My computer boots to the a: drive

Similar Questions

• Computer tries to boot from the external drive

  I use a desktop computer with Windows 7.  I have an external hard drive connected as a backup drive.

  While booting, the computer tries to boot from the external drive and nothing happens.

  In order to get the machine to start, I have to unplug the drive hard Ext., which is a waste of time.

  I would like to back up on the drive internally the computer c:

  Is there a way I can stop trying to boot from the external drive?

  At the start of the pc, open the BIOS, usually output tab, search (priority boot device), set C: 1st, 2nd or 3rd external

  Save and exit. Also, more need of HDs to put in shape before using it, most come in a "raw" State the mfg

• Boot from the DVD drive on a compaq evo N610C

  Hello everyone, I try to start my computer from the CD/DVD with success.

  I use a win98 boot CD, is this OK? Or do I need another type of boot cd?

  I checked the CD on other computers, and there it works fine.

  Hoping for help

  P.S. This thread was moved from the business PCs - Compaq, Elite, Pro for PC - portable Omnibooks, EVO. -Forum moderator hp

  WL37 wrote:
  

  It's one of the problems, the bios, the parameter does not have the ability to boot from the CD/DVD.

  There are only three choices:

  start from laptop, multibay

  boot from the hard drive to laptop or computer ethernet startup.

  I also have uppdated the bios, but nothing changes.

  'Notebook multibay shoes' should work - the CD is installed in the multi-baies slot.

• Reinstall vista again HARD drive now PC don't can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop

  Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem

  Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?

  The DVD player worked before HARD drive went bad now, it won't work.

  And I just replaced the HARD drive, but now cannot load an operating system that he...

  Help, please...

  Hi dynamitenews

   

  1. are you able to boot to the desktop?
  2. what happens when you try to start the computer?

   

  You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.

  Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  If nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.
  
  BIOS WARNING-
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  I hope this helps.

• boot from the flash drive on a dimension 3000

  XPSP3, completely up to date, 3000 dell dimension

  I have booted from the flash drive once a long time ago and I have still now because my cd player is not good according to imgburn and dell did not buy, I looked. :)

  The only question about it in my search for this forum was 10 years ago, and the op had no satisfaction.

  I took action: drive startup laptop computer (dell), so that's good, will load files on the 3000 and then reach the point Windows starts up, and then I get a blue screen 07 b, any file in the list, just telling me to uninstall a driver or a controller, I have not installed one, :)

  any ideas?

  INSTALL full XP on USB flash as boot drive is not supported.

  Hirens is WINPE no full XP.  XP is not and is not supported as a boot USB and run all option.

  You need to do a real hard drive your boot drive.

• (Redirected) Cannot boot from the HARD drive on dell n5010 with SSD and HARD drive installed

  I have my old dell n5010 (15R Inspiron) with SSD (Samsung EVO 840 120 G) installed on the main drive Bay and the HDD (Samsung HJJ 500 G) on the optical drive Bay.

  It is a typical way to add an SSD on such an old laptop (bought from dell.com.cn in 2011).

  My Windows 10 operating system has been installed on the SSD using Samsung Data Migration software, so the previous C drive was pointless. So I formatted and installed an operating system Ubuntu 14.04 on it, hoping the grub OSs double beginning located on the HARD disk.

  However, I find no the Dell bios boot option to boot from the HARD drive installed in my optical drive Bay. All the choices are 'Hard Drive', 'Network' and 'Diagnostic '.

  But I was definitely sure that my bios program has detected the SSD and HDD with information on the main menu of the bios.

  And the LED on the optical drive Bay was immediately once I pressed the Start button on my laptop.

  As a general rule, all things were right except for options of the bios boot.

  Is there a way I can boot from HDD (with installed Ubuntu) while remaining has my SSD on the main drive Bay? I don't want to swap their positions, because the SSD is super fast on the main drive Bay.

  I have alse won't migrate 10 Windows to the HARD drive and reinstall Ubuntu on the SSD, because I'd like my windows be loaded quickly.

  Someone at - it the same problem with me?

  Any suggestion is appreciated!

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Tecra M2 - boot from the USB drive

  Hello
  Why Tecra M2 didn't boot from the USB drive in the BIOS?
  Is posible put in place this function in the new BIOS.

  Good bye

  Hello

  Good questions for Toshiba engineers.
  I don't think there is anything you can do about it. :(

• Boot from the 2nd drive HARD modular bay adapter (satellite P20)

  Hello

  I have a SP20-102 and I replaced the stock model with a 120 GB Seagate HDD and moved the original disc in a Module Bay HDD adapter.

  Is it possible to configure things so I can choose which HARD drive to boot from at the start, i.e. it is by default on the internal HARD drive but I can't choose to boot from the HARD drive in the modular Bay?

  I tried pressing F12 to boot device selection screen, but am unable to choose the 2nd HARD drive.

  Any ideas?

  R.

  Hello Robin

  As far as I know that it is not possible to boot from the external HARD drive. It is not supported.

  Good bye

• Satellite 5100 503: unable to boot from the CD drive

  Hey all,.

  I have a HUGE problem with my 5100-503 Satellite.

  Windows XP connects and then it disconnects right away.

  I found a fix for this at: [url] http://www.mcse.ms/message616432.html {/ url}

  The problem is that I can not boot from a cd, because the BIOS is configured to boot from the hard drive first.

  I get into the BIOS. I read on a few websites on the net than on machines 5xxx Satellite, you can only enter the bios through windows! ..., BUT windows does not work so I can't enter the bios. I can't even use the Windows installation CD when I boot, because once again the HD is set to boot first.

  When I press ESC while turning on the laptop and then press F1, I have the option load default BIOS values. I did, but the HD is still set to start first!

  What I can do... I can't reinstall windows or get into regedit to fix the paper / log problem!

  Help!

  Hi Jamie,

  Normally, you can select a boot device selection menu when you turn on your laptop. You can do this by holding down the F12 key when you turn on. Hold it down until the phone beeps or the device selection menu appears.

  If this does not work then you can try the shortened Toshiba habit that is to hold the 'C' button in the power that would then cause the laptop to boot from the CD drive. Of course, there must be a bootable CD inserted first.

  Kind regards

• Boot from the optical drive on a Lenovo H430

  I try to start on a DVD of Win7, but I am unable to set the boot priority to any type of optical drive in the BIOS. The BIOS boot devices menu is the same. I know that I can use the USB tool, but also, it does not work. Y at - it a patch of Lenovo BIOS that I can ask, or another solution to be able to boot to the optical drive?

  In fact, I realized myself. There was an option in the output menu that allowed for it. Thank you for your help.

• How to boot from the flash drive which has xp to install an OS?

  Boot from the flash drive

  How to start from the flash drive which has xp to install an OS

  the system's model of netbook rlg

  Intel Valérie mgsone

  How to install Windows XP on a Netbook using a USB flash drive
  http://www.TechSpot.com/VB/topic160906.html

  J W Stuart: http://www.pagestart.com

• Can I dwnld copy of OS WinXPpro, burn a DVD to boot on the floppy drive to recover the deadly accident of en using F12 select Boot Drive? I have the s/n Auth/softwr.

  Original title: ask again once-> can I dwnld copy of OS WinXPpro, burn a DVD to boot on the floppy drive to recover the deadly accident of en using F12 select Boot Drive? I have the s/n Auth/softwr.

  Help.

  Dell laptop lock-loops to start in the black & white screen asking me to
  Then select Startup disk
  "dailies" to the next screen which expires just by itself, then
  place a line of BACK code screen, then freezes.
  So, at the start, I can see the option to choose F12 drive start from;
  and of course, I would choose FDD DVD player
  IF I HAD A DRIVE W / THE O/S ON THIS SUBJECT.
  But as John Belushi used to say: "NO-o-o-o-o-o-o!"
  So, can I download a copy of an OEM version of Windows XP - pro (same as mine) and then burn, which load in the floppy drive on the Dell, State zipped/compressed and have the
  BIOS see the disk in the floppy drive and perform a reload of the OS?
  I need to download on my other one cmptr, burn it being dwnld (cause that is a Mac Intel DuoCore).
  And if I can get this Dell pro M/S Windows XP right back, otherwise, we are sick of the trash, THAT M/S imposes on the market as a "finished".
  Help, pls.

  Hello

  You can access the link: how to replace Microsoft or hardware, packs software service to order and replace product manuals: http://support.microsoft.com/kb/326246

• Portege R100 boots from the HARD drive - lack of operating system

  Hello

  I have a Portege R100 which won't the HD boot, I get the message "missing operating system".
  I don't have a compatible CD or floppy, I just about 1.8 inches for the hd, it works and I also have norton ghost 2003 is installed in another computer (a toshiba satellite A45).

  I tried to recover the drive with the help of norton and the image of the Ghost in the recovery CD, but it keep asking for a password.

  I would like to know if there is a way to use the restore with norton CD and usb driver and password screen (or where I can get the password?).

  Thank you!

  What password do you mean?

  and what recovery CD do you use? The image on the Toshiba Recovery CD is locked and cannot be extracted.

  It turns out that you cannot start or install the OS on the USB key!
  You must boot from the CD/DVD compatible player that can be connected to the PC card slot.

• adjustment T61 to boot from the cd drive to install the OS

  My problem started with my T61: alert one halfway BSOD windows loading and then progressed slowly data hard drive get completely corrupt and be... Well, to all intents and purposes empty it.

  I have a windows XP installation disc and want to start form the disk, to format the hard drive and install a new XP installation.

  I can't do that, however, because the BIOS does not allow me to make changes to the boot priority) or anything else.

  I turn the computer with the CD inside and all I get is a black screen with an underscore flashing in the upper left corner.

  I'm away on vacation right now (and for a month) so I can't have a lenovo support center technology or anything.

  Any advice?

  Welcome to the forum!

  Your BIOS password is locked?

• Boot from the external drive via eSATA

  Hi all
  I have an external drive which I'm currently starting as a USB device.  The outside also has an eSATA port that I want to be able to boot from. However, when I go into the bios boot area to choose the boot order, there is no option to start using eSATA, USB only.  The Port of the computer's eSATA/USB port.
  This is so my question, how can I get the bios boot option to be able to select an eSATA?
  Thanks for the help

  From what I can find, HP didn't include the option to boot from the port eSATA on this computer.

  Many others have asked about this on the HP forum.

  I would check with HP support, however, since it is the BIOS that must support this function.

  Windows cannot change it.

  See this thread.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/booting-from-eSATA-HDD/TD-p/140211