My Canon MX700 has suddenly stopped printing unless I turn it on and turn it on again each time. I use a new Windows 7

Similar Questions

• HP Photosmart 5510e printer has suddenly stopped printing correctly

  Original title: fault printer

  Hello

  I have a HP Photosmart 5510e printer that has suddenly stopped printing correctly because the black ink is not getting through.  I did everything possible troubleshooting I can and replaced all the cartridges for new ones, but nothing helped.  When I did a report print quality he had no black ink on it at all. This leads me to think that there may be a blockage between the cartridge and print head. Any ideas?

  You might want to try this: failure of black ink Photosmart 5510 e-All in one series

  Using cartridges HP no also could cause this kind of problem.  Otherwise, it is usually a sign that the printhead is kaput, impossible to replace this printer print head if the printer is also kaput, on the garbage heap, it will!  That's how it is with printers, you can either pay in advance for a printer expensive hard and has lower cost of Ink/toner replacement or you can buy a cheap and pay through the nose for ink replacement and in a year or two to mix the printer all out with the trash.

  John

• Photosmart 5510 has suddenly stopped printing black

  I have a Photosmart 5510 new, which was working fine, then suddenly stopped printing black.  Replace the cartridge and still nothing.  Prints fine colour, but not black.  No error message, just jumps print anything in black.  Excluded bone by the attempt at analysis and still nothing.

  Yay! I'm happy now. I did the thing to chat online with technical support and that's what I got: on the front screen of the printer, press the arrow to the right, and you should see an icon "Setup." Press on that. Then press tools, then scroll down to "Clean print head." Press the key. When it's done it spits out a test page and voila! It now prints. I hope that this works for some of you all!

• MG5320 has suddenly stopped printing. Have cleaned nozzles several times, including a thorough cleaning.

  MG5320 will not be printed.  Nozzle check shows as cyan and magenta.  New cartridges, no error message.  Simply goes through the motions, and will not be printed.  Machine is only about a year...

  Hi maricota,.

  Perform deep cleaning did not get the nozzle test to print properly, it is recommended that you contact the direct technical assistance. There is NO charge for this call. Information in real-time to a technical assistance call live would be very beneficial in this case.

  Please call 1-866-261-9362, Monday - Friday 10:00-10: 00 ET (excluding holidays). A Canon technical support representative will be able to solve this problem more quickly.

• HP 5530 e printer: my 5530 has suddenly stopped printing.

  My e-5530 not printed. The connectors are properly connected. Blu-tooth is running. I have the e-mail address of HP. The printer worked fine before.

  Thank you

  Hello AnnieRooney65,

  I want to offer a helping hand with the printing problem, that you have with the 5530 LIKE. You are unable to print, by means of printing, or you cannot print from the computer too? You have errors or blinking lights on the printer? Running the HP print and Scan Doctor can help us to determine what is happening, whether it's a hardware problem, driver problem.

  Start printing and scanning Dr. choose USB connection or wireless (based on the current connection) and allow to know the results.

  Hope to hear,

• My HP Office Jet 6700 Premium has suddenly stopped printing from my iPad

  I have a new HP Office Jet 6700 Premium

  It worked very well, wireless printing from my iPad.

  iPad displays a window that recognizes the printer, but it does not print.

  There is no error message.

  The steps below a usually resolve the problem you are experiencing:

  1. turn off the printer.

  2. completely turn off iOS devices (hold sleep and home buttons simultaneously until a message appears prompting you to "Slide to power off". Drag on this bar, and it should completely turned off).

  3. turn the printer on.

  4. switch on the devices iOS back.

  5 try printing again.

  These steps usually fix the problem. If they don't, try these additional steps:

  6. power cycle your router (usually done by unplugging the power cord from the router, wait 20 seconds and in him plugging back in).

  7. ensure that iOS devices and the printer are connected to the same network, and then try to print.

• 6500 has suddenly stopped printing black - half full cartridge - even with 2 computers

  HP Office Jet 6500An running under Apple's OSX was OK, the next day asked to print (black only) and print completely white sheet.  Ink cartridge shows more than half full and seems OK. prints other colors without problems.  Situation is the same when you use another computer OSX. Have removed and replaced the same cartridge and have disconnected and reconnected the power.  Out of warranty (I think) and not worth hassle of maintenance.   Ideas - or replace?

  I would like to look at this document here. It deals with bad print quality for your printer model and offers some troubleshooting steps you can take to correct the problem. It will perform various tasks and provide instructions step by step for all the actions that must be performed to try to correct this problem of printing output. I hope this helps.

• For some reason any my iphone 6 has suddenly stopped to reduce emails, they are just sitting in the waiting area, I'm running on iOS 9.3.1 can anyone help.

  For some reason any my iphone 6 has suddenly stopped to reduce emails, they are just sitting in the waiting area, I'm running on iOS 9.3.1 can anyone help.

  Hello. Try a few troubleshooting steps here: get help with Mail on iPhone, iPad and iPod touch - Apple Support

• iBooks has suddenly stopped sync between my iPhone and iPad

  iBooks has suddenly stopped syncing between my 6s iPhone and iPad Mini.  Both are running iOS 9.3, and the sync was working well for several days after I updated the two devices.  The two options of synchronization (bookmarks/notes and collections) are enabled for both devices.  And no matter on which device I add a bookmark or a note. It will not synchronize with the other device.

  I rebooted both devices and enabled the synchronization options, and then on again, but I was not able to run.

  Any ideas as to what is happening?

  Thank you.

  I'm having the same problem. I have iBooks on my iPhone, iPad and Mac and I cannot get any of them to Favorites sync. However, purchases are synchronized.

• keyboard has suddenly stopped working

  Hi all, my keyboard has suddenly stopped working. I was installing an upgrade of El Capitan (later) and when the computer is restarted, it gave me this message that the bluetooth keyboard was not detectable. Well, I don't have an external keyboard, just the Interior came with the laptop. I have reset the pram and it still does not work. I looked at the system preferences and beach seems to be in check. Is it time to this service or do I still have options?

  Thank you

  Nadia

  Try resetting the SMC http://support.apple.com/kb/ht3964

• Tecra S4 - sound card has suddenly stopped working

  Hello

  I have a Tecra laptop S4 and the sound card has suddenly stopped working... It ceased to operate as last month and then started working again... but now it no longer works

  I am a computer tech for 14 years now...

  I downloaded the drivers from the toshiba web site and the sound card still does not work...

  I did a restore on the Toshiba as well and the sound card still does not work...

  Problems with Tecra S series with defective sound cards?

  I also have a Tecra S2 Portable and map its sudenly stopped working but after a few days after is started working again... weird huh?

  Hello!

  Can you please explain what you mean that it s not working do not?
  The sound card is listed in the Device Manager?
  You have activated the sound using FN + ESC?
  What operating system do you use?

  In your case, I will try to update the BIOS. You can find it on the Toshiba site.
  Check it!

  Good bye

• 6457 - Lenovo T61p has suddenly stopped working!

  My Lenovo T61p 6457 has suddenly stopped working.

  When I turn it on I see the power and drive green lights HARD turns on and since another computer on my network I can access individual files on the hard drive the T61p.

  However when I connect the T61p via a VGA cable for an external monitor to work I don't see Windows or images on the screen!

  Do you think it is just a problem with the screen or is there something else?

  The screen currently installed on the T61p 6457 is WSXGA 1680 x 1050 (Samsung LTN154P2-LO5).

  I found a job WUXGA 1920 x 1200 with inverter and cable in the box of original case Lenovo T61p high - that will work in my T61p?

  
  

• My 12 year, Canoscan 8800f has suddenly stopped working.

  My 12 year, Canoscan 8800f has suddenly stopped working. When I press the power button that a light inside, but after a bit of whiring it turns off and the scanner goes off. Is there a solution or do I have to buy a new scanner?

  I'd still get a new.  They are not too expensive and they have added a lot of features such as instant on and LED light bulbs.

• Why my printer has suddenly started printing only the first three quarters of a page...?

  Why my printer has suddenly started printing only the first three quarters of a page...?

  Hello

  Thanks for posting the question in the Microsoft Community!

  If I understand correctly, you are facing problem with the printer of. I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.

  We start with two questions:

  1 have had any changes made on the computer before the show?

  2. What is the brand and model of the printer?

  I suggest for the link and try to run the troubleshooter and check if it helps.

  Printer in Windows problems

  If the problem is not resolved, please provide more information to help you best.

  Thank you.

• 6500 E709n: All-in-One has suddenly stopped working

  My printer suddenly stopped printing. In addition, don't copy or scan. I installed the new print cartridges, cleaned, heads unplugged and replugged, etc.. It is connected to the computer by a network, but I also tried USB cable.

  When I try to print or copy the leaves come out of the totally blank printer. But when I do a test of color, all the colors print correctly. When I try to scan to the office, the scanner shows the inage scanning but it does not appear on the desktop.

  It worked perfectly until today.

  Hi @donkaul,

  Welcome to the Forums of HP's Support. I understand that you are no longer able to print or scan. I would like to help.

  Have you tried to reset the printing system?

  Reset the printing system:

  1. Click on the Apple icon ( ), then click on System Preferences.