My calendar spontaneously abandoned some calendars

Similar Questions

• My computer takes 9 minutes to start when you turn on. Where can I find the system configuration to abandon some of the start up programs that I don't need.

  I said the reason that my computer takes 9 to 15 minutes to complete the commissioning is there are too many programs that start automatically when I turn it on. They said to click on start and type system configuration and deselect some of the programs to start automatically. I typed in the run dialogue box but nothing.  How do I know where to find it and can you tell me which ones I should NEVER disable? Thank you.

  You type: msconfig in the Run dialog box.

  Under the Startup tab disable this you never or rarely use.

  You will always be able to use them whenever you want without going back to msconfig.

  On the Services tab, click Hide all Microsoft Services, and then choose the ones you want to start when you start your computer.

• Release notes for Mac OS Sierra

  I have searched all over the Apple site and cannot find the release notes for Sierra.  I'm trying to find the official word of what are known issues with Aperture, thanks!

  Dudeman

  You can read about some of the issues of first-hand in the following link:

  Opening 3.6 will work in Mac OS Sierra?

  That said, I doubt that Apple could go to the trouble of listing issues with a product that they have abandoned some years ago and no longer support.

• need to sum all the sal

  My dear

  This query, I know sal sum in dept by job is

  I have to add new coumn in sum to give query for all dept

  and new line give sum for each Department

  as a matrix report

  WITH pivot_data AS (SELECT deptno, job, sal FROM emp)

  SELECT "JOB."

  "10."

  "20."

  '30 ',.

  "40".

  OF pivot_data PIVOT (SUM (sal)

  FOR deptno

  (10, 20, 30, 40)

  )

  Hello

  So, besides the total sal for each combination of deptno and job, you want also totals for each jdeptno (regardless of the job) and work (regardless of deptno) and a total general (no matter the deptno and employment).  This sounds like a job for the CUBE.  The following soLution uses the CUBE to calculate amounts and then uses the PIVOT just to combine lines.

  WITH all_jobs AS

  (

  SELECT DISTINCT job

  FROM scott.emp

  )

  data_to_pivot AS

  (

  SELECT deptno NVL (d.deptno, - 1)

  , NVL (j.job, 'ALL') AS job

  , NVL (SUM (e.sal), 0) AS sal

  GROUPING (j.job) AS job_agg

  OF scott.dept d

  CROSS JOIN all_jobs j

  LEFT OUTER JOIN scott.emp e ON e.deptno = d.deptno

  AND e.job = j.job

  GROUP BY CUBE (d.deptno, j.job)

  )

  Simply SELECT employment, '10', all_depts '20', '30', '40', - or everything *, if you don't mind saw job_agg

  OF data_to_pivot

  PIVOT (MIN (sal)

  TO deptno IN (10, 20, 30, 40

  All_depts AS-1

  )

  )

  ORDER BY job_agg

  work

  ;

  Output:

  ALL_DEPTS 10 20 30 40 JOB

  --------- ----- ----- ----- ----- ---------

  0 6000 0 0 6000 ANALYST

  1300 1900 950 0 4150 CLERK

  MANAGER OF 2450 2975 2850 0 8275

  THE PRESIDENT 5000 0 0 0 5000

  0 0 5600 0 5600 SELLER

  ALL THE 8750 10875 9400 0 29025

  Instead of deriving a "table" of all possible jobs, you should be able to use a partitioned outer join, something like this:

  WITH pivot_data AS

  (

  SELECT deptno NVL (d.deptno, - 1)

  , NVL (e.job, 'ALL') AS job

  , NVL (SUM (e.sal), 0) AS sal

  GROUPING (employment) AS job_agg

  OF scott.dept d

  LEFT OUTER JOIN scott.emp e PARTITION BY (e.job)

  ON e.deptno = d.deptno

  GROUP BY CUBE (e.job, d.deptno)

  )

  SELECT *.

  OF pivot_data

  PIVOT (MIN (sal)

  TO deptno IN (10, 20, 30, 40

  All_depts AS-1

  )

  )

  ORDER BY job_agg, job

  ;

  But the only effect of the outer join partitioned seems to cause CUBE to abandon some Super aggregates.  I do something ridiculous in this second request, or there is a bug in my version (11.2.0.2.0 Express).

  (Almost always, when people say "there must be a bug", they're just doing something stupid.)  There is no reason to think that I am an exception.  I don't have another version of Oracle at hand right now)

• How can I re - establish 12 items on the new computer

  I upgraded my old computer to Windows 10 and he abandoned some applications including 12 elements. I have the serial number, but can't find how to restore on my new machine.

  Any help will be appreciated.

  Hello Michael,

  because you have a serial number you can download here

  Or Download Adobe Premiere Elements 14, 10, 11, 12, 13

  https://helpx.Adobe.com/Photoshop-elements/KB/Photoshop-elements-downloads.html

  AND read before

  'Read before downloading Adobe Premiere Elements'

  or "Read before you download a Photoshop Elements product"

  Hans-Günter

• Graphics referenced can be converted for embedded graphics?

  If a graph is imported by reference, is there a way to change the chart to a chart embedded without having to remove and re - import?

  No direct method. You can try to click on the graph, and then file > import > file and FM, remembers the selected name. Just change the import option to to 'printed' and then click Replace.

  [However, it is a step backwards to the recommended way to deal with FM graphics, i.e. import by reference. [Your files will be really swell and FM is known to sometimes spontaneously forget some graphics, which will leave you with just a gray rectangle and no way of knowing what was called the original import file.]

• Replacement card mother XPS 730

  I've had problems with my 730 for a few years now. Initially, research told me that the power supply or capacitors were the cause. I bought a handful of replacement capacitors and took part, the system to replace the suggested guilty. The system has become very stable from there, but recently, the symptoms returned. The system crashes suddenly, keyboard and mouse are unresponsive, screen is frozen and sometimes a unique tone from the speakers. The only option is hard stop the start up. Sometimes, this can happen every few minutes last time once a week.

  I replaced the sticks 4x1Go with sticks of 2 x 4 GB Patriot memory and the video card abandoned some time back then I have an ATI Radeon HD5770.

  Recently, I replaced the original RAM but the gel has continued. When I replaced with the Patriot is frozen usually until I moved the second stick of the 2nd to the 3rd and then finally to the 4th slot. Now, it has been relatively stable.

  Could there be something wrong with the memory slots?

  I would do well to replace the motherboard with a new one? I found 4 on eBay for all about AUD100.

  If your system is a 730, you need a 730 motberboard. If it is a 730 x, you will need a motherboard 730 x. They are not interchangeable between the two systems because the x 730 uses RAM DDR3 vs DDR2 on the 730 and a core i series processor vs Core 2 series and has a different take. ThomasLG

  UU795, F642F, 0F642F, CN-0F642F

  These numbers above are motherboards OEM Dell XPS 730 and work with your desktop computer.

• Google Calendar becomes inactive in Firefox. Reset Firefox solves the problem for some time (sometimes minutes), then it becomes inactive.

  Google Calendar becomes inactive in Firefox. Can not navigate, cannot change the appointments, can only view an appointment, then freezes and nothing is more possible.
  Reset Firefox solves the problem for some time (sometimes minutes), then it becomes inactive.
  Firefox 28.0, Windows 7.
  Google Calendar is OK in Android and syncs with my PC OK.
  Works fine in Internet Explorer.
  Please notify.

  The extension Freeven pro is probably the problem. Only that disable and check again.

  If you have the same problem after having disabled the extension pro Freeven then, disable graphics hardware acceleration.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  In safe mode hardware, acceleration is disable by default.

  Thank you.

• Assistant (DTA) data transfer transferred some of my Contacts, none of my calendar or Memo files

  When I ran the DTA at 5:30 PM PST yesterday, he said he had picked up ~ 4100 chronogram (Palm Desktop 6.2), with the exception of 20 files of calendar, which was very good.
  
  On my old Palm device, he said I had ~ 1300 address book records, ~ 2000 Date record book and ~ 850 record Memo. So when the DTA said he had picked up ~ 4100 records, which seemed all right.
  
  When you are prompted on my pre, I chose to sync my data with Google.
  
  Immediately after this one-time transfer process, I checked my pre, and there is no record of my old Palm Desktop Contacts, calendar, or PRE memos. I thought that I should wait to see what happens.
  
  About 7:30 PM PST yesterday, slightly more than half of my Contacts has appeared in Google Contacts section 'My Contacts' (725 total) and on my pre. The same recordings were in Google Contacts and on my Palm Pre. Furthermore, none of my calendar or Memo files had been transferred more to my pre or Google (for the calendar).
  
  I thought that maybe the data transfer was still running, so I waited all night.
  
  Since this morning 9:45 AM PST, nothing has changed.
  
  My Pre and Google seem to have incomplete data:
  -slightly more than half of records from address book Palm Desktop 6.2 made to my pre / Google
  -any of the records in Palm Desktop 6.2 Agenda made my pre / Google
  -any of the records in Palm Desktop 6.2 memos made my pre / Google
  
  SUMMARY: I'm extremely frustrated. The only thing that I have always enjoyed with Palm devices has been the opportunity to upgrade to the new Palm devices and carry my existing data. The one-time transfer of DTA to pre process is very buggy. Somewhere after the DTA extracts data from my Palm Desktop (~ 4100 records), most of these documents have been lost. It is a horrible customer experience.

  I did some online research, and the author of the following article also fell on a similar problem:

  http://blog.Treonauts.com/2009/06/Palm-pre-sync-solutions.html

  I have tested and verified that when I create a new record on my pre calendar, he gets sync would correctly in Google Calendar and vice versa (new record created in Google Calendar sync does get would be my pre). It is very good for new data. But what of my thousands of existing data records? All these anniversaries, critical telephone numbers, addresses, etc.?

  Before this experience Pre DTA, I've that Palm had their pretty solid synchronization architecture, while the Apple iPhone synchronization architecture (via iTunes) was poor. But at least iPhone na not lose all records along the way.

  So I figured out how to get all my Contacts to load into my pre.

  Initially, I tried to transfer my data using DTA to Google instead of Palm profile. Several times I tried to run the DTA to transfer my contacts from Palm Desktop 6.2 to Google contacts. Whenever I tried to do, at some point, sync Google contacts folders would stop permanently, until all records have been transferred to the course. You can find out how many records have been sync'd to a given pre Contacts by clicking on Preferences & accounts by clicking on the account. You will see the number of contacts.

  So I decided to try to use the Palm profile as the storage for my Contacts and calendar, and all my Contact records (total 1372) was migrated successfully on the Meadow

  The pre now displays contact records in my pre Contacts as I expect: I see the files I transferred over my Palm Desktop. And because I added a Gmail contacts, Gmail addresses friends get "linked" to the corresponding Contacts automatically.

  Summary: my recommendation is that, for the DTA transfer process, you choose to store (backup) your Contacts (and calendar) on the Palm profile. Of course, the downside of this approach is data that has been created on your Pre will not be displayed in Google Contacts and Google Calendar. Of course, you can choose to add your Google accounts on your Pre to your Contacts and calendar, which is what I did. This makes the Chronogram of your Gmail contacts and introduce you to Google Calendar on your Pre. For example, I added the calendar we vacation on Google Calendar. And now these holiday appear on my Pre calendar.

  Message edited by edweirdo 08/06/2009 11:47

• I maintain a colorful monthly calendar for my daughter on which there is a little clip art. With El Capital can remove some of the clipart. How do I now insert/delete clip art to change every month?

  L0.11.3 El Capitan

  iMac

  Under El Capitan impossible to remove some of the clipart in a colorful monthly calendar I do for the daughter and change every month.

  How do I clear old clip art and new import?

  What application you use to create and maintain this calendar?

• I deleted some files in the My Documents folder and now I can't view my calendar, addresses, or e-mail etc in my email account

  A film, I use editing program saves hundreds of files in My Documents folder.  I felt that I needed to delete some of them after an editing session and did.  But when I went to see my email, all folders were empty and not visible.  I have two other email accounts that do not work in my default email is no emails in the calendar or address book or Inbox.  What file can I removed in the Documents that made this happen?

  Must adapt to the * address email is removed from the privacy *

  Hello

  According to the description, it seems that you are not able to view emails, addresses or the events of the calendar in the mail account.

  To guide you in the right direction, I need more computer information by answering the following questions:

  -Who is the provider of mail service?
  -Do you have any mail client installed on your computer? (Outlook or Windows Live Mail)
  -Editing are which program movie you referring?
  -You save all your emails in folders of documents?

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Calendar: Some screwed up day events

  I just noticed that some birthdays and public holdies any of the appropriate Google calendars last two days instead of one in my calendar from the front.

  They appear correctly in Google Calendar, however.

  Is this a known problem, and if so, is there a way to solve it? Easter last Sunday from Sunday to Monday is a little weird, I think that

  Not all entries are affected, it might be a problem with DST?

  Just, I deleted all of the Google-account of the calendar pre and re - he added. It seems that all events appear correctly now

• Palm Desktop 4.2 - text color coded calendar entries are hidden for some colors

  Environment:

  Treo 680

  Palm Desktop 4.2 running on Windows XP Pro

  Color calendar entries were works very well since I have my phone for over a year.  When I added a new category of color (for my total of 7 categories) I noticed that some of my calendar entries showed the bar color-coded for the appointment, but the text for the entry was hidden.  Nor was I able to change the entry to the Palm Desktop Help, given that any attempt to select the entrance to the tent to create a new entry.

  Thinking that I had exceeded a limit for the number of categories of colors that I deleted the new category (so the entries were now unclassified).  Now, all but one of my color categories are affected (bar colors for the appointment, but no visible text), including those marked with 'undefined' category

  The only color that now shows the text for calendar entries is my category by default (not long).  This affects all my existing and brand new calendar entries, I create, regardless of if I create them on the Treo or Palm Desktop use.

  If I press to scroll my appointments on the page, it selects only those for my default color category where the text of the entry is visible (i.e. He ignores all other appointments).

  Calendar entries are visible on my Treo, fortunately.

  I have not installed any new applications or updates.

  I have not been able to find anyone else reporting this issue.

  My next step will be to restore my backup from last week, but I was hoping to avoid that if possible, so any advice would be greatly appreciated.

  Thanks in advance!

  No worries. It will be under the main screen where you click Calendar. Not under a menu option. If you set it to all to view all of your appointments, no matter what category it is in.

  Message relates to: Palm Z22

• Why my clips/exit points have moved / "slips" in my calendar. Why some people have a zebra pattern?

  I try to open an existing in Prime CC 2015 project file that contains a final assembly locked for a video clip. When I open the project, it displays the correct cuts that were made, but all the clips seem to have substantially been moved as if someone used the tool to slide on videos. Each clip is cut to the song specifically and I'm sure it's the same source/clip file that is displayed, but they are simply passed and I noticed when I tried to export a XML to open to davinci Resolve for color, but then when I've seen this I came first and they were already screwed up. Now, I noticed that it didn't happen at the opening of the source of the original project folder car that I copied the above project file of. It opens up very well with the right of entrance/exit points on the original drive but not the folder copied on my personal drive (do not know if it matters or not). Clips have also this Zebra looking pattern on the bottom half of the clip on the timeline. The portions clips that are now "Zebra would be" do not appear on the video preview. (Essentially the sequence opens well, clips were not moved in time [time code is the same thing], but simply clips to the point now is earlier or later in the clip from the source which is basically as the tool to slide in first) Im not sure what is happening but lately first has also been crashing a lot on me today. He did not cooperate with regard to the loading of the images (kept showing yellow sign "Waiting Images" on the Preview Panel) I have not updated my OS recently but it seems that 2015 is not a reliable updated. But if someone could help me please correct the staggered/sliding clips in my calendar, perhaps more explain what means "part Zebra" on some clips? I am on a period in which this project is due to a contest in 2 days so any quick response would be much appreciated!

  I fixed it all! So, something I did not mention was that I'm working on a sequence of 24 p with several sequences of frame rate. The problem here is that footage has been interpreted to conform to the 24 frames per second. Now, when I copied the project file and sequences of original on my personal, normally first disk drive will wonder where the source files are gone. So you need to find the images in the new folder/location. This entire problem could have been avoided if I had ticked the ' preserve interpreted Footage ' box right next to "locate images. That ends up being the reason why the clips have been moved, simply because they were cut for idling and when read at full speed, the clip is seemed to have "evolved" or display a zebra striped pattern which means there was no more video to be displayed in the source file. Once footage has been interpreted to 24 fps, each matching item back to our final Assembly, we worked so hard! Sick leave this post here in case where someone else is not catch their error does not preserve that interpreted data images.

• HotSync Desktop 4.2 loses some (computer office on two different processors) calendar appointments

  I have my Palm Desktop on my laptop and desktop.  When I sync with my handheld I sometimes appointments of loss.  Why this might be happening?  The calendar on my desk is the main calendar.  But sometimes I do an entry on the handheld and then update the desk calendars.  I lost some important appointments because of this problem.  I would appreciate any input.

  You get messages when you lose data?

  Is - this particular to a single point synchronization? (IE when you synchronize at the office or when synchronize you with the laptop)

  What type of event you lose? (Laying again, unique, all day)

  Message relates to: None