vista or Win7 clean setting?

• Qosmio X 300-11 - impossible to get 1080 p @ 60 Hz to work

  I have a Qosmio X 300 - 11s and little matter how hard I try, I can't do 1080 p at 60 hz.

  In fact the time is not yet available. I choose only 24 p or 30 p on my Full-HD is displayed even if they take over 50 / 60 Hz.
  I have the latest drivers installed for my 9700M GTS, so I'm lost. I'm pretty sure it worked before.

  What could be the problem?

  Hey,.

  Wait a minute, buddy.
  If you connect your X 300 to an external monitor via an HDMI cable, I recommend first connecting cable. Then turn on the monitor or TV and select the appropriate input channel. Finally turn on the laptop and normally it should automatically recognize the HDMI connection.

  If this isn't the case, you can use the FN + F5 key combination to switch between monitors.

  In addition, last Toshiba display drivers should work because they are pre-tested so I recommend this driver.

• Impossible to get Trio A1000 MP3 player to work with Windows XP Pro

  I have an A1000 Trio MP3 player and have a problem trying to download MP3s to it. The computer recognizes the device and says it's working properly, but I see no activity when I try to download MP3s to the unit. I've updated Windows Media Player to Media Player 11, but still have playback in Media Player: "Device Connect" when I try to synchronize files with the mp3 player.
  Any suggestions?

  Your Trio is plug-and-play. So, go into Device Manager and uninstall all your USB hubs.

  Re-start.

  XP will be re-installed the necessary software automatically. Once everything has "calmed down", plug your Trio. XP will install the software (again).

  You should then be able to sync.

  No: If you have any USM devices that need to install specific drivers, just plug their and XP will do what is necessary. If not, install them manually.

  If this does not work, go back to WMP10, then re-install WMP11.

  See you soon,.

  Jerry

• Impossible to get a simple button flash to work, please help

  Hello

  I do not know action script and created a flash button that opens information when you rollover the button.

  The button works fine, but the entire region - where pop information - also is poping when I rollover this area.

  I don't know what to do. Is there a way to cover this area is not hot or jerky upward when I run you over?

  Thank you

  Lain

  Make sure that zone exists as part of more.  It should not be in the shot or any other framework.

• Impossible to get my page to redirect to work

  Hi, I use 'process form' of mindpalette.com.

  I added a redirect named hidden field and then put in my value as long as the page I need to redirect (see screen grab). But I is still ongoing to Mindpalette results page.

  He was working on a test that I did, but not now. I have no idea what I did wrong.

  The link on my Web site is http://www.denotestationery.com/denote_localroot%20copy/form.html .

  There is no form field 'redirect' on this form. If you forget to download your latest changes?

• Muse error, loading to the host FTP [FTP upload failed: 553].

  Error loading to the host FTP [FTP upload failed: 553]. I use the last Muse and download through it is generated by FTP. I have never had a problem over a year to download updates. Why I get this error? How can I fix this? First time that's ever happened.

  Hello

  Please see the link below. I'm sure that you will find it useful.

  FTP download failed: error 553

  Concerning

  Vivek

• Impossible to download on the ftp host. errors on .htaccess file download

  Passage to the download of a site using Fetch for using the Upload muse to secure FTP tool. Secure FTP settings are OK. I have access to the end host FTP server.

  Muse-error with the message error download file .htaccess file. Error 553. Try again.

  Yahoo is the host. They accept only Secure FTP. All my settings are the same as Dreamweaver says what is good.

  I managed with Fetch for a long time.

  "Try again later" has failed. Help please, thank you

  

  Please see this thread Re: FTP transfer failed: error 553>.

• I have a problem to publish my site, made with Muse cc my host Aruba.  my mistake [has no FTP Upload: 550]

  I have a problem to publish my site, made with Muse cc my host Aruba. my error is [FTP Upload failed: 550]

  Hi Antonio,.

  The 550 error is a message from the server indicating that the account that you are currently logged no has not the required permissions to perform the action you are trying. You can try to download on the wrong directory.

  This is not a specific problem of the muse, I would suggest that you talk to the administrator of the server.

  Kind regards

  Rohit Nair

• I'm not able to use the export to ftp in Muse. When I enter my host, the name and the password, I get a long interlude of the Rainbow wheel, and finally, the message that my host ftp can not be found. I checked the name and it is port 21. Can I export a H

  I'm not able to use the export to ftp in Muse. When I enter my host, the name and the password, I get a long interlude of the Rainbow wheel, and finally, the message that my host ftp can not be found. I checked the name and it is port 21. I can export to HTML and use another ftp client to download (on the same server), but it's tedious and minor changes is painful. Have you come across this and found a solution?

  Yes I have - thanks for thinking.

  Starting to think that it is a computer / connection problem. I had to move the machines to connect to the Adobe forum.   Plu MacBook thin. New macbook dead ends. These seem too coincidental independent.

  Susan