My Apple Watch does not turn off.  When I go to turn off the slider isn't in the article to stop, I can restart but the cursor still does not appear

Similar Questions

• my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  HI - try the following steps:

  On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):

  -Double-click the Home button, and then drag upward on each of the app previews to close.

  It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

  If this does not resolve the problem, try next disconnect and rematching of your watch:

  -L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.

  -Choose to restore the watch (backup restore) when provided the opportunity during the whole.

  -Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

  - Pairing your Apple Watch and Support Apple - iPhone

  - Set up your Apple Watch - Apple Support

• Series a Apple Watch does not always display

  I was the first of the Apple Watch in October 2015.  Sport model.

  Just in the last month when I flip my wrist the display lights not sometimes making me turn my wrist a second or rarely a third time so that it lights up.

  Is this a known problem or a problem?

  Hello

  No, this is not a problem or a known problem.

  The following steps may help:

  • Restart your iPhone and your watch, both turn off together, and then restart your iPhone first:
    • Restart your iPhone, iPad or iPod touch - Apple Support
    • Restart your Apple Watch - Apple Support
  • Disable the twinning and re - pair your watch:
    • The app shows on your iPhone takes a backup of your watch automatically when the disparity with the app choose to restore from backup during the whole upward. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
    • Cancel the twinning of your iPhone - Apple and Apple Watch Support
    • Set up your Apple Watch - Apple Support

• Unlock with Apple Watch does not

  Hello

  I'm running a MacBook Air mid-2013 with macOS Sierra, with a 2nd Gen Apple Watch watchOS3 running. I'm on the same Apple for my Air ID, see and iPhone (6 s).

  But unlock with Apple Watch does not work on my Air. I activated 2 factor authentication. I checked the box that allows to unlock with Apple Watch. Everything seems to be kosher.

  When I close and reopen my Air, "Unlock with Apple Watch" appears for about 10 seconds, and then I type my password.

  Help? Thank you!

  I also have this problem. I have 2 accounts on my Macbook. One is the first account that I don't use, second my regular account. On my Second account, it of the same problem, but with the Admin account... It works.

  I Don t know why.

  Do you use also two accounts?

• Apple Watch does not appear in the security/privacy settings my mac (2015)

  Apple Watch does not appear in the security/privacy settings unlock my mac (2015) for auto

  Hi abcd_bruce,

  Thanks for stopping by Apple Support communities. I understand that you are eager to implement the feature Auto Unlock on your MacBook Pro. It is a new system and I'll be happy to help you with this.

  Looks like you did a few steps already to help lift this step. In this article, automatically unlock your Mac with your Apple Watch, he goes over all the steps that must be done to implement this place. If you already followed all these steps and are still problems, then the next step would be to start the Mac in safemode, and then check if you are able to see the Apple Watch see the implementation of the security and privacy preferences.

  Try safe mode if your Mac does not end commissioning

  Have a good night!

• Apple pays on Apple Watch does not

  Hello world!

  I'm a big fan of Apple pay, I use it anywhere that accepts it.

  A feature, I can't wait to try it immediately when I got my Apple Watch (24 hours ago only) was paying Apple.

  In the first hour of me set up my watch, I went to McDonald's to get a Coke (it's the closet place who agrees to pay Apple), so I could test Apple pay.

  When I put my watch next to the drive, nothing happened. The screen remained black all the time. To complete the transaction, I pulled out my phone and also, which didn't work. I used pay Apple on my iPhone, several times the same McDonald's before and it's always worked flawlessly.

  A few hours later, I had went to Best Buy to buy wireless headphones and once more tried to use Apple pay on my watch for the purchase. But unfortunately, nothing happened here either. The watch remained black all the time.

  While I was trying to make it work, I noticed my iPhone wake up (he was placed flat on the counter) and displays the message - "Hold iPhone close reader" (I forgot the "exact" wording). When I gave up on the Apple Watch, I took my phone to purchase and it worked perfectly.

  Now, whenever I have install my credit card on the iPhone, I have to check (via a SMS of BofA code). When I looked at the settings in the Apple Watch app on my iPhone - I saw my already credit card. I clicked on the button 'Add' next to her, that I then invited to add security code 3 digit number to check. Once I did, my credit card was placed under the header indicating that it is an active card on the watch. And a few seconds, I had received a notification on the watch let me know it was ready for use.

  I guess it is setup correctly, which miss me so much? Are there any ideas as to why my Apple Watch does nothing?

  Sorry to ramble on and on. I wanted to give you all the details in the hope that maybe someone can point me in the right direction to solve this issue.

  Thank you in advance for your help!

  -Jason

  Hi Jason

  In order to pay using Apple pay on your watch, you must first quickly double - press the side button.

  It will then display your default map. If you have added other cards and you want to use one of them instead, swipe to switch between maps. With your favorite card displayed, hold your watch up to the Terminal:

  -The dial of the watch must be faced with and parallel to the screen of the own terminal (you shouldn't be able to see the face of the watch and pay), aligned in the Center with the logo without contact on the terminal screen and held less than 10cm.

  -It must be blocked in this position for up to a few seconds, until you hear the confirmation beep and the pulse haptic.

  More information: defining and using the Apple pay with your Apple Watch - Apple Support

• My Apple Watch will not charge on the charger.  I cleaned the back of the watch and the charger.  Any ideas?

  My Apple Watch will not charge on the charger.  I tried to clean the back of the watch and the charger more used several points of sale, but in vain.  Any ideas?

  Hello

  When you reload your watch, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
  • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
    • Some docks of watch, brackets, cases or protectors might hinder it.
  • You use a real Apple magnetic Charging Cable or a certified Apple module magnetic charge.
  • If you reload your watch by plugging into a power outlet:
    • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
    • Try to use different maps of the following:
      • The real Apple USB Power Adapter that came with the watch, or;
      • A true 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
      • A third-party certified 5W (MFi) Apple USB power adapter.
    • Try to charge via a USB port (see following).
  • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).
  • If your battery is very low, you may need to wait a few minutes for the green lightning appear (confirming that the charge has started).

  Once the load has started, you can tap on the screen at any time to check the progress (leave a few minutes at the beginning, where the watch is in charge of a very low battery level). A green lightning bolt symbol indicates that your watch is being loaded. It is normal the screen back to sleep while continuous load.

  More information:

  Check your battery and load your Apple Watch - Apple Support

• How to configure applications 'Find my iPhone' on the Apple Watch of fallback to iCloud, when the bluetooth connection is interrupted?

  It would be ideal if applications of "Find my iPhone" Apple Watch can be redirected via iCloud when the watch is connected to wifi, but the bluetooth with the phone connection is lost.

  Ongoing enforcement watch OS 2.1, coupled with the iPhone 6 more (iOS 9.2). Thank you!

  Hello

  The feature you described is not currently available on Apple Watch.

  It is a community of support based on the user, but if you want to suggest that Apple considers adding that as a new feature, you can do so here:

  https://www.Apple.com/feedback/watch.html

  All submissions are read (even if you do not expect to receive a response).

• When I opened a new tab, the cursor is automatically in the field of navigation, because I reinstalled Firefox yesterday. Is there a solution?

  When I opened a new tab, the cursor is automatically in the field of navigation, because I reinstalled Firefox yesterday. Is there a solution?

  I solved.

  I installed mutorrent, which in turn installed 'Safe Protect' of 'Intermediary' that messed up my Internet browser settings.

  I uninstalled it and everything turned back to normal, when I opened a new tab, the cursor is automatically in the address bar (ie. it is highlighted).

  Thanks for your time.

• When I remove, move a file, the files still show in the old directory

  Original title:

  Refresh problem with the Explorer of Windows 7;

  When I delete, move a file, the files still show in the old directory... discount seems to be done?

  Sometimes, the program stops.

  All quick & easy Microsoft solution or someone? l

  I have the same problems - I always shows the photo files that have been moved, but they are empty and only appear in some online programs where I load pictures to.

  That is to say

  1 photo folder is moved to picfoldersall... I go to site abc to the peaks of the peak 2 (that have not been moved) project manager and file picture 1 and 2 still show in the pictures folder.

  I ran several anti-test virus and nothing shows that Microsoft, symatics and Comcast, pretend that I have a virus and all want to charge me $ 99 and none have even done a scan...

  So what's up? > I use windows 8

• When I try to open after the effects of a window appears saying alert last log message was: < 140735110578944 > < BEE_work queue > < 5 > main thread of stacking: 524288 log crash generation may take a few minutes

  When I try to open after the effects of a window appears saying alert last log message was: < 140735110578944 > < BEE_work queue > < 5 > main thread of stacking: 524288 log crash generation may take a few minutes. Help, please

  Contact Adobe support.

• Apple Watch does not a Ding noise when you plug in the charger

  Recently my watch Sport Apple stopped making noise "ding" when I connect the charger it. This is happened after I changed the bands and noticed two green lights on the back of the watch as I turn off the watch. I checked the volume on both the watch and the app on my iPhone 6 Plus and they are correct. Has anyone experience this problem?

  Hello

  Try to restart or if it does not help, force the reboot - your watch:

  -Restart: Press and hold the side button until you see the cursor off the power; slide it to turn off; Hold down the side button until you see the logo.

  -Force the reboot: hold down the side button and the digital Crown for about 10 seconds, until you see the logo.

• When I turn off my Apple Watch and then turn it on, the face of the watch I changed other randomly

  Every night I turn off the Apple Watch and the next morning turn it on. Recently it chages the Apple face a random and erase one had. I have restore the

  Hello

  If you have not already done so, it can help to upgrade your iPhone and Apple Watch to the latest version of the software, from your iPhone:

  • Update the software on your iPhone, iPad or iPod touch - Apple Support iOS
  • Update the software on your Apple Watch - Apple Support

  Rather than spend your watch every night, you can find more convenient to charge your watch every night, from one day to the next.

  The watch cannot be overcharged, and the battery won't suffer harm of regular refills done every day. The load will automatically stop when the battery is fully charged and will start again if necessary due to the use of the current battery.

  Follow Apple's safety and handling instructions, and note also that:

  • It is not possible to turn the watch off the coast while it is on the charger and connected to the power supply - what is normal.
  • It is also normal to watch, adapter sector and charger become hot when it is connected to the power.

  More information:

  Check your battery and load your Apple Watch - Apple Support

  Keep Apple Watch in acceptable operating temperatures - Apple Support

• Why my Apple Watch does not display my photos when I double tap to show my card to pay with?

  I Double click on the button on my Apple Watch, to pay for an item at the checkout and it maintains show my photo favorites... not the card to make the payment

  with.  I am confronted then with passing by pressing this button several times so that it can display the map so that I can complete the payment.  Why is this?

  Restart your Apple Watch, and then press the button twice to activate Apple pay.

  

  Restart your Apple Watch

  With the help of Apple pay in shops

• Apple Watch does not ask for password

  In recent days, I discovered something disturbing.  If I take off my Apple Watch and put back on without having to type in the code 4 digit, even after an extra charge per night, it will not ask for a password after an hour or two and works normally.  If it's supposed to happen?  I couldn't find anything in the support forums.

  I got my setup shows to use a password because I got it last December.

  Suzanne

  Hi Suzanne

  If you use the following settings:

  -On your iPhone, in the application of Eve, go to: My Watch (tab) > General > detection of wrist - on.

  -On your iPhone, in the application of Eve, go to: Watch My > password > enabled.

  -Also on screen settings of password - unlock with iPhone turned on.

  Then, after putting on your wrist, your watch will unlock after whatever you do first: unlock your watch manually (by entering the access code) or unlock your iPhone.

  Then, it will remain unlocked (including when the screen is idle) until you remove it from your wrist. When you remove your watch, it locks automatically.

  More information:

  https://help.Apple.com/watch/#/apd748b87e2a