hpConnectionManager

Similar Questions

• I get an error message that is related to "hpConnectionManager.exe".

  How can I remove this message so it will be neither appear whenever I turn on the laptop?

  original title: hpConnectionManager.exe

  Hello

  1. what operating system is installed on the computer?

  2 have you made any changes to the computer before the show?

  You can perform a clean boot to see if the problem persists. Check out the following link to do the same thing:

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 of the article mentioned above.

  Let us know if it helps!

• hpConnectionManager.exe cannot load the assembly

  Hello

  I use a laptop:

  ===============

  Model: HP Probook 4530 s

  Serial number: [edited by Moderator]

  Product number: XX982EA #ABF

  OS: Win 7 Pro 64-bit SP1

  And I get this message:

  ==================

  hpConnectionManager.exe

  Could not load the Assembly:

  CaslShared, Version = 3.5.1.1, Culture = neutral, PublicKey Token = 9c6f83d5b7f3d097

  This application will now exit.

  ==================

  I like this message disappears and I want to solve the problem.

  Could you please help me.

  Nicolas.

  Hi Nicolas,.

  Try the following.

  Open windows control panel, open programs and feature, do a right click the entry for the HP connection manager and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and reinstall HP Software Framework on the following link.

  As part of the HP software.

  When finished, restart the computer and then download and install HP Connection Manager from the link below.

  HP connection manager.

  Kind regards

  DP - K

• Receive the error a system startup - hpConnectionManager.exe

  Running Windows 7.

  hpConnectionManager.exe

  Could not load the Assembly:

  Ststem.Data.SQLite, Version =, Culture = neutral,

  PublicKeyToken = db937...

  The application will now exit.

  Thank you once again, David

  Your last suggestion does not work either.   I'll work around the issue for the moment, I appeciate your help

  Jeffw169

• -HPConnectionManager.exe - fatal error-

  HP Manager is on the fritz. How is it important and how to fix the error?

  ---------------------------
  HPConnectionManager.exe - fatal error
  ---------------------------
  HP Connection Manager service has stopped responding. Quit and restart the application.

  A fatal error occurred, check the HP connection manager in the event viewer for more details.

  Recovery of the class factory COM for component with CLSID {24DB46C8-C842-4E91-9AC4-8A9525A5551D} failed due to the following error: 80080005.
  ---------------------------
  Ok
  ---------------------------

  aondolumun wrote:
  I did, but it did not work. Yes, I connect.wireless most of the time by bluetooth Yes I.guess I.need and.transfer.files it. I have reinstalled.from the ery reco same.error msg Manager.

  You need not HPConnection Manager to make these connections. You can uninstall it without having to reinstall.

  The function of HPConnection Manager is to make it easier to establish links for people who have trouble getting wireless or bluetoothconnections.

  If you know how to pair with bluetooth, perform file transfers and have no problem with establishing a wireless connection on your own, then you can uninstall it.

  Kind regards

  ERICO

• hpConnectionManager.exe could not load the Assembly

  Hello. Before I'm begins, here are some of my features.

  Product name: HP ProBook 450 G1

  Product number: G4T52UT #ABA

  Windows 7 Professional 64-bit Service Pack 1

  Don't know what else you need, but I'm willing to give it.

  Also, whenever I boot from a complete stop, I get this lovely error after a minute or two:

  

  So little, can I tell yoou departure:

  1: I customized the appearance of my Windows 7 environment.

  I used this site to get my theme and here for icons. I made sure that I have Windows 7 and not 8, so it should be good.

  (Login screen and the start screen have been changed also, but that was after the problem started occurring.)

  2: I remember trying to install the theme differently at first and then having to return because of a few cosmetic errors system restore, but I forgot my original method (which is what I think has created this problem, but I don't know).

  3: when I press fn + esc to attempt to access information from the HP System I get a similar error (see below) which, at the end, also closes the sys info box.

  

  4: I fixed the .NET framework and software framework HP twice, without success.

  Everything else works great.

  Even if it is not a problem of high priority (and is probably my fault for messing around) I appreciate any help you have to offer.

  Thanks again.

  Thanks for the information. Recently, I had to completely re - install windows and lost all my data (completely different pattern but it's nothing - could someone helped me with), but got things very well again, no more than troubled market. I appreciate your time. Go ahead and lock or delete this thread.

• HP connection manager: Fatal Error, HP Connection Manager Service has stopped responding.

  Hey there,

  I have a very big problem with HP Connection Manager 4 on several Windows 7 laptops. The program is installed on about 250 laptop computers and some of them drive me crazy. Everything was fine until some point (I'm not quite sure, that could be after the installation of SP1, Win7), the connection manager has decided to stop working on some machines. Whenever I try to start it, it takes a long time to load until the following message is displayed:

  "HPConnectionManager.exe - fatal error '.

  HP Connection Manager service has stopped responding. Quit and restart the application.

  A fatal error occurred, check the HP connection manager in the event viewer for more details.

  Recovery of the factor of COM class for the component with CLSID {24DB46C8-C842-4E91-9AC4-8A9525A5551D} failed due to the following error 80080005. »

  I tried the following on one of these books:

  -Start the service manually: "Error 1067: the process terminated unexpectedly."

  -Msconfig: Removed any connection associated with Autostart Manager

  -Reinstall the HP connection manager

  -Repair HP Connection Manager

  -Reinstall .NET 3.5

  -Changed some regkeys

  -Install Microsoft Hotfix KB2519740 which is part of the system essential updates for Microsoft Windows 7 (that I can't download because there is a server error)

  More information:

  -(pour la plupart) HP Probook 6550 b

  -Windows 7 Enterprise 64-bit, SP1 (English and German MUI)

  -HP 4.1.22.1 Connection Manager

  The only thing that really works is to reinstall the laptop with the image with which we install all of them. HP connection manager is installed as a software later so I don't understand why a reinstall is successful.

  I'm really tired of this problem, and I have a few unhappy customers on my back, so if you have any suggestions for me, please help.

  Thanks in advance!

  You could try this on one machine that shows the issue and see if it helps:

  Relevant information:

  V4.4.10.1 Connection Manager

  Corrections in sp58930:
  -Fixes an issue where the setting of HP Connection Manager protocol PAP (Password Authentication) in the connection profile for Verizon LTE systems causes an authentication failure of network systems in some markets.
  -Fixes an issue where HP Connection Manager is not displayed in the configuration of the HP software.
  -Fixes an issue where event viewer displays an error in the HP Connection Manager once the system is restarted.
  -Fixes an issue where the HP Connection Manager displays the error message "SIM card is locked" when a PIN has been used successfully to unlock the SIM card.
  -Fixes an issue where the "Enter PUK" (Personal Unblocking Code) button does not appear in the HP connection manager when a SIM has been locked after the PIN code has been entered incorrectly.
  -Fixes an issue where the statutes of the wireless LAN and Bluetooth device not display correctly on the HP connection manager when Connection Manager is started while the wireless LAN and Bluetooth are turned on and connected.
  -Fixes an intermittent issue where network technology is incorrectly identified.
  -Fixes a problem that causes a HP connection manager to stop working and an error message is displayed.
  -Fixes an issue with the Spanish version.

  Prerequisites:
  • HP or Compaq machines only brand
  • Operating system is Windows XP or later
  • If the operating system is Windows XP, it must have installed SP3
  • Version of the .net framework 3.5 SP1 must be installed

  Improvements:
  -Supervises HP Support version 4.6.8.1

  Installation package:

  sp58930 Connection Manager V4.4.10.1

  =====================================================================================

  Hope that helps...

• Help conflict error ProBook 4730 s

  I have a Probook 4730 of s with Windows 7. I keep getting the following error after the computer starts-

  hpConnectionManager.exe

  Could not load the Assembly:

  System.Data.SQLite, Version = 1.0.61.0, Culture = neutral,

  PublicKeyTolken = db937bcd44ff139

  The application will now exit.

  It does not have a negative impact, but it is annoying getting this every time you start. Thanks for any advice on how to solve this problem.

  Click programs and features, and find and uninstall the HP Connection Manager software.

  This should stop the message from happening. If you need the software to make your wireless internet connection, you can download the latest version of your laptop support portal and reinstall.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060895&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_131508_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Use high CPU (35% average) while System Idle process CPU about 98% but frustrated by "[name of the prog] has stopped working".

  Hello

  I am trying to help someone with a laptop HP model g6-1202sa (Windows 7 Home Premium 64 - bit, another record at the end of the post).

  I think that Windows is now updated and drivers, but the problem remains also.

  The laptop has the symptoms mentioned in the title I found the Manager tasks.  Laptop fan is on a large part of the time, and the owner says that, during the execution of something more intensive than Skype for example of internet browsing, they get a warning from Norton on high CPU. Resource monitor shows that system interrupts are on average about 31% CPU.

  The results, I found the task manager has led to some research on Google, which in turn led me to want to run adksetup.exe (Windows Assessment and Deployment Kit) in the hope of discovering if a particular driver is causing the problem. (Various threads on the internet point to what is the way to go).

  However, after downloading adksetup.exe, when I try to launch it I get the initial screen of Toolbox and then 'assessment of Windows and the deployment for Windows 8.1 Kit has stopped working ". (Verification of the solution finally gives the only option to "Close the program").  Similarly, I have now discovered that if I try to look at the properties of the computer, i.e. start > right click on computer > left click on properties, I get "Windows Explorer has stopped working". Do more research on Google I find sometimes I get "Internet Explorer has stopped working" sometimes (Chrome is ok).  More out of curiosity than anything specific I ran AMD VISION Engine Control Center after right click on the desktop and ended with 'Catalyst Control Center; The host Application has stopped working".

  So before going any further, does anyone have any ideas what's happening?   I do not understand the problems 'has stopped working"in safe mode, but the high utilization of the processor with System Idle Process around 98% is still there.  It appears so that I can run adksetup.exe in safe mode while this would be the way to proceed and continue to try to tackle the problem of CPU?

  For the record, some of the things I've done along the way include update of Windows, updating drivers, running the file system (no violation of integrity) checker, a regular chkdsk ("CHKDSK discovered free space marked allocated in the master file table (MFT) bitmap. Correcting errors in the volume bitmap. Windows has made corrections to the file system").  Swapped the only module memory 4GB 2 x 1 GB modules I had to hang out, all the symptoms remained 4 GB then reinstalled.

  Thanks for the tips

  HP g6-1202sa Windows 7 Home Premium 64-bit

  4 GB of ram

  AMD A4 - 3300M APU with graphics Radeon (TM) HD 1900 MHz

  523 GB of free disk space

  WE

  Since the observer event logs, these are some of the problems

  Software connection of 1 hp mgr is damaged and needs to be installed.  There are literally hundreds (or even thousands of these errors)

  Cannot find the description for the ID of the event source hpCMSrv 5. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  The failing application name: hpConnectionManager.exe, version: 4.1.23.1, time stamp: 0x4df7dbef

  2 - the description for event ID 0 in source AdvancedSystemCareService8 is not found. Remove

  3 - Media center is corrupt (updated)

  The description for event ID 0 in source MCUpdate is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted.

  Workouts 4 - sky are corupt

  Session "SkyDriveSessionName" was able to start with the following error: 0xC0000022

  5 - the description for the ID of the event source BtFilter 26 is not found

  6 - hundreds of Cvhsvc.exe is a part of the virtualization Client Microsoft Microsoft Office Service... Errors

  The description for event ID 100 from source CVHSVC is not found.

  7. the description of event ID 3057 source client Application Virtualization Client cannot be found.

  As you can see there are at least a dozen of them which are probably related to the high utilization of the processor.

  The drivers are not updated (Bet you checked in the Manager device or with a sweeper driver as app)

  To be honest I don't see how SFC returned no breach of integrity account required to this type of problems.

  It might just be easier to re - install win 7, but I'm happy to help anyway