Satellite P20 - system sounds work but nothing else

Similar Questions

• I have dv7 - 6B 63 and system sounds work but I can't hear any videos or music on the internet.

  Hi, I tried to understand why I get system sounds, but I hear no videos or music from the internet.  No matter what is the browser, or even if it is itunes.  I think it's so weird that I hear system sounds, but nothing else. I have an IDT high definition audio CODEC withd version 6.10.6418.0 driver.

  Thanks, Heather

  Try to install the latest driver IDT Audio take care of page:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5197418#N229

• Satellite A300 - system still works, but the screen is blank

  Hello

  I was downloading an update of tempro toshiba (synco or something in that sense) for my laptop Satellite A300 and the frozen screen. I pressed the power button for 5-10 seconds until it is turned off. When I turned it the system seemed to work but the screen is completely black.

  I tried to remove the battery, and fn + F5 but the screen still won't turn on.

  Any help or advice would be appreciated.

  Rob.

  Hello

  It happened because of the updated BIOS, or during the common software update?
  In case it was an update of the BIOS I recommend contact the ASP in your country, because it seems that the ROM module must be flashed again.

  If it happened during a common software update, so I advise to remove the battery and the AC adapter and wait an hour.
  Then reconnect the two parts and check to see if you could power the laptop properly!

  Check it out!

• nslookup works but nothing else has DNS on standalone PC Win7.

  I can connect to cables and wireless networks, the computer gets an IP address and the gateway and DNS from DHCP server very well and I can connect to things via ip but nothing can resolve DNS nslookup, which seems to work perfectly except. Network and sharing Center shows as 'connected' and 'no internet access. I tried many things, and now, I'm stumped. The problems began when a router has failed recently, several other machines come online when the defective router was replaced, but it never did.

  Some of the things I've tried...

  uninstalled anything that could possibly mess with networking: McAfee, Hamachi, Hello etc.
  has run the McAfee removal tool
  starts in safe mode
  tried multiple profiles
  turned off the windows firewall
  Unchecked
  the DNS 8.8.8.8 manually for each card value
  Set an IP address for google.com manually in the hosts file: ping will not always solve this
  disabled the dnscache service: makes no difference then re-not active it
  netsh int ip reset resetlog.txt: not a no effect and resetlog.txt is never created
  netsh winsock reset
  sfc/scannow: not found corruption
  unchecked ipv6 for all network adapters in the system
  restarted, like, a million times

  CPP, DHCP, DNS Client that all seem to be running.

  Hardware tests very well, no DNS problems with interface either when running a linux boot disk, so there must be software.

  There is nothing in the logs has not already was a problem for several months or is not directly attributable to the lack of connectivity, this problem of network is new from 3 or 4 days. Significant error entries only are, annoyingly, for system restore and VSS which means that the system did not the restore points for several months, and even more annoyingly, fails to restore those what already with a "catastrophic error 0x8000ffff". Embarrassing if it isn't, there was obviously a problem for months without affecting the networking.

  Interestingly under "Access Type:" network and sharing Center, I get "No Internet access", but when I open a browser and go to google via an IP (173.194.37.136) that changes quickly to 'Internet' although I still cannot ping google.

  Other the only thing I found which looks not right is that ipconfig/registerdns does appear the error: "DNS record failed: the RPC server is unavailable" which seems strange as CPP indicates its execution in services.msc and everything seems to be OK. There are a few pages on the web that mention this error but they seem to everyone apply to servers and it is a dell laptop vanilla Win7HP64 running.

  Things that I have not tried...

  relocation of hardware drivers: I tell myself that if it affects Intel Realtek LAN WiFi AND it may not be the drivers for those

  I'm now ideas.

  Help please!

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  I hope this helps.

• Satellite Pro A120 - sound works but function button and volume button are not

  Hello

  Although the sound on my laptop works well, I can no longer on / turn off or adjust the volume by using the function keys or the sound button/wheel (before the laptop).

  I think it can occur after you uninstall a boot program (controls when everything starts during startup).

  Any ideas how I can get it working again?

  Hello

  Why you n t try to adjust the operating system in the early time before you uninstalled the application?
  I think this might be the best way to get this rerun

  Otherwise, try to reinstall the Toshiba 3.23.1704.U for Win XP controls

  Greetings

• Satellite A100 does not power up - LED orange flashing but nothing else

  My Satellite A100 laptop fell on the couch and now wont power up,

  I get a flashing orange LED but nothing else.
  This only happens with the AC adapter is plugged and not with the battery.

  What can I do to solve this problem and what should I watch?

  Hello

  Try to remove the battery and unplug the AC adapter.
  Wait a while (> 2 hours) and then reconnect the two parts.
  If the laptop still not, will fuel even using a good power adapter and the battery in good condition, the problem could be related to the problem RAM or the motherboard.

  You should also try to delete one (or two modules if you have some spare parts) module of RAM and should try to turn on the laptop.

  Good luck

• Satellite P20 doesn't work anymore - clear CMOS?

  Hi all

  My laptop Satellite P20 no longer works, the system switches, but nothing happens, nothing on the screen, just the fans blowing air.

  I would like to clear CMOS, but I don't know which bridge to shorten on the motherboard.

  I also saw this: [http://support.toshiba-tro.de/kb0/TSB4B009N0006R01.htm | http://support.toshiba-tro.de/kb0/TSB4B009N0006R01.htm]
  I'm afraid that my son has tried to add a password for me not to start the laptop and maybe he aded "©" letter which is especially common in french. He said that he did not do anything... but I don't really trust him when he says that hahahah...

  Thank you for your help

  The document above describes the problem with Equium A60, Satellite A60 and Tecra S1 units and not the Satellite P20.
  So I think we can exclude your laptop BIOS password problem.

  According to your message, the problem looks like a malfunction of the motherboard
  > I would like to clear CMOS
  I put t knows anything about your experience of mobile but it seems you would mix technology PC desk with mobile technology. The layout of the motherboard for the laptop is just different and to be honest I don't think that if a clearing CMOS sensor would solve this problem

  In my opinion you have only one option; the authorized service provider should be contacted to clarify what s bad! If the motherboard is dead then you can solve this problem with the replacement of the Board of Directors and this could be a costly affair

• computer is connected to the airport, but nothing else does

  My time capsule airport is plugged in and the light is green.  My iMac is connected to the network via wifi without problem, but nothing else will connect.  My iPhone and apple TV to see the network to connect to, but when I select keep just try and custom actually connect.

  We just moved and the internet was created just to our new home, but nothing has changed.

  What is the number and model of your modem?

  When you set up the new Internet service, you you connected your iMac directly the modem?  If you did, it's probably the problem.

  What operating system runs the iMac?  If you are not sure, click on the Apple icon in the upper left corner of the screen and click on in respect of this Mac, then poster is back with Version of OS X number that you see there.

• HP 6500 E709n-lights but NOTHING else responds

  I've had my 6500 during a few years now and very happy with it until today.  The printer in the market and then began to go through the features of wireless setup since I had to replace my router.  During the installation process of the wireless printer, the screen on the printer just froze.  No BUTTON does not at all, not even the power button.  I unplugged the printer and plugged it back in and the lights and the printer turns on but nothing else responds, not even the power button.  I tried everything I do not know and can not get the printer to answer anything at all.  Are there any other suggestions out there?

  Thanks in advance!

  Thanks again!  It works!

• My labtop sound works, but when connect the headphones does not work

  My labtop sound works, but when connect the headphones does not work. Note that the headset before 1 HR was working.

  Hello

  ·         Are these USB headset or headphone jack analog standard?

  ·         What version of the operating system is installed on the system?

  If you continue Windows 7 or Windows Vista refer to the procedure in method provided below and check if they help to resolve the issue.

  Method 1:

  Step 1:

  You can check if the headphones are activated as a playback device. To do this, see the following steps:

  (a) the Pearl-click Start and type Sound in the start search box.

  (b) in the Start Menu Options, select change adapter settings .

  (c) then, on the Read tab, right-click and select Show hidden devices and Show disconnected devices if they are available.

  (d) select headphones and select

  Step 2:

  Also try to put headphones of default device and check, follow the steps below.

  (a) go to Start and click on Panel.

  (b) click Sound, and then a new window will open.

  (c) in the new window click on the "Playback" tab and right-click in the window and click on Show disabled devices.

  (d) now check if headphone is listed there and right-click on it and choose activate.

  (e) highlight this helmet and click on "as default'.»»

• my computer says the sound works, but I don't hear anything, what should I do?

  my computer says the sound works but I hear nothing and now I'm trying to raise my volume and it does not work as well... .What do I do?

  Hello

  I suggest you try to run this under fixit and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  It will be useful.

• Satalite Pro > Power lights but nothing else?

  Hi all

  A small question. Received a Satalite Pro. The power turns on but nothing else.
  I tried the HARD drive in my m200 Portege and its XP Pro running. The Satalite Pro has 1 > 512 MB ram stick inside.

  The overall condition is good and I'm tempted to spend a few shillings to try to bring back to life or we are talking about a major surgery.
  My knowledge is fundamental will have to spend to get fixed.

  Would like to receive your ideas / suggestions.

  Thank you
  Neil

  Well, in my opinion you should first check the RAM modules.
  The faulty RAM memory would prevent the laptop to boot.
  The RAM modules are the first parts that need to be checked.

  But if the modules are ok, then part of the material such as the CPU or the motherboard could be defective.
  In this case, the replacement of parts can be expensive

• Canon printer works, but nothing is printing

  Printer works but nothing is printing.  Do not have an indicator that the ink cartridge is empty.  No warning.

  Hello

  · What is the model number of the computer?

  · Were there any changes made on the computer before the show?

  Check is it y of error codes and error message appears in Event Viewer: how to view and manage the event logs in Event Viewer in Windows XP: http://support.microsoft.com/kb/308427

  You can also follow the steps listed in the link below: printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• For Windows XP, desktop background well, but nothing else seems no icons, nothing

  For Windows XpBackground desktop is fine, but nothing else appears, no icons, nothing, a message saying UxTheme.dll. is missing and re - install it might help, but I don't have the disk. I put it to date by a company, and they must have. I don't really know anything computers as well. Write slowly please.

  Thank you

  Tonya

  Sometimes to restart Explorer, you can get out of this situation.  When you arrive at the blank screen, press Ctrl - Alt - Delete if all goes well a window will appear that allows you to choose 'Task Manager '.  Click on the Task Manager and when it starts, click on the "Processes" tab and then select the file-> new task.  When that window comes to the top, enter "Explorer" in the box, and then click 'OK '.  I hope that your screen will then fill.

  HTH,
  JW

• My screen of zuma game reduced to half its normal size, but nothing else is affected

  Original title: screen problems

  My screen of zuma game reduced to half its normal size, but nothing else was hit.

  Hi Jodi661,

  ·         What is the brand and model of the computer?

  Check the status of the display driver in Device Manager:

  a. click on Start

  b. in the Run dialog box type devmgmt.msc

  (c) in the Device Manager window

  d. expand graphic cards

  e. check if an error code is listed.

  Follow the methods below:

  Method 1: Try to change the resolution of the screen and check the results.

   

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

  Method 2: If the method above is not enough, you can see the article in the Microsoft Knowledge Base and check.

   

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

  I hope this helps.