My battery died after 1 hour when he was supposed to last 5 hours.

Similar Questions

• Battery dying after 50 hours standby

  Bought a new KRZR on Amazon in July. Have not used much at all yet, but use it very very soon. I am concerned about the battery life because when I charge the battery loses charge very quickly (after about 50 hours) not used at all. It seems therefore that I should get a new battery before moving to California and you will need to use the phone a LOT.

  But, looking at the pages of Motorola, it seems that they don't offer a replacement for the KRZR K1 batteries. Where, then, should I buy a new battery I can depend on?

  I found it on their Web site. I just clicked on accessories (Batteries and doors) and then clicked on refinement: "by the phone model", then choose KRZR.

  BC50

  I meant old phone in two ways. First of all that the phone was initially introduced earlier. Maybe in 2006 or 2007. Secondly the phone may have been made many years ago and then it's in their inventory. Who knows, they might even do the phone.

  What about the battery life. You have an active SIM card in the phone now, or is this a unregistered SIM card?  I think that it to be he would look to a tower. If the signal is poor the phone research, research and research of a signal. This will deplete the battery life faster. In the same way. With Bluetooth being active it will seek recently paired devices. Or if you're actively using Bluetooth it will expend energy during communication.  With regard to the citations for the 'specifications' most companies do care laboratory. Which means that conditions are ideal. Very few people live in a laboratory. I have to start somewhere right? Basically, I guess as it's the best I can get. Point raised.

  ~ SnappyD

• new battery 0% after 10 hours of "load".

  Hey guys,.

  After coming back from vacation, I found my laptop x201i 3 weeks totally discharged. I have pluged it overnight adapter (ntbk turned off) and found in the same condition in the morning.

  Know it: "battery was completely discharged and must be charged. "Do take 10 hours or more.

  States power management tools >

  Battery status: GOOD

  status: recharge

  remaining percentage: 0%

  validation load time: -.

  remaining capacity: 0 Wh

  full load: 57,54 Wh

  Current situation: 0.0 has

  Voltage: 8.4 V

  Wattage: -.

  30 c temp

  number of cycle 25

  etc.

  can you please tell me what to do next? Recover? Wait 10 more hours with operating system?

  Thank you

  M

  If, it does not load completely after 10 hours, so you may need to get the battery exchanged under warranty.

  P.S. as a note of caution do not completely draining your battery, you must set the laptop to turn off automatically at the level of 5% battery. A deep discharge could kill the battery (which may be what is happening in your battery, in which case an externalb battery charger is necessary to revive the battery).

• Satellite A200 - battery empty after 2 hours

  My laptop SATELLITE A 200 - BJ runs exactly 2 hours when I'm on the plane "save energy" - then I have to download. Is it normal?

  I bought 1 month ago and I don't konow how :(
  Please help me, thx

  Hello

  Why would it not normal? I presume that you very well now that Vista uses more resources than Windows XP Home edition and it is logical that energy consumption is also higher than on Windows XP Home edition.

  To be honest the 2 hours is OK for this model of laptop. I have the Satellite A200-1CR and battery is also about 2 hours. Less than 2 hours, but sometimes it depends on notebook use.

• After SP 2 download my computer will not die after one hour

  before, I downloaded vist pak2 my computer turn off after about an hour of non-use.  Now it does not it stays on all the time.

  Have you checked your sleep/Hibernation settings?

  Changed to a shorter time to see if they work at all?

• My BB Torch for blackBerry Smartphones is a disaster, every day that it's even worse, today the battery died after half a day...

  Why carry a phone is to call

  a Smartphone to have also contacts, calendar and the possibility to take the multiplication with some basic info and a few basic of internet access applications

  According to the data leaves a Torch 9800 should do everything that

  and it does so in time the battery lasts, but diwews of the battery during the night or the day more or less independent form the work you do.

  I removed in the meantime nearly all of the Apps I have installed over time...  I reduced backgorund light etc.

  I followed the advice of the internt vaissaille spoending money for a bberry Holster in order to have this function of sleep famos...

  and it does not work, I am now at the poin that I'll get alternative devices if I do not get a link to a site of RIM bberry serious real valuable information, or promise to give me a SW update or something like that. To my knowledge, it's the OS and not the applications... (which anyway menawhile are remoived...

  RIM, do you listen?

  a frustrated user back from a void in me device...

  dwonloading currently now from here:

  http://swdownloads.BlackBerry.com/downloads/contactFormPreload.do?code=02A32AD2669E6FE298E607FE7CC0E...

  Oh by the way but maybe I discuss in a stream of seven. : I can't calendar weeks for work...

  Tom

• Battery Drain after replacement phone has received

  My original DroidX one morning not illuminate. Verizon succeeded him and sending renovated right X.

  The day I got it my original battery would not charge the phone. Guaranteed Verizon my BHX6 battery (extended).

  Full charge this morning. Unplugged at 07:00. Do not use but to make a few short calls and a bit of text. In 3 hours, yellow battery level. Also does not seem to charge with Verizon car charger. 2.3.3 running on this new phone. Software nice up grade visually, but not if it's going to cause a battery problem. Hope you find a solution before work on Monday morning.

  My other phone had 2.1... I think, can remember, but had no problem with her battery. I thought 2.3.3 was supposed to be better with battery management. Once again, very nice Visual upgrade 2.3.3.

  This is the error of the operator. ? Do not do something different with this other than load Titanium Pro Back up phone, paid version today. Had that on this subject yesterday. But even with rear Aroid battery problem was always a problem.

  I hope that there is a difficulty, or hoping that there is an error of management on my part.

  You can check {using the battery - battery & Data Manager - settings} to see if you have a runaway app or process of power supply. Usually, the display is pork of the battery, if there is an application anywhere near the top while maybe the problem.

• When you try to FolderLink via Box, I get a confirmation message that the file is downloaded, but nothing happens and after an hour it is still downloading.

  When you try to FolderLink via Box, I get a confirmation message that downloads the file weeding, but the boy until the wheel turns and turns and after an hour or two it is still downloading. At this point I give up. I can download OK directly to their Web site box. He used to work a few months ago. I'm on Thunderbird V 38.2.0

  Instead, you can use Dropbox as FolderLink provider.
  Install this add-on.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/dropbox-for-FileLink/

• Qosmio X 300-158 battery drain after 8 ~ 12 hours off

  Hello.. :)

  I have a Toshiba Qosmio X 300-158. I just 3 months. I noticed that, after I turn on the laptop the second day, I think that the battery is up to 96 ~ 97%. Usually, I unplug the power cord from the laptop. I also unplug all devices when it is unplugged and off. I don't know why this is happening.

  My history of the battery, most of the time when I start to charge the battery, it's about 40 ~ 60% rename. It was just once when he was completely drained. I know it was bad :(

  Any help or advice?

  Thanks :)

  Hello

  Don t be to worry about this. It of normal that the battery will discharge between 2 and 4% of the battery for a rear stop/switch on the cycle. In addition, the battery recalibrates whenever it returns stop of sate.
  Alternative you can remove the battery and only works on AC/DC adapter.

  By the way: perhaps this document might be interesting: http://aps2.toshiba-tro.de/kb0/HTD9401AZ0001R01.htm

• Laptop battery drains to 10%/hour when to stop.

  Hello

  I have a Lenovo IdeaPad Y400

  Intel i7-3630QM 2.4 GHz

  8 GB RAM

  1 TB HARD DRIVE

  nVidia Geforce GT 650 M

  64-bit Windows 8

  This is the first laptop I have (I've always been using desktop computers) and I first noticed that leave my laptop in standby drain the battery to 10%/hour, so I decided to let him hibernate instead. Same thing happens, the battery drains to 10%/hour, so I try to stop... Same thing happens, battery drains to 10%/hour. So I removed the battery waited several hours, he plugged back in and noticed that he do NOT drain in any significant quantity. All this happens when the laptop is not reloaded also. Any help would be appreciated!

  I found a solution to the problem. All I had to do was disable quick start settings in power options. Now, there is no noticeable drain when the laptop is turned off!

• for some reason when I log in it will say blocking down, but it dose not after an hour, it is now more than 30 days

  for some reason any when I connect it says blocking down but it dose not after an hour I would push the bar on or pull off the Gack DC it's been driving me crazy

  Hello

  ·         What operating system do you use?

   

  Method 1:

  I suggest you perform the clean boot and check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135/en-us

  Note: Don't forget to start your machine in normal mode by following step 7 of the link.

   

   

  Method 2:

   

  If you are facing this problem in Windows XP, see this link:

  Advanced Troubleshooting for shutdown problems in Windows XP

  http://support.Microsoft.com/kb/308029

  Method 3:

  Refer to the Kb article and check.

  You can't do a computer that runs Windows 7 stops or sleep

  http://support.Microsoft.com/kb/977307

  Try to run the troubleshooter of performance and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 4:

  Also check the event viewer

  Event Viewer is a tool that displays detailed information about important events on your computer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• Motorcycle G died after letting the battery die

  I'm having a strange problem with my motorcycle G. I have let the battery choke, which I begin to gather was a bad thing, and when I try to load the LED stays on and nothing seems to happen. I leave without charge for 2 days and then tried to charge for 24 hours, but the phone still turn. I tried a few suggestions as hold the FLIGHT down and the power button for 2 minutes and just hold the power button, but nothing seems to work. I get no response from the phone what so ever, no screen flash nothing.

  Any suggestions or is my bread of battery?

  Thank you

  Please see Post of Matt.

  Double wire closure.

  Mark

  Forums Manager

• laptop keeps cutting off after 1 hour. new battery installed

  laptop keeps cutting off after 1 hour.  new battery installed why this phenomenon occur?

  Have you checked your Power Options settings?

  The following article is maybe worth a visit:

  Adjust Windows XP Power Options
  http://www.lancelhoff.com/adjust-Windows-XP-power-options/

  A Google search for power management / Power Options
  will provide more information.

• When you use your hard disk defragmentation process starts but seems stuck and won't end evn after several hours. How I can remidy this?

  When you use "Defragment your hard drive" the process starts but seems stuck and won't end evn after several hours.  How I can remidy this? I was already able to defragment successfully.

  Hello

  How do you know that never, it ends when there is no GUI on Vista for Defrag?

  in vista, the defragmentation process works silently in the background

  Unfortunately in vista it does not provide a GUI to show progress as it did in xp

  to do this, you'll need 3rd party defrag programs

  read the comments on these FREE below defragmentation programs and choose the one that you prefer to use

  http://www.SnapFiles.com/get/adiskdefrag.html

  Auslogics Disk Defrag is a disk defragmentation tool that supports FAT 16, FAT 32, and NTFS volumes. It defragments supply with demand automatic defrags when your system is idle and advanced options to customize the files that will be défragmentées.

  http://www.SnapFiles.com/get/UltraDefrag.html

  UltraDefrag is an Open Source disk defragmentation tool that offers a quick Defrag, using a pilot based on the kernel. It offers a simple with a cluster map display graphical user interface, as well as command line interface and scheduling option

  http://www.SnapFiles.com/get/puranfree.html

  Puran Defrag is a Disk Defragmenter easy to use which offers start defragmentation, automatic defragmentation, intelligent directory optimization, background (low priority) operation and optimization of free space. Other features include integrated planning, automatic reboot or shutdown after defragmentation and integration with Windows Explorer to defragment individual files from the context menu. The free version is identical in functionality to the standard version (shareware), but it is limited to a private, non commercial use

  http://www.SnapFiles.com/get/iobitsmartdefrag.html

  Smart Defrag is a Disk Defragmenter automatically keeps your hard disk space does not become too defragemented, which may cause slower disk performance. It works continuously in the background while your computer is idle and requires no further user for basic maintenance intervention. The program also includes an option of manual defragmentation as well as support for the regular defrags and with optional file system optimization.

• BlackBerry Q10 after upgrade to 10.2.0.424 - battery recharging takes 24 hours and pay less than 2!

  I was surprised to see another post saying that the improved battery performance after the upgrade to 10.2.0.424...

  Two days ago, I have updated more wireless to the latest version 10.2.0.424 and since then:

  1 a battery takes 24 hours (and sometimes charges the same totally!),

  2. discharge takes a couple of hours,

  3 - battery heating more than before

  4 - blackbackground BBM that makes unreadable

  For reference - I had none of these problems before the upgrade, and I have not installed anything since

  Nobody witnessed this problem? How can I downgrade to the previous version?

  Thank you

  Try a few reboots. maybe also try - as I read on different post - press volume up and volume keys down simultaneously for 20 seconds (ignore his screenshot): he's going to perform a reboot too.

  After I had updated to 10.2 my battery was also drain more quickly (but not as yours), however a few reboots, complete a few refills and now it's even better than before.