Apple Watch does not ask for password
In recent days, I discovered something disturbing. If I take off my Apple Watch and put back on without having to type in the code 4 digit, even after an extra charge per night, it will not ask for a password after an hour or two and works normally. If it's supposed to happen? I couldn't find anything in the support forums.
I got my setup shows to use a password because I got it last December.
If you use the following settings:
-On your iPhone, in the application of Eve, go to: My Watch (tab) > General > detection of wrist - on.
-On your iPhone, in the application of Eve, go to: Watch My > password > enabled.
-Also on screen settings of password - unlock with iPhone turned on.
Then, after putting on your wrist, your watch will unlock after whatever you do first: unlock your watch manually (by entering the access code) or unlock your iPhone.
Then, it will remain unlocked (including when the screen is idle) until you remove it from your wrist. When you remove your watch, it locks automatically.
Tags: Apple Watch
So I put a password on this disc using the supplied software.
Then I took to use on another PC and it will not ask for a password?
Do I have to install the software password on all laptops / PC that I use?
Lock password software is needed to define the password reset / clear the password already set.
If the HARD drive / data on the disk HARD has been already locked, you should always asked a password in case you want to access the protected data.
I'm no stranger to permissions etc as I work in it, but it confused me after 4 hours of messing around.
I'm trying to make sure that when I share a file on my home network that windows requires a password in order to access what it is not doing.
The following conditions are true for both machines:
Are windows 7 Home premium
Have file sharing enabled on each respective network adapter
Are members of the home network
Are both on the network, called "WORKING group".
Assistant file sharing was turned on and off then to make sure it wasn't an influence, it is currently off as he auto-actions the user root folder.
Network discovery is on
File sharing and printer is on
I tried the two combinations of sharing folders public or not, but is currently disabled.
Streaming media is off
Password protected sharing is on
Tried the two combinations of user accounts and passwords to connect to other computers. (This is currently set to allow windows to manage)
So I won't list them the public parameters are not relevant.
I put one hand on my laptop remove 'Everyone' and 'administrators' only have my own authorized account which is be an administrator.
My other machine but I still seem to be able to open and access the folder. I tried to change advanced sharing permissions and security settings to exclude any group that can be let my other pc on the network but so far still no prompt for password.
I even went to regedit and apply the following on both machines:
1. Open Registry Editor (Start search - regedit)
2. navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
3. create a new DWORD value with the following properties: NAME: LmCompatibilityLevel
4 reboot your PC and try again to establish the connection.
Can anyone help?
Thank you people!
I think I've cracked the question:
I created a new account admin on my PC and the first time I tried to access anything, I got the password. I don't have it a second time.
I then removed and put in the passwords and then disconnected cache and back in and asked again the password.
I tried the same thing on my other account, but it has not yet requested.
It turns out that even on another computer, if you have the same username and password that it automatically authorizes for good once you enter the network password first.
- I created a standard account for one of my children. He installed a program that refused him permission to run. I went to "run as administrator" and should be asked for a username and password to allow him to use the program. Instead he gave me the same error message access denied.
- I then tried to implement other programs on his desk to run as administrator and they opened, but they ask me password. Why not invite me for a username and passoword?
But the my administrator account has a password!
Log in as administrator, and then set a new non-empty password. Now, repeat the test under your son's account.
my email account does not give me a sign in page to put my password.
Try http://mail.businesscatalyst.com. Enter your e-mail address and password and you should be able to access your mail.
See you soon,.
I put my settings to use one password to update apps on my iPhone 5, but since I have not upgraded to iOS 10 none appearing guest to enter the password when I hit the button to update for any application.
Please think about if I'm missing all parameters
I don't think that a password has already had to update the app store applications that are already installed on your device. Just enter a password when you download an app for the first time.
I try to install configure the management agent on a few nodes of the RAC on Windows Server 2003 64-bit. I installed the agent on other hosts before, but not on clusters. Installation seems to be pretty simple, YES the other nodes automatically detects and installs on them. However, when I do the installation of cluster, I am never invited to the agent registration page register with the administration server. He's asking the host name of the server and port, but never the password. Then the agent installs and starts the service, he is never seen by the administration server.
Has anyone encountered this before? Is it possible to save it now, or should I just try to reinstall manually?
This is an expected on windows cluster behavior, registration of the agent will not be asked.
Once the user installation must ensure the agent on each node manually by emctl sure agent
Have tried just about everything I can think of. computer is connected to the front secure networks without problem.
More information would be useful. Windows XP did not support thereafter until SP3 WPA2 wireless encryption, so if you have not installed SP3 and try to authenticate on a network protected by WPA2, it may not work.
Assuming that you do not have SP3 installed, try to go into your wireless network configuration / configuration screen. (There are several different configurations of wireless, including ZeroConfig, but we do not know that you are using). All most of them save previous in a 'profile' wireless connections so that when he meets this wireless again, he knows how to configure itself. Find the section of your configuration screen profile, look for the SSID of the router you are trying to connect, and if you see it, then delete that profile. This will allow your machine to then reconnect to the router wireless with an open mind.
Hello! I had a bit of problem my computer! Every time I have start or restart, it does not ask for my password! I have a big family and I only used of the on my account! I got the editable or something like that! I mean I can delete others has put some programs and all that! But when I start my computer, it does not ask for my password! Just open on my account! I already try to reset a password and everything and it does not work! But when come from my screen saver and I want to go she it ask for my password and it is normal that is what I want and when I she ask for my password, but if I restart or close and open it again it open on my account so EVERYONE can go on it! So please help me! Thanks to all the people who read this and thank you to all who will help me!
Please see the link below with respect to automatic logon.
How to enable the automatic logon in Windows XP
I'm running a MacBook Air mid-2013 with macOS Sierra, with a 2nd Gen Apple Watch watchOS3 running. I'm on the same Apple for my Air ID, see and iPhone (6 s).
But unlock with Apple Watch does not work on my Air. I activated 2 factor authentication. I checked the box that allows to unlock with Apple Watch. Everything seems to be kosher.
When I close and reopen my Air, "Unlock with Apple Watch" appears for about 10 seconds, and then I type my password.
Help? Thank you!
I also have this problem. I have 2 accounts on my Macbook. One is the first account that I don't use, second my regular account. On my Second account, it of the same problem, but with the Admin account... It works.
I Don t know why.
Do you use also two accounts?
Apple Watch does not appear in the security/privacy settings unlock my mac (2015) for auto
Thanks for stopping by Apple Support communities. I understand that you are eager to implement the feature Auto Unlock on your MacBook Pro. It is a new system and I'll be happy to help you with this.
Looks like you did a few steps already to help lift this step. In this article, automatically unlock your Mac with your Apple Watch, he goes over all the steps that must be done to implement this place. If you already followed all these steps and are still problems, then the next step would be to start the Mac in safemode, and then check if you are able to see the Apple Watch see the implementation of the security and privacy preferences.
Have a good night!
my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.
HI - try the following steps:
On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):
-Double-click the Home button, and then drag upward on each of the app previews to close.
It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:
-To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;
-To switch on: press and hold the side button until you see the Apple logo.
If this does not resolve the problem, try next disconnect and rematching of your watch:
-L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.
-Choose to restore the watch (backup restore) when provided the opportunity during the whole.
-Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
WiFi and apple tv does not connect for home sharing
Please give more details about your configuration, the version of the Apple TV and software, home sharing server, etc. Others here know much more about it as I have, but they will need a clear description of the problem. You can also try to search for this site for home, sharing problems and take a look at any recent threads that you present to.
You use the same Apple ID everywhere? ATV currently sems to have problems with Apple improved authentication protocols, so I hope they are not turned on for your Apple ID. You have enabled sharing House in configuration of the ATV?
My Apple Watch does not turn off. When I go to turn off the slider isn't in the article to stop, I can restart but the cursor still does not appear
It is not possible to disable Apple Watch when its on the charger and connected to the power supply - this is normal.
Error message: Picture.library.ms no longer works. Tried to remove the library as suggested but does not ask for confirmation delete a few deletions without asking for confirmation.
Error message: Picture.library.ms no longer works. Tried to remove the library as suggested but does not ask for confirmation delete a few deletions without asking for confirmation. Also don't undersatnd how then restore you the other context using the trash of the library? Don't understand that your instructions please the ventilation in portions of beginner. Is - this recurring issue is sought in microsoft?
You solved the problem with the photo library?
You have been informed that the question about the image library is fixed in the next thread.
If you are now facing problems with videos from YouTube on Internet Explorer 11, try the steps in the above thread link and check.
Let us know if you need help with Windows related issues. We will be happy to help you.
Maybe you are looking for
How I discovered the name of the theme is currently installed in my browser?
I go online and download real player and windows media player. When I try to install, I get a message that tells me that they can not install unless I'm onlline. I'm online. I click try again again and again and re download again and again. Whenever
LabVIEW 2011 Looking for ideas on how to debug an application that crashes only from within the executable. Is there something useful that this error report can be used to, thanks in advance. #####Date: Tuesday, August 23, 2011 15:10:18#OSName: Windo
How can I disable AutoScroll frustrating in Windows 7? Whenever I try to type, or even move the pointer - the scroll bar active!
Hi guys,. I'd love to help I bought a HP DV6-3042TX about a year and half ago. I hadn't used for a while and when I turned it on, he had to do updates etc. for windows 7. These all downloaded and installed. However after they have installed I coul