Must my webworks games implement the Scoreloop for approval or just to get into the construction of BB program?

Similar Questions

• Fact the construction project ' C:\Program Files (x 86) \VMware\vCAC\Server\Model "(InstallRepoModel target - has FAILED.

  
  People

  I implement a distributed vCAC installation. Load Balancing is a netscaler vpx and I use Comodo signed certs. I'm pulling my hair out here.

  Anyone has an idea of what could be the cause of root for the build fails at this point every time?

  -----------------------------------------

  News: 2014-05-07 09-04 45 284 PM: to System.Data.Services.Client.BatchStream.ReadBuffer)

  News: 2014-05-07 09-04 45 284 PM: to System.Data.Services.Client.BatchStream.ReadDelimiter (Byte [] buffer, Int32 count, Int32 offset)

  News: 2014-05-07 09-04 45 284 PM: to System.Data.Services.Client.BatchStream.Seek (Int64, SeekOrigin origin offset)

  News: 2014-05-07 09-04 45 284 PM: to System.Data.Services.Client.BatchStream.StreamWithLength.Dispose (Boolean disposing)

  News: 2014-05-07 09-04 45 284 PM: to the System.IO.Stream.Close)

  News: 2014-05-07 09-04 45 284 PM: to System.Data.Services.Client.BatchStream.MoveNext)

  News: 2014-05-07 09-04 45 284 PM: to d__1e System.Data.Services.Client.DataServiceContext.SaveResult. < HandleBatchResponse >. MoveNext()

  News: 2014-05-07 09-04 45 300 PM: to System.Data.Services.Client.DataServiceContext.SaveResult.HandleBatchResponse)

  News: 2014-05-07 09-04 45 300 PM: to System.Data.Services.Client.DataServiceContext.SaveResult.EndRequest)

  News: 2014-05-07 09-04 45 300 PM: to System.Data.Services.Client.DataServiceContext.SaveChanges (SaveChangesOptions, options)

  News: 2014-05-07 09-04 45 300 PM: to DynamicOps.Repository.RepositoryServiceContext.SaveChanges (SaveChangesOptions, options)

  News: 2014-05-07 09-04 45 300 PM: to DynamicOps.Tools.Common.SecurityHelpers.InstallSecurityConfig (config securityConfig, String httpRootRepository)

  News: 2014-05-07 09-04 45 300 PM: at DynamicOps.Tools.Common.ModelHelpers.InstallModel (String assemblyFileName, String securityFileName, String server, catalog of, string userName, String password, String httpRootRepository)

  News: 2014-05-07 09-04 45 300 PM: to DynamicOps.Tools.Repoutil.Commands.ModelInstallCommand.Execute (CommandLineParser Analyzer)

  News: 2014-05-07 09-04 45 300 PM: Warning: return nonzero code. The command failed.

  News: 2014-05-07 09 04 45 315 PM: C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DeployRepository.xml (594,5): error MSB3073: the command "" C:\Program Files (x 86) \VMware\vCAC\Server\Model "model-Install - f" C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.ManagementModel.dll "s 'cnndckppcp5018.nndc.kp.org' d 'IaasDB" - c "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\ManagementModelSecurityConfig.xml"-v "came out with code 1.

  News: 2014-05-07 09-04 45 315 PM: construction project is "C:\Program Files (x 86) \VMware\vCAC\Server\Model" (InstallRepoModel target - has FAILED.

  News: 2014-05-07 09-04 45 315 PM: Build FAILED.

  News: 2014-05-07 09-04 45 315 PM: "C:\Program Files (x 86) \VMware\vCAC\Server\Model" (target InstallRepoModel) (1)->

  News: 2014-05-07 09-04 45 315 PM->:(InstallRepoModel target)

  News: 2014-05-07 09 04 45 315 PM: C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DeployRepository.xml (594,5): error MSB3073: the command "" C:\Program Files (x 86) \VMware\vCAC\Server\Model "model-Install - f" C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.ManagementModel.dll "s 'cnndckppcp5018.nndc.kp.org' d 'IaasDB" - c "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\ManagementModelSecurityConfig.xml"-v "came out with code 1.

  News: 2014-05-07 09-04 45 315 PM: 0 warning (s)

  News: 2014-05-07 09-04 45 PM 315: 1 error (s)

  News: 2014-05-07 09-04 45 315 PM: time 00:05:38.13

  --------------------------------------------------

  Thank you originaly.

  This looks more like a problem of connectivity to the server that you install in the repository.

  It could be the configuration of the network, firewall or something else, but you do not reach the repository

  Can you open

  C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\RepoUtil.exe.config and locate the repositoryAddress.

  Add "/ repository/Data/managementmodelentities.svc" and try to go through.

• Uninstalled game still displayed in the menu "Uninstall/Change Program." Directory of the game deleted as well. How do I completely remove it from the system?

  I uninstalled a game, and for good measure, I also deleted the game program files directory. Nothing is left... However, I find one more persistent "title game" in the menu "Uninstall/Change Program." How do I remove it completely?

  -TACANDEL

  I would try using the Windows Installer Cleanup utility, which can be downloaded from Microsoft: http://support.microsoft.com/kb/290301. To install the tool, download and run as administrator.   Then, you must run the tool by clicking Start, typing Windows Installer Clean Up in the search field and clicking on the enter key.   Select the item you want to delete in the menu program uninstall/change, and then click Remove.    Click OK in the confirmation window.  It should work pretty quickly. Click on exit to close the tool.

  To learn more about this utility, read this article: http://en.wikipedia.org/wiki/Windows_Installer_CleanUp_Utility.

  Barbara

• Is it possible to implement the special keys to a program name

  Canned commands

  Is it possible to implement the special keys to program a name & address, etc.?

  In addition, if there is a low-cost program that does the same thing please let me know.

  Thank you

  Damon

  Settings - general - keyboard - replacing text

  It works for your needs?

• How to add games in the section add/remove?

  Having just changed since an other Netbook (total nightmare) for the (amazing) Toshiba manufacture, my daughter (10) I was wondering how is the number of games in the area Add / Remove programs is much less than in section of add/remove the other factory?
  Are there other sources of games for this machine and if so, how can I add the to add a deletion?

  Thank you very much
  Welcoming

  Add Remove Programs seems to be a cut from the version of the package manager, which is normally executed by user root/master.
  Go to the menu Preferences/main / administration and click the synaptic package manager. This will add to the menu under admin selection. Close the windows.

  Go to the package synaptic/administration manager. This will open add it remove programs in their ENTIRETY.
  Willl you find more games listed. The disadvantage of this addition in the menu list i gives it FULL access to the OS and games programs. Remove some programs from here could also remove the dependencies to other programs.

  Maybe you can configure yourself as user and add or remove root for her. She created without admin priveliges.

  Hope this helps

  MalColli

• Implement the Std::Vector &lt; &lt; Point2i &gt; &gt; Std::Vector in dll wrapper for LabVIEW

  Hi, I'm writing a wrapper dll that using OpenCV function. I had been sucessfully implement Std::Vector by referring to "An array of clusters to a dll C sending".

  And now, I want to implement the Std::Vector<>> who is a lot like table 2D but each line items may be different.

  In LabVIEW, I attribute a range of cluster of the dashboard cluster of 2 I32 elements, structure which is shown below:

  

  I think it has the same functionality as Std::Vector<>> in C++.

  So I plug this data on the "Call library function node" structure and generate C code that indicated below:

  /* Call Library source file */
  
  #include "extcode.h"
  
  /* lv_prolog.h and lv_epilog.h set up the correct alignment for LabVIEW data. */
  #include "lv_prolog.h"
  
  /* Typedefs */
  
  typedef struct {
      int32_t elt1;
      int32_t elt2;
      } TD4;
  
  typedef struct {
      int32_t dimSize;
      TD4 elt[1];
      } TD3;
  typedef TD3 **TD3Hdl;
  
  typedef struct {
      TD3Hdl elt1;
      } TD2;
  
  typedef struct {
      int32_t dimSize;
      TD2 elt[1];
      } TD1;
  typedef TD1 **TD1Hdl;
  
  #include "lv_epilog.h"
  
  void funcName(TD1Hdl arg1);
  
  void funcName(TD1Hdl arg1)
  {
  
      /* Insert code here */
  
  }
  

  Then, I write this code show below in dll wrapper:

  void funcName(TD1Hdl Blobs)
  {
      vector < vector > blobs;
  
      // Distribute contents of blobs to Blobs from LabVIEW
      MgErr err = mgNoErr;
      size_t arraySizeInBytes = Offset(TD1, elt1) + sizeof(TD2)*blobs.size();     // Determine row size
      err = DSSetHSzClr(Blobs, arraySizeInBytes);
  
      if (err != mgNoErr)
          return;
  
      (*Blobs)->dimSize = blobs.size();
  
      for (size_t i = 0; i < blobs.size(); i++) {
          arraySizeInBytes = Offset(TD3, elt) + sizeof(TD4)*blobs[i].size();  // Determine col size of each row
          err = DSSetHSzClr((*Blobs)->elt[i].elt1, arraySizeInBytes);
  
          if (err != mgNoErr)
              return;
  
                  /*......................*/
          }
  }
  

  When I call LabVIEW dll, the program get interuption(i.e shutdown) on line where I want to determine the size of each row.

  Could someone give me some suggestions on this subject or promote another application of this requirement?
  Thank you very much.

  MgErr funcName(TD1Hdl Blobs)
  {
      vector < vector > blobs;
  
          Labeling(image_binary, blobs);         // the prototype of this function is: Labeling(Mat &binary, Vector> &blobs)
  
      // Distribute contents of blobs to Blobs from LabVIEW
      MgErr err = mgNoErr;
      size_t arraySizeInBytes = Offset(TD1, elt) + sizeof(TD2)*blobs.size();      // Determine row size
  
          if (contours == NULL)        {                Blobs = (TD1Hdl)DSNewHClr(arraySizeInBytes);                if (Blobs == NULL)                         err = mFullErr;        }        else                err = DSSetHSzClr(Blobs, arraySizeInBytes);
          if (err != mgNoErr)                return err;    for (size_t i = 0; err == mgNoEerr && i < blobs.size(); i++) {
          arraySizeInBytes = Offset(TD3, elt) + sizeof(TD4)*blobs[i].size();  // Determine col size of each row
  
                  if ((*Blobs)->elt[i].elt1 == NULL)                {                        (*Blobs)->elt[i].elt1 = (TD3Hdl)DSNewHClr(arraySizeInBytes);                        if ((*Blobs)->elt[i].elt1 == NULL)                                    err = mFullErr;                }                else               err = DSSetHSzClr((*Blobs)->elt[i].elt1, arraySizeInBytes);
                  if (err == mgNoErr)                {                        (*((*Blobs)->elt[i].elt1))->dimSize = blobs[i].size();
  
                          /*......................*/
  
                  }
          }
          (*Blobs)->dimSize = i;        return err;}
  

  Personaally I've usually done like this. Already, the tar of DSSetHSzClr() indicates if there was something wrong and that the handle cannot really become NULL to call this function.

  To be entirely correct and safety integrated, you must do more than that. But as long as you assume that the incoming picture is always smaller that the outgoing Board will be (usually it be 0 items when you enter this function, but if you reuse sort table in the diagram, by storing it in a registry change for example, this may not be true more) this will be enough.

• can I submit a webworks App (blackberry 10) for approval, but only tested in the emulator in the vm player?

  can I submit a webworks App (blackberry 10) for approval, but only tested in emulator in the drive of the VM, since I don't have any blackberry Device?

  where to find the differences between the web of BB and phonegap works,... preparation & submission?

  Or otherwise if I have a html5/css3/js/jQmobile approx... How loan submit? Android App Phonegap already submitted in the game of Google... but as I see there are differences between the BB web works and phonegap.

  We understand that not all developers have access to a physical device, which is the Simulator comes in. The Simulator you usually gives a good idea of how your application will run on a physical device, and you can absolutely submit this application for review of the BlackBerry World. If problems arise, the BlackBerry World team will let you know of those that need to be corrected before the application can be approved for sale.

  This is true for WebWorks, Android, etc. The BlackBerry World team reviews your application and provide feedback if there are all the important issues which seem to be broken. If you have tested the application elsewhere however, generally you should not be from.

• Implementation of Physx for DirectX game

  I was wondering if there was a way to implement Physx bookstores for my game using DirectX. It would be useful to better physical and graphic.

  You do not implement PhysX libraries in games. They use it, or not.

  While the games use cpu physics based for some time (Half Life 2, 'ragdoll' physical and)
  is an example) PhysX is really just an advanced physical management system, but there is not a lot of games that make good use of PhysX - yet.
  Apparently, Borderlands 2 had a lot of attention with its PhysX. Batman AA and AC are
  Another example of games that uses PhysX.
  The difference between the normal physical and PhysX up to this point has been quite low.

  I'm not up on top of the latest about ATI as I am using Nvidia for a long time, but the PhysX
  treatment is related to the Nvidia Cuda technology.
  Some say that you can use your cpu (if it is powerful enough) to PhysX, but one may wonder
  If they are indeed PhysX or normal physical based cpu.

  NVIDIA bought the rights for PhysX of Agea and they had exclusive rights to it.
  Yet once again, I'm not on later, but people have been able to use a 'hybrid' system (installing an Nvidia card in a machine with an ATI/AMD card) with driver hacks earlier, but the driver Nvidia changes which stopped.  .

  PhysX is more effective when you use two Nvidia cards with a dedicated PhysX card.
  I've not bothered with this Setup (my motherboard that the machine was also only one PCI-e slot, so I couldn't experiment with it anyway), but a single Nvidia card will always be PhysX.
  Batman AC PhysX is still very effective with my GTX560ti.

  You should be able to find more information on the creation of a dedicated card for PhysX if you do a search.

• I was charged for my coffee game update, which I wasn't aware of. I do not accept to pay about $ 8 for only an update, this game in the first place was free. I want to ask for a return and I will delete the game

  I was charged for my coffee game update, which I wasn't aware of. I do not accept to pay about $ 8 for only an update, this game in the first place was free. I want to ask for a return and I will delete the game

  Apple or App developers read this forum. If you want a refund, contact the developer to the email address. It is to them that they will refund your or not.

• I get a JavaScript Application error: "setTimeout" called on an object that does not implement the interface Window for Firefox.

  I get a pop up box with the message: Application JavaScript error: "setTimeout" called on an object that does not implement the interface Window for Firefox.

  But it seems to appear when I go to Amazon.com. Then he opens with this message and the OK option? But as fast as I can click OK, another box appears. After all a half dozen, she disappears - until what I move to another part of Amazon! I uninstalled - reinstalled and then - Firefox and BA. I do not understand this!

  (And of course, there is always the possibility that it is not only attacking me on Amazon... There may be a lot of other sites that also trigger, and I just haven't been there yet.)

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Games works more slowly for the 3rd time.

  I suspect that my graphics card is corrupted/confused.  A few weeks ago, I was able to play all my games on graph high resolution of 1440 x 900, but with shadows.  About 2 weeks ago I had to give up all my games at the lowest effects and the resolution to 1024 x 768.  Now my games won't work for about 15 minutes and that the framerate will drop severely.  I ran Furmark and my average FPS was 8... I cleaned the inside of the computer, defragmented, it, ran CCleaner, updated my card system restore, I tried to graphics.  This is the 3rd time I've had this problem.  Is my just messed up graphics card or somehting?  Here are my specs.  If I left something out let me know.  I have this PC for about 3 years.

  Microsoft Windows Vista Home Premium version 2006
  Intel Core 2 Quad Q9300
  nVIDIA GeForce 9500 GS (D9M-25)
  3 GB memory

  Hello

  If you want to improve performance, then you will need to replace the power supply and buying a video card.  Look at what this site is for a video card for BBC 2.

  Look at the NVIDIA GTX 460 1 GB as a possible choice for a video card.  The CX500 Corsair has enough power for the NVIDIA GTX 460 1 GB.

  You might do some research on what the gamers who use 2 BBC are recommend for a video card.

• Media Player error: IWindows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.

  I copied a dvd on a USB from a friend, I can see from memory stick, but when I tried to copy it to my computer and read it, it says that iwindows Media Player can't read the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. Can someone help me please?

  Thank you

  I copied a dvd on a USB from a friend, I can see from memory stick, but when I tried to copy it to my computer and read it, it says that iwindows Media Player can't read the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. Can someone help me please?

  Thank you

  =========================================================
  Best bet would be to download and install the free software
  VLC media player... it should play the video without the
  you need to change the region code.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.6 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.6 - win64.exe)

• Get an error "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "

  * Original title: wrong Region

  Windows Media Player will not play CD - advise

  "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "

  Note I am eager to play a CD and it is recognizing a DVD?

  can anyone help

  Hello

  1. what version of Windows is installed on the computer?

  2. what version of Windows Media Player is installed on the computer?

  3. what region is your currently defined DVD player on?

  4. are you able to play other DVDs?

   

  Please follow the provided steps and update us with the results.

  Note: All the steps apply to Windows 7

  Method 1: Try to change the region of the DVD player and check the result. To do this, try the following steps:

  a. Click Start, click computer.
  b. right click on the DVD drive, and then click Properties.
  c. click on the Hardware tab, click the properties button and modify the DVD of the region.

   

  Method 2: Uninstall the DVD player and check.

  a. Click Start, type devmgmt.msc and press to enter.

  b. develop DVD players, right click on the sub element and click on uninstall.

  c. restart the computer and check the result.

  Once you restart the computer, the DVD driver will be loaded automatically.

  d. try to play the DVD and check the result.

   

  You can run the troubleshooting Windows Media Player DVD Troubleshooter and check that it helps.

  Open the Windows Media Player DVD Troubleshoot utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

  Let us know if it helps!

• Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.

  Windows media player dvd region

  After you apply an update to the media player, I now get the error message

  "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. »

  natuarally ive checked the area defined for the reader and even tried to re applying the region

  I then noticed its doing the same thing with dvd stored on my media server, and while he would not even play MPEG or avi stored on my hard drive

  I went to my comments to logon (standard user) media player works fine

  so I'm back and tried to reinstall the mediaplayer to my admin login, it wouldn't let me not delete it, ran Media Player microsoft penalty shooter, he said everything ok

  so I changed the guest account on an admin account to try to remove it from there, but as soon as I did this mediaplayer stopped working in the feedback connection that leads me to believe its a sort of level access virus, that has permeated the media player or a defect in this connection required to complete admin update media player

  Hello

  ·         Have you tried the steps in method 1 of troubleshooting?

  ·         Do you have any code or an error message when you try to uninstall Windows Media player?

  Method 1:

  You can try to connect the different DVD player and check if it works.

  Method 2:

  You can re - register wmp.dll file and check if it helps.

  (a) log on as an administrator.
  (b) click Start, type cmd in the Search text box, right-clickcmd.exe, click run as administrator, and then click on continue.
  (c) at the command prompt, type regsvr32 wmp.dll press ENTER.

  Method 3:

  You can also try to create a new administrator user account and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

• BlackBerry WebWorks PIM Contact Plugin customization for retriving the list of all the Contacts in the phonebook

  Hi all

  I use the plugin contact Blackberry 10 webwroks sdk 1.0.0.Howvere pim, it gives me almost all pim access contact api.

  However, I would like to add a few additional options of pim api. Exactly, I want to customize seen pim plugin contact. And to expose methods added to the WebWorks project.

  Now, will I have to make the plugin necessary to start contact (by writing native code, and then wrap the same in construction of extension).

  Or is he in any case, I can get the code for the pim.contact plugin that came with blackberry SDK and can make the necessary changes in the native code and buiding new folder so and, following the steps for the construction of the extension.

  Here is the reason why I am demanding to make it personalized:

  I can't find any method that can retrieve list of the basicarry contact a table containing data for all contacts. The only thing I am able to do using the method find explicitly by setting the limit.

  Please suggest something and also correct me if I am wrong somewhere.

  It may be easier to start with your own custom extensions, but if you want to take a look at the SDK WebWorks and included extensions, that would be the best starting point.

  https://github.com/BlackBerry/BB10-WebWorks-framework/tree/master/ext/PIM.contacts