My Apple iPhone 5 touchscreen doesn't work not when the call comes. This problem is only in locked mode and mode unlocked when the call come it works normally. The problem is only locked Iphone and a just coming guard time. give soltn

Similar Questions

• Touchscreen doesn't work is not for the Satellite U920t - 10 p

  Please read this completely before you answer with your copied and pasted answers.

  My touch screen lets you stop work, but was still attached with a reboot of the machine.
  Now it doesn't work at all and * I've tried everything posted elsewhere in this forum *.

  I tried to change the settings for battery power, try to update the drivers (not exactly who is right though!).

  Please can anyone help because it is a new machine and it's very frustrating.

  Serial number: 7D054633H
  Model: Toshiba Satellite U920t - PSUL1E-01900JEN 10 p

  Thanks in advance.

  > Please read this completely before you answer with your copied and pasted answers.
  IMHO, I n t think that someone here in the forum doesn t read the messages before playback
  I hope that this part of your post is just the result of frustration due to the malfunction of the notebook...

  Back to your question:
  > I tried everything already posted elsewhere in this forum.
  and what does this mean? What have you tried exactly?
  Have you given zero and plant control panel?

  If not try and in the case where this help not the laptop's hardware could be affected which requires new checks of material by an authorized

• HP Pavilion: Touchscreen doesn't work is not in the browser

  My touch screen stopped working specifically in Chrome.  It seems to work everywhere else, including IE.  It's probably a frame in Chrome or something on the computer settings I managed to accidentally change?  Thank you!

  Hi there @jexylou,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the chrome browser works only not with the touch screen. I'll be happy to help you.

  Open chrome

  Put this in the address bar: chrome://flags/#touch-events

  Change the setting "enable Touch events" "Automatic" to "Enable"

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• I can't download to work - it does not copy the mp3 files to my location (as defined in tools/options) - it gives me a new window with a player - no dwnlo

  I am running windows xp sp2 and I put my site to dowload under (Tools/options), but when I select an MP3 file to download, firefox does NOT copy the file to my location of choice on my HD - instead, it opens a new window with a 'player' of fortune and starts to load the player with the MP3 file. The problem is that I have no idea where on my system, firefox has copied this file, so, I can't leave and come back later and read this MP3 file using winamp. I need to hear right then or lose - if I close this new window (with this puny little ' player'), then I lose the download, there where to put firefox on my PC (I have no idea where it is). It's all under firefox 25.0

  I also use FIrefox 12.0 on an older windows 2000 machine and that works perfectly - I can download any MP3 file, I want to, and downloads of firefox 12.0 (on win2k, sp4) to my location (on my HD), and it gives me the download window so I can watch its progress and have some control over break and resume , and, when it's done, the download window offers me the option 'open containing folder' so I can make sure that where I wanted. In other words, Firefox 12.0 on WIn2k, sp4 works better than firefox on winxp sp2 25.0! What gives? I went through and set up my options for XP just like I did with Win2k and everything looks good, but firefox 25.0 don't know just my chosen and always default place to give me fortune player and I am not able to actually copy the mp3 files on my hard drive - it's firerox almost unusable 25.0 since downloading mp3 files is a big part of my use firexfox - please help. I am not able to upgrade windows at this time, and since firefox 12.0 still works fine on win2k, I do not understand what has happened to firefox?

  Hello littleberry, you can click on the link that leads to an mp3 file or right click on the drive in firefox and choose to download the file like that...

• CSV export doesn't is not updated the file when it is run through Task Scheduler

  Hello

  A long time have not posted in the VMWare forum... I have a script which generates the host UpTime and export the result to CSV file. It then sends the CSV file as an attachment to our helpdesk system. When I run the script manually through PowerCLI./Get-HostUpTime.ps1 it works fine and it sends the file updated, however, when the script runs through the Windows Task Scheduler, it works very well but is not updated the CSV file and it always sends the former.

  $username = "administrator."

  $password = "password"

  $cred = New-Object System.Management.Automation.PSCredential - ArgumentList @($username, (ConvertTo-SecureString-String $password-AsPlainText-Force))

  SE connect-VIServer-Server vCenter01-Credential $cred

  Notice-EEG - ViewType "HostSystem" - name of the property, summary | `

  where {}

  {$_ .name - like "*"} | »

  Select Name, @{N = "Uptime"; E = {(get-date) - $_.} Summary.Runtime.BootTime}

  } | sort name | Export-csv C:\Scripts\HostsUpTime.csv

  Disconnect-VIServer-confirm: $false

  Send-MailMessage-to [email protected] -To [email protected] -topic "vSphere host UpTime" SmtpServer - accessories SMTPHUB001-C:\Scripts\HostsUpTime.csv

  Any help?

  Thank you

  I propose now to take the next step and include a PowerCLI cmdlet.

  Something like that

  Notice-EEG - ViewType "HostSystem" - name of the property. Select name. Export-Csv C:\Scripts\HostsUpTime.csv

  I just noticed, you don't seem to have a

  Add-pssnapin VMware.VimAutomation.Core

  in your script. Have you who left on purpose?

  If the snap-in is not loaded, you will not be able to use the PowerCLI cmdlets.

• It can't open word document because an importer of appropriate chart is not found. I had this problem and the technician "selected" Word as an opener, but I don't know where to find them on my computer. __

  Cannot open word document because a

  "appropriate graphics importer is not found."

  I had this problem and the technician "selected" Word as an opener, but I don't know where to find them on my computer. Can you direct me while I have when I want the word docuents to open they will be?

  Right click on the saved file.
  Select: Open with on the shortcut menu.
  Click: Choose [default] program
  Letter: Microsoft Word
  Check: Always use the selected program to open this type of file.
  Click OK.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• iPhone 6 more touchscreen doesn't work anymore, any suggestions?

  I had used my phone all morning while shopping. When I got home, I tried switch between applications, but the touch screen has failed. I did a hard reset and still the screen is unresponsive to the touch and now I can't unlock my phone because it requires the password to unlock.

  Anyone have any suggestions for a temporary fix? First Genius Bar appointment is 10 hours now...

  Have you tried to connect in recovery and restore mode?

  If you are unable to update or restore your iOS device

• BB10: Touchscreen doesn't work is not in the Middle

  Hi people,

  

  In my application, the touchscreen does not work in the middle (see figure). What I mean is that it does not have any key event. So if I try to press a button which is in the Middle, it not to press. It has the same problem in all of my app (about 14) screens.

  And the problem is not the device itself, because the touchscreen works perfectly in other applications (such as the browser). I even tried my app in another device with the same results.

  Any idea guys?

  I ve been struggling with this for a while now.

  Thank you all.

  Solved!

  The problem was my activity indicator. It was in the middle of the screen, and even if it was not visible, he kept receive key events.

  I solve it by putting this line inside the activity indicator (QML):

  touchPropagationMode: TouchPropagationMode.None

  Thank you jalue.

• I have a problem with the touchscreen doesn't work is not on the bridge zx4971g after performing a factory restore.

  Original title: I have a model zx4971g gateway after a reset of my touch is missing. I downloaded touchpack 7 he says I have no touchpoints on my computer, I did before factory reset do - what I'm doing.

  I have a model zx4971g gateway after a reset of my touch went I downloaded touchpack 7 it says I have no points of contact on my computer, idid before my factory reset.

  You will need to reinstall it from scratch. Factory reset is there for this... reset the computer to the way it came out of the factory. You need to reinstall all programs.

• Vista doesn't let me past the user account icon screen. Let me just highlight the icon / does nothing when double-clicked

  My computer will start up screen that displays the icons of users.  When I double click on my icon (or any other for that matter) it only highlights the icon and does not open it.  So basically I can't get through this form and have not been able to access anything on my computer.  What could be wrong here and what do I do to fix it?

  Hello

  Were there any changes made on the computer before the show?

  Method 1:

  Step 1:

  Try restarting your computer in safe mode and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you can log in to safe mode, refer to the link and try to do a system restore:

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Method 2:

  If you are not able to connect through safe mode, I suggest you try to do a restore from WinRE (Windows Recovery Environment) system and check if it helps.

  Insert the installation disk to perform the WinRE .

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• The writing on my screen has shrunk, and I do not have which cannot solve this problem.

  I did the update and change some settings so have no idea of what caused it. I'm not computers wiyh and ever learning mode. Thank you

  Hi Darrel edwards,.

  ·         A screen that has shrunk? Is it only on the desktop or with all windows?

  ·         What is the brand and model of the computer?

  Check the status of the display driver in Device Manager:

  a. click on Start

  b. in the run box, type in devmgmt.msc

  (c) in the Device Manager window

  d. expand graphic cards

  e. check if an error code is listed.

  Follow the methods below:

  Method 1: Try to change the resolution of the screen and check the results.

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

   

  Method 2: If the method above does not help, then you can also read the article and check mentioned below.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

  Let us know if it helps.

• When I try to open and turn on windows Defender I manually get 0X800106ba code have not been able to solve this problem, need help!

  do not have mcafee just use windows security, with all the protections on and running except windows Defender, it's my error 0X800106ba issue code

  The game, 16 December 2010 15:19:47 + 0000, redbluemoon wrote:
   
  > do not have mcafee
   
   
  Good. It is a very bad choice, in my opinion.
   
   
  > Just use windows security.
   
   
  It has no product called Windows Security. Do you mean Microsoft
  Security Essentials?
   
   
  > with all the protections on and running except windows Defender, it's my error 0X800106ba issue code
   
   
  If you mean that Microsoft Security Essentials, it turns off Windows
  Defender, because it does essentially the same thing itself and you
  don't need both. It is not a problem, and you should not try to fix it.
   

  Ken Blake (MS-MVP)

• LINKSYS WRP400: Voice recorded but the number doesn't work don't no (not in service) (no SIP response)

  Hello everyone,

  I have a weird and frustrating problem with some Linksys WRP400 and I hope you can give me advice.

  Long story short: the voice on the WRP400 line keeps stop working, even if it is registered on my SIP PBX. Only a reboot of the router or a stop put on the line temporarily fix the issue.

  Let's add some details: I had a lot of WRP400 installed and running, and not all of them have this problem. They all have the same configuration.

  I tried to work around the problem, reducing registry expires 3600 to 1200, defining to call without Reg and years call without Reg, setting on restrict the IP Source address and reset daily at 05:00. It doesn't seem to help.

  When the problem occurs, if I call the voice line number I get an error "the number you have dialed is not in service" or similar. Sometimes my clients said they can make an outgoing call, while the problem is still on, but more often, the line is totally silent on the outbound road.

  On my SIP PBX, I see that the number is regularly recorded, with the right timing.

  If I do a sniff of Wireshark on my SIP PBX, I see some regular "ask: INVITE sip:[email protected]/ * /: 5060; transport = udp, with description of session' a PBX to the router but the router never answers.

  If I reboot, the vocal line to re-register and start working again.

  I have attached a screenshot and the Wireshark Sniffer.

  I use the 2.00.32 latest firmware.

  You have any advice? It becomes an annoying problem and I am groping in the dark.

  Best regards

  Maurizio

  PS: Should I I asked Belkin or is it always in the right place?

  ---

  http://about.me/mauriziotroilo

  Hi, we use the WRP400 of the years and the voice module has always been problematic.

  I have a theory on this problem: I think that the safety function to "Restrict the IP Source address" crashes after a few hours of regular work and it filters all incoming SIP messages.

  You can confirm this idea by turning on the trace of the sip. In my case the trace shows all SIP entering until the reboot request.

  Can I ask you how many CPES you have?

  What is the frequency of this problem?

  In our network, we have about 2000 installed platform and we must restart on unit 2-3 per day.

  Kind regards.

• Echo effect doesn´t work in combination with the Roto Brush tool

  Hey guys,.

  This topic refers to another question, I already asked: duplicating a clip parts

  Basically, I wanted to reproduce the movement of a player of tennis in slow motion.

  With the great help of Rick Gerard and other members of the adobe community, I've managed to produce a result pretty solid:

  But the echo effect doesn´t works not at all.

  I followed the instructions step by step Rick Gerards constantly, but I had to adjust the framerate and the time of Echo to get a fluid motion:

  

  Now the doesn´t of echo effect works at all.

  Does anyone have an idea how to solve this problem?

  Best regards

  Mark

  You posterize time on all layers. You want only posterize time on the layer with the echo effect applied. You will need to follow the back wall and fix this info to follow-up on the middle tier to keep to keep executives frozen after the movement of the camera.

  The theory behind the effect is that Posterize you time on a layer, as well as see several copies of the same frame so you set up echo repeat those repeated frames. You put your background images under the layer of racket playing in real time, and you place a copy of your layer of racket above to play in real time so that the repeated images are under pictures of images in real-time.

  If you look carefully at my screenshot, you'll see that posterize time applies only to the middle tier.

• RoboHelp for Word 7 is not save the rtf and won't compile .hlp

  I use RoboHelp for Word 7 for producing WinHelp files. It has been working fine since several months on this computer.

  Just in the last week, I had a problem with my Word 2007 when you try to open a .doc file. I received the message that the nswrd632.wpc converter was not found. After a search on the Microsoft forums, I edited the registry and saved this converter.

  But now (and which may be unrelated to the Word Converter message) HR will not save the .docx or .rtf file. Whenever I click on save all, nothing happens. When I click project output, the message I need to back up the files, and I click Yes to all. Nothing happens except the message is closed. No files are saved and HR will not end. The only way I can get out of HR is to click on no, which means of course my changes are not saved. I can't save the file menu of Word .docx, either.

  Also, I can not compile the file. Yet once, no error message, just does not compile.

  I searched the Word HR forums, so that I reinstalled RH, made sure HR add-ins are enabled and removed all the .dot files. Nothing works. I went extracted 112 of Peter Grainge and followed the instructions there - no change.

  I found that, after making my changes in the Word document, if I save manually the RTF file by going into the directory Word save slot, the changes will be saved and HR compile the .hlp file - once.

  Any ideas?

  Hi, I have a problem almost identical, except that my project uses rather than .rtf files .doc files. I was able to solve the "unable to save" problem by following the information below. I still have not solved the problem "cannot compile.

  I use Windows XP, RH7 build 100, Office 2007. My project was created by using Office 2003 and I haven't lived all these issues until I recently upgraded to Office 2007.

  This correction was sent to me by guy 'tech' in my group.

  A number of Adobe RoboHelp for Word 7 users have reported that they cannot save the changes or generate output. The issue has been isolated to the RHComAdd.DLL be disabled.

  Check in Word:

  • For versions 2003, go to help | Everything | Disabled items. If RHComAdd.DLL display, re - enable.
  • For Word 2007, click on Office button | Word Options | Macros complementary. Under 'Manage' select disabled items, and then click Go. If RHComAdd.DLL appears, highlight it and turn it back on. (This IS WHAT I DID)

  You can also re - register the DLL. Go to start | Run and type the following line, assuming that you have installed RoboHelp at the default location.

  regsvr32 "C:\Program Files\Adobe\Adobe RoboHelp 7\RoboHELP\RHComAdd.dll"

  How to get off this DLL? The cause was identified as a Word document is open in Internet Explorer rather than in Word.

  This problem has been fixed in version 7.0.2.

  Hope this helps you. I'm still working on the compilation error.

  -Shannon Mooney