Muse, moving the scroll effect opposes 20 px right when using anchors

Similar Questions

• One of the pages of my site moves to the right when using anchors to scroll. I checked for Ghost off the page boxes and checked that all my 100% width images are actually 100%. I discovered that this problem is in Chrome and do not hap

  One of the pages of my site moves to the right when using anchors to scroll. I checked for Ghost off the page boxes and checked that all my 100% width images are actually 100%. I discovered that this problem is chrome and does not happen in Firefox. Any suggestions?

  Thank you Brad, my ankles were lined up however they were in the Center. I am proposing to-100 and it solved the problem. Thanks for your help.

• Need help to set the values of the scrolling effects in Muse

  Hello

  I'm working on a new Web site and I have a created a strip behind my menu I want to scroll down and line up with the menu to each anchor point for every article on the site of the only page I've created. I applied the correct values for the scrolling to the first anchor point successfully, but now I have a problem of adjustment to get the same effect for the second anchor.

  Help, please. I've included a link to my site published the catalyst for the company.

  Thank you!!

  Paul Normanhttp://indicted-scrolltest-1-7-15-2015.businesscatalyst.com

  When you use the scroll effect, you don't have the ability to create more than two "key frames" (first motion motion / final). The effect sought to achieve would need to have several "key frames".

  The effect of what you want, you need to create several bars and making them appear and disappear for each sector.

  Or you could PIN just the bottom bar to a specific location on your site, unfortunately there is no movement that you are after,

  but it can be positioned correctly.

• How can I change the key of a lunch without losing the words in my karaoke VanBasco window when using cakewalk pro audio.

  Original title: Using cakewalk pro audio

  How can I change the key of a lunch without losing the words in my karaoke VanBasco window when using cakewalk pro audio. Can anyone help please

  Hello

  What operating system is installed on the computer?

  Contact Cakewalk for assistance:

  Here is the link: http://forum.cakewalk.com/default.aspx

• When you use the plan of photography can I be connected to the internet all the time? Data are always deducted when using Photoshop or Lightroom?

  When you use the plan of photography can I be connected to the internet all the time? Data are always deducted when using Photoshop or Lightroom?

  You should not have a permanent internet connection.  You should only be connected when the software must check whether the subscription is still valid.

• The second image lost in CAN communication when use card NI PCI-CAN/XS2

  I recently had a problem on CAN communication.

  I need commmunicate a Cluster with CAN BUS, baud rate is 500 Kbps, the BOX is card NI PCI-CAN/XS2. The operating system is Windows XP.

  normally, the PC send a Cluster command, then reread a frame of data of the Cluster, but for some controls, the Cluster will return two data frames, and the program on PC cannot receive the second frame, he lost.

  I searched the forum, most of her results is the overflow of CAN BUS error, which make the CAN setting lost, but there is not an error on my program report and baud rate is not that fast, I also use another port of the NI PCI-CAN/XS2 to monitor the bus CAN, the second frame of data never appear When I can replace NI CAN map vector CanCaseXL (CAN card) and call of CanCaseXL DLLS in labVIEW, it can get the second CAN fit, the vector CanCaseXL monitor can get the second image data also.

  Yes, is there a software/hardware configuration must be done to get the second block of data?

  the attached photos are NOR-CAN/vector ALLOWS to follow and CAN init/write & read in my program.

  Any reply is appreciate! Thank you

  Hello iwantofly014,

  I don't know that the framework is not lost.

  Could you post your code?  In particular the data Get VI?

  Also, can you make an indicator of the output of the ncReadNetMult?

  It seems you are trying to implement the UDS and KWP2000 Protocol.  Is this possible?  We have a product that already implements these two protocols and really simplify this type of application.  Its called the Automotive Diagnostic command set.

  Have a great day.

• RMAN and 05500: the auxiliary database must not be mounted when using DUPLICATE

  Hello
  
  Oracle10g2
  RHEL4
  
  The artist DR configuration using RMAN backup.
  
  There are two db Server computers:
  
  1) mac1-> backend
  2) mac2-> backup server
  
  File structure of database as a backup on the server location is the same.
  
  Entry TNSNAME on both servers are perfect, verified using tnsping.
  
  
  Now, to create a backup database.
  
  I made the RMAN backup on mac1 (main server) then transferred backup (full backup directory) to mac2 (backup server)
  
  Then, on the standby server,
  
  -> took on the eve of the database in nomount mode
  --> connected to the target database (i.e. standby db) with RMAN
  -> database connected to auxiliary
  
  But the granting of "Duplicate" command results in the error, as shown below:
  
  RMAN > target database double standby nofilenamecheck dorecover;
  
  RMAN-05502: the target database must be mounted on the issue of a duplicate order
  
  and when I put the target database (standby db) in the editing mode, gives the error below:
  
  RMAN and 05500: the auxiliary database must not be mounted on the issue of a duplicate order
  
  where I did mistake? How to solve this problem?
  
  
  Concerning

  Hello

  There is nothing wrong

  target (in fact the Pb of the source) must be mounted
  auxiliary (actually the destination db) can not be mounted.

  These messages refers to the source and destination db. from 11 g, you can duplicate opensource db (a.k.a. target)

  P.

• Muse CC Trial Version the scroll effect does not, it is grayed out.

  I just downloaded the Trial Version of Muse CC and I'm playing with the features of Muse CC and I noticed that I can not use the position function key or scrolling movement.  Y at - it something I'm doing wrong or it is not available in the Trial Version?  This is what it looks like when I try to use it:

  

  No, the trial version has a time limit, no restriction of the service.

• Why the scroll bar arrows disappeared from Firefox when I upgraded from Fedora 17 to 18 years?

  Recently, I upgraded from Fedora 17 to 18 of Fedora. Before the update, Firefox worked perfectly. Now, the arrows have disappeared of the scrollbar on the right. How can I get back them?

  This problem is not moved in other applications - in Firefox.

  Alternatively, you can check for problems with the file localstore.rdf.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

  Do you have a scroll bar (that is, only the buttons have disappeared)?

  You use the default theme of Firefox (Tools > Modules > appearance)?

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem

  Use a type of compressed as PNG or JPG image to save the screenshot.

  You can try to check if another theme or icon pack Linux brings them back.

• Jittering in Safari when using anchors related to scroll the content.

  I recently launched a preview version of the site I've been designing in Adobe Muse CC 2014.2: http://spudniksavannah.com/beta-0.1.html

  A ton of comments that I get Safari users, is that the content appearing on the screen is very "fragile/unstable", initially as they navigate the page using the menu (a Hypertext anchor link keys) or by scrolling (using this widget to anchor wheel of scrolling, downloaded from: scroll wheel on mouse use to navigate between the anchors of Muse - Muse Widget Directory Adobe).

  At first I was worried, it's the widget that was causing the problem, but after its withdrawal, I noticed the problem when you use the anchors of hyperlink out-of-the-box of Adobe Muse.

  I am a user of Google Chrome first and scrolling looks fine in my browser.  I didn't know that this problem existed even before receiving your comments in my test group, but apparently the site has a similar problem with Firefox browsers as well.

  Once the site is launched I expect all sorts of users with a variety of different experience levels (and browsers) to visit the page, so it could develop a relatively minor annoyance for me, in a pretty major distraction to others.

  Any suggestions/insight would be greatly appreciated.

  Thank you

  Chris

  Please refer to the similar topic here:

  https://forums.Adobe.com/message/6416723

  Thank you

  Sanjit

• Ms. Comfort Mouse 6000 presents itself as Comfort Mouse 4500, so the scroll wheel does not work right.

  Hello, I would like to explain the whole situation.

  I tried already to Microsoft support and they did not / were not able to help.

  I have three mice:

  (1) comfort Mouse 6000 for business, white

  (2) comfort Mouse 3000 for businesses, white

  (3) comfort Mouse 3000 (commercial version), black.

  The 1 and 2 appear in Intellipoint and Windows 7 64 - bit (Devices section and printers) as Comfort Mouse 4500. 3 however presents itself as the correct model (3000). 3. scroll wheel perfectly works (it's instant and smooth). 1 and 2 scroll wheels don't move unless I really push on this issue, and even then it only moves a little at a time.

  I uninstalled however Intellipoint at some point and 1 (tried 2) will work as it should (instant scrolling and smooth), however I can not change the side buttons.

  Any help? Thank you!

  Hello
   
   
  Given that the same problem occurs in different computer, the problem here lies in the mouse. I suggest you to contact the Broken/defective product group for further assistance.
  http://www.Microsoft.com/hardware/en-us/support/contact-us
  Broken or defective products
  
  For the quick replacement of the broken or defective product, call warranty directly: for warranty in the United States support, call the 800-360-7561. For Canadian assistance under warranty, call the 800-933-4750. Or see this article for more information: http://support.microsoft.com/kb/326246

• I am trying to download the pre-release version of Muse featuring the new sensitive design features, but whenever I use my Adobe Cloud identification information, I get the following error: to participate, you must be a subscriber to the creative cloud or

  I tried my login from the main account as well as the journal to my creator and no luck. I already have the current version of installed Muse.

  localsearchessentials please try to connect to http://museprerelease.com now. We brought a change in support of your Adobe it identification code should now work. Sorry for the inconvenience.

• What is the most effective way to update tables when converting the RTF to FM 9.0?

  Hello once again, editors.

  My procedure:

  1. Word doc saved. Rich TEXT format and opened it in FM 9.0.
  2. Imported from all formats from an FM file,
  3. Used a third-party plugin or MIF to replace paragraph styles.
  4. Remove all the styles from Word of left-over of the FMP catalog.

  Problem: Doc contains dozens of tables, which came the format of unknown table 'Table' (in the table designer). In the MIF file I changed all instances of < 'Table' TblTag > to < TblTag "DefinitionsTable" > with good results - except that they are wide 6.5 "all and I need them to be the usual width for this format of table (5.75").

  Click Table > resize columns and the option button "by the scaling to the width for a total of 5.75" is already selected, so all that I have to do is he reapply by clicking on the button resize in this dialog box. The table snaps in the right size and position, everything is fine - except that I have to do this same procedure around 9 zillion times. So what I need is a faster way to do the same thing.

  Here is the table format in the MIF, but it represents only two columns (Num Num 1 and 0)-probably because this table is defined as having two columns. But the charts that I brought the RTF have three. And curiously, the values for TblColumnWidth for each of these two columns don't total still 5.75.

  < TblFormat
  < TblTag "DefinitionsTable" >
  < TblColumn
  < TblColumnNum 0 >
  < TblColumnWidth 1,22917 ">
  < TblColumnH
  < PgfTag "TableHeading" >
  > # end of TblColumnH
  < TblColumnBody
  < PgfTag "FieldName" >
  > # end of TblColumnBody
  < TblColumnF
  < PgfTag "TableHeading" >
  > # end of TblColumnF
  > # end of TblColumn
  < TblColumn
  < TblColumnNum 1 >
  < TblColumnWidth > 3,30209 "

  I have to do a presentation tomorrow, part concerns the conversion of Word in FM and it is a necessary component. I wish I had seen this problem a couple of days!  All expertise out there on this topic?

  Any suggestions gratefully received

  ~ ~ Gay

  Have you looked at TableCleaner of Rick Quatro, at http://www.frameexpert.com/plugins/tablecleaner/index.htm

  As you found, the problem with the MIF - Bop tables is that not all of the settings are stored in the instance of table, so it can be difficult to make sure that the settings you are looking at other areas are indeed affecting the table 'target' other places. Keeping the table identification numbers straight is the key

  MIFBrowser is an essential element (it works perfectly with FM9 MIF):

  MIFBrowser Wideman

• The behavior of copy (.png files) screen when using TextEdit and printing

  I have long used the method to copy and paste texts and/or pictures to TextEdit and print files .rtf or .rtfd below:

  I use the command-control-shift-4 and the cursor to select things and paste into TextEdit.

  That stopped working in the Sierra.  I tried several methods (PDF format conversion, fall in Pages and Numbers, for example), but nothing worked: the Canon PIXMA MX922 printed on a white sheet and left the box of small characters with text "filter impossible."

  There is no new printer driver on the Canon site; However, there is a new driver IJ Scan Utility and I downloaded it already after that installation of Sierra and the scanner works fine, as also directly print something (e.g. on the Web).

  Now, after several days of testing and I was wondering, I tried this yesterday:

  Instead of the above command, I used (which I do when I want to save it to the desktop) command + shift + 4.  I copied the file .png from office, dropped in the TextEdit, printed, and... IT WORKED.

  Copy and leaving fall directly in the TextEdit and printing, is so not working, but let fall the same screenshot on the desktop and copy and paste into TextEdit and it print shops.

  I noticed several other annoying problems to Sierra, some I've reported here (communities), some didn't.  Business-as-usual: first version of an upgrade is full of bugs, which 'disappear' in future versions, until a new update is made available, the loop continues, continues, and...

  He works here.

• How can I get the clips in record full-time instead of the 25seconds (which seems to be set) when using windows DVD maker

  How can I get the clips in record full-time instead of 25 seconds (that they seem to be defined) using windows DVD maker

  Hi LorraineDawson,

  Here's a walkthough troubleshooting on this issue:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  hope this helps

  B Eddie