Satellite A210 - turs screen off after the Windows startup screen
When I start my windows there is the splash screen. After that, my screen goes off and cannot log on to windows.
Satellite A210
ATI Mobility Radeon HD2600
Where can I get some old drivers for the ATI Mobility Radeon HD2600, that I can install without starting windows?
> Where can I get some old drivers for the ATI Mobility Radeon HD2600, I can install without starting windows?
Please don t get me wrong, but I think you're on the wrong track.
(Graphics card, LAN, etc.) device drivers must be installed in the currently running system (i.e: Windows OS, etc.)
I m sure; pilot isn t the problem if nothing is visible on the screen.
First of all, I would recommend you to connect the laptop to an external monitor/screen just to see if something would be visible on the screen 2.
But just a question: have you tried to start Notepad using a boot disk (windows installation disc, the disc recovery Toshiba or similar?).
Maybe the Windows system is confusing upward and therefore, you are not able to start the system? In my opinion, you should test this option.
Tags: Toshiba
Similar Questions
-
Inspiron 9300 screen turns off after the Windows Logo screen
Inspiron 9300 my wife became severely infected. I thought I had some weird things start popping up of the problem decided to wipe the hard drive and start over. Unfortunately, I don't have to restore disks when I bought the computer. I install windows xp pro service pack 2 full retail version.
Installation was not a problem until I installed the driver ATI Mobility x 300. I followed directions for installation from the website, do the installation of xp followed of the dell system software update followed of chipset followed video driver. After that whenever I put on, the screen turns off after the Windows Logo. The computer is still running and if I plug an external monitor everythng is fine.
I tried all the troubleshooting tips I've seen in this forum. I did a full install twice. made of safety boots (all right), started in VGA mode (works fine), I ran diagnostics from fn on startup, including express, extended and video tests and they pass all the controls. I'm sure it's a software problem, but have been unable to solve. I've updated the ATI bios although when I run it says already installed and done one installs x 300 driver on 6 ttimes own.
I know it must be something simple that I'm missing. My system is the Inspiron 9300 with 2 GB of ram and the mobility x 300 card. Any help would be appreciated.
-
Latitude D610 screen turns off after the Windows XP loading screen
I'm having a problem with my Latitude D610 where after the Windows XP loading screen, the screen turns off completely. No BSOD, no login screen, just a white screen. This started happening at least a year, however, I bought a new computer if it is passed to the hatch. I tried the system restore when it appeared first without success. The computer starts in Mode safe. Any suggestions?
If it starts in mode without failure, then its almost certainly a driver and with the blank screen problem, I suspect a display driver.
-
Satellite A210 PSAFGE - no display after the update of the BIOS
Hello!!
I have Toshiba A210 PSAFGE. I have download BIOS OS from Vista to Xp and flashing.
When I tried to upgrade the BIOS setting, the system frozed.I reformulated the system using the power button.
There is no display on my screen when restarting.
I tried to restart by pressing F1, F2 and even removed the battery, adapter for a while, until what there is no display on my screen.I even tried connection and an external monitor, but that also there is no display.
At the moment I don't have any sort of recovery disk.I would be very happy if someone could help me.
Boyfriend... You should not have put off your system by updating the bios...
Closest contact center toshiba to recover such problems...
Sul
-
PC keeps restarting after the Windows startup screen
I recently bought a refurbished HP compaq 6005 microtour office format. The computer came with a blank hard drive with no OS loaded on this subject. Before this purchase, I owned a laptop with a Samsung EVO 850 250 GB SSD inside which has Windows 7 installed and worked fine until the motherboard went bad on it. I removed the SSD that laptop and installed in the new office refurbished. The computer starts up and reaches the HP invent display shows options key function and says "press any key to Option ROM Messages." and then after a few seconds goes to "starting Windows" screen and after a few seconds it goes back to the same HP invent screen.
I tried the things:
The hard drive is detected by a name in BIOS
Made sure boot order has been on hard drive, first
Tried to start Windows in Mode safe mode, last known good configuration and disable automatic restart in the event of system failure
When I disabled automatic restart in the event of system failure I got a blue screen that says, "a problem has been detected and windows was forced to need down to avoid any damage to your computer...". ""Search for viruses on your computer. " Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed. ... "CHKDSK /F to check for hard drive corruption, and then restart your computer.
Hello David,.
According to your description, I realize you are trying to install a Portable SSD hard drive in a desktop computer that has Windows 7 installed on it.
First of all I would say you do not to do since both hard drives have different specifications, and this can adversely affect your computer. I suggest you to contact the manufacturer of your computer before this change of material.
On Windows, it is not recommended to mix computers with different operating system installed on a hard drive specifications. I would say to reinstall the full operating system such that two computers use different Hardware.
Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.
Thanks and greetings
Sarandeep S - Microsoft technical support. -
Satellite P300 itself keeps restarting after the initial splash screen.
My Satellite P300 itself keeps restarting after the initial splash screen.
Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.
That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.
Any help or advice would be much appreciated.
Post edited by: aic-poppy
Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
To start the laptop in safe mode and let us know if it works, try it please. -
G62 screen remains black after the windows logo
Hello
I have a HP G62-b05SD. I noticed that many people have the problem of simmular.
I know what makes, but don't know how to fix it.
So here it is.
Sometimes when I boot / reboot system screen turns black after the windows logo, but if I wait a while, I do not hear the star tune up windows, but the screen remains black.
I noticed that this happens when I shut down or restart the system with a usb port (be it a mouse or a stick is not serious)
If I all out en usb port restart or turn on the machine for the first time this day here, everything starts well.
So there must be some driver problems I think with usb ports and the screen or something.
Help, please!
HP G62-b05SD
Windows 7 64-bit
Intel i3
ATI mobility radeon graphics card
Ow and when I get the black screen, the hard reset does not always work.
I also did a startup repair and it showed:
"If you have recently attached a device to this computer as a camera or portable music player, remove it and restart your computer. If you continue to see this message bla... bla... bla... "
I hope you can help.
Hi Frosty1984,
Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP G62 - b05SD Notebook and having problems with the starter. Here is a link to BIOS update.
What is the USB device that is at the origin of the questions?
Thank you.
-
Satellite A210-15J - no sound after waking from sleep in Vista mode
Satellite A210-15J, RAM 2x2gb, BIOS v1.70, Vista Ultimate x 64 SP1 (with all hotfixes), driver audio Realtek v.2.01.
After the Windows Vista recovery, high-definition audio (HDA) device is not working properly. There is no sound, only noise.
This FAQ from Toshiba document may help you:
[High definition audio device may no longer work after resume Windows Vista from hibernation or standby | http://aps2.toshiba-tro.de/kb0/TSB7601WX0004R01.htm]
_The solution is simply: _
You must download and install the fix from Microsoft site 937077.See you soon
-
Driver satellite A210 - 16G Mass Storage Controller for Windows Vista 32-bit
Hello, I need driver Toshiba Satellite A210 - 16G Mass Storage Controller for Windows Vista 32-bit. If you have the installation file, please redirect me if you have any other file, please explain to me where to install it.
If I were you I would take a look at the site to download the drivers from the main Toshiba page, because you will find everything you need.
The mass storage controller can be the HARD drive controller or the controller of the SD card. I want to download both of them.Here´s a direct page link drivers: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Welcome them
-
computer does not start after the Windows XP logo window
Windows xp home edition
service pack 2
Dell inspiron 15011. computer does not start after the Windows XP logo window
2 works well in safe mode, even connect to the external monitor
3. I reinstalled xp many times, problem stil exist.All the answers?
Hi dhanushm,
- What happens after the Windows logo screen?
- You receive an error message?
- You have security software installed on the computer?
- Have you performed an installation clean Windows XP and even after that this problem exists?
Method 1
As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.
I suggest that you configure the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
- Click Start , and then click run.
- Type msconfig , and then click OK.
The System Configuration utility dialog box appears. - Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
- When you are prompted, click restart to restart the computer.
Method 2
If fails it above step can refer to the article below and try the steps mentioned, check if it helps.
After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen
-
Network icon is missing from the notification area after the window updated
I have some problems about the notification for the network and the volume icon!
They are missing after the window updates!
I tried to check the "Taskbar and Start Menu Properties' > 'Notification area', Volume and network are grey which I cannot check these boxes. Grateful if you could help me solve this problem!
Thank you very much!Hi VisBo,
Welcome to the windows vista forums.
Please follow the steps below to resolve this issue:
1. right click on the taskbar and click Properties.
2 tab Area of Notification .
3 check (on) or disable (off) the options you want or do not want to display on the Taskbar Notification area.
For the network icon, you can also do with the registry.
NOTE:
Please be careful while making changes to the registry, any undesirable changes can affect your operating system.
1. click on start.
2. in the start menu search bar type regedit, and then on enter.
3 Please go to this location in the registry by expanding each location by clicking on the brand more on the left side.
HKEY_CURRENT_USER\Software\Classes\LocalSettings\Software\
Microsoft\CurrentVersion\TrayNotify4. remove the keys 'IconStreams' & 'PastIconsStream '.
5. start the Task Manager by pressing ctrl + alt + delete at the same time.
6. in the Task Manager right click on explorer.exe and kill the process.
7. click on applications in the task manage, press new task and type explorer.exe, and then press ENTER.
Explorer will now reboot and your icons should return.
Alternatively, you can try to uninstall the most recent update that has caused the problem. You can uninstall an update by clicking on the icon of the program features in Control Panel. Select the update that caused the problem, and then uninstall it.
You can also make a selection of updates to install by setting the windows updates to notify you before installing an update. To open this Panel, and then click windows updates, click settings.
I hope this information is useful.
Please let us know if you need assistance.
Concerning
Rehman - Microsoft Support -
USB mouse & keyboard disabled randomly after the Windows 7 login Panel
Hi all
Randomly, after the Windows 7 login Panel, windows disables my keyboard and USB mouse.
-No problem in BIOS or on the login Panel, but once the credentials entered and valid, and reaching office, mouse and keyboard (USB) close
-To solve the problem, I need to reboot several times, waiting for an instance where my devices are not closed (so it works without any pb until the next reboot)
-J' have a backlit keyboard and when the problem occurs, light are turned market, as if it was turned on and turned off randomy
Searching the Internet, seems, I'm not the only to encounter the problem, however single chip found Advisor on these was mentioning it is a bug in Microsoft Windows 7, associated with the management of the power supply of the USB ports. However the advice provided to change the config to disable these judgments do not work...
Thanks in advance for your help and best regards
Fabrice
Have you tried to go to safe mode with networking Mode and update your USB drivers?
You didn't say you had the problem goes mode without failure, so it might be a solution for you.
USB drivers should be found at the web page of the manufacturer of your computer or your motherboard manufacturer's web page.
-
When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?
Hello. Do you mean "Turn off" or "sleep"? Your iPad there cell phones, or is it only WiFi?
-
After the Windows 8.1 update, can not access Internet in Firefox or Chrome, but IE 11 OK.
I reinstalled the latest firefox, still cannot access Internet from Firefox.
Microsoft is ridiculous?- Run cmd.exe as administrator
- Type "netsh winsock reset" and then press enter
- Restart the PC
-
Satellite A210-16F - part number for the chassis need HARD drive
Hello
does anyone know what what is the * part number of hard drive for toshiba satellite A210-F16 chassis *.
The model number is * PSAELE-01S009G3 *.
I had a frame of HARD drive with a V00927210 part number that does not match this pattern.
If anyone knows of a reference number or if it can display an image, at least, I would be very gratefull!Thank you!
Hello
I put t know what HARD drive chassis you re meaning precisely because the HARD drive in my A210 notebook can not find in any media
It s just connected to the connectors in the HARD drive Bay.Anyway, if you need a few laptop parts (not looking at this as part it is) then I recommend you contact the ASP (certified partner) in your country in order to get a part for the Satellite A210 laptop model.
See you soon
Maybe you are looking for
-
Satellite L300D-13s - how can I restore with corrupted disk 2
The laptop is a Satellite L300D-13 s. I tried to restore the laptop using the restore discs, the first disc has worked well, but he did not recognize the second disk. No matter what I have I could not get to read this disc. I then tried the F8 option
-
Compaq cq58: bios administrator password
Nice dayI have a compaq cq58.I need the bios administrator password.The error code is 70769099.Please help.Thank you
-
Print the diagram on a plotter (ANSI-C)
I want to print my diagram labview on a plotter HP (ANSI C). Is this possible? Can I export the diagram in PDF size ANSI-C? Thank you case
-
Como puedo desproteger una memoria UN celular
Hola como puedo quitar the Protección contra una memoria telefono celular escritura y espero the answer is
-
I've been to the export of all my documents to an external hard drive all day... when I got back, some of my programs have disappeared too, especially my outlook express with all my emails (for the last ten years), is not in the programs, or in the m