new battery 0% after 10 hours of "load".

Similar Questions

• BlackBerry Smartphones new battery with Red Cross, do not load

  Bought my 2 "BOLD" one year back. Just bought a new battery for my Bold 2 (9700) with a guarantee of 6 months like previous battery used to drain quickly. Tried to load, but it is a sign of the battery with a red cross on it even after charging it for 3 hours. When I use my old battery, it works well as before. What is the problem? Help, please.

  Hi drdash

  It sounds like you may have a defective battery.  I suggest you go back to the place of purchase for an Exchange if possible.

  Thank you

• Battery dying after 50 hours standby

  Bought a new KRZR on Amazon in July. Have not used much at all yet, but use it very very soon. I am concerned about the battery life because when I charge the battery loses charge very quickly (after about 50 hours) not used at all. It seems therefore that I should get a new battery before moving to California and you will need to use the phone a LOT.

  But, looking at the pages of Motorola, it seems that they don't offer a replacement for the KRZR K1 batteries. Where, then, should I buy a new battery I can depend on?

  I found it on their Web site. I just clicked on accessories (Batteries and doors) and then clicked on refinement: "by the phone model", then choose KRZR.

  BC50

  I meant old phone in two ways. First of all that the phone was initially introduced earlier. Maybe in 2006 or 2007. Secondly the phone may have been made many years ago and then it's in their inventory. Who knows, they might even do the phone.

  What about the battery life. You have an active SIM card in the phone now, or is this a unregistered SIM card?  I think that it to be he would look to a tower. If the signal is poor the phone research, research and research of a signal. This will deplete the battery life faster. In the same way. With Bluetooth being active it will seek recently paired devices. Or if you're actively using Bluetooth it will expend energy during communication.  With regard to the citations for the 'specifications' most companies do care laboratory. Which means that conditions are ideal. Very few people live in a laboratory. I have to start somewhere right? Basically, I guess as it's the best I can get. Point raised.

  ~ SnappyD

• new battery but computer still does not load

  I just bought a new battery and the computer will not charge it. It is said to replace the battery.

  Hello

  Check with the vendor Support from Dell, their documentation online, and battery diagnostics, drivers.
  and ask questions in the Dell forums about known issues. Some manufacturer issued BIOS and other updates
  for help with battery problems.

  -----------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =================================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how or)
  How long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have online forums.

  New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Taking care of your laptop battery
  http://Windows.Microsoft.com/en-us/Windows7/taking-care-of-your-laptop-battery

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  ============================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Satellite A200 - battery empty after 2 hours

  My laptop SATELLITE A 200 - BJ runs exactly 2 hours when I'm on the plane "save energy" - then I have to download. Is it normal?

  I bought 1 month ago and I don't konow how :(
  Please help me, thx

  Hello

  Why would it not normal? I presume that you very well now that Vista uses more resources than Windows XP Home edition and it is logical that energy consumption is also higher than on Windows XP Home edition.

  To be honest the 2 hours is OK for this model of laptop. I have the Satellite A200-1CR and battery is also about 2 hours. Less than 2 hours, but sometimes it depends on notebook use.

• HP Compaq Presario CQ61 - battery - new battery (icon shows 100% available, connected load)

  I replaced my laptop battery and the icon shows now available at 100% but connected load.

  Remove the cable from the laptop dies immediately.

  Have I done anything measured during the installation of the battery?

  Can you please check if your AC/adapter works normal by connecting to a different laptop

  OR

  Can you connect please an adapter of well-known power supply/AC of a different notebook with your laptop to check

  So we can troubleshoot

  Note: In case if you are unable to perform any of the actions mentioned above I highly recommend to immediately Contact HP Support by phone to get help without delay to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• My battery died after 1 hour when he was supposed to last 5 hours.

  just got a laptop 3 weeks ago and the batteries last about an hour, but it's suppose last 5 years

  original title: latop battery dies quickly

  ashaMR

  Contact the manufacturer for laptop support. They will give you instructions on the calibration of the battery to get the battery to last longer. It may even be in the owner's manual.

• After 6 hours to load my Apps, where are they? Do not see them in my Applications folder

  After that I downloaded applications, then install them? that will take more time.

  Check the status in the CC application and try again, if nothing is there. For anything beyond that, you will need to provide more information on your system, and more specifically what you were doing.

  Mylenium

• A satellite - new battery is flat when power off

  Hi all

  I have a new battery that the other was under warranty.

  When I stop and turn off the power to the computer, the battery seems to be running in the back ground as when I turn on the pc there are only about 3 percent of power in the battery.

  What are the correct settings, so I can stop and the battery does not get used?

  Thank you
  Jacquie

  Hey,.

  Really shut down you the computer, or it is in standby mode? No battery power is necessary if you turn off the computer or switch to hibernation mode. Standby battery power is required.

  In addition, you wrote that you have a new battery. How many times you load the already? A new battery must be charged at least 5 times to reach full capacity.

  If you have loaded the battery is battery LED color change?

• laptop keeps cutting off after 1 hour. new battery installed

  laptop keeps cutting off after 1 hour.  new battery installed why this phenomenon occur?

  Have you checked your Power Options settings?

  The following article is maybe worth a visit:

  Adjust Windows XP Power Options
  http://www.lancelhoff.com/adjust-Windows-XP-power-options/

  A Google search for power management / Power Options
  will provide more information.

• New battery for Satellite A40-S270 loads but does not work

  My Satellite A40-S270 battery (PA3287U-1BRS) is 4 years old and doesn't work for 2 hours, so I bought a new.
  From 2 different companies, they provide a PS2522U, 11.1V 8800 mAH, which is supposed to be compatible 100%.

  Fees from the battery to 100%, then when I pull the AC it closes... becomes black.
  It does NOT start on battery only. The green light flashes when I push the Start button, but that's all.

  I can put the old battery to charge fully, then it will unload fully (2 hours) then load and shoot HQ at any time and it continues to run.

  > My Satellite A40-S270 (PA3287U-1BRS) battery is 4 years old and works only 2 hrs
  The laptop can run with old battery 2 hours?
  Hey Buddy my laptop only tracks 1.50hours by using the battery power and the battery is not old and doesn't malfunction. There is nothing wrong with your old battery in my eyes.

  In addition, you should know that battery life depends on the use of the laptop battery would not last long if the laptop would be used with a maximum performance (using accuracy in car, CPU and CD/DVD display at 100%, etc.)

  Back to your question; I think that your batteries are not entirely compatible.
  You must take the same battery recommended by Toshiba.

• New battery problem - does not load.

  My first battery died after 3 years.  I bought a new one and it does not load.  Any ideas?

  Yes, the power button on the laptop.

  Is it a leader in the battery... it turns the laptop?

  If you hover over the battery icon it signals any charge?

  You can also try (including some report success with) a similar procedure to turn the PC off, remove the battery and power supply and then now button / stop for 20 to 30 seconds as before.

  Now, plug in current first and then insert the batteries.

  It's something I've never tried and for me is almost the same as "hot swapping" a battery although many report it resets a battery no load. Maybe research all first if your laptop supports 'Exchange hot' batteries.

• charge battery after installing the new battery does not exist

  I use Windows 7 Ultimate Spk1 32 bit on my laptop (big mistake)
  I recently installed a new battery & put it through the cycles of preparation 3 times following the instructions.
  The next time he went down to the alarm of low level newly together and I added the power adapter, nothing happened, the battery wouldn't charge.
  After many attempts to do nothing improved load, especially my temper.
  They advised me to install another battery which I just did, and this SECOND new battery just sits there & will not charge either.
  When he arrived he had 10% fresh rate showing so I removed the AC adapter and let him draw 8%, but when I replaced the adapter he had served on 8% & does not load.
  What is going on? How a simple thing like recharging simply disappears. ?
  Does anyone have a solution for this problem?

  See you soon
  Geoff

  The charging circuit inside the laptop and recharges the battery while the laptop is plugged into the mains. If the load circuit does not have the laptop is running on a charged battery or the power cable, but won't charge the battery.  The fact that the machine failed to load two new and old battery suggests the charging circuit has failed.

• PC Pavilion laptop: no sound on Pavilion g6 after installing the new battery CMOS

  I have a Pavilion g6z - 1 d 00 CTO Notebook PC, model A2F43AV number.  It came with Windows 7 Home Premium, and I upgraded the operating system to Windows 7 Pro (64 bit).

  The problem is that I did not sound, either through headphones or the speakers even if the Volume is set at 55. I first noticed the audio problem after replacing the CMOS battery, as the laptop is 4 years old and he gave me intermittent wireless connectivity problems.  After installing the new battery CMOS, I noticed the wireless driver was missing and downloaded/installed.  Everything was fine except the audio.  Then I reset the BIOS but nothing there as the BIOS version is v.49, and it is the most recent.

  I have also downloaded/installed the driver audio and rebooted the PC.  Still, there is no noise.

  Finally, I have checked the audio drivers and the reporting system they work without any problem.

  What should I do next?

  Thanks, Terry

  @Terry57

  Thanks for the reply,

  I was under the impression that these links would take you to guide step by step, however, it seems that they do not work,

  However, I have provided details below:

  To perform a hard reset on a computer equipped with a removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  5. Remove the battery from the compartment to batteries.

  6. Press and hold button power for about 15 seconds, remove any residual electric charge capacitors that protect memory.

  7. Insert the battery and plug the power adapter into the laptop, but do not connect peripheral devices.

  8. Press the power button to turn on the computer.

  9. If a boot menu appears, use the arrow keys to select start Windows normally and then press the Enter key.

  10. After you have reconnected each peripheral device, run Windows Update and HP Support Assistant to update all device drivers.

  To perform a hard reset on a computer equipped with a sealed or non-removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  To perform a system recovery, this link should work: click here

  Keep me posted for any technical assistance,

  Kind regards

• My new battery MacAir 13 hurtling in 4 hours. Should be closer to 11 hours. Any help?

  My new battery 13 MacAir is hurtling in 4 hours. It should be closer to 11 hours before sinking. Any advice?

  We have no way to deal with the material. Please make an appointment at the Apple Store - Genius Bar store and bring it into service. If you are in the United States or is unable to make an appointment in this way, contact your Apple store.