Muse error 'public_html' folder does not seem to point to the site

Similar Questions

• In transfer of file FTP to a third host, I get an error [folder does not appear to point to the site]

  Why this error is launched: "the file does not appear to point to the site.

  Hello

  This error comes usually when you publish your site not in the appropriate folder.

  Can you republish your site to "public_html" folder since it is generally the case that most accommodation use of service to websites default host providers.

  Hope this helps

  Kind regards

  Rohit Nair

• Folder does not appear to point to the site

  I get the error message:

  Folder "(nom dele de dossier dele de serveur)" doesn't seem to be pointing to "(nom de domaine de mon site).

  This seems to be a problem with older versions of Muse, but he was supposed to be resolved. I use Godaddy as a host, and I'm directly copy and paste all the server information. I'm 100% sure that the name of the folder on the server is correct. When I try and click on 'ignore', load as if it were the publishing site, then open my web browser to a "file not found (404 error).

  I could try to prevent this problem and download my site? Any suggestions?

  Hello

  This error occurs when you enter FTP email id created by you, password as username and password.

  Instead, try to connect with your primary Id and password an it should work.

  For clarity, please contact Godaddy and ask your main username and password. (or you can tell them the user name that you use to download files from muse and tell them its not download folder not appropriate, they will check and advise the correct user name and you should be all set.)

  Concerning

  Vivek

• 'Public_html' folder does not point to site...

  I used the Muse for a dozen sites on the same host. "It's the first time that I had this problem: the site will not download and I get the message: 'public_html' folder does not appear to point to the 'http' www.claygoldstein.com site.

  Interesting note, after several attempts the downloaded site but I still have the error message. Now, I've updated the site and it toward the high load, updates cannot be consulted... same question.    Thanks for any help I can get...

  

  Can you check the solutions in this post on the forum folder does not appear to point to the site and let us know if they helped?

• Why my Muse formatting does not disappear when I open the site in DW CS6? I need to change the PayPal shopping cart code to account for my shipping options. I exported the Muse test in a folder and then created a new Site in DW using this file, so any CSS

  Why my Muse formatting does not disappear when I open the site in DW CS6? I need to change the PayPal shopping cart code to account for my shipping options. I exported the Muse test in a folder and then created a new Site in DW with the help of this file, so all CSS should be there, but I don't see on the page about the elements without formatting, any stop to the left. Thank you!

  PS: Muse will be the most impressive program ever when they fix these bugs or drop because not every user will be paying through the nose for Business Catalyst. Grrrrrrrrr.

  Best approach would be not to use the PayPal widget and instead copy and paste the PayPal code embedded in an object > object to insert the HTML in Muse. This way you can edit the HTML code to embed PayPal code from Muse and without having to modify the exported code.

• Backup Windows XP does not seem to be clear the attribute archive when you perform a normal backup.

  Backup Windows XP does not seem to be clear the attribute archive when you perform a normal backup.

  I do a backup of the 'Normal' at the beginning of the month.  Then, at the end of the first week, I do a "Differential" backup (using the same "backup job" but change to type "Incremental".)

  Well the difference is huge and to study, I see that a lot of files that I don't know that I didn't take the week since the 'Normal' backup have the Archive attribute set.

  Is the 'Normal' compensation not the bit mode backup of archive?  Another thing would be randomly set the attributes to archive?  Is there a ghost in the machine?  Inquiring minds want to know.

  Hello

  Differential backup marks files as having been backed up (in other words, archive attribute is not cleared). This is normal.

  For more information please visit:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/types_of_backup.mspx?mfr=true
  http://msdn.Microsoft.com/en-us/library/aa174458 (SQL.80) .aspx
  http://msdn.Microsoft.com/en-us/library/ms345448.aspx

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I can not connect on DPS App Builder. This error occurs: ERROR this account does not have permission to access the App generator. Learn more about how to fix this.

  I can not connect on DPS App Builder. This error occurs: ERROR this account does not have permission to access the App generator. Learn more about how to fix this.

  Then you need to either:

  (1) sign up for cloud creative then you can build a simple edition approx. attention however: this approach will no longer valid as of May 1, when we withdraw support for a unique creative cloud and unique edition apps are only on devices iPad.

  (2) sign up for a full license of DPS. You can request information on prices using Adobe | Request for consultation.

  Neil

• Thunderbird seems to be corrupted, with a wide range of problems (e-mail folder does not open it, names of the attachments not displayed,...) CAUSE: McAfee Antivirus

  Problems include:

  • By clicking on an e-mail folder does not open it - open in new tab works
  • Names of the attachments are not displayed. Clinkg on the trombone does not open them. "Open all the ' works
  • Sometimes, if I click on an email in the message (?), disappeafrs message pane, and then as I move the cursor to the bottom of the list, they all disappear

  I have restored my pc (Win 8), performed drive controls, run Malwarebytes and virus checks and found nothing.
  I've uninstalled and reinstalled TB several times without success.

  Stuck!

  • First of all I would like to get rid of McAffe. ALTOGETHER. Personally I don't like, but mostly because that its been the center of TB problems.
  • Then download and use MozBackup to save your settings.
  • Copy %appdata%\thunderbird\profiles somewhere for additional security.
  • Remove the data (% appdata%\thunderbird) and tuberculosis
  • Install of TB (download of support.mozilla.org/en-US/products/thunderbird do not create all the accounts.
  • Mozbackup allows you to import your settings.

• My HP printer does not seem to connect with the cartridge world ink cartridges.

  My HP printer 6310v all in one does not seem to allow the use of cartridges per Cartridge World.  It gives an error of cartridge indicating the cartridge must be replaced and not allow any impression at all.  Help!

  The reliability of the charging/reman cartridges varies considerably, but is generally low, see here for a study.

  The steps described on this page can help.

  I suggest you contact Cartridge World for a warranty replacement or chalk it upward to experience and get a HP cartridge.

  (HP printers releases no cartridges because they are charging/reman, but they make an electric test to make sure that the cartridge is not working properly.  They will reject cartrdiges that do not pass this criterion.)

• Multisim 12 - by clicking on the button "stop the simulation", does not seem to turn off the circuit

  Greetings.

  I recently installed 12 Multisim and have not changed the basic operational parameters, I know...

  Shortly after installation, the application is an update.

  Your help is apprecaited to understand what is happening...

  Steps to recreate:

  1. start multisim.

  2. open a very basic circuit that includes a battery 10V with the ground, a lamp, a voltmeter between the lamp and an ammeter in series.

  3. use 'switch' at the top right of the appliation multisim window to run the simulation.

  4 lamp shows a 'enlightenment' and voltmeter indicates 10V and ammeter indicates .1a circuit.

  5. use the switch to stop the simulation.

  6. no change in the circuit or lighting of the lamp measures.

  7. same results if the simulation starts the arrow and the red square are used to start and stop.

  If I close it and reopen it circuit, the circuit begins in the OFF state, but will not OFF If when you select stop simulation.

  This is the case with several circuits, those provided by the College and the other that I created based on the same design.

  Multisim restarting has no effect to correct this observation.

  It doesn't seem normal that when the simulation running, values or apparent lamp lighting does not change.  The simulation doesn't have to go back to the start state (OFF) when I stop the simulation?

  I captured the homerun status after stopping the simulation.

  Thanks in advance for your help.

  Zan

  Hi zanzarista,

  Multisim retains the values for everything in the circuit when the simulation is stopped. Which means that you are able to view the values on your instruments (such as multimeters) even after the termination of the simulation. When you start a simulation once again, starts all over again and that's why you see a 0 momentarily.

  It is the way in which the software is intended to work.

  I hope this works.

• The manual focus ring on my zoom EF-S 18-135 lens does not seem to indulge in the optics to change orientation

  The manual focus ring on my Canon 18-135mm EF-S is free to turn if the switch is in the position AF or MF. It does not change the focus. Auto focus works well. Another objective of zoom seems to allow a manual focus without difficulty. What have I forgotten?

  What is the new version of the STM or the old version non - STM of the 18-135?  It will make a difference in the operation of the focus ring.

  If this is the version non - STM (original 18-135), then you should _not_ attempt to focus of the lens manually with the switch auto focus mode AF.

  If it's the version of the STM (new 18-135) then you can rotate the focus ring if the switch of autofocus is AF or MF (but it wont focus unless the unit is on and not asleep.)  For example press the shutter button halfway to reactivate and work the focus ring).

  Most of the USM goals (there is no version of the 18-135 USM) allow the ring to be returned if the device is in AF or MF mode.  The ring is basically a like a sweet clutch and there a few deliberately built sliding- and these rings of just development will keep turns and turns... There is no hard stop for the ring.

• "error rundll32" dougknox does not work, no cd of the os

  dougknox does not work, no just upset os cd

  Hello
  • When you receive this error message?
  • What were the changes made before the problem occurred?
  • You use a program that is causing the error?
  I suggest that you follow these methods and see if the problem still occurs.

  Method 1:

  Perform the check and the boot if the problem persists.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: Follow the steps in the article to restart your computer as usual.

  Method 2:

  Perform SFC scan and check if the problem is related to a corrupted system file.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

• Hello. Coding CSS does not work with v16. The site is something I coded myself. He managed the validation of HTML and CSS. Cleared cookies & restored to ltvds back.

  The code works in all other browsers.

  I appreciate all the work you are already doing and any help looking for a solution to this problem.

  Thank you.

  Firefox does not load the CSS (CSS/style. CSS)

  The character encoding of the plain text document has not been declared. The document will be made with text truncated in some browser configurations if the document contains characters from the US-ASCII range. The character encoding of the file must be declared in the transfer protocol or file needs to use a byte as a signature of coding order mark. @ http://www.shelflifemagazine.com/css/style.css

  Try to remove the attribute type for the CSS file.

  You have:

  <link rel="stylesheet" href="css/style.css" type="type/css"/>
  

  Use it instead:

  <link rel="stylesheet" href="css/style.css" />
  

• F2 and entry does not on certain pages of the site, except if the field selected

  F2 and entry does not not to go backward or forward on certain pages of the site unless field selected. It is on an intranet site after reload PC with Windows XP, other old Windows XP PC work.

  Including the Firefox Firefox 10.0, or 11.0 9.0 upgrade fixed this problem with the program code of the intranet for keys F2 and Enter to forward and back a page in the application of the intranet site.

• Update does not accept my password if the site only

  I can connect on the Web site very much and I can edit my account etc information but the creative cloud app will not let me update Indesign. It does not accept my password. I tried to change the password that doesn't work. Help! (please)

  Nodessa operating system that you are using?   The password you are be prompted for is likely for an administrator account on the computer.  It's the same connection you use to connect to your computer.