My 8.5 table look-up does not work at 8.6.

Similar Questions

• background in the table cell alignment does not work

  So I have one one line, a 2 column table.  In the second/last column, I have an image which must be low and stalled on the right.  However, no matter what I do, I can't image to sit at the bottom of the cell.

  If I add columns and move the image to one of the Interior columns, it aligns bottom, but if I then delete the column to the right (so that the image is now, once again, in the last column) once again the image is not aligned.

  I tried to give the image a negative margin of down, but that does not work.

  Here is the code:

  < td = class "last" style = "" vertical-align: bottom; "> < a href ="#TOPofPage1"> < img"

  "SRC ="... / RESOURCES/i_SPECIAL_art/RETURNtoTopIcon.png "alt =" "class ="TOPofPage""

  style = "" margin-bottom:-12px; "/ > < / a > < table >"

  Here's what it looks like:

  

  If the orange circle with the white triangle be resting at the bottom of his column... Why is it not?

  When I copy the code of your cell and just change the image of a flat triangle I, the alignment of bottom and negative margin works correctly.

  Check other style in the tr and labels of table and also all the styles applied to a party any of the table - maybe something it's setting of the alignment of the cell.

  If nothing seems obvious, perhaps copy the entire table in a fresh test project to see what's happening and add little by little in your styles to see if you can reproduce.

• Formula 10g to Upload data in an oracle table flat file does not work.

  My files data flat txt looks like this_
  
  _ "recgis.txt" _
  
  
  4300,69, A22110043, TC, 1/17/2009,801100107010100,90,210,2211,0,0,0,0,0,0,0,0,1/17/2009 13:13:46, 131346, 20082009, 1, 1, 0
  4300,69, A22110044, TC, 1/17/2009,801100107010100,60,140,2211,0,0,0,0,0,0,0,0,1/17/2009 13:15:22, 20082009 131522, 0, 1, 0
  4300,69, A22110045, TC, 1/17/2009,801100107010100,210,490,2211,0,0,0,0,0,0,0,0,1/17/2009 13:17:56, 131756, 20082009, 3, 2, 0
  4300,69, A22110046, TC, 1/17/2009,801100107010100,270,630,2211,0,0,0,0,0,0,0,0,1/17/2009 13:19:58, 131958 20082009, 9, 0, 0
  4300,05, A22250013, TC, 1/17/2009,801100107010100,210,490,2225,0,0,0,0,0,0,0,0,1/17/2009 13:21:42, 132142, 20082009, 3, 0, 1
  4300,69, A22110047, TC, 1/17/2009,801100107010100,390,910,2211,0,0,0,0,0,0,0,0,1/17/2009 13:23:31, 132331, 20082009, 1, 6, 0
  
  
  _ my control file
  
  _ "Loader.CTL" _
  
  load data
  INFILE ' c:\data\REC_GIS. TXT'
  in the REC_GISTEMP table
  fields ended by ',' optionally surrounded "" "
  (TREA_CODE, CHAL_NO, CHAL_DATE, V_NO AND OP_CODE DATE, DEPNAME, ADDRESS, H_CODE, INS_AMT, SAV_AMT,
  SRC_MJCD, MAN_30, MAN_60, MAN_120, MAN_10, MAN_20, MAN_40, MAN_80, MAN_15, ENT_DATE, ENT_TIME, FIN_YEAR, MAN_100, MAN_200, MAN_400)
  
  
  
  * I have created a form and wrote a bellow pl/sql trigger 'WHEN-CLICK' on the download button *.
  
  DECLARE
  ldrcmd varchar (200);
  BEGIN
  filename: =: BLOCK3. FILEPATH; text box that contains the file path
  
  ldrcmd: = 'sqlldr control = E:\NIC\UPSEGID\loader.ctl INS/password@orcl';
  Host (ldrcmd);
  END;
  
  * but its does not work please someone help me what I do wrong... *.
  
  Published by: 839880 on February 25, 2011 10:26
  
  Published by: 839880 on February 25, 2011 10:28

  ldrcmd: = 'sqlldr control = log REC_GIS.ctl = upldlog.log INS/password@orcl';

  As stated above, your order is most likely not going to work because of lack of full paths.

• Table of contents does not work - it does not show the unique points

  Hey, I'm lost - I work as a designer of book and it's on the 2000th book I did with indesign - and suddenly - this is a update new version problem or I'm suddenly stupid? -It seems no longer works...

  problem: I have two formats for the titles, both are used correctly in the entire document. I add in the table of contents, give them their own formats and so on... and when I genereate the thing, nothing. no points, no page numbers only, only the head... and there is also

  No any hidden text, it simply does not create this shit

  Excuse my language, I tried for two days now...

  I add a screenshot, maybe I'm completely blind? can someone help me?

  

  Thank you! I solved it just... it was missing a link in the pages of text (sorry, I don't know the English terms for this) and after I plugged - VOILA! Two days of lost, but a new experience...

• analyze the work of the table but dbms_stats does not work

  Hi all

  I have a very simple question, although analyze command became obsolete for many years, when I use analyze, command, I get the result of empty_blocks (user_tables) but when I use the dbms_stat package I get nothing.

  SQL > select * from v version $;

  BANNER
  ----------------------------------------------------------------
  Oracle Database 10 g Express Edition Release 10.2.0.1.0 - product
  PL/SQL Release 10.2.0.1.0 - Production
  CORE 10.2.0.1.0 Production
  AMT for 32-bit Windows: Version 10.2.0.1.0 - Production
  NLSRTL Version 10.2.0.1.0 - Production

  SQL > create table deneme2 in select * from object;

  table created

  
  SQL > exec dbms_stats.gather_table_stats (USER, 'DENEME2');

  PL/SQL procedure successfully completed.

  SQL > select blocks, empty_blocks from user_tables where table_name = 'DENEME2;

  BLOCKS EMPTY_BLOCKS
  ---------- ------------
  13            0

  SQL > analyze table deneme2 calculating statistics;

  Parsed table.

  SQL > select blocks, empty_blocks from user_tables where table_name = 'DENEME2;

  BLOCKS EMPTY_BLOCKS
  ---------- ------------
  13            3

  Which is wrong with dbms_stats? I missed somewhere? Does anyone have any idea who why dbms_stat can't work?

  Thanks in advance.

  Hello

  That's what said ORACLE. See the link below:

  http://docs.Oracle.com/CD/B28359_01/server.111/b28310/general002.htm

  «Oracle is recommended to use the most versatile DBMS_STATS package for gathering statistics for the optimizer, but you must use the ANALYZE instruction to collect statistics that are not related to the optimizer, such as empty blocks, spatial average and so on.»

• Table of contents does not work

  InDesign cs6, windows XP

  I have a book created with 16 documents (so far). I tried to create a Table of contents (TOC); He's not well.

  In the document that I put to the table of contents (in the book), the OCD side is open after the chapters of books have been digitized. I selected the paragraph Styles to include in the table of contents of the list of styles, discovered in the documents. I selected OK. I got the text icon. I placed the TOC and... nothing. (Finally, I got the title of "Content"). I expected a little more.

  What Miss me?

  http://help.Adobe.com/en_US/InDesign/CS/using/WS49FB9AF6-38AB-42fb-B056-8DACE18DDF63a.html

  I think you need to follow the steps with a lot of attention.

• Table of contents does not work correctly. Help!

  Hello!

  When my projects are published, in the table of contents it shows only the first 5 slides.

  Help?

  The same phenomenon occurs if you start a new empty project and add 10 slides, configuration all that they appear in the table of contents?  Or it only happens with the upgraded projects?

  Are these issues in all types of sensitive and non-responsive projects?

• JavaScript works with an alert, but does not work without it. Why?

  This happened to me before, but I was able to solve my problem. Now I'm not.

  Let me explain: I have a javascript function which I call when I double click on a line on a table:

  [code]

  	function CallServ (evt) {}
  	source var = evt.getSource ();

  	AdfCustomEvent.queue (source, "call",
  	{
  	},

  (false);

  	auxDblClick.call (this, source);
  	}

  	function auxDblClick (CBC) {}
  	split var = src.toString () .split ('=');
  	var idButton = split [1];
  	var split2 = idButton.split(':');
  	okButton = split2 var [0].concat(':');
  	for (var i = 1; i & lt; (split2.length - 1); i ++) {}
  	okButton = okButton.concat (split2 [i], ' :');)
  	}
  	okButton = okButton.concat ('dc_cb1');
  	var comp = AdfPage.PAGE.findComponent (okButton);
  	Alert (COMP);
  	AdfActionEvent.queue (comp, comp.getPartialSubmit ());
  	} [/ code]

  As you can see, my alert line is commented. If it is not commented, the "auxDblClick" feature works very well: it will print the model on the alert, and then it will perform the action of the dc_cb1 button. However, when I commented the alert function, it stops working.

  I have PartialTrigger set to "true" on my dc_cb1 button and the clientComponent is set to 'true '. I've also set to true ClientComponent on the table, but it does not work.

  So, why the function working with alert, but does not work with the alert off the coast? What Miss me?

  
  P.S: jdev version 11.1.2.4.0

  I found the solution:

  Before the "AdfActionEvent.queue (comp, comp.getPartialSubmit ());" line, I used the update function. Like this:

  	var t = document.getElementById (okButton);
  	t.Focus ();

  Now everything works fine

• Partitioned global index on partitioned table range, but the index partition does not work

  Hello:

  I was creating an index partitioned on table partitioned and partitioned index does not work.

  create table table_range)

  CUST_FIRST_NAME VARCHAR2 (20).

  CUST_GENDER CHAR (1),

  CUST_CITY VARCHAR2 (30),

  COUNTRY_ISO_CODE CHAR (2),

  COUNTRY_NAME VARCHAR2 (40),

  COUNTRY_SUBREGION VARCHAR2 (30),

  PROD_ID NUMBER NOT NULL,

  CUST_ID NUMBER NOT NULL,

  TIME_ID DATE NOT NULL,

  CHANNEL_ID NUMBER NOT NULL,

  PROMO_ID NUMBER OF NON-NULL,

  QUANTITY_SOLD NUMBER (10.2) NOT NULL,

  AMOUNT_SOLD NUMBER (10.2) NOT NULL

  )

  partition by (range (time_id)

  lower partition p1 values (u01 tablespace to_date('2001/01/01','YYYY/MM/DD')),

  lower partition (to_date('2002/01/01','YYYY/MM/DD')) tablespace u02 p2 values

  );

  create index ind_table_range on table2 (prod_id)

  () global partition range (prod_id)

  values less than (100) partition p1,

  lower partition p2 values (maxvalue)

  );

  SQL > select TABLE_NAME, SUBPARTITION_COUNT, HIGH_VALUE, nom_partition NUM_ROWS of user_tab_partitions;

  TABLE_NAME NOM_PARTITION SUBPARTITION_COUNT HIGH_VALUE NUM_ROWS

  ----------- ---------------- ------------------ -------------------------------------------------------------------------------- ----------

  TABLE_RANGE P2 0 TO_DATE (' 2002-01-01 00:00:00 ',' SYYYY-MM-DD HH24:MI:SS ',' NLS_CALENDAR = GREGORIA 259418)

  TABLE_RANGE P1 0 TO_DATE (' 2001-01-01 00:00:00 ',' SYYYY-MM-DD HH24:MI:SS ',' NLS_CALENDAR = GREGORIA 659425)

  SQL > select INDEX_NAME, NUM_ROWS nom_partition, HIGH_VALUE user_ind_partitions;

  INDEX_NAME NOM_PARTITION HIGH_VALUE NUM_ROWS

  ------------------------------ ------------------------------ -------------------------- ----------

  P1 IND_TABLE_RANGE 100 479520

  IND_TABLE_RANGE P2 MAXVALUE 439323

  SQL > EXECUTE DBMS_STATS. GATHER_TABLE_STATS (USER, 'TABLE_RANGE');

  SQL > EXECUTE DBMS_STATS. GATHER_TABLE_STATS (USER, 'TABLE_RANGE', GRANULARITY = > 'PARTITION');

  SQL > EXECUTE DBMS_STATS. GATHER_INDEX_STATS (USER, 'IND_TABLE_RANGE');

  SQL > EXECUTE DBMS_STATS. GATHER_INDEX_STATS (USER, 'IND_TABLE_RANGE', GRANULARITY = > 'PARTITION');

  SQL > set autotrace traceonly

  SQL > alter shared_pool RAS system;

  SQL > changes the system built-in buffer_cache;

  SQL > select * from table_range

  where prod_id = 127;

  ---------------------------------------------------------------------------------------------------

  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time | Pstart. Pstop |

  ---------------------------------------------------------------------------------------------------

  |   0 | SELECT STATEMENT |             | 16469 |  1334K |  3579 (1) | 00:00:43 |       |       |

  |   1.  RANGE OF PARTITION ALL THE |             | 16469 |  1334K |  3579 (1) | 00:00:43 |     1.     2.

  |*  2 |   TABLE ACCESS FULL | TABLE_RANGE | 16469 |  1334K |  3579 (1) | 00:00:43 |     1.     2.

  ---------------------------------------------------------------------------------------------------

  Information of predicates (identified by the operation identity card):

  ---------------------------------------------------

  2 - filter ("PROD_ID" = 127)

  Statistics

  ----------------------------------------------------------

  320 recursive calls

  2 db block Gets

  13352 consistent gets

  11820 physical reads

  0 redo size

  855198 bytes sent via SQL * Net to client

  12135 bytes received via SQL * Net from client

  1067 SQL * Net back and forth to and from the client

  61 sorts (memory)

  0 sorts (disk)

  15984 rows processed

  Once the sentence you say ' does not ' and then you go to paste plans that seem to show that it "works".

  What gives?

  In fact, if you look at the plans - think Oracle you have 16 k rows in the table and he'll be back k 12 rows for your select statement. In this case, Oracle is picking up the right plan - full scan 16 ranks of k is a lot less work to digitize the index lines k 12 followed by the research of rank k 12 rowid.

• ORA-06512: at "SYS." DBMS_XMLGEN", (ORA-00942: table or view does not exist)

  Hey guys, it's Xev.

  I decide to use SQL and XML and it works in a scenario, but in another scenario, is not.

  Here's the Code, I'm passing to two variables, first of all, I spend in the table table_name, and then I spend in the schema.

  If I connected it with "user" and that it seeks it's own pattern, he found the results, as for example, but if I try to run this code while not

  connected to the same user I'm looking for more, I get this error.

  ORA-19202: an error has occurred in the processing of XML

  ORA-00942: table or view does not exist

  ORA-06512: at "SYS." DBMS_XMLGEN", line 288

  ORA-06512: at line 1

  19202 00000 - "an error has occurred in the treatment of XML %s.

  * Cause: An error occurred during the processing of the XML function

  * Action: Check the given error message and resolve the problem appropriate

  /*-------------------------------------------------------------------------------

  This code works only you are connected to the user you are looking on.

  But if you're looking for a different user tables, it is kicking up and gives the above XML error...

  */

  SET SERVEROUTPUT ON

  exec DBMS_OUTPUT. ENABLE (1000000);

  Search_string VAR VARCHAR2 (28)

  EXEC: search_string: = ' ^ [0-9]{3}-[0-9]{2}-[0-9]{4}$']

  COLUMN "Keyword" FORMAT A28

  COLUMN 'Table' FORMAT A9

  COLUMN ' column value / "FORMAT A50

  SELECT DISTINCT SUBSTR (: search_string, 1: 28) "keyword."

  SUBSTR (table_name, 1, 14) "table."

  SUBSTR (t.column_value.getstringval (), 1, 50) ' / value of the column.

  OF dba_tab_cols.

  -where owner = ('& SCHEMA_NAME')

  TABLE

  (XMLSEQUENCE

  (DBMS_XMLGEN. GETXMLTYPE

  ("SELECT" | column_name |)

  'FROM ' | table_name |

  "WHERE REGEXP_LIKE.

  (' | column_name |) ','''

  || : search_string. ''')'

  () .extract (' LINES/rowset / * ""))) t

  -WHERE table_name IN ("FIND_TEST")

  WHERE table_name = upper ('& table_name')

  AND the OWNER = upper ('& SCHEMA_NAME')

  ORDER BY "Table".

  /

  Can someone please explain how works (DBMS_XMLGEN) and why it is throwing this error?

  Thank you

  Xev.

  It has nothing to do with DBMS_XMLGEN. GETXMLTYPE. It simply means the user running your SQL has no select privileges on the table & SCHEMA_NAME. & TABLE_NAME.

  SY.

• 30002 error/ORA-00942 table or view does not exist

  Hello

  We are running on a Windows 2008 R2 machine RoboServer 9 with Tomcat 7. The database, that we strive to connect is an Oracle 11 g on a Linux x86_64 host server. I connect using the Oracle through ODBC drivers. When I click "test connection" of the ODBC Administrator or application configuration, I get the message 'successful connection '. That is the problem.

  When you try to run our reports, especially "Frequently consulted CSH" or "Frequently viewed Topics", we get the following error.

  

  Check the localhost.log in Tomcat, we get this:

  Journal of the org.apache.catalina.core.ApplicationContext 10:37:41 28 March 2013

  SEVERE: java.sql.SQLException: [Oracle] [ODBC] [Ora] ORA-00942: table or view does not exist

  java.sql.SQLException: [Oracle] [ODBC] [Ora] ORA-00942: table or view does not exist

  at sun.jdbc.odbc.JdbcOdbc.createSQLException (unknown Source)

  at sun.jdbc.odbc.JdbcOdbc.standardError (unknown Source)

  at sun.jdbc.odbc.JdbcOdbc.SQLExecDirect (unknown Source)

  at sun.jdbc.odbc.JdbcOdbcStatement.execute (unknown Source)

  at sun.jdbc.odbc.JdbcOdbcStatement.executeQuery (unknown Source)

  at adobe.robohelp.server.FlexReports.AreasReqHelpReport.SetData(AreasReqHelpReport.java:84)

  at adobe.robohelp.server.FlexReports.Report.ProcessReport(Report.java:295)

  at adobe.robohelp.server.ReportManager.doCommand(ReportManager.java:395)

  at adobe.robohelp.server.RoboHelpServer.doGet(RoboHelpServer.java:144)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:617)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 290)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)

  at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)

  at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)

  at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:470)

  at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)

  at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)

  at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)

  at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)

  at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:859)

  at org.apache.coyote.http11.Http11Protocol$ Http11ConnectionHandler.process (Http11Protocol.ja goes: 602)

  to org.apache.tomcat.util.net.JIoEndpoint$ Worker.run (JIoEndpoint.java:489)

  at java.lang.Thread.run (unknown Source)

  Looks like all tables exist in the database - this is what we have:

  TEST:

  ROBOTST4 > select object_name from dba_objects where type_objet = 'TABLE' and owner = 'MCVICKER;

  OBJECT_NAME

  --------------------------------------------------------------------------------

  TACTIONTYPE

  TERRORTYPE

  THELPPROJECT

  THELPSPACEERROR

  TUSER

  TPROBLEM

  TSOLUTIONACTION

  THELPTOPICS

  TUSERPREFS

  TSETTING

  TSESSION

  TACCESSTYPE

  TROBOGROUPS

  TROBOUSER

  TROBOUSERGROUPS

  TLDAPUSERGROUPS

  TGROUPPERMISSIONS

  TLDAPGROUPS

  TCOMMENTS

  TDELETEDCOMMENTS

  TUSERTOPICRATING

  TAVGTOPICRATING

  22 selected lines.

  
  

  I think that we have set. Here's the deal.

  For some reason, the database put in place all the tables but not views initially. My DBA views manually created using definitions of the included database. In Access, if you go in queries, then right-click on the table, select "design mode".  Right-click on the design mode, select "SQL Mode" and you can view the SQL statements used to define the view.  You should see something like this:

  

  She has slightly modified the - here's what she created:

  Created to MCVICKER's point of view in ROBOTST.

  create or replace view mcvicker. VSolutionAction

  SELECT

  TSolutionAction.sa_SolutionActionID,

  TSolutionAction.sa_Time,

  TSolutionAction.se_SessionID,

  TSolutionAction.pb_ProblemID,

  TSolutionAction.sq_SequenceID,

  TSolutionAction.hp_HelpProjectID,

  TSolutionAction.at_ActionTypeID,

  TSolutionAction.sa_SortData,

  LTRIM(sa_DisplayName,255) AS sa_GroupDisplayName,

  -Left $([sa_DisplayName],255) AS sa_GroupDisplayName,

  TSolutionAction.sa_DisplayName,

  TSolutionAction.sa_NumericData,

  LTRIM(sa_StringData,255) AS sa_GroupStringData,

  -Left $([sa_StringData],255) AS sa_GroupStringData,

  TSolutionAction.sa_StringData,

  TSolutionAction.sa_ExtraData,

  TSolutionAction.sa_ProblemSolved,

  TSolutionAction.ha_AreaName

  OF TSolutionAction;

  create or replace view mcvicker. VHelpProject

  as

  SELECT

  THelpProject.hp_HelpProjectID,

  LTRIM(hp_Name,255) AS hp_GroupName,

  -Left $([hp_Name],255) AS hp_GroupName,

  THelpProject.hp_Name,

  THelpProject.ha_AreaName

  OF mcvicker. THelpProject;

  create or replace view mcvicker. VProblem

  as

  SELECT

  TProblem.pb_ProblemID,

  TProblem.se_SessionID,

  TProblem.pb_InitiationTime,

  LTRIM(pb_ReferringURL,255) AS pb_GroupReferringURL,

  -Left $([pb_ReferringURL],255) AS pb_GroupReferringURL,

  TProblem.pb_ReferringURL,

  LTRIM(pb_ReferringParams,255) AS pb_GroupReferringParams,

  -Left $([pb_ReferringParams],255) AS pb_GroupReferringParams,

  TProblem.pb_ReferringParams,

  LTRIM(pb_RequestedTopic,255) AS pb_GroupRequestedTopic,

  -Left $([pb_RequestedTopic],255) AS pb_GroupRequestedTopic,

  TProblem.pb_RequestedTopic,

  TProblem.pb_ExternTransactionID,

  TProblem.pb_ExternUserID,

  TProblem.pb_AppData,

  TProblem.pb_ProblemSolved,

  TProblem.ha_AreaName

  OF mcvicker. TProblem;

  I hope this helps someone.

  My questions are pending: what the app actually creates tables and views? This work to restart tomcat? According to a timetable? It seems that when I set up the connection and leave the things the next day they work. Is there some sort of scheduled task that the database maintenance? Can we make it a little more transparent in future versions?

  Thank you.

• Error (20.22): PL/SQL: ORA-00942: table or view does not exist

  I get currently getting an error when I try and insert into a table of a different pattern of my stored procedure:
  Error (20.22): PL/SQL: ORA-00942: table or view does not exist
  
  I am explicitly calling the table with the name of the schema that is infront
  
  INSERT INTO SAPSR3. ZTREC_NAME_TYPE
  (
  MASTER_ID,
  NAME_TYPE,
  FAMILY_NAME,
  FIRST NAME,
  MIDDLE_NAME,
  TITLE
  )
  VALUES
  (
  In_MasterID,
  In_NameType,
  In_FamilyName,
  In_FirstName,
  In_MiddleName,
  In_Title
  );
  
  Only, I get this error when I try to compile my stored procedure. If I try this insert not within a stored procedure (for example, an empty script) it works perfectly.
  
  Can someone tell me what Im doing wrong?
  
  Thank you.

  Hello

  Looks like you (the owner of the procedure) have privileges on that table only through a role.
  Roles do not count in the stored procedures created with AUTHID OWNER (which is the default).

  Or the other
  (1) user SAPSR3 have the privileges needed directly at you (or public), or
  (2) change the procedure so that it runs with the privileges of the caller, adding AUTHID CURRENT_USER after the list of arguments, but before the keyword IS (AS os) like this:

  CREATE OR REPLACE PROCEDURE     foo
  (     x     IN     NUMBER
  )
  AUTHID CURRENT_USER
  IS ...
  

• my favorite look and pop does not work. What can I do

  my favorite look and pop does not work. What can I do

  Did you you turn on 3D Touch in settings > General > accessibility > Touch 3D > WE? What you are trying to use peek and pop in? You press hard enough? Last question, do you have an iPhone 6s or 6s more?

• Get all the different values in a table - 'or array elements' does not work with I32

  Hello

  I just found out that "array elements or" does not work with a table 1 d of integer values. I didn't expect that.

  I did a semi quick forum search and did not find a pointer to an effective solution. Can someone give me a hint?

  Do not back my initial intention is to list all the values that appear in an array of integers.

  I thought that if I converted the figures for powers of 2 and or I had solved the problem at hand - only to discover that the elements of array does not.

  If someone could propose a different approach, I'd be happy too.

  I should mention that the execution time is a factor here - I need a fast code, but any suggestions are welcome because they could help me get started.

  Best regards Florian

  Hi Florian.

  try this:

  

  "Function, it seems, the table of GOLD ' is polymorphic (as written in the context-sensitive help), but does not support arrays of I32. At least the error message means just that...

• My internal Microphone table (IDT High Definition Audio Codec) does not work

  Hello

  My internal Microphone table (IDT High Definition Audio Codec) does not work.

  I can't make calls from Skype.

  I've tried everything, but I'm still not able to solve the problem.

  Could you please advice me what to do?

  Could you please provide me with a link with the drivers, I might need to reinstall.

  My computer is Windos 8.1, HP, Intel i - 7 CPU, 64-bit operating system.

  I would really appreciate your quick response to solve this problem.

  Thank you very much

  Antonio

  Hey,.

  Try installing this driver: driver Audio IDT high definition (HD)

  If this fails, try to use the HP Recovery Manager to roll back the driver installed in the factory.

  After the two tests. I would like to know if the option worked.