My computer keeps freezing on upward. I have Windows 7 OS
My laptop Dell - Vostro 3550 with Windows 7 operating system, keeps freezing upwards each time that I am playing games or even to use e-mail. I already ran a boot cleaning and had reconfigured the knowledge but the problem keep creeping up. I'm not a computer saavy but with a simple mounting in language a layman, I can follow. Thanks in advance.
Tags: Windows
Similar Questions
-
Help! My computer keeps freezing upwards!
My computer keeps freezing, what should I do?
run a scan.
If you have downloaded and installed a prog just before that happens, delete.
try a system restore to a time before prob.
-
Computer keeps freezing and makes strange noises?
For some time my computer keeps freezing and makes weird noises when this happens. I have a laptop Gateway, Windows Vista, Firefox and internet exp.9, AVG for internet seuirty, and I tried system restore to a couple of times to solve this problem. When the computer crashes I have no choice but to restart and then it always ask if I want to start again, but in safe mode. I don't seem to have any problems in safe mode. In addition, the windows updates did not work, they always came as "update failed" it happened all of a sudden. Please, what could be the cause this problem and what are some solutions?
Hello
Follow these methods and check if that helps:
Method 1:
I suggest you to set up your computer in a clean boot state, and check to see if the same problem happens.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Method 2:
Also, follow the steps in the KB articles provided below to improve performance on Windows vista.
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062Method 3: Provide the information to the event log
If the problem persists beyond these steps, then provide the information to the event log to help you.
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
-
My computer keeps freezing, when I'm online. It happens randomly when tube to navigate or go on you. This isn't a hardware problem (new processor etc) I ran the event viewer and stumbled on this... Product details: Windows operating system ID: 615 Source: Security Version: 5.0 component: security event log symbolic name: SE_AUDITID_IPSEC_POLICY_CHANGED Message: IPSec policy agent changed: %1 PolicySource: %2 %3
Can anyone help?
Hello
· What is the number and the model of the computer?
· What is the service pack installed?
· The computer is connected to the network or the field?
· You use internet explore to browse the internet?
· If so, what is the version of the same thing?
I suggest you to run the check, and online virus scan if no malware or viruses detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx
NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)
-
computer keeps freezing. When I restart, it checks for consistency.
original title: computer keeps freezing. When I restart, it checks for consistency. who is wrong?
my computer keeps freezing all the time. When I turn it off and turn it back on I get tell screen
audit system C type NTFS file system for consistency
CHKDSK checking files and index
She then removes and retrieves a number of files. also every now and them my computer just stops saying its to protect my computer.
can someone help and tell me what is the problem and how can I solve this problem?
Here is the correct information on how to set your computer to another date and time.
The other poster told you how to make a backup of files!
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
See you soon.
Mick Murphy - Microsoft partner
-
I can't send emails like 0x8CCC0003 error keeps coming back. I have windows 7
I can't send emails like error0x8CCC0003 keeps popping up. I have windows 7. Help, please.
Thank you
Ray
Hi Ray,
What e-mail client is installed on your computer?
If you use Windows Live Mail, you can post your question in Windows Live Mail support for assistance.
Hope the helps of information.
-
I am trying to install itunes on my computer and it says that I have windows xp SP2? I do understand not wha8t do I do?
Hello
you don't say what operating system you have after referring to xp sp2
Follow the information from apple to the link below
Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.Apple.com/kb/HT1923
Remove and reinstall iTunes, QuickTime, and other software components for Windows XP
http://support.Apple.com/kb/ht1925
and or ask for their support of itunes
http://www.Apple.com/support/iTunes/
Also try the discussions of apple itunes
http://discussions.Apple.com/category.jspa?categoryID=149
If you have xp ask in the forums of xp
Here is the vista forums
Try the forums xp on the link below
http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4
-
my computer keeps freezing at the end of 10 minutes to have.
keeps freezing on my computer!... whenever I turn it on after about 10 or 15 minutes it freezes and it made a sort of niose.like he is stuck.
Hello
- What were the changes made before the issue occur?
- How long have you been faced with this problem?
Do the methods and check if this solves the problem.Method 1:
Step 1: I suggest to start the computer in safe mode and check if the same thing happen, check out the link:Advanced startup options
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
If the problem does not occur in safe mode, you can configure the computer to boot and check if the problem persists. It will start Windows7 by using a minimal set of drivers and startup programs and helps eliminate software conflicts.
Step 2:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: See step 7 for the link to the computer to start as usual after troubleshooting is performed.
Method 2:
I suggest scan SFC (System File Checker) on the system and check if the problem persists. Follow the steps mentioned in the given article.How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
-
error code 1003 and 1015 computer keeps freezing upwards
Hi, I'm on a computer Athlon 2000 + and Windows XP SP3. For these months, my computer kept freezing up and I can only reset it. It happens constantly and resets a half-dozen arrived on the internet, where I can get 5 minutes or 2 hours before it stops again. I've included a few events (see below) copied from the Clipboard. My Event Viewer is full of them, always the same two events. Seems to be something in the registry, but I really don't know enough to do something about it. Can you help me please?
Event type: WARNING
Event source: EvntAgnt
Event category: no
Event ID: 1015
Date: 2010-11-18
Duration: 03:07:46
User: n/a
Computer: ATHLON
Description:
TraceLevel parameter not found in the registry. Trace default level used is 32.Event type: WARNING
Event source: EvntAgnt
Event category: no
Event ID: 1003
Date: 2010-11-18
Duration: 03:07:46
User: n/a
Computer: ATHLON
Description:
TraceFileName parameter not found in the registry. Default trace file used is.Here is information on the events, but maybe it's not your only question... Start with that and then view the side of things:
The messages mean that components of the Simple Network Management Protocol (SNMP) are installed on your system, but have not been fully configured.
Here's the warning messages and no errors (Event Type: warning).
When SNMP tries to start with no details of the configuration, it tries to inform you the settings he needs are not in the registry where one would expect to find the information and he complains. When SNMP tries to start with no parameters, it displays messages similar to this:
Event type: WARNING
Event source: EvntAgnt
Event category: no
Event ID: 1003Description:
TraceFileName parameter not found in the registry. Default trace file used is.She is usually accompanied by an another warning message that looks like this:
Event type: WARNING
Event source: EvntAgnt
Event category: no
Event ID: 1015Description:
TraceLevel parameter not found in the registry. Trace default level used is 32.Using SNMP services in your environment? Most unique computer systems in a domestic environment don't use SNMP but sometimes it gets installed or activated by accident ot trying to solve another network or Internet related issue.
.
If you don't use SNMP, just uninstall it because it is a waste of CPU cycles otherwise productive. If you are using SNMP, you must configure it to have valid startup parameters.You will find Simple Network Management Protocol in apotheosis of Add/Remove Programs, add/remove components Windows, the option of management and monitoring tools, and then click details...
Uncheck SNMP (and the WMI component) If you are not using them and very well your way out and then reboot your system and check the event viewer.
Some warning in Event Viewer messages are excusable when the system boots place... as other services depend on each other to run. Continuous (same warnings) messages in the event viewer are annoying, if you hope that you would see only the White type 'i' of information messages when things are well experienced.
No messages in the event viewer should never defy reasonable explanation.
If your event (s) does not resemble those from above, maybe we should see what looks like your event (s).
Here is how to post an event to the event viewer in a message:
When you double-click on an event, it will open a window of properties with more information. On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.
When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.
If it is your desire, remove any personal information attached (such as user, computer).
To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), then reproduce your problem, then view only the events at the time of your problem.
Do, or do not. There is no test.
I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!
-
original title: computer freezes liked.
My computer is a Packard Bell Imedia 1328. I use Windows XP Home Edition, Service Pack 3. My computer went haywire. It keeps freezing on and does not turn. If I delete an email I've read, he often removes 2 at a time. When I open an email, it appears in a small package on top of the normal size open. I assumed I had a virus for a fulll with Microsoft Security Essentials, Malwarebytes Anti-Malware scan and used the full range of Uniblue Power Suite. No problems have been disclosed but the problem persists. My computer is like me, too old and falling apart, or can it be saved? I am a money, self-taught surfer, step by step in plain English would be appreciated. Thank you very much.
I would recommend not using software uniblue, instead use following:
Make sure your system is clean first. (which I think have made you)
use ccleaner to get rid of junkfiles http://www.piriform.com/ccleaner/download
preform disk cleanup and defragmentation in order to improve the performance of your system.
do not use unistall programs u.
Make sure your windows is uptodate and drivers work correctly and that they are as uptodate.
Use http://www.javacoolsoftware.com/spywareblaster.html to protect your pc against spyware, adware etc and keep it uptodate then use firefox as your browser
only use the block announcement more, no script and WOT for safer web browsing for firefox.
go to msconfig (type in the search box in startmenu then press enter) then prepare your computer to clean boot by disabling all startup items and any of the services of windows, and then restart your computer. See if it makes a difference? If she did then you should know which ones caused to slow down your pc.
minimize your startup programs in msconfig (type in there search box in Start menu, and then press enter)
try to check your drive for errors and also run the SFC (sfc) system through cmd (run cmd as administrator, and then type sfc/scannow)
-
My computer keeps freezing for no apparent reason
Whenever I start my desktop computer, it freezes on the "starting windows" page or as soon as I connect. I then turn off and start windows again normally and it works fine until the next time that I turn it on.
I have cleaned my registy, defragged my hard drive and cross a lot of comprehensive analyses of the computer of moy.I have a 64-bit windows 7.Thanks in advance.Hello
I understand that the computer windows 7 freezes randomly.
1 did you change on your computer before the show?
2 do you have memory devices external USB connected to the computer?
Follow the following troubleshooting methods:
Method 1:
I suggest to put the computer in a clean boot state and then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
To set up the computer in a clean boot, follow the steps in the link: How to perform a clean boot
Note: After checking in the clean boot, follow step: 3 article to reset your computer to normal startup.
Method 2:
Run System File Check to fix the corrupted system files and then check how it works.
See the link "How to use the file system tool Checker to troubleshoot system missing or damaged files on Windows Vista or Windows 7" to run the System File Check.
Note: It can ask the Windows DVD difficulty and allowing SFC to do more than minor repairs. Could some of the files saved on your computer are deleted when fixing corrupted files.
-
computer keeps freezing _
my computer guard freezing when I play farmville.had a tech look and he said too many toolbars installed, and a pop-up blocker was if fixed it but its new gel
Hello
· You play Farmville on Internet Explorer online?
If you play Farmville on line on Internet Explorer and the problem occurs, you can then follow the steps below:
I suggest you run the fix it tool provided in the link below and check if the problem is resolved.
http://support.Microsoft.com/mats/ie_freezes_or_crashes/
You can also try the fix and manual troubleshooting steps described in the link below.
I suggest also refer you to the link provided below for more information on how to uninstall the toolbar in Internet Explorer.
http://www.Microsoft.com/Windows/Internet-Explorer/support/FAQ.aspx
Thank you, and in what concerns:
Naman R - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
Well, do you know if you have Windows Express help on your computer?
Also, do you know if you should have light on your computer microsoft money.
Help!
Windows Express help is a fake created by hackers. REMOVE IT.
http://www.bleepingcomputer.com/virus-removal/remove-Windows-Express-help For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem. -
Why my computer keep imprison? I am running Windows XP
I turned off the Hibernate and standby Modes. He even started doing while entering mode screensaver without any error message.
I think that you have Windows XP Home Edition. Is this correct?
Uninstalling Windows Desktop Search via Add / Remove programs in Control Panel.
Select Start, run, type cmd and press ENTER. Type "chkdsk c: /f /r" without the quotes and press ENTER. Make sure you include the spaces indicated. Enter Y when asked if you want to run chkdsk on restart the computer. Quit and then restart the computer.
Marking bad sectors on a hard disk takes time so be patient. Delimiting does not repair a defective sector. He places pointers to the reader by saying the system not to read or write to these areas that have been damaged.
If the number of defective sectors continued to increase after using the procedure above several times, then you should replace the disk. If an important system file is written to a bad sector, you can corrupt the registry hives and lose the entire contents of the disc.
However if have run chkdsk you not see more new bad sectors, then the reader can work for you for years.
-
I formatted pilots .updated computer fixed my registry and upgraded to ultimate, but always the same someone can advise please
Hello
Looks like you need a real store of the computer (no leeks and glances at a BestBuy or other BigBox
stores) or system manufacturer support.-----------------------------------------------------
Here are the methods to try if you have done a lot:
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista or
Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7 http://www.howtogeek.com/howto/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-windows-7/
Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (update drivers manually using the methods above is preferred
to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to for many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Performance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Maybe you are looking for
-
I forgot the password of my iPad 2 and if it is disabled. When I try to restore it by holding down the home button and plug it into iTunes I chose restore. Everything seems fine until a box pops up asking if I want to allow 'this computer' (macbook
-
DVD will not play on our laptops MS A60
Hello Our school has three laptops Satellite Pro A60, as well as 12 of the different producers. All except the Satellite Pro machines play DVDs through our digital projectors without problem, but we cannot get the A60s Pro to play. We can put in plac
-
Is it possible to copy my files to a USB stick and use it as a backup?
* Original title: computer problem Hi guys, first of all excuse my English because it is not my natural language. My problem is this: I think that my office is stressful on me. It's freezing and sometimes it does not start. I'm trying to back up my f
-
What happened to scan for the HP 3050 software has?
After analysis successfully for 2 years of my HP 3050 has for my Macbook Pro I got a message 'the software for this printer is currently unavailable' on my laptop today when I tried to scan my laptop. And when I press the "Scan" button on the printe
-
I have a track ball 1000 mouse and it is not recognized. How to be recognized?