Music watch 65.4 GB files folder but no files in the folder

Similar Questions

• Watch one. TGA files in the Explorer - the way legitimate?

  There are many plugins for explorer, which allows you to view the .tga files in Explorer. However, the results are often quite buggy.

  I am looking for a way to preview images in Explorer .tga, preferably an official plugin from Microsoft (I have not found a good).
  Is there such official plugin, or can you recommend a 3rd party that has proven to work properly?

  Matt,

  Thank you for visiting the Microsoft answers community. There is currently no Microsoft plug-in. In research, I found a site of the 3 part that had decent reviews, however, Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.

  Also read the comments, it seems to work for 32 bit only.

  I hope this helps.

  Plug for TGA

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have try your transfer music from my laptop to my htc, but it cannot detect phon

  I have try your transfer music from my laptop to my htc, but it cannot detect the phone

  Hello

  Thanks for posting the request in the Microsoft community!

  Before troubleshooting, provide us with information.

  1. what happens when you try to transfer music from laptop to phone?
  2. you receive an error message?
  3 for the limit with the music?
  4. do the phone not detected in Device Manager?
  5. you try to copy files of music from Windows Explorer?

  This error code may occur if the computer is not getting properly detect on the phone. Also, if the type of music files you want to transfer to the computer is not considered if supported by the phone, you can try to convert the file to answer the phone and check.

  You can also try to restart the computer and choose the mode of data transfer from your mobile phone.

  Method 1:
  Run the troubleshooter of material and check.
  Reference: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2:
  You can update the latest version of the phone software or drivers on the manufacturer's Web site and check.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Check out the link:
  http://www.HTC.com/in/support/

  Just reply with the results. I'd be happy to help you further.

• I need to import music files into Movie Maker, but when I open the folder for the song the folder is empty

  When I tried to import songs in movie maker I opened the folder and it was empty, but I could play the song in itunes... I looked at the help section in movie maker and found no .m4a is listed as being supported. is there a way to find the song, change it and import it into movie maker?

  When I tried to import songs in movie maker I opened the folder and it was empty, but I could play the song in itunes... I looked at the help section in movie maker and found no .m4a is listed as being supported. is there a way to find the song, change it and import it into movie maker?

  Yes, google for a FREE audio converter. Change your itunes songs or songs that are not supported by the manufacturer of film in MP3, WMA or WAV... mp3 and wma are more preferable. WAV format is too large file size, not practical.
  Then import the song to movie maker. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• DVD player - watch my DVD-R disc data but all files disappeared and I get the message ' Drag files in folder to add To Disc ' at the opening of the DVD

  Yesterday, I used my laptop Toshiba Satellite update of data on an excel spreadsheet on my dvd - r disc, which is half full of files such as spreadsheets, assorted images and backup files.  Today, when I insert the disk into the pc it still shows 2.43 free 4.37 GB has been the norm, which means that it contains these files.  But when I open the drive there is nothing else that a message "drag files in this folder to add To Disc".  I don't know what happened.  I had just copied various basis files that I mentioned on this drive months ago without any problems.  I've updated excel spreadsheet monthly with no problem.  I checked the other drives I have and they are very good.  Any help would be appreciated.

  Hi Mark,

  Thank you for your update on the issue.

  Glad to know you've got the problem solved. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows. We will be more than happy to help you again.

  Thanks again for sharing with us!

• My Media Player will not play my ripped cd just says can't find the files, but I can play the song if I find in my music via windows Explorer folder

  It just happened the only Album that the fact that I have other albums by the same artist, who do not have this problem when I go to click on the songs to play it says it can't find the file, it also doesn't let me remove them from the library? need help ASAP

  Hello
  This problem may occur if Windows Media Player is corrupted.
  Try the following and see if it helps.
  Method 1:
  
  Run the troubleshooter in Windows Media Player and check if that helps.

  Open the troubleshooter in the Windows Media Player library: http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Media-Player-Library-troubleshooter

  Open the troubleshooting Windows Media Player settings Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Media-Player-Settings-troubleshooter

  
  
  Method 2:
  
  Try to clear the database of Windows Media Player. To do this, follow these steps:

  a. Click Start, click Run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  b. Select all files in the folder and then click on Delete on the file menu.
  Note: You don't have to remove the folders that are in this folder.
  c. restart Windows Media Player.
  Note Windows Media Player automatically rebuilds the database.
  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:
  a. exit Windows Media Player.
  b. If you run Windows 7, click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.
  c. Select the Media Player folder, and then click on Delete on the file menu.
  d. restart Windows Media Player.
  Note: Windows Media Player automatically rebuilds the database

  Method 3:
  Try to uninstall and reinstall Windows Media player from Windows features and check if it helps.

  Enable or disable Windows features: http://windows.microsoft.com/en-US/windows7/Turn-Windows-features-on-or-off

  Hope the information is useful.

• Save the file to the shared folder in Release Build works, but not in Export version

  We are ready to present our application to App World. However, we noticied when testing the 'export release' that build our file saving function of does not work (the file is not be saved - but the folder we created). The file records fine when running in debug or release mode, but not to export the final file.

  Is - this all simply because we are not supposed to try to run the bar directly exported version file and it should work once on App World? Has anyone experience this problem?

  We are trying to back up the folder "shared/music/AppName" If that helps.

  We have corrected it. We were writing somehow to the wrong address in the "shared". For some reason, it still worked when you use version debug/directly from the IDE, but does not when exported. That's all now works well.

• Files hit the entrance watched folders folder

  Hello

  I created a folder Watched. When I intentionally went from files in the watched folders of entry folder, the files don't move not at the stadium or any other directories.

  I checked the permissions thing and even restarted the jboss twice.

  Not in order to make the control record work steps.

  1a given all permissions recursively to control folder
  2. not deployed and deployed back demand for control folder
  3 removed the app and made a smooth deployment of the application fodler watched
  4 restart Jboss

  But nothing helped me.

  Can someone let me know what to do to get rid of this problem

  Kind regards

  Carter

  Hello

  We knew that IDPScheduler will listen to the record of ENTRY watched folders. But here on our machine of LiveCycle watched folders are hit. So I thought that there could be a problem with the IDPSchedulerService/SchedulerService.

  So I followed steps below:

  1. connect to workbench

  2. from the "components" tab, stopped and started the SchedulerService component

  3. connected to /AdminUI

  4. go to home > Services > Applications and Services > service management

  5. arrested and began IDPSchedulerService

  6 cancelled all Watched folders on this server

  7 restart the jboss

  8 deployed watched folders

  I have found no problems after this and treat the files successfully.

  Kind regards

  Carter J

• What is the extension of the files in the profile folder - file the emails, but not the message .msf file?

  I need to recover a lost Inbox (lost due to a failure). The file to the Inbox in the profile folder is somehow cleaned as if the record has been compacted and some new emails have been added. The size of the file is now a few hundred KB when there should be a few hundred MB. I have run a recovery of files on this disc, but now have thousands of files with names like Raw122354 and don't know what to look for, because the Inbox file has no extension. I can remove those with file extensions I don't know, but that still leaves too many to go through.

  I guess I should also ask if this is a waste of time, if I have a chance to recover the file?

  Messaging files are text files, so yes, you can open them with a text editor. I wouldn't try to open a file of messages Gigabyte with Notepad however.
  There is no need to rename the file with a .txt extension, it can be opened with any text editor without worrying.

• What is the difference (if any) between iPhoto and iPhoto library? I managed to delete my pictures in freeing up space, but have a backup available. Do I have to download these two files in the pictures folder is one duplicate of the other?

  What is the difference (if any) between iPhoto and iPhoto library? I managed to delete my pictures in freeing up space, but have a backup available. I need to restore these two files in the folder images or one is one duplicate of the other?

  I use a MacBook Air 2013 model with a backup on a WD MyBook Duo disc for storage wireless as the Apple Time Machine.

  The Photos and the iPhoto library are totally separated - neither one is connected to the other somehow--you want to restore the library you need

  LN

• Where the photos are normally stored on a Mac computer? In the folder images in the Finder on my Mac, I see a file called "Library.photoslibrary Photos" i.e. 28.52 GB but I also have about 160 other image files in the same folder. But in pictures,.

  Where the photos are normally stored on a Mac computer? In the folder images in the Finder on my Mac, I have a file named "Library.photoslibrary Photos" i.e. 28.52 gb and another folder called 'iPhoto Library.migratedphotolibrary' i.e. 4.95 GB, but then I have also on the 160 other photo and video files in the same folder. But in my Photos app, it says that I have 6 260 'elements '.

  The pictures that you have imported into the photo library are, by default, stored inside the package (not file) "Library.photoslibrary Photos" in your pictures folder. The 'iPhoto Library.migratedphotolibrary' package would contain photos that have been stored in your library, iPhoto at the time of the migration.

  The other files in the pictures folder are that: other files. Also, they can be in libraries if you imported and has not deleted the copies lying around in the images.

• How can I make use of TC partitions and make sure that the file analysis is on the right partition?  I do not see the partitions that I have done in the Finder, but I can drag and drop the files in the folder 'Data' unique under Finder/Shared/TC.

  MacBook Air, OSX 10.10.3, 128 GB; 2 TB Time Capsule ME177LL/A.

  Final objective: use Time Capsule as a Time Machine for my MacBook Air and as a storage solution for large files that I don't want permanently on my MacBook Air.

  So far, I've implemented the TC and set up Time Machine on the TC.  I was able to create 2 partitions on the TC using disk utility then that TM was a backup and the disk was recognizable in disk utility.

  Under Finder/shared, I see the TimeCapsule 'airport', and when I click on it it is a file called "Data".  I was expecting to see my two partitions here.  Under 'Features' is a ' Zissou31 MacBook Air (3)"sparsebundle file and I can also create folders here and drag and drop files on the TC here.  I can see the partitions in disk utility, but how do I see/use the partitions I created in the Finder?

  I fear that this may not be set up correctly and I'm either losing on an entire partition I created or these files dragged/dropped may be at risk of overwriting of TimeMachine.  How can I make sure that the file analysis is on the appropriate partition?

  I disabled TimeMachine and go back to see if I could 'point' to one of the partitions, but the "Data" folder is the only thing that TimeMachine seen.  How do I point time Machine for one of the partitions?

  Thank you!

  In addition, in disk utility, I can see one of the partitions TC is related to the time Machine, indicated by the icon Time Machine green bottom left, but two partitions seem to fall under "Zissou31 of the MacBook Air (3) .sparsebundle.

• The user may not delete the file from the folder on the server but can rename file

  Hi all

  Please suggest how to give permission to some folder so that the user may not delete all the files in the folder but can create, update, or RENAME the folder.
  I gave permission where user is not able to delete the file, but the user is also able to rename the file or folder in this specific folder.

  Thanks in advance.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• In XP PRO SP3 WMP11, will add all my files in the library. I added the folder, but it adds only 116 records 2000

  In XP PRO SP3 WMP11, will add all my files in the library. I added the folder, but it adds only 116 records 2000

  In XP PRO SP3 WMP11, will add all my files in the library. I added the folder, but it adds only 116 records 2000

  You cannot view, add, or delete items in the library of Windows Media Player 11

• CANNOT write to files in the shared folder of XP on a PC running windows 7 - but good vice versa

  I have a laptop under Windows 7 (SP1) and a desktop running XP (SP3).  I have connected both via a wireless network. While I can see and access shared files/folders from one computer to the other computer, I can only read/write files in the shared folder on the portable computer that is running Windows 7.

  If I try and change a file in the shared folder from the PC under XP on my laptop, I get the message "this file is set to read-only. Try again with a different name "."  I know that the file is NOT checked for read-only. When I change the name of the file I get the error message "\\Desktop\SharedDocs\filename.doc you are not allowed to save in this location. Contact the administrator for approval.  You want to save in the folder my documents instead? "If I save the file to another location on the laptop under Win7 it save then OK.  I can not just save a modified version of the file in the same shared folder from desktop running XP.
  It seems that it must be something to do with permissions and access to the parameters of the desktop running XP but I can not find these. Fairly easy to find in Windows 7.
  Finally, I don't have a login/password set for the connection to the computer to Office XP.  I don't have a user name and password for the laptop Win7 but you have turned off password protected sharing.
  Anyone have a solution to this?
  Thank you

  OK - the problem is now resolved.

  I noticed that the read-only for the shared folder has been checked. When I unchecked it and also checked the box "allow network users to change my files" in the shared folder properties/sharing, I was able to modify and save files in the shared folder on my laptop.
  It's a little weird because I thought I had done this the other day where the results have been less successful.  Strange.
  Thanks for your help.