My computer does not remember my e-mail address once the computer is turned off and then, even with the box "remember me" checked.

Similar Questions

• Windows does not recognize tv as audio device after it has been turned off and turned back on.

  I have my computer hooked up to a HD TV with the HDMI cable.  The sound also pretended on television.  The HDMI cable is connected to my Radeon HD 6950.  I use Realtek HD Audio Manager with the ATI HMDI default Audio device.  All records are up-to-date.

  When I put my TV off and leave the computer running, I go back and turn on the TV and the computer behaves as the TV is not plugged, but only for audio.  The video is still there.  In the audio playback window, I noticed that Windows would go to the optical audio device, even though there is nothing plugged into this Jack.  I disabled all other devices and left only the HDMI device, so it will not move on.  Now when I turn on the TV it is just like nothing is plugged in at all for the audio.
  Any help is greatly appreciated!

  Hello
   
  1. What is the brand and model of your computer?
   
  2. which edition of Windows are you running?
   
  Example: Windows 7 Professional 32 bit.
   
  It could also be a possibility that a manual entry is required from your TV to the HDMI connection, please check your Menu\setting where the HDMI and PC connection is checked once it is connected to options to switch the Audio and TV screens.
   
  Please follow the steps mentioned below to help solve the problem.
   
  To disable improvements audio speaker

   
  a. open sound by clicking on the Start button, then Control Panel. In the search box, type soundand then click on sound.
   
  b. on the playback tab, click speakers, and then click Properties.
   
  c. click the enhancements tab and then select the check box turn off all the improvements .
   
  If you do not see the enhancements tab in the speakers Properties dialog box, these features are not available for your speakers, and this procedure is not applicable to your computer.
   
  If disabling audio enhancements solves the audio problem you are having, this indicates usually that your audio driver needs to be updated.
  
  Reference:- why don't I hear audio when I connect my computer to a HDTV?
   
  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions
   
  I hope this helps.

• My windows live mail does not send my e-mail address to the live view.

  When I go to my windows live e-mail it dosnt send it it comes up with errors, but I can send email to all of my other sites?

  Hi John,.

  The question you have posted is related to Windows Live mail and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.

  http://www.windowslivehelp.com/product.aspx?ProductID=15

• Hotmail does not save my e-mail address and password from one session to the other

  original title: record the address hotmail and password

  Hotmail does not save my e-mail address and password from one session to another even if I check the boxes to remember my email address and password. Why didn't hotmail is no longer remember my info?  How can I fix this?

  Hello

  I'm sorry, but we cannot help with hotmail problems in these forums in response to vista

  Please repost your question in hotmail in the hotmail link below forums

  http://windowslivehelp.com/product.aspx?ProductID=1

  Forums

  E-mail client and the appliance issues

  Hotmail Sign In questions

  Lost or deleted emails

  People and Contacts

  Reading, writing, and formatting mail

  Sending and receiving mail

  Sign in, and sign to the top and account security

  Using the Hotmail calendar

  Using Web Messenger

   

   

  Consult with Microsoft Certified Solutions

  How to work the views Active Hotmail?

  Your account has been temporarily blocked

  What to do if you can't connect to Windows Live Hotmail

  Compromised account - unauthorized account access

  Reset your Windows Live ID password

  Error when you try to send an e-mail: your message seems to have triggered our spam filters.

  Change your Windows Live ID password

• If the user does not have their e-mail address defined

  Hello
  
  If some users don't have their email address in the fnd_user table, then will goto the user notification work? What should I do to ensure that the workflow is not raise an error in such a situation and always send a notification to this user?
  
  Thank you
  
  Kumar

  Kumar,

  Notifications are assigned to users regardless of the email address they have. If a notification is the target of a user so the user will be able to see it in the list of tasks of notification, as long as the notification is open. Now, if the user turns out to have a valid e-mail address and sender of workflow works correctly then the user will also be sent an e-mail with the content of the notification.

  There is an error or warning if a user does not have an e-mail address; the notification will be always accessible from the task list.

  Kind regards

  Alejandro

• The installation program does not ProPlus.WW\ProPlsWW.cab. Browse to a valid installation source and then click OK.

  I am trying to install the 2007 Office Suite on a computer windows vista laptop.  In the middle of the installation the following code appears:

  The installation program does not ProPlus.WW\ProPlsWW.cab. Browse to a valid installation source and then click OK.

  What should I do to complete the installation.

  Office:

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

  Discussions of general issues of the Office.

  They will help you with your office questions in the newsgroups Office above.

  See you soon.

  Mick Murphy - Microsoft partner

• Illustrator does not recognize my GPU NVIDIA 920 M, what driver is up-to-date. Even with my Intel Graphics 5500 which is recognized, I'm not able to turn the GPU performance. What can I do?

  Illustrator does not recognize my GPU NVIDIA 920 M, what driver is up-to-date. Even with my Intel Graphics 5500 which is recognized, I'm not able to turn the GPU performance. What can I do?

  In addition, all the menus to stay for a while and then disappear. I have to be fast to all operations, including by opening a file, apply an effect or export a file.

  Images:

  

  Jonathan,

  I'm afraid that you are locked into the GPU problem, described by butz in post #13 here:

  https://forums.Adobe.com/message/7773402#7773402

• I was on the internet and my computer automatically turns off and now when I press start for most all my programs do not appear and saying all the folders are empty

  Windows Update no longer works and my computer is extremely slow so

  Hello

  1. have you made changes on the computer recently?

  There is a possibility that another application is at the origin of the conflict with Internet Explorer. Let us check in safe mode with network and then we can check in clean boot to find the root cause of the problem.
  Step A.
  Please check if you are facing the same question when working in mode safe mode with networking.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to boot mode safe mode of Windows Vista with networking.
  e. when Windows starts, use check and Internet explore if the problem persists.
  For more information, refer to the article below.
  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

  Step B.
  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  I hope this helps.

• My Dell laptop battery does not charge. It shows a load zero. I turned off the charger or the battery is dead?

  The OS is Windows Vista and the Studio mode

  Hello

  • It is an old laptop or a new one?
  • What were the changes made before the question deliver?
  You can view these methods:

  Method 1:

  Battery problems are often associated with the battery itself. If you encounter this problem, contact your mobile PC manufacturer. If you purchased the battery separately from the notebook computer, contact the manufacturer of the battery.

  See also:

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-battery-problems

   

  Method 2:
   
  I you suggest stop tha laptop and then try to load and check if she get fully charged.
   
  Also try running the fixit below and check if this may help:
  http://support.Microsoft.com/GP/windows_battery_power_settings
   
  If nothing is done, then I suggest you try to contact the manufacturer of the laptop computer for assistance.
  http://support.Dell.com/

• HP Photosmart premium c310, Windows 7 (64 bit) series will not work afterit is turned off and then on again

  I have photosmart all-in-one c310 printer and whenever we have a power outage, the printer will not print at startup power upward. I have spend hours trying to download drivers or updates and check the printer that says it's fine and the computer that says it can't find the driver. The last 2 times I finally got running again, but I did something different every time and I don't remember what it was. I just spent 2 hours on a hamster wheel keeps back me for a download, after you download it twice, I finally understood was the SAME download (the 3rd time I was directed here) and the printer STILL does not work. I'm pulling my hair out and I'm about to throw this worthless piece of scrap metal by the window. Help!

  Are you connected wireless? If so, you will need to reconnect the printer to the network of the SCW wireless on the printer itself. When you have power, he can hit just the printer off of the network from the router and just reconnect.

• My computer is turned off and when I grew up it is stuck half half reg operation see safe mode.

  My computer turns off on me last night when I was watching new online. Today, I spent 7 hours struggling to make it work. I resorted to the insertion of the disc of windows xp prof so he can start. I ran diagnostic and it seemed to be running. I restarted without.  I can't run essentials of security it is said stopped program.

  I get errors saying that I am mode without failure or other problem with 0x8007042c or 0x4ff02.  When I tried to run "fix" he said found no link. I use firefox because IE does not at all.  Essential security said programs service is stopped.  I can't perform all functions because now everything is connected through it.  You have more link to run the scan of your website independent of my system.  I have bar on bottem of screen showing any window not open or any programs running, when you reduce it quits the program.  It took me 7 hours to get to midway up and running and partially online to find help.  I spent 2 hours to ask and answer found nothing that would work because when I start and etc the next thing I need to find is not there.

  Firefox because IE does not at all.  Essential security said programs service is stopped.  I can't perform all functions because now everything is connected through it.  You have more link

  Bluetooth is an amazing technology which allows you to extend the portability of your computer or mobile phone Toshiba. Bluetooth is easy to use, and connect your mobile device to a Bluetooth device could not

• my computer is turn off and gets very hot after a half hour

  for some time my computer is to do really hot after half an hour when im using it and then after a few minutes its deactivation and I have to wait like 20 minutes because he does not want to go back. It has been like that before, but it's only like 4 times... but now for 1 month it turns off... Please help me.

  Hello

  Question of heat and ventilation. If a PC remove ALL power and reinstall the cards memory and cables (both
  in fact, ends) - remove and replace them - are not just tight. Try adding a small fan blowing in or
  through the ventilation openings.

  If those who don't erase the question that you should seek immediate help from a real computer (no leeks store
  and the glances at a BestBuy or other big box stores) or the manufacturer of your system Support.

  Heat can cause very serious problems with your hardware in order to not try to solve this one more
  minimum without professional technical assistance.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I have xp sp3. When I turn on my computer the screen turns off and then the screen is sometimes off shaped.whats evil?

  I have xp sp3. When I turn it on, it lights up and then the screen stopped occasionally. and after that I cut the screen off, then on again, it turns on but the screen is sometimes alittle bit off. who is wrong?

  Hello

  1. don't you make changes to your computer, after which the issue started?

  I suggest that you follow these steps and check to see if they help.

  Step 1:

  Update of your display drivers and check if this is useful.

  Step 2:

  Reinstall your display drivers, and check if that helps.

  http://support.Microsoft.com/kb/283658

• After Photoshop elements - does not accept Aosta E-mail attributed to the number

  Need help from Adobe - cant get adobe to accept serial numbers

  Contact support directly by phone, chat or web form.

  Mylenium

• My computer is turned off and restarted. Now, it is said, I have 3 days to activate Windows.

  It was activated at least 2 years ago. I don't have the CD with me as I am a foreigner. What should I do to keep my computer running past 3 days? Why do I need the CD or simply enter the reg code?

  You must reactivate your win7. It is a common problem in Windows 7 after installing some software which repairs in regedit. If you can not access your win CD, start CMD in Administrator and run this command

  slmgr-rearm [press ENTER]
  
  
  CMD: Start = > all programs-online accessories-online right click on command prompt, select run as administrator.
  
  
  Now, you have 30 days to activate. find your CD Win7 and active it. If you cannot resolve your problem, write to me at istijlal [at] gmail.com. I'll send you a small program can solve your problem of activation.