My B50-80 ram usage is too high for a few days

Similar Questions

• Please think when the memory usage is too high.

  Hi all

  My version of Oracle is 11.2.0.4 64-bit

  And Linux version: SUSE Linux Enterprise Server 11 (x86_64) SP3.

  Use of memory on the server is too high.

  AP - GV - SP713:orasop 55 > free t m

  total used free shared buffers cached

  MEM: 258341 257482 859 43775 8 219455

  -/ + buffers/cache: 38018 220322

  Swap: 65535 3919 61616

  Total: 323877 261401 62475

  AP - GV - SP713:orasop 56 >

  Top of PAGE process 10 consuming the most memory is below -.

  AP - GV - SP713:orasop 56 > ps to the | Sort - nk + 4 | tail

  orasop 15385 3.7 0.0 30937152 9916440?    SS Nov23 01:40 ora_dbw2_SOP

  orasop 15408 3.7 0.0 30933376 9809912?    SS Nov23 01:39 ora_dbw5_SOP

  orasop 35335 3.8 0.6 30932204 10316356?   SS 04:32 03:00 oracleSOP (LOCAL = NO)

  orasop 7121 3.8 0.1 30932164 10296904?   SS Nov24 01:51 oracleSOP (LOCAL = NO)

  orasop 10997 3.9 0.3 30928188 10457696?   SS Nov24 03:34 oracleSOP (LOCAL = NO)

  orasop 15371 3.9 0.0 30937024 10399132?   SS Nov23 01:44 ora_dbw1_SOP

  orasop 7216 4.7 0.8 30929072 12475216?   SS 05:08 03:55 oracleSOP (LOCAL = NO)

  orasop 14793 5.0 0.6 30940416 13390616?   SS Nov24 06:29 oracleSOP (LOCAL = NO)

  orasop 18524 5.0 0.7 30928112 13329416?   SS Nov24 07:08 oracleSOP (LOCAL = NO)

  orasop 31019 11.2 5.9 30926108 15609268?   RS 06:14 42: 21 oracleSOP (LOCAL = NO)

  AP - GV - SP713:orasop 57 >

  In the oracle memory setting is:

  SQL > select decode(pool,null,name,pool), round (sum (bytes) / 1024/1024,4) MB in Group v$ sgastat by decode (pool, null, name, pool) order by 2 desc;

  DECODE (POOL, NULL, NAME, POOL MB

  -------------------------- ----------

  BUFFER_CACHE 15360

  Shared pool 13952

  pool of Java 448

  log_buffer 56.9688

  fixed_sga 2.1634

  Please suggest if the memory must be increased and also I see a dynamic memory management is not turn on on the server.

  SQL > show parameter sga_target

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  SGA_TARGET large integer 0

  SQL > show the memory_target parameter

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  memory_target large integer 0

  SQL >

  SQL > show parameter sga_max_size

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  very large integer SGA_MAX_SIZE 29952 M

  SQL >

  Please suggest.

  Thank you before acting.

  Concerning

  Jean Louis

  Yvon says:

  Please check the error of the alerts log when the database is set automatically.

  WARNING: VKTM detected a drift of the time.

  Time derivatives may cause unexpected behavior, such as wait times. Check the file path for more details.

  Mon 23 Nov 20:41:17 2015

  Closure of proceedings (immediate)

  Closure of proceedings: in addition to logons disabled

  Stop background MMNL process

  MMON background process stop

  The high waters = 53 license

  ALTER DATABASE CLOSE NORMAL

  ORA-1507 marked during: ALTER DATABASE CLOSE NORMAL...

  ARCH: Disabled archives due to the stop: 1089

  Stop process to archive

  Archiving is disabled

  ARCH: Disabled archives due to the stop: 1089

  Stop process to archive

  Archiving is disabled

  Mon 23 Nov 20:41:20 2015

  Stop background VKTM process

  Mon 23 Nov 20:41:22 2015

  Instance shutdown complete

  Concerning

  Jean Louis

  I say that DB was reduced by human intervention based on below

  Accident never issue SHUTDOWN IMMEDIATE

  After the accident alert log shows DB followed by BOOT messages running.

  > Closing instance (immediate)

  Problem exists between keyboard and Chair only.

• Satellite A200 crashing when moved or when the CPU usage is too high

  Well so recently my Toshiba Satellite A200 started crashing everytime I have to pick up the laptop or run any processes taking the CPU up to 100% usage.

  This means essentially no rendering 3D games and no Photoshop or current iTunes running at the same time, etc. Here are the best even if it happens only when the laptop is plugged and not when only battery power. I tried to use another AC adapter, and I cleaned the hard drive for a new installation of Windows 7 that never solved the problem. I even went so far as to update the BIOS.

  I am not quite determined that he is just a hardware problem, but I was wondering if anyone had suggestions about which party can act up on me. As I said still works like a dream when running on battery power.

  > Here is the kicker if this happens only when the laptop is plugged and not when only battery power.

  The energy saving switch to another profile, using the AC adapter.
  Maybe you can try to change the speed of treatment at a lower level and could increase the cooling method parameters in the energy saving profile when the AC adapter is in use.

  Otherwise, it could be a hardware problem and in this case, you will need a help of ASP.

• PE 3 - DVD burning error - data rate too high

  I imported a slideshow of Photoshop Elements 5.  I made minor adjustments and added music.  Now I am trying burn to a DVD.  3 EP passes through the encryption stage and when it gets to the burning stage I get the following error message:

  "The flow of data in this file is too high for the DVD.  Youy should replace the file with one of a lower rate. »

  I get this message when I try to burn on a DVD or a floder.

  Any suggestion greatly apprciated.  Try burning a DVD for this weekend.

  Dave

  Dave,

  As a little "trick," pick up some discs DVD RW to test - no more "coasters". Do NOT use these drives delivery, but only for use/reuse as tests.

  I use the pre big brother, PrPro and more (creation) and yet always did a great job in auto mode, but some sequences could well bring pre evil in this regard.

  Please report your success.

  Good luck

  Hunt

• High CPU and RAM usage - laptop Dell w / Vista

  Hello

  I have read several posts and tried many suggested fixes, but none seems to work so far.

  Hardware: Dell Inspiron 1525, with 3G of RAM

  Operating system: Vista Home Edition Premium, SP2

  Problem: CPU high (~ 50%) and RAM usage (~ 50%) when ideling.  I did both a "clean boot" and boot into "Safe Mode with network" and neither seemed to make much difference and certainly has not resolved the problem.

  When I go to the 'task manager' is a process "svchost.exe" system which is the eater of resources.  I can move the tab "services", but I'm not really sure how to use the information presented.  This is where I'm stuck, as I said, I read a few other posts with similar (but not identical/software) and I've tried a few things but do not seem to be able to solve the problem.  Please let me know what the next logical steps are at this address.  Thank you.

  Mark

  Try to scan with malwarebytes free:
  http://www.Malwarebytes.org/products/malwarebytes_free

  Also update windows to the last available update.

  It might the ProfSvc (user profile Service). Try to connect to a different profile (user) and see if the problem is also present.

• LabVIEW 2016 high RAM usage

  I just upgraded to LabVIEW LabVIEW 2015 2016. Previously, I had no problem of memory. With 2016, however, even though I have a few screws open, rest, only LabVIEW uses 3 GB of my RAM. As I only have 4 GB, it slows down my computer to a crawl. Everyone knows these problems with 2016 or someone has a solution to reduce the amount of RAM LabVIEW requires? Thanks for the help.

  One of my colleagues has some portable "cheap" that are configured in the same way with minimum memory (4 GB).  Even when you are running Windows XP (which, in my view, is smaller and needs less RAM than, say, Windows 08/07/10), it has been very slow to do anything (can you say 'Wait 5 minutes for the OS to load'?).

  When Windows is "do its thing" correctly, it usually creates a swap file so that the software can use more than 4 GB of storage space for himself.  As I have indicated in my answer, LabVIEW 2016, when loading, seems to take a small fraction of this (a few hundred MB), even with the open code diagrams and block.  However, if your PC takes several minutes to start, runs very slowly in doing routine tasks and is an 'old' or ridiculously short of memory, it may be wise to (a) upgrade your memory (if you can), or (b) to upgrade your PC to the less a machine with 8 GB.  Remember, you use the PC to run LabVIEW, a solid programming / Data Acquisition/Platform Instrument I/O, surf the Web, send e-mail, or (hmm, I was going to say 'play', but games moves too, and tend to put more demands on the LabVIEW PC material, so both worse...).

  Bob Schor

• 1 Web site increases ram usage until Firefox slows, then crashes...

  Week or two ago FF33 started to have nits and jerky, gel and then crashed. I went through many support troubleshooting tips p (it comes crashing at this point) pages, uninstalled FF33, deleted files FF, that I could find, which was not all files, installed FF35 FF33, same result.

  Finally found my ram usage is high and paid attention to this. Reduced to 1 site constantly running up to the use of the ram. Regardless if 1 or 30 tabs of this Web site are open. If 1 tablet Omnium ram goes until it crashes. If none are open from this site, FF is fine. I've been on this site for many years without problems and really need to access.

  Any ideas how to solve the cause of that specific Web site?

  Thank you.

  Long answer, posted, empty response is entered. Anyway, great FF now.

• Why has my Aspire 5750 G temperature - is too high

  Hello guys. Why has my Aspire 5750 G temperature-"6 GB RAM / Intel Core i7 2630QM 2.0 GHz 2.93 GHz / 540M GPU"

  is too high as it my power options is high-performance but in any kind of power change options, there is nothing

  Sorry for my bad English

  To be honest, I think it's quite normal. Its an old laptop, 2nd generation and it is a processor of 45 w. (QM)

  I have an i5-6200U, and my time will never more than 60 C. Its 15W

  Maybe you should clean the fans a little, if you've never done before.

• Satellite L850 - 150 PSKDLE - a little too high internal temperature

  Hello friends of support.

  Satellite L850-150 PSKDLE - 07L 00
  Slow times get a little hot atm... (60 - 70).

  If I want to change the cooling block, but my problem is how to disassemble the laptop?
  Google does not want of hits on this topic...

  Can someone help me with this?

  Thank you very much.

  In my view the 60-70 ° C are not too high.
  For me high temperature is about 80-90 ° C, but at 60 ° C is nothing unusuall.

  Furthermore, always depends on how you use the laptop and what software is running.

  Play games, you will always notice a higher temperature.
  In General, you should pay attention to the internal cooling fans.
  Dust and debris could be the main reason for a higher temperature and clean the holes and vents should be good enough to keep the temperature low.

  Use compress air jet to get rid of the dust. Usually, this helps.

• Too high temperature on Satellite Pro L20?

  Hey,.

  last night, when the temperature of the 'Temp 1 meaning' of game reaches 101 ° C / 210 ° F.

  Is - this too high?

  My Toshiba Satellite Pro L20 is now almost 5 years old. The fan works and the Bios for the cooling setting is set to 'Performance '. If the current clock speed is roughly 800 MHz (1.7 GHZ), feel Temp 0 is between 35 and 40 ° C / 95-105 ° F and the Temp sense 1 = 50-60 ° C / 120-140 ° F.

  Michael

  Seems a bit high for such a machine... have you ever cleaned the cooling system of your laptop?

  Could be the fan and cooling impeller is clobbed with the dust that causes these high temperatures. I suggest you to go for an electronic market, take a can with compressed air and clean with compressed air as the cooling system of dust and all that lives inside your machine. :)

  Please check after cleaning if the temp rise again.

  Welcome them

• Satellite A350D - too high temperature of the processor

  Hello guys.

  My laptop CPU temperature is too high. I have Windows 7 Ultimate 64 - bit edition. And the temperature at idle is ~ 70, she raises up to 98 C when loading the system. It happens only with 64-bit OS. 32-bit Windows idle temperature is ~ 40-50 ° C.
  I have the model A350D PSAKCE.

  Any ideas?

  Hello

  There is a new version of 64-bit BIOS.
  In your case, I recommend to check the version of the BIOS.
  If you still use an older version of BIOS (perhaps 32 bits), then you need to update it to the latest version of BIOS 64-bit.

  Good luck

• The Lenovo G50 80 screen too high contrast. How to solve this problem?

  I bought a Lenovo 50 80 g (it's under warranty). I'm having this problem with contrast/brightness of the built-in display. It is that it is too high (unacceptable), it is not natural and I can not yet able to fix is a problem or software drivers for hardware? Please guide me how to solve this problem.

  I think I've fixed this by right click on the desktop and choose Properties Intel graphics from there I went to the power Option and (in the menu dropdown) chosen on doughy and disabled Disable Power Saving Technology

  PS: in addition to this I adjusted also in contrast to 45 in the color settings.

• PSC 1315 all-in-One with Windows 7 (64), SP1, prints too high on the page.

  My printer prints too high on the page. Regardless of the printer or document settings, the first line prints at the top of the page. This problem is not present with Notepad, but appears with WordPad and Open Office Writer. How can I pay for this investment?

  Response to Shane_R:

  I spoke too soon. I think that I was not successfully download these drivers because I received messages that the original driver has not been installed. (Don't know why it worked once.)

  In any case, I found an old link to the HP site for my all-in-one model that provided a full hybrid software and driver download makeover. I installed it correctly and so far everything works better than before. Thanks for me toward the pilots initially.

  It comes to seventh year of my printer and second course of youth. Now maybe he'll go another seven.

• Power is too high

  Hello

  Model: Hp Pavilion DV6

  When I plug the charger to the laptop, the power is too high and when I remove the charger power is low, please me advice.

  Osama S

  Ok.

  Go to the control panel and select power options.

  

  This is where you can choose when the screen of the laptop turns off. It is located to do so to give you more laptop works when it is on battery power.

  Best regards
  ERICO

• Why minimize a window reduce RAM usage in an exe?

  I've noticed this since LV8.5 (I am currently using LV2010 with IMAQ 4.5), that whenever I reduce my exe, the use of the RAM in the Task Manager Windows decreases considerably.  My exe charge and discharge lots of images and the RAM usage goes up to about 500 MB for the exe file.  As soon as I reduce the window of the exe, it falls to about 13 MB.

  Can someone explain why this is happening?

  Thank you

  Bruce

  It is very likely that when you reduce your application, Windows decided to the page the largest part of this memory to disk, because the application is probably not used actively. Therefore, Windows decides to recover the memory for other applications.

  You can test this by showing the column virtual memory in Windows Task Manager. There, you see all of the paged memory that your application uses. Your application always uses the same amount of memory, but Windows can store in the virtual memory on your hard drive until it takes again.