Music CD works but nothing so digital photo CD has been implemented

Similar Questions

• I tried to reset my master password and I was told it has been reset, but nothing was told that it has been reset, which is not good at all.

  I followed the instructions in the HELP section, reset the password. Tried to use the email once again, I was told it is the failure of the connection. I tried two passwords I thought that would work; None of them have. So now, I don't know what is the new master password. I don't even know if I can RECEIVE emails. If someone answers it, you can send the answer to two addresses? Mine is [email protected]. The other, in which case I can not mail there, is [email protected]. Any help would be greatly appreciated. Thank you.

  John Varley

  This is the second thread that you have started using 2 different user names. There is no need for this.
  Please continue your discussion in your original thread.
  At least read the answer and do not keep start redundant discussions.
  Here is your original thread.https://support.mozilla.org/en-US/questions/1044480

• Canon printer works, but nothing is printing

  Printer works but nothing is printing.  Do not have an indicator that the ink cartridge is empty.  No warning.

  Hello

  · What is the model number of the computer?

  · Were there any changes made on the computer before the show?

  Check is it y of error codes and error message appears in Event Viewer: how to view and manage the event logs in Event Viewer in Windows XP: http://support.microsoft.com/kb/308427

  You can also follow the steps listed in the link below: printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• Attempt to remove e-mail Messages in Windows 7 Live Mail. Used to work but now get "an unknown error has occurred."

  Attempt to remove e-mail Messages in Windows 7 Live Mail.  Used to work but now get "an unknown error has occurred."

  Administrative events Viewer.

  wlmail (5472) WindowsLiveMail0: page of data read from the file "C:\Users\MyName\AppData\Local\Microsoft\Windows Live Mail\Mail.MSMessageStore" at offset 269484032 (0 x 0000000010100000) (page 32895 (0x807F) the database) to 8192 bytes (0 x 00002000) failed verification because it contains no page data. The read operation will fail with Error - 1019 (0xfffffc05). If this condition persists then please restore it from a previous backup. This problem is probably due to a defective material. For further assistance diagnosing the problem, contact your hardware vendor.

  Hello

  Because the problem is with Windows Live Mail, I suggest you to post your query on the Windows Live community forums to get help.
  http://www.windowslivehelp.com/product.aspx?ProductID=15

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• I used ny redeem code and it worked but its still saying my subscription has expired. The new plan is on my page and my old plan should I trade sort who is active?

  I used ny redeem code and it worked but its still saying my subscription has expired. The new plan is on my page and my old plan that I have Exchange somehow it is turned on

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -If you have more than one email, but of course you use linked to your subscription

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• I want to disable a product but the computer on which it has been recorded on is no longer functional. How can I activate this product on a new computer?

  I want to disable a product but the computer on which it has been recorded on is no longer functional. How can I activate this product on a new computer?

  The product is CS3 Web premium. It was recorded on 2 computers in 1998 and the two are no longer working. I have all the disks and the original serial number.

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

• I was a member of the creative cloud and got a new computer. I tried to remove the creative cloud from my old computer, but it seems that my subscription has been canceled instead. Is there a way I can restart my membership?

  I was a member of the creative cloud and got a new computer. I tried to remove the creative cloud from my old computer, but it seems that my subscription has been canceled instead. Is there a way I can restart my membership?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• How to record on the mixing in mono, 0 db reduction in volume in mp3 64 bps? Sounds simple, but about all the support staff has been able to do.

  How to save on mixing in mono, 0 db reduction in volume, (same volume as in the files-no - 3 dB reduction) to MP3, 64 bits/s? Sounds simple, but about all the support staff has been able to do.

  Several solutions to this problem.  I think that we have discussed on the support email, but I will share this new here so that he can help others as well.

  Firstly, as I have explained in the e-mail, default, hearing support right Pan that prevents content mixed to a stereo field centre to be stronger than the same worn out content far left or right.  This provides one - drop 3dB to center the content by default, but you can disable it completely by entering Preferences > multitrack and by setting the Mode panoramic default to left/right cut (logarithmic)

  

  Now, when you create a new multitrack session, there is an option to specify the captain multiplexing.  Here, you can select Mono, stereo or 5.1 and it will be the mode of multiplexing by default for a mix of base operation regardless of the content of your video, but can be overridden when you export a mix of session.

  

  Then, if you choose the menu item multitrack > Mixdown Session to the new file... always by default is the captain of multiplexing.  This command does not write to disk, is a not preview or pre-processing.  If you want to export your mix multitrack session directly on the disc in the desired format and multiplexing file, use the command file > export > multitrack mixer > whole Session... You will have then the full set of output options, including the entire line output option that you like and the format you prefer.

  

  Here, I have disabled by default 5.1 output and selected a Mono mix instead.

  

  I've now changed the parameters of format as well as MP3, 64K.

  With most of these configuration details, you only need to define their time and they will remain the default values for subsequent projects, except change again.  The dialog box export a multitrack mix will reset the mix options to match the default output and the MP3 settings can be updated to reflect the closest Kbps setting of the sampling frequency of your session.

• nslookup works but nothing else has DNS on standalone PC Win7.

  I can connect to cables and wireless networks, the computer gets an IP address and the gateway and DNS from DHCP server very well and I can connect to things via ip but nothing can resolve DNS nslookup, which seems to work perfectly except. Network and sharing Center shows as 'connected' and 'no internet access. I tried many things, and now, I'm stumped. The problems began when a router has failed recently, several other machines come online when the defective router was replaced, but it never did.

  Some of the things I've tried...

  uninstalled anything that could possibly mess with networking: McAfee, Hamachi, Hello etc.
  has run the McAfee removal tool
  starts in safe mode
  tried multiple profiles
  turned off the windows firewall
  Unchecked
  the DNS 8.8.8.8 manually for each card value
  Set an IP address for google.com manually in the hosts file: ping will not always solve this
  disabled the dnscache service: makes no difference then re-not active it
  netsh int ip reset resetlog.txt: not a no effect and resetlog.txt is never created
  netsh winsock reset
  sfc/scannow: not found corruption
  unchecked ipv6 for all network adapters in the system
  restarted, like, a million times

  CPP, DHCP, DNS Client that all seem to be running.

  Hardware tests very well, no DNS problems with interface either when running a linux boot disk, so there must be software.

  There is nothing in the logs has not already was a problem for several months or is not directly attributable to the lack of connectivity, this problem of network is new from 3 or 4 days. Significant error entries only are, annoyingly, for system restore and VSS which means that the system did not the restore points for several months, and even more annoyingly, fails to restore those what already with a "catastrophic error 0x8000ffff". Embarrassing if it isn't, there was obviously a problem for months without affecting the networking.

  Interestingly under "Access Type:" network and sharing Center, I get "No Internet access", but when I open a browser and go to google via an IP (173.194.37.136) that changes quickly to 'Internet' although I still cannot ping google.

  Other the only thing I found which looks not right is that ipconfig/registerdns does appear the error: "DNS record failed: the RPC server is unavailable" which seems strange as CPP indicates its execution in services.msc and everything seems to be OK. There are a few pages on the web that mention this error but they seem to everyone apply to servers and it is a dell laptop vanilla Win7HP64 running.

  Things that I have not tried...

  relocation of hardware drivers: I tell myself that if it affects Intel Realtek LAN WiFi AND it may not be the drivers for those

  I'm now ideas.

  Help please!

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  I hope this helps.

• I have an Ipad. It has been implemented for eprint airprint, but lately, it does not work.

  HP Officejet 6500 a Plus

  Mac Lion operating system

  Printer not detected from my Ipad

  None

  Hello fjnatwick,

  If I understand you correctly, you could use airprint in the past to print from your iPad. If you cannot see your printer appears when I try to print, try the following steps:

  1. If the printer is still lit, disconnect the power cord from the printer, leave it unplugged for 30 seconds, then reconnect the power cord to the printer. Once connected to the printer should automatically turn on.

  2. turn off iPad completely by pressing the power button on the upper right of the iPad until you see "Slide to power off" and drag your finger on the bar to completely turn off the iPad. Now re - turn on the iPad.

  Try your print job again and see if you are able to locate the printer on your iPad.

  If you are able to locate the printer but nothing happens when you press the "print" key, then try the following steps:

  1 clear print jobs from the print queue on your iPad by tapping twice on the home button. "PrintCenter" icon should appear at the bottom of the screen. Select PrintCenter and delete print jobs by sliding your finger across each task and select "Delete" until they are all gone.

  Now, try again to see if it is able to correctly print your print job.

  If you still have problems, questions, do not hesitate to reply to this message and I'll try to find an answer for you.

• HP Photosmart Premium All in One printer will NOT work to satisfaction with Windows 7, HP has been disabled

  Windows 7 is causing problems with photo printers?  I had so many problems the photosmart HP printer wireless installation.  Whenever it has been installed, the next time I arrived, he would say "cannot find printer.  Best buy told me to NEVER install wireless immediately and later another told me that Windows 7 seems to have problems with wireless printers.  Called HP, they wanted me to install new drivers and then I got fatal errors to try this.  Finally, they had a legal person of HP contact me to tell me that the fatal mistake had to be caused by the problem of WINDOWS 7.  I had to restore to the day, I bought the computer, which was fine because I didn't really have anything worth saving, just a few documents.  When I did, everything seemed OK but I tried to scan a picture and there were points on this subject.  I scanned the same photo to another computer not windows 7 and without stains.  New HP denounces Microsoft Windows 7... saying that it doesn't have the same problems as Vista did, but a WHOLE NEW CLASS of problems.  Why are they not being found and fixed by Microsoft problems?  It's so frustrating, I abandoned and resumed the printer at Best Buy.

  SOMEONE DOES HE HAVE PROBLEMS WITH THEIR PHOTO PRINTERS WORKING ON COMPUTER WINDOWS 7?  IF NOT, PLEASE SHARE WITH ME WHAT PRINTER/SCANNER, YOU HAVE, I WANT TO BUY A SIMILAR ONE.  I won't buy another HP for what, the customer service was poor, 12 hours on the phone and nothing has been resolved but blame Microsoft.  Life is too short.

  Have you tried the printer connected directly to the computer to see if it works correctly? This can help to identify what you need to solve the problems.

  Manufacturers of devices, in this case HP, are responsible for providing drivers for their equipment work. However, the end user is responsible for installing the drivers correctly. In most cases of printer drivers must be installed without the printer is connected to the computer and only connected and turned when prompted by the installation program.

  Also, during installation it is recommended to close all unnecessary programs that are running before installing drivers, and once installation is complete, make a restart.

  I have three printers on my system - two, a Canon Pro9000 and a HP DeskJet 970Cse printer (about 10 years) are directly connected to the main computer and have never had any problems. The third, a Brother color laser is connected through a network and is running smoothly. I do not use all-in-one printers and have a separate HP scanner.

  Depending on the type of team service geek places are concerned, you would be better to go to a computer repair shop and to solve this problem for you.

• __i cud't play a game, so I sent to them. They said I need to reset a program, I found it. but I get link about it has been moved to regesteringsdatabasen then, I open it, but can't reset it when he was there.

  Hello

  I cud't play wow so I sent to them, he said it was because I played on the lan or something

  but I can fix it with open a battleNet. but when I did it. It is said: the program has been moved to regesteringsdatabasen

  but when I opened the regesteringsdatabasen & find the program cant I have reset from there, what to do?

  For support of World of Warcraft, see: http://us.blizzard.com/support/index.xml?locale=en_US (I don't know what version you're talking about, so I can't be more specific).  In fact, all I could find was a page of e-mail support: https://us.blizzard.com/support/webform.xml?locale=en_US - not a telephone number or a chat service.  This is a forum for technical support for WOW: http://forums.worldofwarcraft.com/board.html?forumId=11110&sid=1 where you may be able to find additional help.  BattleNet is something recent (not quite new) support for games (and your user information) and games.  If it works, it should HELP you with these problems, not cause them.  It seems that your installation does not work properly - you can try to do again the installation - do not forget to read the instructions carefully (maybe by first uninstall everything and then re-install) - but I would contact their support email group and/or the forum first to see if they can help you more easily on the problem.

  If this does not work, try the suggestion of Michael Murphy.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• RollbackToSP will be working if the column in the table has been abandoned?

  Hi all
  
  I would really appreciate an opinion on these two scenarios in OWM.
  
  Scenario one
  
  Steps to follow:
  
  
  
  Savepoint1, created may 20
  DIAL THE DBMS_WM. CreateSavepoint ('LIVE', 'RRR_Test');
  
  
  May 21 change us a table with version:
  
  
  DBMS_WM EXEC. BEGINDDL ('users');
  
  
  
  -remove unused column
  
  ALTER table drop column field users_LTS;
  
  
  
  EXEC DBMS_WM.COMMITDDL ('users');
  
  
  
  3 roll back at the point of backup created on 20 may
  DIAL THE DBMS_WM. RollbackToSP ('LIVE ',' RRR_Test);
  
  
  
  
  
  End of the scenario
  
  
  
  Question: Will the OWM correctly changes rollback made to the schema of the table USERS?
  
  
  
  
  
  
  
  
  
  Second scenario
  
  
  
  
  
  1 Savepoint1 created may 20
  DIAL THE DBMS_WM. CreateSavepoint ('LIVE', 'RRR_Test');
  
  
  
  May 21 change us a table with version:
  
  
  DBMS_WM EXEC. BEGINDDL ('users');
  
  
  
  -remove unused column
  
  ALTER table drop column field users_LTS;
  
  
  
  EXEC DBMS_WM.COMMITDDL ('users');
  
  
  
  3 roll back at the point of backup created on 20 may
  (1) add the domain of the column to the schema
  
  (2) rollback
  DIAL THE DBMS_WM. RollbackToSP ('LIVE ',' RRR_Test);
  
  
  
  End of the scenario
  
  
  
  Question: given that the pattern is exactly the same as it was originally, this will work?
  
  
  Your ideas are welcome.
  
  Thank you
  
  Serge
  
  Published by: sbornow on May 27, 2009 11:29

  Hi Serge,

  When you add the column to the table, it will be added to all versions/workspaces for this table. All of the current versions, as well as all the historical lines, will contain this new column with a null value or the default value.

  None of DBMS_WM restore procedures will be affected by the DDL changes, or a restore will return all DDL changes made since the backup was created. A backup point cannot become invalid. The restoration works on the level of the line, based on the columns of the primary key (which is not editable by the DOF). So the resulting table will have the same lines as he did at the time that the backup point has been created, adjusted for any changes in the column that has been done on the non-primary key columns.

  Kind regards
  Ben

• 13.0.1 day saw upward tabs: when I opened a new tab nothing I enter in the address field work. Google and bookmarks work, but nothing to manually enter

  If I open a new tab, I can't enter any address at any site. Well, that I can enter, just at the moment where I hit return the address of the typewritten page disappears and returns to "go to a Web site. Nothing happens. I can use the search box (google) or a bookmark to open a new tab. This tab resulting will be then to accept the entrance and go to the address as I type. The new tab will not do anything.

  Try to open a new window (file > new window) to see if it works.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

  This can also be a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

  You can also try to repair the database of places with this extension:

  • https://addons.Mozilla.org/firefox/addon/places-maintenance/

• Satellite P20 - system sounds work but nothing else

  I have a P20-552 (PSP26E-025E9-S4) which is a little more than two years. This morning he suddenly decided to not play some sounds. System sounds play as usual as do all soundtracks from my video editing software (Adobe Premiere Elements).

  However, when you try to open a file AVI, WAV or MP3 using WMP, I get the following message:

  Windows Media Player cannot play the file because there is a problem with the audio device. It might not be a sound device installed on your computer, it can be used by another program, or it might not work properly

  iTunes gives you a similar error message.

  RealPlayer produces more sound during radio playback. It gives all the possible indications of play station involved, but no actual sound is produced. It was working fine last night.

  The only thing I remember past which was for the first time in four days, when I turned the machine last night the Windows automatic update did NOT install something. For the last four days, he apparently had five updates to perform each time and I, of course, always left the machine in order to perform updates and turns off.

  In Control Panel, I just went in sounds and Audio devices and on the Volume tab, he says no. Audio Device. Under the tab Audio everything is grey I ve a feeling that this is not normal

  In Device Manager there is no indication of any conflicts etc.

  Can someone help me, please?

  I had a similar situation after voice chat through MSN messenger. Remove the sound card in Device Manager, reboot the device and check if it works again. If so, is probably a responsible application of this.

  Which one? Find only.