Canon printer works, but nothing is printing

Similar Questions

• nslookup works but nothing else has DNS on standalone PC Win7.

  I can connect to cables and wireless networks, the computer gets an IP address and the gateway and DNS from DHCP server very well and I can connect to things via ip but nothing can resolve DNS nslookup, which seems to work perfectly except. Network and sharing Center shows as 'connected' and 'no internet access. I tried many things, and now, I'm stumped. The problems began when a router has failed recently, several other machines come online when the defective router was replaced, but it never did.

  Some of the things I've tried...

  uninstalled anything that could possibly mess with networking: McAfee, Hamachi, Hello etc.
  has run the McAfee removal tool
  starts in safe mode
  tried multiple profiles
  turned off the windows firewall
  Unchecked
  the DNS 8.8.8.8 manually for each card value
  Set an IP address for google.com manually in the hosts file: ping will not always solve this
  disabled the dnscache service: makes no difference then re-not active it
  netsh int ip reset resetlog.txt: not a no effect and resetlog.txt is never created
  netsh winsock reset
  sfc/scannow: not found corruption
  unchecked ipv6 for all network adapters in the system
  restarted, like, a million times

  CPP, DHCP, DNS Client that all seem to be running.

  Hardware tests very well, no DNS problems with interface either when running a linux boot disk, so there must be software.

  There is nothing in the logs has not already was a problem for several months or is not directly attributable to the lack of connectivity, this problem of network is new from 3 or 4 days. Significant error entries only are, annoyingly, for system restore and VSS which means that the system did not the restore points for several months, and even more annoyingly, fails to restore those what already with a "catastrophic error 0x8000ffff". Embarrassing if it isn't, there was obviously a problem for months without affecting the networking.

  Interestingly under "Access Type:" network and sharing Center, I get "No Internet access", but when I open a browser and go to google via an IP (173.194.37.136) that changes quickly to 'Internet' although I still cannot ping google.

  Other the only thing I found which looks not right is that ipconfig/registerdns does appear the error: "DNS record failed: the RPC server is unavailable" which seems strange as CPP indicates its execution in services.msc and everything seems to be OK. There are a few pages on the web that mention this error but they seem to everyone apply to servers and it is a dell laptop vanilla Win7HP64 running.

  Things that I have not tried...

  relocation of hardware drivers: I tell myself that if it affects Intel Realtek LAN WiFi AND it may not be the drivers for those

  I'm now ideas.

  Help please!

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  I hope this helps.

• Music CD works but nothing so digital photo CD has been implemented

  Do not understand why I can back up files to a CD. Can listen to music CDs and download ITunes but when I insert CD on which I put my digital pictures literally nothing happens, no recognition, and when I try to access the CD drive through my computer it seems empty. Still the same CD work correctly on my son's laptop computer. Is it me

  Answers will have to be simple enough to be understood

  Hello

  I guess that you burned digital photos on CD.
  You log out of engraving? What burning program did you use?

  I advise to use the Nero and the different types of CD.
  Perhaps the reader cannot accept this CD because it doesn't support it.
  You should know that not all the CDs and DVDs are compatible with each drive.

• 13.0.1 day saw upward tabs: when I opened a new tab nothing I enter in the address field work. Google and bookmarks work, but nothing to manually enter

  If I open a new tab, I can't enter any address at any site. Well, that I can enter, just at the moment where I hit return the address of the typewritten page disappears and returns to "go to a Web site. Nothing happens. I can use the search box (google) or a bookmark to open a new tab. This tab resulting will be then to accept the entrance and go to the address as I type. The new tab will not do anything.

  Try to open a new window (file > new window) to see if it works.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

  This can also be a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

  You can also try to repair the database of places with this extension:

  • https://addons.Mozilla.org/firefox/addon/places-maintenance/

• Satellite P20 - system sounds work but nothing else

  I have a P20-552 (PSP26E-025E9-S4) which is a little more than two years. This morning he suddenly decided to not play some sounds. System sounds play as usual as do all soundtracks from my video editing software (Adobe Premiere Elements).

  However, when you try to open a file AVI, WAV or MP3 using WMP, I get the following message:

  Windows Media Player cannot play the file because there is a problem with the audio device. It might not be a sound device installed on your computer, it can be used by another program, or it might not work properly

  iTunes gives you a similar error message.

  RealPlayer produces more sound during radio playback. It gives all the possible indications of play station involved, but no actual sound is produced. It was working fine last night.

  The only thing I remember past which was for the first time in four days, when I turned the machine last night the Windows automatic update did NOT install something. For the last four days, he apparently had five updates to perform each time and I, of course, always left the machine in order to perform updates and turns off.

  In Control Panel, I just went in sounds and Audio devices and on the Volume tab, he says no. Audio Device. Under the tab Audio everything is grey I ve a feeling that this is not normal

  In Device Manager there is no indication of any conflicts etc.

  Can someone help me, please?

  I had a similar situation after voice chat through MSN messenger. Remove the sound card in Device Manager, reboot the device and check if it works again. If so, is probably a responsible application of this.

  Which one? Find only.

• Windows Update still works but nothing happens

  When I initially installed W7 Pro he performed the first updates normally.  However for the last several days updating keeps showing it is running, and hovering above the icon will display a message that has downloaded at X %, but it never updates.  Also if I try to open Windows Update, it never opens.

  Any help is appreciated.

  Hi RodgerTN,

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  (a) since when are you facing this problem?

  I suggest you to reset the Windows Update components. To reset the update Windows components automatically follow the steps mentioned below.

  Method 1:

  1. click on the button to resolve this in the article mentioned below.

  2. click run in the file download dialog box and follow the steps described in the fix it Wizard.

  For more information, see the article mentioned below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  You can run (Checksur.exe) system update readiness tool

  Download and run (Checksur.exe) system update readiness tool. After downloading this tool, it runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

  For more information about how to download and run the system update readiness tool, click on the number below to view the article in the Microsoft Knowledge Base: 947821 Description of the system update tool for Windows Vista and Windows Server 2008: http://support.microsoft.com/kb/947821

  In article 947821, scroll down to the "Microsoft Download Center" section, and then click the link to download the update for your operating system preparation tool.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• color canon lbp 2410 printer will not install in 64 bit win7. I tried everything suggested, but nothing works. It will install in 32-bit win7?

  color canon lbp 2410 printer will not install in 64 bit win7. I tried everything suggested, but nothing works. It will install in 32-bit win7?

  It's an old printer and there was only the 32-bit drivers for Windows 98 to Vista. Canon are unlikely to write 64-bit drivers now.

• 5210 kodak printer, when I print the document runs through the printer, but nothing prints, suggestions. worked fine until today after a move

  everything looks ok, but when I print the paper passes through the printer but nothing prints, suggestions. worked fine until today after a move

  Check with Kodak support or website to see if there's a test or a diagnostic process that you can run to identify the problem with the printer.  It is not likely to be a problem of Windows at this point.

• I have windows vista, my printer is working paper is fine, but nothing is printing on paper there is ink.

  just installed my hp deskjet D4260 printer as I said it is running, the document is fine, but nothing good print on paper.

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  I suggest you to follow the links and check out them.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

• After upgrade to Windows 7 - printer is installed, but nothing prints

  I see some posts with people who say that their printer is installed, but when they try and printing is queued for the print spooler and then disappears, or they say they can print a test page for the HP software but nothing prints.

  Most of these people seem to have migrated from another version of Windows to Windows 7, and they have configurations and different printers.

  Through testing, we found that this fix works.

  How to fix

  1. Unplug the printer if it is connected via a usb cable.
  2. Click the icon and select all programs.
  3. Select the HP folder, and then select the printer and select Uninstall
  4. Once the uninstall is complete, select devices and printers
  5. Click on another printer or Microsoft XPS Document Writer
  6. Click on the printer server properties in the top menu
  7. Choose the drivers to the installed printer drivers , select the printer that has been uninstalled in step 3.
  8. Click Remove and when we asked him to choose to remove the driver and driver package and click ok.
  9. Install the Windows 7 software for the printer.

  I would like to say a big thank you to all who have posted on this subject with the details of their facilities, etc.  This information has helped me make this fix.

  Thank you

  This thread has been locked, for more information on HPPIW, please refer to the following support document:

  http://support.HP.com/us-en/document/c02681060

  HP printer Installation Wizard is an application of HP support that helped to download printer software. This support request is no longer supported by HP. This software was last updated was September 22, 2015.

  To download and install the latest version of the software for your HP printer, please visit 123.hp.comor HP support Web site, HP Support Assistant (in English).

• EASYWEB print concerns: it is said is working, but still does not print

  EasyWeb print says it is trying to print email on printer, for example received, BUT nothing happens. I recharged my canon print drive, but no difference

  Hi, Louise.

  If you have installed "Cumulative Update for Internet Explorer for Windows XP (KB912812)", which was not included in Windows Update for Windows XP SP2, a script error may occur when you print or preview pages using Canon Easy-WebPrint.

  http://www.canoneasywebprint.com/en/

  Control Panel > printers & faxes folder

  Right-click on the printer icon and select open

  Do you see pending print jobs?

  Click file > cancel all Documents

  Close the print queue

  Start > type services.msc

  Scroll down to print spooler

  Right-click on print spooler

  Select Properties

  Click on stop

  Wait for Windows to stop the print spooler

  Close Services window

  Start > right click on computer

  Select manage

  Select Device Manager

  Click on the + sign next to the Ieee... Compatible printers

  Right-click on the driver and select uninstall

  Click on the + sign next to imaging devices

  Right-click on the driver and select uninstall

  Click on the + sign next to printers

  Right-click on the driver and select uninstall

  Click on the + sign next to Bus USB controllers

  Right-click on the driver and select uninstall

  Close the Device Manager

  Shutdown computer

  Turn the printer off

  Unplug the printer from the computer unit

  Unplug the printer

  Leave the printer turned off and unplugged for about 5 minutes

  Plug the printer back in taken unit and pc

  Turn on the printer

  Restart the computer

  Windows will reinstall the drivers on reboot

  Once the loading of Windows, back to services and restart the print spooler

  Try printing again

• HP4500. Wireless: Wireless HP4500 - prints Test Page but nothing else

  I just bought my first iMac.  I also have a HP (Windows) laptop connected wireless to a HP Officejet 4500 Wireless printer/fax combination for work.  For the new iMac, I loaded the software from the HP drive.  The test page printed beautifully, but nothing prints.  No e-mail, not a word processor file, nothing.  I have tried the uninstall / reboot / reinstall way nothing helps.  I saw the instructions to configure a static IP address, but I'm not sure what could do to my current computer-printer link.  Any suggestions?

  Unfortunately, I am not sure I can reproduce the steps but I finally got my printer to work.  I had to install a new driver from HP and Hello "Multifunction" from Apple.  After several reboots, the printer works now.  Sheesh!

• HP Officejet 6500 Wireless: Print - stream paper and sounds right but nothing on paper.

  Recently the summaries printed and everything was fine.   Replace the ink cartridges and now when we try to print something, the flow of paper into the printer and sounds like its printing but nothing does not appear on paper when it comes out.  When printing e-mail, it will display the title (to, from, subject, etc.), but nothing in the body of the e-mail draws.  I aligned the print heads and cleaned the print heads, but still nothing. Any ideas on what could be the problem?

  After I replied that the attempts did not work, I tried cleaning and aligning the printheads again. This time, it worked like a charm. Thank you very much for your help, you have my sincere gratitude without end.

• HP Officejet J5780 all-in-one will print test and diagnostics pages but nothing else

  I tried to install my Officejet J5780 on a Windows 7 machine and install CD does not work for Windows 7.  Downloaded the software and drivers from the HP site and since then the printer prints a test page or a page of diagnosis etc but nothing of MS Office or Notepad.

  Any ideas?

  Hello

  I see that you have a problem with the printer. I would say that runs the print and scan the doctor.

• Wireless printing has stopped working, but ONLY on my G72... not on other computers on my network mobile home.

  Hello... I have a laptop of HP G72 under windows7 64 bit and a deskjet4500 of HP printer all in one with a home network of the G of Belkin Wireless. Wireless printing works very well for months and it STILL works from another laptop. I am able to print from the G72 with a USB cord but when I try wireless I have a printer of saying not connected error message. I tried to walk through the troubleshooting tips, but nothing seems to work. Anyone can help? Thank you!

  OK, lets run this utility from the troubled PC: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/