Is it possible to copy my files to a USB stick and use it as a backup?

Similar Questions

• is it possible to download windows 7 on a USB stick and install it on a computer wiped

  is it possible to download windows 7 on a USB stick and install it on a computer wiped

  Yes, but you must do what is necessary. ISO that you create on a USB bootable copy.

  Prepare the. ISO installation file.

  See the instructions for burning. ISO in Windows 7 or later files:

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-from-an-ISO-file

  You can also use the Microsoft USB/DVD tool, which is recommended for users of Windows XP.

  After getting the file .iso that you use it Microsoft .iso to USB/DVD tool to create a bootable DVD or USB (requires a blank DVD or USB flash to at least 4 GB key).

  

  For UEFI systems based

  If your computer is UEFI, they are normally the systems that come pre-loaded with Windows 8 or later, you need prepare the ISO for such a configuration file or you will receive an error during installation. The USB key must be formatted in FAT32 and use the GPT partitioning scheme. To do this, you must use Rufus, a small tool that you can download for free.

  

  Rufus - credit: Pete bastard/Akeo

  After installing Rufus:

  • Launch it
  • Select the ISO Image
  • Point to the file ISO for Windows 10
  • Check create a disk bootable using
  • Select GPT partitioning to EUFI firmware as the Partition scheme
  • Choose FAT32 NOT NTFS as file system
  • Make sure that your USB in the device list
  • Click Start
  • Close when you are finished

  Begin the installation.

  The following describes the standard way to start the installation, especially if you are in dual boot a 64-bit version of Windows 10 alongside a 32-bit version of Windows. Another way is to start from a version of runing Windows installation and select the partition where you want to install Windows 10. See below for instructions how.

  For information about how to modify your BIOS options to boot from the DVD drive, see the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  

  Once your computer is configured to boot from the DVD, you should see this option.

  If you are installing from a USB key, see the instructions below how prepare your computer to boot from a:

  http://Windows.Microsoft.com/en-NZ/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

• Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro?

  Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro? I need these PDF files transferred my I touch pro. Any suggestions?  Please

  Thank you

  Mike Tingey

  The iPad does not support USB keys. There are some wireless flash drives that can be used, but not the classical records. I suggest you transfer files to a computer and their synchronization then back to the iPad via iTunes.

• How to know if someone copied a file on a USB?

  If you have a person who you think access to your USB key, how do you know if they copied a file from your USB key on his computer?

  Hello

  Unfortunately, there is no way we would know that someone has copied contacts from the flash drive on your computer.

• Need to copy audio files from a USB on the computer for transcription - how to sync and keep the original audio files on USB?

  Have the transcript very important things to do; usually get audio on the discs, but this time I had rec on a USB - has never worked with USB before, and I don't know how I copy the files on the USB key to an audio file in my computer through Windows Media.  Really of what I can do something wrong and erase/delete files on the USB key if I don't know what I'm doing.  I guess I "sync", but could someone please give me step by step on how it's done with Vista?  As you can summize, I'm "technically not contested."

  Thank you.

  Hi Tech Mom,

  If you copy and paste a file or folder, it does not get deleted in the source location. It gets deleted in the source location when you cut and paste the file or folder. The article below explains how to copy and paste a file or folder.

  Copy a file or folder
  http://Windows.Microsoft.com/en-us/Windows-Vista/copy-a-file-or-folder

  See question 5^th from the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I just copy a file by ctrl + c then I'll stick with ctrl + v, that after I copy the file (b) by ctrl + c and paste ctrl + v and once again if I need to paste everything first: to leave what shortcut I use

  I just copy a file by ctrl + c then I'll stick with ctrl + v, that after I copy the file (b) by ctrl + c and paste ctrl + v and still, if I need to paste everything first: to leave what short cut I have we

  On Mon, 24 Sep 2012 15:49:08 + 0000, ajay8055 wrote:

  I just copy a file by ctrl + c then I'll stick with ctrl + v, that after I copy the file (b) by ctrl + c and paste ctrl + v and still, if I need to paste everything first: to leave what short cut I have we

  You can't do it without third-party software. Just go back and
  Copy the file (a).
  Ken Blake, Microsoft MVP

• Anyone know if its possible to install Windows thin PC on a Mac and use it as a thin client Windows?

  Anyone know if its possible to install windows thin PC on a Mac and use it as a client lightweight windows? I know you must have a license for the ASO install Win TPC for free but you can purchase the license to install it on products that do not have currently a copy of Windows to this topic. Web only if its possible to do it on a Mac. Thanks in advance.

  original title: windows thin pc on Mac

  Hello Stephen Safranek,

  The question you posted would be better suited on the TechNet support forum. I suggest you to post the question on the link:

  http://social.technet.Microsoft.com/forums/en-us/newThread?Forum=MDT

• When I try to print a PDF file it does not print and goes directly to a backup of the file option.

  When I try to print a PDF file it does not print and goes directly to a backup of the file option

  original title: pdf print
  Hello

  1. don't you make changes on the computer before the show?
  2. don't get any error message?
  3. what version of the operating system is installed on the computer?
  4 is the issue limited exclusively with printing PDF files?
  5. where are you printing from PDF files?
  6. What is the brand and model of the printer?

  
  Method 1:
  Run the fix it and check.
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
  
  Method 2:
  Perform the steps from the link and check.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  
  Method 3:
  You can perform the steps from the link and check if you are able to print.
  Resolve PDF printing problems. Acrobat, Reader
  http://kb2.Adobe.com/CPS/873/cpsid_87346.html
  
  Reference link:
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• How is it possible to copy a playlist on a USB?

  My new car audio system has a USB port and is supposed to be able to play music from a USB 'peripheral '. So, I try to understand how to copy a mix of songs on a USB key. I made a playlist with songs in the order I want. Then I copied the files on the disk. I tried in my car, but it does not seem to recognize the drive. I tried to export the playlist, but all this did was to create a text file.

  I could just burn songs to a CD, but CD is not very good. I want songs much more than that and don't want to have to keep changing CD. So, how can I make a playlist that is playable from a USB?

  Hello

  Turingtest2 has a solution in this thread, but it seems a little complicated. Copy playlist to USB?

• Is it possible to copy an installation from a USB disc?

  How to take a Setup for any program disk and copy its contents to a USB port so that it becomes a USB facility?  In other words, can you do a USB install program that comes on a disk?

  Edit: if it was a purchased CD which is protected against copying?  And every CD you buy protected against copying?

  Copy and paste all the files to USB.  Right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.  If there is no Setup.exe, click the .msi file and follow the prompts.

  It may be necessary to show both hidden and system files and also uncheck 'Hide known file types' in Control Panel / folder Options / discovers, for access to, or see, the mentioned files and their file types (extensions).

  Auto connecting USB is not readily available due to security issues, so it will be manual installs.

  Control Panel\All Control Panel Items\AutoPlay include other options that are available to you.

• Attach the pdf file to the e-mail and use text body field

  I'm looking to create a form with a button 'submit' at the bottom.  When you click the button submit, I would e-mail window to open with a predefined recipient, and the pdf file attached.  I found the code to achieve this using this.mailDoc)

  However:

  I hope also to get the text field 'Name' of my screen and use it in the body of the e-mail message.

  I found the following code in another post, which seems to work for this:

  var cClientName = this.getField("ClientName").value;

  cAddress var = this.getField("Address").value;

  
  

  cbody var = ' Customer Information: \n\n ";

  cbody += "name:"+ cClientName + "\n"; '.

  cbody += "address:"+ cAddress + '\n'; '.

  
  

  var myURL = "mailto: . " [email protected] ? subject = Customer Info & body =";

  myURL += cbody;

  
  

  app.launchURL (myURL, true);

  
  

  That will open a window of e-mail with a body that contains the data of AcroForm fields named "ClientName" and "Address".

  The problem is that this code will not work the pdf.

  How can I get the best of both worlds?

  Thank you!

  You don't need launchURL to achieve this goal. mailDoc is capable of setting of the

  subject line, body of the email, the lists of beneficiaries, etc.

  See this tutorial for a detailed explanation:

  http://acrobatusers.com/tutorials/dynamically-setting-submit-e-mail-address

• Windows Explorer hangs when copying large files on external USB drive

  I'm trying to copy files over 1 GB of my pc to a WD MyBook external drive. After about 10% on the progress indicator, Windows Explorer crashes. When I cancel the work, nothing happens until I unplug the USB. Then I have the pc returns to normal.

  During my research, I discovered that a lot of people have this problem. I have tried many suggestions, but without result. The last thing I tried was a full format the C: drive with a fresh install of Vista. Copy a large file gave me the message 'Calculating time' infinite. After you have installed SP1 reappeared the problem as explained above.

  Some of the things I've tried:
  check the external hard drive: no problem found and the problem occurs on all my MesLivres 3
  safe mode
  Superfetching disabled
  update the motherboard bios

  Now my last request resource helps professionals. If I don't find a solution I'll have to go back to XP, achieve Win7 or one rating for Mac... a lot of things to think about.

  Best regards
  Rafael

  Try to copy in safe mode. If can be a slow usb port. Try anther one.

  Good luck.

  Exp. comes from http://www.computerstar.ca/

• Is it possible possible to recover a file that was not recorded and lost the computer restarted unexpectedly?

  My sister has been grabbing a paper and had saved only the first paragraph.  It almost made with it, restart the computer.  It is a Microsoft Word file.  Could possibly exist somewhere?

  Hi LauraGardiner,

  See the following article:

  http://support.Microsoft.com/kb/316951

  I hope this helps!

• Is it possible to copy my Windows 7 preinstalled on DVD to use to reinstall?

  CAN I COPY MY OPERATING ALREADY INSTALLED SYSTEM WINDOWS 7, WHICH IS PRE INSTALLED ON MY LAPTOP ON A DVD, SO I CAN USE IT TO REINSTALL?

  You can use the software Acronis True Image to create an image of 'drive '.  A disk image copies the entire drive to an "image" file or a DVD series.  However, you should note that when you use this disk image, it will completely erase the hard drive and the "hard drive" "installed" image from the date / time the image was made.